Overview of ECE diagnostics on LHD

Electron cyclotron emission calibration with Thomson scattering using a wide scan of toroidal magnetic field of KSTAR

The Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak is capable of operating at a wide range of toroidal magnetic fields up to 3.5 T at the major radius. The electron cyclotron emission (ECE) diagnostic on KSTAR is required to cover a broad frequency range for electron temperature profile measurements in both the low and high field sides. To meet these broadband requirements, the ECE system consists of W-band (78-110 GHz) and D-band (110-162 GHz) heterodyne radiometers. The two radiometers are connected to 28 and 48 detection channels, respectively. However, since the absolute ECE calibration based on the hot-cold calibration has been very challenging, an alternative method of calibration was performed using Thomson scattering measurements and varying toroidal magnetic fields. As the toroidal magnetic field is scanned from 1.6 to 3.2 T in steps of 0.2 T, most of the 76 ECE channels are calibrated relatively by the electron temperature values of Thomson scattering in a narrow region (0.2 < r/a <0.6). In this article, the methodological details of the ECE calibration are described. In addition, to demonstrate the robustness of the ECE calibration factors, the calibrated electron temperature profiles from ECE measurements are compared with the ion temperature profiles in terms of the plasma position as the plasma positon shifts outward.

New Q and V-band ECE radiometer for low magnetic field operation on LHD

To meet the demand for information on electron temperature fluctuations in low magnetic field experiments in the Large Helical Device (LHD), a new ECE radiometer covering the Q and V bands has been installed. Combination mirrors are installed in the vacuum vessel to focus the beam and efficiently propagate the radiated electron cyclotron waves. Notch filters are used to eliminate stray light from the gyrotron, and a 32-channel heterodyne radiometer is constructed using a filter bank system. As a result, oscillations of electron temperature and both electromagnetic and electrostatic fluctuations were successfully observed.

Sawtooth oscillation in current-carrying plasma in the large helical device

Sawtooth oscillations have been observed in current-carrying helical plasmas by using electron-cyclotron-emission diagnostics in the Large Helical Device. The plasma current, which is driven by neutral beam injection, reduces the beta threshold of the sawtooth oscillation. When the central q value is increased due to the plasma current, the core region crashes, and, when it is decreased, the edge region crashes annularly. Observed rapid mixture of the plasma in the limited region suggests that these sawtooth crashes are reconnection phenomena. Unlike previous experiments, no precursor oscillation has been observed.