Manufacturing factors affecting the drug delivery function of thermo-responsive membrane prepared by adsorption of binary liquid crystals

Thermoresponsive gating membranes embedded with liquid crystal(s) for pulsatile transdermal drug delivery: An overview and perspectives

Due to the circadian rhythm regulation of almost every biological process in the human body, physiological and biochemical conditions vary considerably over the course of a 24-h period. Thus, optimal drug delivery and therapy should be effectively controlled to achieve the desired therapeutic plasma concentrations and therapeutic drug responses at the required time according to chronopharmacological concepts, rather than continuous maintenance of constant drug concentrations for an extended time period. For many drugs, it is not always necessary to constantly deliver a drug into the human body under disease conditions due to rhythmic variations. Pulsatile drug delivery systems (PDDSs) have been receiving more attention in pharmaceutical development by providing a predetermined lag period, followed by a fast or rate-controlled drug release after application. PDDSs are characterized by a programmed drug release, which may release a drug at repeatable pulses to match the biological and clinical needs of a given disease therapy. This review article focuses on thermoresponsive gating membranes embedded with liquid crystals (LCs) for transdermal drug delivery using PDDS technology. In addition, the principal rationale and the advanced approaches for the use of PDDSs, the marketed products of chronotherapeutic DDSs with pulsatile function designed by various PDDS technologies, pulsatile drug delivery designed with thermoresponsive polymers, challenges and opportunities of transdermal drug delivery, and novel approaches of LC systems for drug delivery are reviewed and discussed. A brief overview of all academic research articles concerning single LC- or binary LC-embedded thermoresponsive membranes with a switchable on-off permeation function through topical application by an external temperature control, which may modulate the dosing interval and administration time according to the therapeutic needs of the human body, is also compiled and presented. In the near future, since thermal-based approaches have become a well-accepted method to enhance transdermal delivery of different water-soluble drugs and macromolecules, a combination of the thermal-assisted approach with thermoresponsive LCs membranes will have the potential to improve PDDS applications but still poses a great challenge.

Novel application of Eudragit RL and cholesteryl oleyl carbonate to thermo-sensitive drug delivery system

The Eudragit RL 100 and propylene glycol (PG) membranes with and without cholesteryl oleyl carbonate (COC) were prepared by the solvent casting method to pioneer a novel application of a thermo-sensitive drug delivery system. After that, the properties of these membranes were investigated by thermal, scanning, and porosity studies. Drug permeation studies through all membranes were carried out using salbuthamol sulphate (SBS) at constant temperatures (25°C and 37°C), respectively. The permeability of SBS through the membranes with COC has been shown to be a discontinuous function of temperature, that is, their permeability increased steeply above the phase transition temperature (37°C) of the COC. The thermo-sensitive permeation mechanism for the membranes might be based on the structure change of the membranes caused by the phase transition, so that the membranes could absorb more water. Considering the high biological safety of Eudragit RL 100 and PG membranes with and without COC might be used to develop a novel thermo-sensitive drug delivery system.

Synthesis and evaluation of poly(hexamethylene-urethane) and PEG-poly(hexamethylene-urethane) and their cholesteryl oleyl carbonate composites for human blood biocompatibility

Two new urethane-based acrylates (UAA and PEG-UAA) were synthesized as polymer blocks. The chemical composition of the two monomers was confirmed by IR and NMR. After cross-linking these blockers by radical polymerization, “hexamethylene PU” [poly(hexamethylene-urethane)] and “PEG-hexamethylene PU” [PEG-poly(hexa-methylene-urethane)] were obtained. The platelet adhesion and platelet activation of these polymers were evaluated in the presence of Platelet Rich Plasma (PRP) blood. The relative blood clotting indexes of the polymers were determined to measure their capability of reducing thrombogenicity. The hemolysis of red blood cells was also assessed to examine the haemocompatibility of the polymers. The hexamethylene PU and PEG-hexamethylene PU showed less platelet adhesion, platelet activation, blood clotting and hemolysis than a commercial PU (Tecoflex). The liquid crystal molecule, cholesteryl oleyl carbonate (COC), showed further improved biocompatibility to human blood, after COC was embedded in the PU polymers. PEG-hexamethylene PU + 10% COC demonstrated the best activity in reducing thrombogenicity and the best haemocompatibility. The inclusion of PEG segments into the PEG-UAA structure increased its hydrophilicity. The methylene bis(cyclohexyl) segments in Tecoflex PU decreased haemocompatibility. These observations are in good agreement with performed contact angle measurements. The PEG-hexamethylene PU loaded with COC might be a promising material for applications in bioengineering.

Temperature modulated drug permeation through liquid crystal embedded cellulose membranes

Stimuli-sensitive membranes may act as "on-off switches" or "permeability valves", producing patterns of pulsatile release, where the period and rate of mass transfer can be controlled by external or environmental triggers. In this study, cellulose nitrate (CN) and cellulose acetate (CA) monolayer membranes containing thermotropic liquid crystals (LC) were developed as thermoresponsive barriers for drug permeation. A low molecular thermotropic LC, n-heptyl-cyanobiphenyl (K21), with nematic to isotropic phase transition temperature (T(n-i)) of 41.5 degrees C was chosen to modulate drug permeation. Methimazole and paracetamol as hydrophilic and hydrophobic drug models were used, respectively. It was found that upon changing the temperature of the system around the T(n-i), both cellulose membranes without LC showed no temperature sensitivity to drug permeation, whereas the results for LC entrapped membranes exhibited a distinct jump in permeability when temperature was raised to above the T(n-i) of the liquid crystal for both drug models. On the other hand, drug permeation through these LC embedded membranes can be thermally modulated. Thermoresponsive drug permeation through the membranes was reversible, reproducible and followed zero order kinetics. Liquid crystal embedded cellulose acetate membranes showed more temperature sensitivity than liquid crystal embedded cellulose nitrate membranes, apparently due to higher LC loading in their porous matrix compared to CN membranes. The pattern of on-off permeation through LC embedded membranes was more distinguished for methimazole compared to that of paracetamol, seemingly due to its lower molecular weight.

Platelet adsorption and hemolytic properties of liquid crystal/composite polymers

The aim of this study is to investigate how the presence of liquid crystal, cholesteryl oleyl carbonate, embedded into polymers (PMMA, Eb270, PU) affects the biocompatibility of composite membranes with human blood. The effects of different surface textures of composite membranes on platelet adhesion and platelet activation were evaluated as well. The adhesion and geometric deformation of platelets were demonstrated by SEM. The quantitative assay of platelet activation was determined by measuring the production of P-Selectin, and by measurement of the blood clotting index when PRP blood was incubated with pure polymer films and composite membranes. Moreover, the hemolysis studies on the damage to red blood cells were performed to gain information on the hemocompatibility of these biomaterials. The results showed that inclusion of cholesteryl oleyl carbonate (COC) embedded in composite membranes, improves their biocompatibility with respect to a substantial reduction of platelet adhesion and the controlled decrease of platelet activation. As the COC content of composite membranes was increased, the value of the blood clotting index increased and the production of P-Selectin decreased. The results also showed that the presence of COC resulted in a decrease of hemolysis ratios. Comparing among three different composite membranes, the best biocompatibility is achieved when PU/COC> or ==Eb270/COC>PMMA/COC. The in vitro studies performed in this work suggest that it may be reasonable to use liquid crystal COC as a mean of surface modification to improve the blood compatibility of biopolymers.

Thermoresponsive drug delivery using liquid crystal-embedded cellulose nitrate membranes

The aim of this study was to investigate the use of thermotropic liquid crystalline (TLC) blends of 4-pentyl-4'-cyanobiphenyl (K15) and 4-heptyl-4'-cyanobiphenyl (K21) with appropriate nematic to isotropic phase temperature (Tn - i) just above body temperature as a temperature-modulated drug permeation system. Using differential scanning calorimetry (DSC) we showed that the phase transition temperature (Tn - i) of K15 and K21 were 34.2 degrees C and 41.5 degrees C respectively. However, the thermogram of K15 and K21 blends with different ratios was shown to be a single endothermic peak similar to that of pure TLCs. K15 and K21 blends did not behave as a physical blend of two thermotropic liquid crystals with different Tn - i. However, they are rather mixed together in such ways that behave like a single unit TLC. The Tn - i of these TLC mixtures was linearly proportionate to the ratio of K15:K21. Using appropriate ratio of K15:K21 TLC, a mixture with desirable phase transition temperature was obtained. A triple layer of cellulose nitrate membranes containing a 50:50 mixture of K15 and K21 was used for drug permeation studies. This composite membrane showed good pulsatile permeation of drug molecules in response to temperature changes below and above the Tn - i of the K15 and K21 blends in a reproducible and reversible manner. Paracetamol and methimazole were chosen as hydrophobic and hydrophilic drug models, respectively. Methimazole permeability through the TLC membrane was much higher (36.0 x 10(-5) cm/s) at temperatures above the phase transition temperature of liquid crystal blends than that (7.2 x 10(-5) cm/s) at temperatures below the phase transition temperature of liquid crystal blends (38.1 degrees C).