Amperometric hydrogen peroxide biosensor with sol-gel/chitosan network-like film as immobilization matrix

Paper-Based Enzyme Biosensor for One-Step Detection of Hypoxanthine in Fresh and Degraded Fish

Food freshness monitoring, which can reflect the quality of the product at the time of use, remains a great challenge for consumers and the food industry. Herein, we report the development of a cost-effective enzyme-based paper biosensor, which can monitor fish freshness and predict spoilage. The biosensor measures the release of hypoxanthine (HX), an indicator of meat and fish degradation, using the enzymatic conversion of HX by xanthine oxidase (XOD). We demonstrate that the entrapment of XOD and an organic dye, nitro blue tetrazolium chloride (NBT), within a sol-gel biohybrid enables their stabilization on paper and promotes the enzymatic reaction with further retention of the reaction products within the cellulosic network . Linearity in the micromolar concentration range with a detection limit of 3.7 μM for HX is obtained. The biosensor has high selectivity toward HX and is manufactured in few steps from inexpensive widely available materials. The applicability of the biosensor is demonstrated by following fish degradation over time and measuring HX concentrations ranging from 117 (±9) to 198 (±5) μM within 24 h of degradation, at levels that are comparable with those measured by a commercial enzymatic kit for HX detection. As compared to the commercial kit, our biosensors are more cost-effective, do not require addition of exogenous reagents and are portable, having all of the reagents needed for analysis embedded within the sensing platform. This proof-of-concept work demonstrates that the paper-based HX biosensor has potential as a robust reagentless device for real-time monitoring of food freshness and for other applications in which HX plays an important role.

Ionic Liquid-Polypyrrole-Gold Composites as Enhanced Enzyme Immobilization Platforms for Hydrogen Peroxide Sensing

In this work, three different aqueous solutions containing imidazole-based ILs with different alkyl chain lengths ([Cnmim]Br, n = 2, 6, 12) were adopted as the medium for the synthesis of ionic liquid-polypyrrole (IL-PPy) composites. Herein, the ILs undertook the roles of the pyrrole solvent, the media for emulsion polymerization of PPy and PPy dopants, respectively. The electrochemical performances of the three IL-PPy composites on a glassy carbon electrode (GCE) were investigated by electrochemical experiments, which indicated that [C12mim]Br-PPy (C12-PPy) composites displayed better electrochemical performance due to their larger surface area and firmer immobilization on the GCE. Further, C12-PPy/GCE were decorated with Au microparticles by electrodeposition that can not only increase the conductivity, but also immobilize sufficient biomolecules on the electrode. Then, the obtained C12-PPy-Au/GCE with outstanding electrochemical performance was employed as a horseradish peroxidase (HRP) immobilization platform to fabricate a novel C12-PPy-Au-HRP/GCE biosensor for H₂O₂ detection. The results showed that the prepared C12-PPy-Au-HRP/GCE biosensor exhibited high sensitivity, fast response, and a wide detection range as well as low detection limit towards H₂O₂. This work not only provides an outstanding biomolecule immobilization matrix for the fabrication of highly sensitive biosensors, but also advances the understanding of the roles of ILs in improving the electrochemical performance of biosensors.

Sustainable Generation of Ni(OH)2 Nanoparticles for the Green Synthesis of 5-Substituted 1H-Tetrazoles: A Competent Turn on Fluorescence Sensing of H2O2

A mutually correlated green protocol has been devised that originates from a sustainable production of β-Ni(OH)₂ nanoparticles which is used for an efficient catalytic synthesis of versatile substituted tetrazoles, under mild reaction conditions in water via a simple, one-pot, eco-friendly method. The synthesis is followed by derivatization into a highly fluorescence active compound 9-(4-(5-(quinolin-2-yl)-1H-tetrazol-1-yl)phenyl)-9H-carbazole that can be used at tracer concentrations (0.1 μM) to detect as well as quantify hydrogen peroxide down to 2 μM concentration. The nanocatalyst was synthesized by a simple, proficient, and cost-effective methodology and characterized thoroughly by UV-vis absorption and Fourier transform infrared spectra, N₂ adsorption/desorption, high resolution transmission electron microscopy, powder X-ray diffraction pattern, field emission scanning electron microscopy, and thermogravimetric analysis. Broad substrate scope, easy handling, higher efficiency, low cost, and reusability of the catalyst are some of the important features of this heterogeneous catalytic system. The strong analytical performance of the resultant derivative in low-level quantification of potentially hazardous hydrogen peroxide is the key success of the overall green synthesis procedure reported here.

Dual range lactate oxidase-based screen printed amperometric biosensor for analysis of lactate in diversified samples

Lactate concentration is studied as an indicator of physical performance in sports activities, and is also analyzed in health care applications, as well as in the food and cosmetic industries. This organic acid is routinely determined in different concentration ranges, depending on the type of samples for analysis. This paper describes the development of a screen-printed lactate oxidase (LO_x) based biosensor to determine lactate in broad concentration range. The Cu-MOF (copper metallic framework) crosslinking of 0.25U LO_x in a chitosan layer, allows to determine the enzymatic product generated on a platinum modified working electrode, at 0.15 V (vs SPE Ag/AgCl). The biosensor responds linearly in two different concentration ranges: a first catalysis range of 14.65 µA mM^-1, from 0.75 µM to 1 mM, followed by a saturation zone from 1 to 4 mM, after which a substrate enzymatic inhibition of 0.207 µA mM^-1, is observed up to 50 mM. These two ranges of analysis would allow the biosensor to be used for the determination of lactate in different types of samples, with low and high content of lactate. The method reproducibility was kept below 7% and a limit of detection of 0.75 µM was obtained. The device was successfully used in the determination of lactate in sweat and saliva, as a low cost noninvasive analysis, and also in wine samples.

A review on amperometric-type immunosensors based on screen-printed electrodes

In this brief review, we summarize the recent research activities involved in the development of amperometric-type immunosensors based on screen-printed electrodes (SPEs). We focus on the underlying principle involved in these types of sensors, their fabrication and electrode surface modification. We also discuss the various factors involved in the designing of such immunosensors and how they affect their performances. Finally we provide an insight into the drawbacks associated with these SPEs.

Silica-based matrices: State of the art and new perspectives for therapeutic drug delivery

Colloidal carriers based on silica (Si) matrices are an innovative approach within the context of therapeutic drug delivery systems. These carriers are emerging as a great promise for diagnosis and treatment of a wide range of injuries, particularly in cancer and infectious diseases. In addition, bioencapsulation for biosensing and cell therapy in silica sol-gel allows the survival of enzymes and cells for a long period of time. Owing to their porosity, large surface area, and high capability of functionalization, silica nanoparticles (SiNP) have been considered as an attractive option for several bioanalysis applications, such as selective bioseparation, imaging, and drug and gene delivery. However, although great advances are achieved in the biomedical fields, some toxicity effects can be associated with the use of SiNP. This article aims to present a comprehensive review of recent technological advances for silica matrices in biomedical applications, as well as the potential impact of silica-based materials on human health and environment.

Development of an amperometric-based glucose biosensor to measure the glucose content of fruit

An amperometric enzyme-electrode was introduced where glucose oxidase (GOD) was immobilized on chitosan membrane via crosslinking, and then fastened on a platinum working electrode. The immobilized enzyme showed relatively high retention activity. The activity of the immobilized enzyme was influenced by its loading, being suppressed when more than 0.6 mg enzyme was used in the immobilization. The biosensor showing the highest response to glucose utilized 0.21 ml/cm² thick chitosan membrane. The optimum experimental conditions for the biosensors in analysing glucose dissolved in 0.1 M phosphate buffer (pH 6.0) were found to be 35°C and 0.6 V applied potential. The introduced biosensor reached a steady-state current at 60 s. The apparent Michaelis-Menten constant (KMapp) of the biosensor was 14.2350 mM, and its detection limit was 0.05 mM at s/n > 3, determined experimentally. The RSD of repeatability and reproducibility of the biosensor were 2.30% and 3.70%, respectively. The biosensor was showed good stability; it retained ~36% of initial activity after two months of investigation. The performance of the biosensors was evaluated by determining the glucose content in fruit homogenates. Their accuracy was compared to that of a commercial glucose assay kit. There was no significance different between two methods, indicating the introduced biosensor is reliable.

Chemically glycosylation improves the stability of an amperometric horseradish peroxidase biosensor

We constructed a biosensor by electrodeposition of gold nano-particles (AuNPs) on glassy carbon (GC) and subsequent formation of a 4-mercaptobenzoic acid self-assembled monolayer (SAM). The enzyme horseradish peroxidase (HRP) was then covalently immobilized onto the SAM. Two forms of HRP were employed: non-modified and chemically glycosylated with lactose. Circular dichroism (CD) spectra showed that chemical glycosylation did neither change the tertiary structure of HRP nor the heme environment. The highest sensitivity of the biosensor to hydroquinone was obtained for the biosensor with HRP-lactose (414 nA μM(-1)) compared to 378 nA μM(-1) for the one employing non-modified HRP. The chemically glycosylated form of the enzyme catalyzed the reduction of hydroquinone more rapidly than the native form of the enzyme. The sensor employing lactose-modified HRP also had a lower limit of detection (74 μM) than the HRP biosensor (83 μM). However, most importantly, chemically glycosylation improved the long-term stability of the biosensor, which retained 60% of its activity over a four-month storage period compared to only 10% for HRP. These results highlight improvements by an innovative stabilization method when compared to previously reported enzyme-based biosensors.

A sensitive electrochemical immunosensor for the detection of squamous cell carcinoma antigen by using PtAu nanoparticles loaded on TiO2colloidal spheres as labels

A sensitive sandwich-type electrochemical immunosensor for detection of squamous cell carcinoma antigen (SCCA) was developed by using PtAu nanoparticles loaded on TiO₂colloidal spheres (PtAu/TiO₂) as secondary-antibody (Ab₂) labels.

A new conductometric biosensor based on horseradish peroxidase immobilized on chitosan and chitosan/gold nanoparticle films

A new conductometric biosensor was developed and characterized; the biosensor was based on horseradish peroxidase that was deposited in chitosan and chitosan/AuNPs films. The biosensors were characterized by scanning electron microscopy and current-voltage curves. Current-voltage curves in biosensors showed that the electrical conductivity and bistability in biosensors can be modulated by horseradish peroxidase. Horseradish peroxidase catalyzed the reduction of H2 O2 to H2 O with the oxidation of the prosthetic group (Fe3+) in the enzyme to Fe4+=O. Conductometric signal in the biosensors increased with the gradual increase of H2 O2 concentration, and it was due to the H2 O2 reduction. Linear hydrogen peroxide detection was observed for a concentration between 0 and 15 mm. The results proved that these biosensors could have promising industrial applications, due to its rapid and sensitive H2 O2 detection.

Controlling enzymatic activity and kinetics in swollen mesophases by physical nano-confinement

Bicontinuous lipid cubic mesophases are widely investigated as hosting matrices for functional enzymes to build biosensors and bio-devices due to their unique structural characteristics. However, the enzymatic activity within standard mesophases (in-meso) is severely hindered by the relatively small diameter of the mesophase aqueous channels, which provide only limited space for enzymes, and restrict them into a highly confined environment. We show that the enzymatic activity of a model enzyme, horseradish peroxidase (HRP), can be accurately controlled by relaxing its confinement within the cubic phases' water channels, when the aqueous channel diameters are systematically swollen with varying amount of hydration-enhancing sugar ester. The in-meso activity and kinetics of HRP are then systematically investigated by UV-vis spectroscopy, as a function of the size of the aqueous mesophase channels. The enzymatic activity of HRP increases with the swelling of the water channels. In swollen mesophases with water channel diameter larger than the HRP size, the enzymatic activity is more than double that measured in standard mesophases, approaching again the enzymatic activity of free HRP in bulk water. We also show that the physically-entrapped enzymes in the mesophases exhibit a restricted-diffusion-induced initial lag period and report the first observation of in-meso enzymatic kinetics significantly deviating from the normal Michaelis-Menten behaviour observed in free solutions, with deviations vanishing when enzyme confinement is released by swelling the mesophase.

Fabrication of TiN nanostructure as a hydrogen peroxide sensor by oblique angle deposition

Nanostructured titanium nitride (TiN) films with varying porosity were prepared by the oblique angle deposition technique (OAD). The porosity of films increases as the deposition angle becomes larger. The film obtained at an incident angle of 85° exhibits the best catalytic activity and sensitivity to hydrogen peroxide (H2O2). This could be attributed to its largest contact area with the electrolyte. An effective approach is thus proposed to fabricate TiN nanostructure as H2O2 sensor by OAD.

Study on different molecular weights of chitosan as an immobilization matrix for a glucose biosensor

Two chitosan samples (medium molecular weight (MMCHI) and low molecular weight (LMCHI)) were investigated as an enzyme immobilization matrix for the fabrication of a glucose biosensor. Chitosan membranes prepared from acetic acid were flexible, transparent, smooth and quick-drying. The FTIR spectra showed the existence of intermolecular interactions between chitosan and glucose oxidase (GOD). Higher catalytic activities were observed on for GOD-MMCHI than GOD-LMCHI and for those crosslinked with glutaraldehyde than using the adsorption technique. Enzyme loading greater than 0.6 mg decreased the activity. Under optimum conditions (pH 6.0, 35°C and applied potential of 0.6 V) response times of 85 s and 65 s were observed for medium molecular weight chitosan glucose biosensor (GOD-MMCHI/PT) and low molecular weight chitosan glucose biosensor (GOD-LMCHI/PT), respectively. The apparent Michaelis-Menten constant ([Formula: see text]) was found to be 12.737 mM for GOD-MMCHI/PT and 17.692 mM for GOD-LMCHI/PT. This indicated that GOD-MMCHI/PT had greater affinity for the enzyme. Moreover, GOD-MMCHI/PT showed higher sensitivity (52.3666 nA/mM glucose) when compared with GOD-LMCHI/PT (9.8579 nA/mM glucose) at S/N>3. Better repeatability and reproducibility were achieved with GOD-MMCHI/PT than GOD-LMCHI/PT regarding glucose measurement. GOD-MMCHI/PT was found to give the highest enzymatic activity among the electrodes under investigation. The extent of interference encountered by GOD-MMCHI/PT and GOD-LMCHI/PT was not significantly different. Although the Nafion coated biosensor significantly reduced the signal due to the interferents under study, it also significantly reduced the response to glucose. The performance of the biosensors in the determination of glucose in rat serum was evaluated. Comparatively better accuracy and recovery results were obtained for GOD-MMCHI/PT. Hence, GOD-MMCHI/PT showed a better performance when compared with GOD-LMCHI/PT. In conclusion, chitosan membranes shave the potential to be a suitable matrix for the development of glucose biosensors.

Biocompatibility of CS-PPy nanocomposites and their application to glucose biosensor

The intrinsic properties and application potential of nanocolloids are mainly determined by size, shape, composition, and structure. In this case, a novel glucose biosensor was developed by using the chitosan-polypyrrole (CS-PPy) nanocomposites as special modified materials that coating onto the surface of glassy carbon electrode (GCE). The CS-PPy nanocomposites were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. Moreover, the interaction of CS-PPy nanocomposites with glucose oxidase (GOD) was also investigated by the combined studies with Fourier transform infrared spectroscopy (FTIR) and circular dichroism spectroscopy (CD). Due to the conductivity of polypyrrole (PPy), good biocompatibility of CS, and advantages of nanoparticles, CS-PPy nanocomposites were chosen and designed to modify the GCE for the retention of GOD's biological activity and the vantage of electron transfer between GOD and electrodes. The GOD biosensor exhibited a fast amperometric response (5s) to glucose, a good linear current-time relation over a wide range of glucose concentrations from 5.00×10(-4) to 1.47×10(-1)M, and a low detection limit of 1.55×10(-5)M. The GOD biosensor modified with CS-PPy nanocomposites will have essential meaning and practical application in future that attributed to the simple method of fabrication and good performance.

Efficient immobilization of glucose oxidase by in situ photo-cross-linking for glucose biosensing

A glucose biosensor was fabricated based on electrostatic self-assembly in combination with in situ photo-cross-linking of glucose oxidase (GOx) and diazoresin-chitosan (DAR-CS) on Prussian blue deposited multi-walled carbon nanotubes (PB-MWNTs) backbone. It was demonstrated that GOx was initially ionically deposited and subsequently covalently photo-cross-linked onto the PB-MWNTs backbone using photosensitive DAR-CS as the assembly interlayer. The modified electrode exhibited good electrical conductivity and effective electron transfer mediation toward H(2)O(2) reduction due to the employment of PB-MWNTs as the fabrication backbone. The biosensor showed high sensitivity of 77.9 μA mM(-1) cm(-2) to glucose in the linear concentration range from 1.0×10(-5) to 1.1×10(-3) M with fast response time of 10s, detection limit of 3.1×10(-6) M, and good anti-interference ability. More importantly, the biosensor exhibited greatly improved biosensing stability in comparison with the non-photo-cross-linked biosensor attributed to the conversion of weak ionic bonds to strong covalent ones for enzyme immobilization by the proposed strategy. The results for glucose determination in real serum samples with the biosensor were found to be in good agreement with those obtained by the conventional clinical procedure.

Horseradish Peroxidase Immobilization on Amine Functionalized Carbon Nano Tubes: Direct Electrochemistry and Bioelectrocatalysis

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO2-coated multiwalled carbon nanotubes (NH2 TiO2 CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH2- TiO2 - CNT nano-composite. These techniques showed that the NH2 TiO2CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH2-TiO2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (Δ Ep) of 70.6 m V and a formal potential ( E°’) of - 367.65 m V (versus Ag/AgCl) in phosphate buffer solution. The charge transfer coefficient (a) and the apparent charge transfer rate constant (ks) were found to be 0.34 and 2.08 s-1 respectively. The prepared biosensor responded to H2O2 with a linear range, detection limit, sensitivity and response time of 1.0 × 10−9 to 1.0 × 10 −7 M, 0.786nM, 28.4 μA A nM−1 and 3 s, respectively.

Implantable enzyme amperometric biosensors

The implantable enzyme amperometric biosensor continues as the dominant in vivo format for the detection, monitoring and reporting of biochemical analytes related to a wide range of pathologies. Widely used in animal studies, there is increasing emphasis on their use in diabetes care and management, the management of trauma-associated hemorrhage and in critical care monitoring by intensivists in the ICU. These frontier opportunities demand continuous indwelling performance for up to several years, well in excess of the currently approved seven days. This review outlines the many challenges to successful deployment of chronically implantable amperometric enzyme biosensors and emphasizes the emerging technological approaches in their continued development. The foreign body response plays a prominent role in implantable biotransducer failure. Topics considering the approaches to mitigate the inflammatory response, use of biomimetic chemistries, nanostructured topographies, drug eluting constructs, and tissue-to-device interface modulus matching are reviewed. Similarly, factors that influence biotransducer performance such as enzyme stability, substrate interference, mediator selection and calibration are reviewed. For the biosensor system, the opportunities and challenges of integration, guided by footprint requirements, the limitations of mixed signal electronics, and power requirements, has produced three systems approaches. The potential is great. However, integration along the multiple length scales needed to address fundamental issues and integration across the diverse disciplines needed to achieve success of these highly integrated systems, continues to be a challenge in the development and deployment of implantable amperometric enzyme biosensor systems.