Relative weights of the human carpal bones: biological and functional interests

The morphologic and morphometric features of the triquetrum

Fractures of the triquetrum are the second most common form of isolated carpal bone fracture after the scaphoid. However, data on triquetrum morphology and morphometry are sparse. The aim of this study was to describe the morphology of triquetrum using anatomical landmarks, evaluate its morphometric features, and determine its vascular entry points. The morphological and morphometrical features of 87 adult dry triquetral bones (39 left, 48 right) were determined by measuring length, width and thickness. The number and locations of nutrient foramina wider than 0.5 mm were recorded. Mean length, width and thickness were 17.37 mm (range, 14.26-22.13), 12.65 mm (range, 10.37-15.85) and 11.41 mm (range, 8.98-18.23), respectively. The facet articulating with the pisiform was oval in 40 bones, round in 8 and amorphous (neither round nor oval) in 39. The mean length of the interarticular ridge was 7.09 ± 0.9 mm. The mean number of nutrient foramina was significantly greater on the dorsal than on the other aspects. The dorsal predominance of nutrient foramina makes the bone weaker in the dorsal region, which could explain why fractures are more common in this region. Also, the dorsal aspect is rich in blood supply, which could explain why avascular necrosis is less common in triquetral fractures. As most of the vascularization is on the dorsal side, there is need for caution when performing triquetrum surgery. LEVEL OF EVIDENCE: Level 2.

The Use of Nitinol Compression Staple Fixation and Bone Graft for Scaphoid Waist Fractures and Nonunion: A Surgical Technique

In the management of scaphoid fractures, nonunion is an important complication that can lead to carpal instability and early-onset arthritis. Various techniques have been described to treat scaphoid nonunions, yet a clear consensus on the superiority of one method is not yet established. The use of compression staple fixation has been described in the literature and may be a viable alternative to other fixation techniques. Volar Nitinol staple fixation avoids damage to the trapezium during retrograde fixation with a screw. It also avoids damage to the proximal dorsal cartilage, which occurs during anterograde screw fixation. Because of its shape and position on the volar aspect of the scaphoid, staple fixation provides compression, prevents graft extrusion, and avoids taking up space in the medullary canal of the scaphoid. Moreover, it may be technically easier than screw fixation. Despite these advantages, this technique has not been widely adopted. We describe the technique for utilizing Nitinol compression staples and bone grafting in the treatment of scaphoid nonunion.

The Biomechanical Basis of the Claw Finger Deformity: A Computational Simulation Study

PURPOSE

Claw finger deformity occurs during attempted finger extension in patients whose intrinsic finger muscles are weakened or paralyzed by neural impairments. The deformity is generally not acutely present after intrinsic muscle palsy. The delayed onset, with severity progressing over time, suggests soft tissue changes that affect the passive biomechanics of the hand exacerbate and advance the deformity. Clinical interventions may be more effective if such secondary biomechanical changes are effectively addressed. Using a computational model, we simulated these altered soft tissue biomechanical properties to quantify their effects on coordinated finger extension.

METHODS

To evaluate the effects of maladaptive changes in soft tissue biomechanical properties on the development and progression of the claw finger deformity after intrinsic muscle palsy, we completed 45 biomechanical simulations of cyclic index finger flexion and extension, varying the muscle excitation level, clinically relevant biomechanical factors, and wrist position. We evaluated to what extent (1) increased joint laxity, (2) decreased mechanical advantage of the extensors about the proximal interphalangeal joint, and (3) shortening of the flexor muscles contributed to the development of claw finger deformity in an intrinsic-minus hand model.

RESULTS

Of the mechanisms studied, shortening (or contracture) of the extrinsic finger flexors was the factor most associated with the development of claw finger deformity in simulation.

CONCLUSIONS

These simulations suggest that adaptive shortening of the extrinsic finger flexors is required for the development of claw finger deformity. Increased joint laxity and decreased extensor mechanical advantage only contributed to the severity of the deformity in simulations when shortening of the flexor muscles was present.

CLINICAL RELEVANCE

In both the acute and chronic stages of intrinsic finger paralysis, maintaining extrinsic finger flexor length should be an area of focus in rehabilitation to prevent formation of the claw finger deformity and achieve optimal outcomes after surgical interventions.

[Anatomy and biomechanics of the scaphoid]

The scaphoid is biomechanically and clinically of great importance for function of the wrist. In the literature, its anatomy and biomechanics are clearly underrepresented as well as underestimated. In the following review the scaphoid will be presented in more detail, according to recent information and findings. Not only will the origin of the name and the history of previous names, such as cotyloid or navicular, be introduced, but also for the first time in medical literature the significant phylogeny and ontogeny of the scaphoid will be shown. Moreover, the clinically very important blood supply, the ligaments of the scaphoid and relevant biomechanical details will be described.

Incorporating the length-dependent passive-force generating muscle properties of the extrinsic finger muscles into a wrist and finger biomechanical musculoskeletal model

Dynamic movement trajectories of low mass systems have been shown to be predominantly influenced by passive viscoelastic joint forces and torques compared to momentum and inertia. The hand is comprised of 27smallmass segments. Because of the influence of the extrinsic finger muscles, the passive torques about each finger joint become a complex function dependent on the posture of multiple joints of the distal upper limb. However, biomechanical models implemented for the dynamic simulation of hand movements generally don't extend proximally to include the wrist and distal upper limb. Thus, they cannot accurately represent these complex passive torques. The purpose of this short communication is to both describe a method to incorporate the length-dependent passive properties of the extrinsic index finger muscles into a biomechanical model of the upper limb and to demonstrate their influence on combined movement of the wrist and fingers. Leveraging a unique set of experimental data, that describes the net passive torque contributed by the extrinsic finger muscles about the metacarpophalangeal joint of the index finger as a function of both metacarpophalangeal and wrist postures, we simulated the length-dependent passive properties of the extrinsic finger muscles. Dynamic forward simulations demonstrate that a model including these properties passively exhibits coordinated movement between the wrist and finger joints, mimicking tenodesis, a behavior that is absent when the length-dependent properties are removed. This work emphasizes the importance of incorporating the length-dependent properties of the extrinsic finger muscles into biomechanical models to study healthy and impaired hand movements.

Modélisation du carpe osseux et biomécanique

Carpal morphology and orientation of carpal bones are usually studied on two-plane radiography. Those measurements depend on the incidence of X-ray and on the expertise of physician. A method that eliminates both should improve the accuracy of those measurements. The digital data from computed tomography scans can be use to describe carpal geometry. We defined biometric and angular parameters allowing the study of carpal morphology and bones orientation. From digital data from computed tomography scans software can obtain bone volume, inertia principal axis and volume of ellipsoid of inertia. Bone centroid location and principal axis orientation can be used to study bones orientation. 3D distances ratio between geometry centroid of carpal bones. The measurements allowed by this methodology are numerous. A study of a more consistent series of normal wrists will allow in the future for each quantitative parameter to define the normal range. A comparative study of normal wrists and pathology wrists should allow defining, for each pathology, the most judicious quantitative parameters.

Anthropometric characteristics of wrists joint surfaces depending on lunate types

It is well known that the lunate presents with two main types: lunate type I has one facet of its distal surface only for capitates, whereas lunate type II has two facets of the same surface for capitate and for hamate. Our previous anthropometric studies showed that the lunate type II wrists are of greater size than the lunate type I wrists. The aim of the present study was to determine whether the lunate types and the presence or absence of hamato-lunate joint correlate with anthropometric characteristics of the joint surfaces of other wrists. Sixteen sets of macerated wrists with the lunate type I and 21 with the lunate type II were studied. Two-thousand-four-hundred-and-forty-eight anthropometric measurements were done (for 68 anthropometric indicators) and 864 anthropometric indices were calculated (for 24 anthropometric indices) separately for the wrist joint surfaces. The absolute value of the anthropometric indicators of the joint surfaces of the separated wrists were greater in the wrists with the lunate type II, except for the indicators "Greatest length of the dorsal joint surface of pisiform", "Width of the proximal joint surface, measured in the middle" and "Greatest width of the proximal joint surface" for the trapezoid and "Greatest height of the ulnar joint surface" for the capitate. The enlargement of the joint surfaces for the scaphoid was mainly in proximo-distal direction. The enlargement for the triquetrum and pisiform was mainly in radio-ulnar direction. The enlargement for trapezium, trapezoid and capitate was mainly in dorso-volar direction (except for the ulnar joint surface of capitate). The enlargement for hamate was mainly in radio-ulnar and dorso-volar directions (except for the joint surfaces for capitate and triquetrum). The calculated indices illustrate the quantitative proportions of the variations mentioned above. The anthropometric differences are a good reason to make a clear distinction between both types of wrist joint complexes-with or without a hamato-lunate joint.

Skeletal segments of the human pollical and hallucal rays: comparison and analysis of their intrinsic proportions

Since in humans, the first digital ray has a different functional significance in the hand and in the foot, the comparison of the pollical and hallucal rays seems interesting in order to evaluate the influence of specific evolutionary functional factors and biomechanical constraints. The objective of this study was to provide original and detailed data on the intrinsic proportions of the three segments of the human pollical and hallucal rays (metacarpal or metatarsal bone, proximal phalanx, and distal phalanx) in order to allow a quantitative comparison of their relative development. No similar data evaluated from three-dimensional approaches (volumetric or ponderal) seem to be available in the literature. The material consisted of 77 skeletons of the pollical ray and 77 skeletons of the hallucal ray of normal adult individuals. The ponderal approach was used. The first metapodial represented a mean of 57.17% for the pollical ray and 68.48% for the hallucal ray, whereas the phalanges respectively represented 42.83% and 31.52%. The intrinsic phalangeal proportions were almost identical for the pollex and for the hallux (respectively, 71.76% and 72.88% for the proximal phalanx; and 28.24% and 27.12% for the distal phalanx). Since these intrinsic proportions are the reflection of biological, functional and evolutionary constraints, these data seem of interest for the analysis of the functional significance of these rays, for the characterization of malformative syndromes in clinical practice, for reference in comparative morphology, and for the interpretation of hominid fossil bones.