Metal sols as a useful tool for heterogeneous gold catalyst preparation: reinvestigation of a liquid phase oxidation

Impact of the Experimental Parameters on Catalytic Activity When Preparing Polymer Protected Bimetallic Nanoparticle Catalysts on Activated Carbon

Sol immobilization is used to produce bimetallic catalysts with higher activity to monometallic counterparts for a wide range of environmental and commercial catalytic transformations. Analysis of complementary surface characterization (XPS, Boehm's titration, and zeta potential measurements) was used to elucidate alterations in the surface functionality of two activated carbon supports during acid exposure. When considered in parallel to the experimentally determined electrostatic and conformational changes of the polymer surrounding the nanoparticles, an electrostatic model is proposed describing polymer protected nanoparticle deposition with several polymer-carbon support examples described. Consideration of the electrostatic interactions ensures full deposition of the polymer protected nanoparticles and at the same time influences the structure of the bimetallic nanoparticle immobilized on the support. The normalized activity of AuPd catalysts prepared with 133 ppm H₂SO₄ has a much higher activity for the direct synthesis of hydrogen peroxide compared to catalysts prepared in the absence of acid. Detailed characterization by XPS indicates that the surface becomes enriched in Au in the Au-Pd samples prepared with acid, suggesting an improved dispersion of smaller bimetallic nanoparticles, rich in Au, that are known to be highly active for the direct synthesis reaction. Subsequent microscopy measurements confirmed this hypothesis, with the acid addition catalysts having a mean particle size ∼2 nm smaller than the zero acid counterparts. The addition of acid did not result in a morphology change, and random alloyed bimetallic AuPd nanoparticles were observed in catalysts prepared by sol immobilization in the presence and absence of acid. This work shows that the deposition of polymer protected AuPd nanoparticles onto activated carbon is heavily influenced by the acid addition step in the sol immobilization process. The physicochemical properties of both the polymer and the activated carbon support should be considered when designing a bimetallic nanoparticle catalyst by sol immobilization to ensure the optimum performance of the final catalyst.

Titanium-Anchored Gold on Silica for Enhanced Catalytic Activity in Aqueous Ethanol Oxidation

The heterogeneously catalyzed oxidation of bioethanol offers a promising route to bio-based acetic acid. Here, we assess an alternative method to support gold nanoparticles, which aims to improve selectivity to acetic acid through minimizing over-oxidation to carbon dioxide. The most promising support system is 5 wt % titanium on silica, which combines the high surface area of silica with the stabilizing effect of titania on the gold particles. Compared to gold–silica systems, which require a complex synthesis method, small quantities of titanium promoted the formation of gold nanoparticles during a simple deposition–precipitation. Characterization of the catalyst with X-ray absorption spectroscopy shows that titanium is highly dispersed in the form of small, possibly dimeric, titanium(IV) structures, which are isolated and stabilize gold nanoparticles, possibly minimizing sintering effects during synthesis. The size of the gold particles depends on the pre-treatment of the titanium–silica support before gold deposition, with larger titanium structures hosting larger gold particles. Acetic acid yield over the titanium–silica-supported gold systems improved by about 1.6 times, compared to pure titania-supported gold. The high activity of those catalysts suggests that bulk, crystalline titania is not required for the reaction, encouraging the use of mixed supports to combine their benefits. Those support systems, besides improving selectivity, offer high surface area and a low-cost filler material, which brings ethanol oxidation one step further to the industry. Additionally, the low loading of titanium permits studying the reaction mechanisms on the gold–titanium interface with bulk characterization techniques.

Poly (Vinyl Alcohol) Assisted Synthesis and Anti-Solvent Precipitation of Gold Nanoparticles

Gold nanoparticles (GNPs) are commonly synthesized using the Turkevich method, but there are limitations on the maximum concentration of gold nanoparticles that can be achieved using this method (often < 1 mM (=0.34 mg/mL) gold precursor loading). Here, we report an inverse Turkevich method which significantly increases the concentration of gold nanoparticles (up to 5-fold) in the aqueous phase by introducing poly (vinyl alcohol) (PVA) to the synthesis system for stabilization. The aim of this study is to understand the effect of PVA and other synthesis parameters, such as trisodium citrate and tetrachloroauric acid concentration, with the goal of maximizing concentration while maintaining gold nanoparticle morphology, stability, and narrow size distribution. The size distribution of GNPs is investigated for a range of parameters by dynamic light scattering and electron microscopy, and ultraviolet-visible (UV–vis) spectroscopy is also utilized to explore the localized surface plasmon resonance (LSPR). Further, the interaction between GNPs and PVA is investigated by Fourier-transform infrared spectroscopy. In addition to increasing the gold loading by varying synthesis parameters, we also develop a novel anti-solvent precipitation method for the PVA-coated GNPs, which enables continuous condensation and purification of GNPs by forming a gold/PVA nanocomposite.

Catalytic Vapor Phase Oxidation of Glycerol to Glyceric Acid Over Activated Carbon Supported Gold Nanocatalysts

A series of activated carbon (AC) supported Au nanocatalysts with different loadings of Au were prepared by using the homogeneous deposition–precipitation (HDP) method. The samples were characterised with myriad techniques such as X-ray diffraction (XRD), CO-chemisorption, N2 adsorption–desorption measurements, transmission electron microscopy (TEM), inductively coupled plasma-optical emission spectrometer (ICP-OES) and X-ray photoelectron spectroscopy (XPS) to understand the structural and textural properties in detail. The catalysts were tested for the vapour phase oxidation of glycerol to glyceric acid under base-free medium in an aerobic condition at normal atmospheric pressure. The Au/AC nanocatalysts with smaller size Au particles ([Formula: see text][Formula: see text]nm) showed higher glycerol conversion and selectivity for glyceric acid, and also a longer catalyst life. While the larger Au particles ([Formula: see text][Formula: see text]nm) showed less activity and selectivity. Among all the nanocatalysts tested, the 1.0[Formula: see text]wt.% Au/AC sample having smaller particle size of Au showed the best catalytic performance in terms of glycerol conversion and glyceric acid selectivity. These results suggest that the oxidation activities of Au/AC nanocatalysts are strongly influenced by the size of Au nanoparticle, nature of the support material and through a metal-support interaction.

The Influence of the Gold Particle Size on the Catalytic Oxidation of 5-(Hydroxymethyl)furfural

For the production of chemicals from biomass, new selective processes are required. The selective oxidation of 5-(Hydroxymethyl)furfural (HMF), a promising platform molecule in fine chemistry, to 2,5-furandicarboxylic acid (FDCA) is considered a promising approach and requires the oxidation of two functional groups. In this study, Au/ZrO2 catalysts with different mean particle sizes were prepared by a chemical reduction method using tetrakis(hydroxymethyl)phosphonium chloride (THPC) and tested in HMF oxidation. The catalyst with the smallest mean particle size (2.1 nm) and the narrowest particle size distribution was highly active in the oxidation of the aldehyde moiety of HMF, but less active in alcohol oxidation. On the other hand, increased activity in FDCA synthesis up to 92% yield was observed over catalysts with a larger mean particle size (2.7 nm), which had a large fraction of small and some larger particles. A decreasing FDCA yield over the catalyst with the largest mean particle size (2.9 nm) indicates that the oxidation of both functional groups require different particle sizes and hint at the presence of an optimal particle size for both oxidation steps. The activity of Au particles seems to be influenced by surface steps and H bonding strength, the latter particularly in aldehyde oxidation. Therefore, the presence of both small and some larger Au particles seem to give catalysts with the highest catalytic activity.

Piperazine-promoted gold-catalyzed hydrogenation: the influence of capping ligands

The presence of capping ligands can block the adsorption of the amine ligand on gold NPs, preventing the formation of a ligand–metal interface able to activate H₂ for selective hydrogenation reactions.

The Effect of Polymer Addition on Base Catalysed Glycerol Oxidation Using Gold and Gold–Palladium Bimetallic Catalysts

Abstract

The oxidation of glycerol represents both a viable route to catalytic upgrading of biomass and has become a model reaction for catalytic polyol oxidation. Gold and gold–palladium nanoparticle catalysts prepared by colloidal methods involving polymer additives have been extensively studied. However, the effect of residual polymer at the catalyst surface on reaction pathways has not been decoupled from particle size effects. We show that when using catalysts prepared without polymer stabilisers the addition of either polyvinyl alcohol or polyvinylpyrrolidone to the reaction changes the reaction rate and results in a change in reaction selectivity. We conclude that the polymer additive has a significant effect on the reaction pathway and that these systems should be considered as a metal surface–polymer interface catalytic systems and properties should not be rationalised solely based on nanoparticle size.

Graphic Abstract

Supported Gold Nanoparticles as Catalysts for the Oxidation of Alcohols and Alkanes

Supporting gold nanoparticles have shown to be extremely active for many industrially important reactions, including oxidations. Two representative examples are the oxidation of alcohols and alkanes, that are substrates of industrial interest, but whose oxidation is still challenging. This review deals with these reactions, giving an insight of the first studies performed by gold based catalysts in these reactions and the most recent developments in the field.

The Success Story of Gold-Based Catalysts for Gas- and Liquid-Phase Reactions: A Brief Perspective and Beyond

Gold has long held the fascination of mankind. For millennia it has found use in art, cosmetic metallurgy and architecture; this element is seen as the ultimate statement of prosperity and beauty. This myriad of uses is made possible by the characteristic inertness of bulk gold; allowing it to appear long lasting and above the tarnishing experienced by other metals, in part providing its status as the most noble metal.

The selective hydrogenation of furfural over supported palladium nanoparticle catalysts prepared by sol-immobilisation: effect of catalyst support and reaction conditions

Pd-TiO₂ nanoparticles prepared by sol-immobilisation are very active for selective hydrogenation of furfural under mild conditions, and addition of Pt enhances performance to achieve a 95% yield of tetrahydrofurfuryl alcohol.

Gold Nanoparticle-Decorated Diatom Biosilica: A Favorable Catalyst for the Oxidation of d-Glucose

Diatoms are unicellular algae of enormous biodiversity that occur in all water habitats on earth. Their cell walls are composed of amorphous biosilica and exhibit species-specific nanoporous to microporous and macroporous patterning. Therefore, diatom biosilica is a promising renewable material for various applications, such as in catalysis, drug-delivery systems, and biophotonics. In this study, diatom biosilica of three different species (Stephanopyxis turris, Eucampia zodiacus, and Thalassiosira pseudonana) was used as support material for gold nanoparticles using a covalent coupling method. The resulting catalysts were applied for the oxidation of d-glucose to d-gluconic acid. Because of its high specific surface area, well-established transport pores, and the presence of small, homogeneously distributed gold nanoparticles on the surface, diatom biosilica provides a highly catalytically active surface and advanced accessibility to the active sites. In comparison to those of the used reference supports, higher catalytic activities (up to 3.28 × 10^-4 mmol_Glc s^-1 mg_Au ^-1 for T. pseudonana biosilica) and slower deactivation were observed for two of the diatom biosilica materials. In addition, diatom biosilica showed very high gold-loading capacities (up to 45 wt %), with a homogeneous nanoparticle distribution.

Effect of Au nano-particle aggregation on the deactivation of the AuCl3/AC catalyst for acetylene hydrochlorination

A detailed study of the valence state and distribution of the AuCl3/AC catalyst during the acetylene hydrochlorination deactivation process is described and discussed. Temperature-programmed reduction and X-ray photoelectron spectral analysis indicate that the active Au(3+) reduction to metallic Au(0) is one reason for the deactivation of AuCl3/AC catalyst. Transmission electron microscopy characterization demonstrated that the particle size of Au nano-particles increases with increasing reaction time. The results indicated that metallic Au(0) exhibits considerable catalytic activity and that Au nano-particle aggregation may be another reason for the AuCl3/AC catalytic activity in acetylene hydrochlorination.

Gold-Based Catalysts

The discovery of the catalytic power of gold, always regarded as inert, dates back to the early 1990s. The keystone is the nanometric scale: only when bulk gold was found to be dramatically enhanced when downsized to nanometric particles did its extraordinary catalytic activity definitely come out and it still continues to show more of this peculiarity. This represented a breakthrough in chemistry, especially in organic synthesis, allowing catalyzed selective oxidations of various substrates to be carried out to give important chemicals under green conditions. Gold, alone or alloyed with a second metal, has turned out to be particularly effective in the selective oxidation of different alcohols, which can be tuned to their carbonylic and carboxylic derivatives. In this chapter, an overview of the aerobic oxidation of alcohols carried out with supported gold-based catalysts in the liquid phase is presented, with a particular focus on substrates of interest such as glycerol and allyl alcohol. Some vapor-phase processes worthy of mention are also included, plus a section introducing the main methods of preparation of gold-based catalysts and their characterization.

Titanium dioxide as a catalyst support in heterogeneous catalysis

The lack of stability is a challenge for most heterogeneous catalysts. During operations, the agglomeration of particles may block the active sites of the catalyst, which is believed to contribute to its instability. Recently, titanium oxide (TiO₂) was introduced as an alternative support material for heterogeneous catalyst due to the effect of its high surface area stabilizing the catalysts in its mesoporous structure. TiO₂ supported metal catalysts have attracted interest due to TiO₂ nanoparticles high activity for various reduction and oxidation reactions at low pressures and temperatures. Furthermore, TiO₂ was found to be a good metal oxide catalyst support due to the strong metal support interaction, chemical stability, and acid-base property. The aforementioned properties make heterogeneous TiO₂ supported catalysts show a high potential in photocatalyst-related applications, electrodes for wet solar cells, synthesis of fine chemicals, and others. This review focuses on TiO₂ as a support material for heterogeneous catalysts and its potential applications.

Base-free oxidation of glycerol using titania-supported trimetallic Au–Pd–Pt nanoparticles

Base-free selective oxidation of glycerol has been investigated using trimetallic Au–Pd–Pt nanoparticles supported on titania and their corresponding bimetallic catalysts. Catalysts were prepared by the sol-immobilization method and characterized by means of TEM, UV/Vis spectroscopy, diffuse reflectance infrared fourier transform spectroscopy, X-ray photoelectron spectroscopy, and microwave plasma–atomic emission spectroscopy. It was found that of the bimetallic catalysts, Pd–Pt/TiO2 was the most active with high selectivity to C3 products. The addition of Au to this catalyst to form the trimetallic Au–Pd–Pt/TiO2, resulted in an increase in activity relative to Pd–Pt/TiO2. The turnover frequency increased from 210 h(−1) with the Pd–Pt/TiO2 catalyst to378 h(−1) for the trimetallic Au–Pd–Pt/TiO2 catalyst with retention of selectivity towards C3 products.

Gold colloids: from quasi-homogeneous to heterogeneous catalytic systems

Ruby red colloids of gold have been used for thousands of years and in the past have attracted much attention due to their optical properties. Surface plasmon resonance (SPR) bands are responsible for gold colloid colors and typically appear for nanometer-sized gold nanoparticles (GNPs). These lie in the visible range and their position (and intensity) depends on the size, distribution of size, and shape of GNPs but also on their interaction with other materials (i.e., support). Scientists consider colloids as quasi-homogeneous systems, but because of their intrinsic thermodynamic instability, they need different capping agents providing sufficient stability. The strength and the nature of the interaction between the protective (or functionalizing) molecule and the GNP surface is of utmost importance. It can determine the catalytic properties of the nanoparticles, as they mainly interact with the active sites, thus interfering with reactant. Therefore, the protective layer should contribute to the colloid stability, but at the same time, it should not be irreversibly adsorbed on the active site of the GNP surface providing convenient accessibility to reactant. From a catalytic point of view, the milder the interaction is between the particle surface and the capping agent, the more the activity increases. Unfortunately, the reaction conditions often do not allow the required stability of GNPs, which constitutes a fundamental prerequisite for stable catalytic activity. Anchoring GNPs on suitable supports can circumvent the problem, and this technique is now considered a valuable alternative to classical methods to produce highly dispersed gold catalysts. In this Account, we describe the advantages in using this technique to produce gold heterogeneous catalysts of high metal dispersion on a large variety of supports with the possibility of tuning to a large extent the size and (even partially) the shape of GNPs. We also review our recent progress on the sol-immobilization technique. Specifically, we highlight how, depending on its nature, the protective agent not only mediates the activity of GNPs in alcohol oxidation process but also actively participates in the anchoring process and to the stability of GNPs depending on the support surface. We can also use the modification of the metal surface operated by the capping agent to prepare bimetallic species and influence the surface potential, which modifies the intrinsic activity of the GNP. In conclusion, this technique implies many contributions (sometimes not yet clarified factors) that are not simply concerning dimension and dispersion of GNPs or type of support. Chemists should make careful selection of the protective agent and reaction parameters depending on which support is used in which reaction.

A novel and highly sensitive gaseous n-hexane sensor based on thermal desorption/cataluminescence

A novel and highly sensitive sensor for gaseous n-hexane utilizing the sensing material Y₂O₃–Al₂O₃ has been developed based on thermal desorption/cataluminescence (TD/CTL) combined with response surface methodology (RSM).

Volcano-shape glycerol oxidation activity of palladium-decorated gold nanoparticles

Activity and selectivity of glycerol oxidation were highly dependent upon Pd surface coverage of Pd-on-Au bimetallic catalysts.