Electrokinetic investigations of charged porous membranes

Interpretation of electrokinetic measurements with porous films: role of electric conductance and streaming current within porous structure

It is shown that in tangential electrokinetic measurements with porous films the porous structure makes contribution not only to the cell electric conductance (as demonstrated previously) but also to the observed streaming current. Both of these contributions give rise to dependences of streaming-potential and streaming-current coefficients on the channel height. However, due to the combined contribution of two phenomena, the dependence of streaming-potential coefficient on the channel height may be rather complicated and not allow for simple extrapolation. At the same time, the dependences of streaming-current coefficient and cell electric conductance on the channel height turn out linear and can be easily extrapolated to zero channel heights. This enables one to determine separately the contributions of external surface of porous film and of its porous structure to the streaming current and of the channel and porous structure to the cell electric conductance. This procedure is illustrated by the measurements of tangential electrokinetic phenomena and electric conductance with Millipore mixed-cellulose membrane filters of various average pore sizes (from 0.025 to 5 mum) in the so-called adjustable-gap cell of SurPASS electrokinetic instrument (Anton Paar GmbH). The design of this cell allows for easy and quasi-continuous variation of channel height as well as accurate determination of cell electric conductance, streaming-current coefficient, and channel height (from the cell hydraulic permeability). The quality of linear fits of experimental data has been found to be very good, and thus, the extrapolation procedures were quite reliable and accurate. Zeta-potentials could be determined of both external film and internal pore surfaces. It is demonstrated that the porous structures make considerable contributions to both streaming-current coefficient and cell electric conductance especially in the case of filters with larger pores. It is also found that, rather surprisingly, in filters with smaller pores the reduction in the filter electric conductivity turns out essentially stronger than could be expected proceeding from the filter porosity.

Biomass/adsorbent electrostatic interactions in expanded bed adsorption: a zeta potential study

Expanded bed adsorption is an integrated technology that allows the introduction of particle-containing feedstock without the risk of blocking the bed. The biomass particles contained in the feedstock have to be treated as an integral part of the process and potential interactions between suspended biomass and the adsorbent must be excluded during process design. Because the electrostatic forces dominate the interactions between the biomass and adsorbent, the zeta potential has been studied as a tool to characterize biomass/adsorbent electrostatic interactions. The zeta potentials of four types of biomass (yeast intact cells, yeast homogenate, Escherichia coli intact cells, and E. coli homogenate) and two types of ion exchanger were measured systematically at varying process conditions. Using the cell transmission index from biomass pulse-response experiments as a parameter, the relations between zeta potential and the biomass/adsorbent interaction were evaluated. Combining the influences from zeta potential of adsorbent (zeta(a)), zeta potential of biomass (zeta(b)), and biomass size (d), parameter (-zeta(a)zeta(b)d) was found to be an appropriate indicator of the biomass/adsorbent interactions in expanded beds under various liquid-phase conditions for different types of biomass. The threshold value of parameter (-zeta(a)zeta(b)d) can be defined as 120 mV(2) microm for cell transmission of >90%, which means that systems with (-zeta(a)zeta(b)d) < 120 may have a considerable probability of forming stable expanded beds in a biomass suspension under the particular experimental conditions.