1
|
Otake A, Nishida T, Ohmagari S, Einaga Y. Sluggish Electron Transfer of Oxygen-Terminated Moderately Boron-Doped Diamond Electrode Induced by Large Interfacial Capacitance between a Diamond and Silicon Interface. JACS AU 2024; 4:1184-1193. [PMID: 38559713 PMCID: PMC10976611 DOI: 10.1021/jacsau.4c00006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/03/2024] [Revised: 02/10/2024] [Accepted: 02/26/2024] [Indexed: 04/04/2024]
Abstract
Boron-doped diamond (BDD) has tremendous potential for use as an electrode material with outstanding characteristics. The substrate material of BDD can affect the electrochemical properties of BDD electrodes due to the different junction structures of BDD and the substrate materials. However, the BDD/substrate interfacial properties have not been clarified. In this study, the electrochemical behavior of BDD electrodes with different boron-doping levels (0.1% and 1.0% B/C ratios) synthesized on Si, W, Nb, and Mo substrates was investigated. Potential band diagrams of the BDD/substrate interface were proposed to explain different junction structures and electrochemical behaviors. Oxygen-terminated BDD with moderate boron-doping levels exhibited sluggish electron transfer induced by the large capacitance generated at the BDD/Si interface. These findings provide a fundamental understanding of diamond electrochemistry and insight into the selection of suitable substrate materials for practical applications of BDD electrodes.
Collapse
Affiliation(s)
- Atsushi Otake
- Department of Chemistry, Keio University, 3-14-1 Hiyoshi, Yokohama 223-8522, Japan
| | - Taiki Nishida
- Sensing Material Research Team, Sensing System Research Center, National Institute of Advanced Industrial Science and Technology, 807-1 Shukumachi, Tosu, Saga 841-0052, Japan
| | - Shinya Ohmagari
- Sensing Material Research Team, Sensing System Research Center, National Institute of Advanced Industrial Science and Technology, 807-1 Shukumachi, Tosu, Saga 841-0052, Japan
| | - Yasuaki Einaga
- Department of Chemistry, Keio University, 3-14-1 Hiyoshi, Yokohama 223-8522, Japan
| |
Collapse
|
2
|
Silver-manganese nanocomposite modified screen-printed carbon electrode in the fabrication of an electrochemical, disposable biosensor strip for cystic fibrosis. Mikrochim Acta 2022; 189:327. [PMID: 35951246 DOI: 10.1007/s00604-022-05431-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Accepted: 07/25/2022] [Indexed: 10/15/2022]
Abstract
A silver-manganese nanocomposite was successfully prepared by the urea hydrolysis method and used to detect chloride ions in sweat electrochemically. The synthesis involves the reaction of manganese sulphate, silver nitrate, and urea at 100 °C for 24 h. The crystalline nature of the particle was studied by diffraction analysis and found to be mixed-phase oxides of manganese alongside the oxides of silver. Morphological studies revealed the presence of quasi-prism-like structures, which is characteristic of β-MnO2. A disposable sensor was fabricated by screen-printing the catalyst and used for the electrochemical detection of chloride ions in sweat. The sensor exhibited good selectivity, a sensitivity of 22.93 ± 0.64 µA mM-1 cm-2 in solution and 3010 ± 60 µA (log mM) -1 cm-2 for the fabricated sensor strip with a detection range from 5 mM up to 200 mM. The detection limit is 207 ± 7 µM (S/N = 3) in solution and 17 ± 6 µM for the fabricated sensor strip. The relative standard deviation (RSD) of sensor response is 2.38%. A prototype of the biosensor strip was fabricated and validated using real samples. This brings the possibility of developing a real-time biosensor strip for cystic fibrosis in point-of-care testing applications.
Collapse
|
3
|
Mohammed AM, Al-Khateeb IK, Haider AJ, Rahim RA, Hashim U. Preparation of DNA biosensor application from fuel oil waste by functionalization and characterization of MWCNT. SENSING AND BIO-SENSING RESEARCH 2017. [DOI: 10.1016/j.sbsr.2017.09.002] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/18/2022] Open
|
4
|
Effects of diamond-FET-based RNA aptamer sensing for detection of real sample of HIV-1 Tat protein. Biosens Bioelectron 2012; 40:277-82. [PMID: 22975093 DOI: 10.1016/j.bios.2012.07.048] [Citation(s) in RCA: 70] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2012] [Revised: 07/06/2012] [Accepted: 07/23/2012] [Indexed: 11/20/2022]
Abstract
Diamond is a promising material for merging solid-state and biological systems owing to its chemical stability, low background current, wide potential window and biocompatibility. The effects of surface charge density on human immunodeficiency virus type 1 Trans-activator transcription (HIV-1 Tat) protein binding have been investigated on a diamond field-effect transistor (FET) using ribonucleic acid (RNA) aptamers as a sensing element on a solid surface. A change in the gate potential of 91.6 mV was observed, whereby a shift in the negative direction was observed at a source-drain current of -8 μA in the presence of HIV-1 Tat protein bound to the RNA aptamers. Moreover, the reversible change in gate potential caused by the binding and regeneration cycles was very stable throughout cyclical detections. The stable immobilization is achieved via RNA aptamers covalently bonded to the carboxyl-terminated terephtalic acids on amine sites, thereby increasing the sensitivity of the HIV-1 Tat protein sensor. The reliable use of a real sample of HIV-1 Tat protein by an aptamer-FET was demonstrated for the first time, which showed the potential of diamond biointerfaces in clinical biosensor applications.
Collapse
|
5
|
Ruslinda AR, Tajima S, Ishii Y, Ishiyama Y, Edgington R, Kawarada H. Aptamer-based biosensor for sensitive PDGF detection using diamond transistor. Biosens Bioelectron 2010; 26:1599-604. [PMID: 20800468 DOI: 10.1016/j.bios.2010.08.002] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2010] [Revised: 07/30/2010] [Accepted: 08/02/2010] [Indexed: 10/19/2022]
Abstract
The detection of platelet-derived growth factor (PDGF) via a solution-gate field-effect transistor (SGFET) has been demonstrated for the first time using aptamers immobilized on a diamond surface. Upon introduction of PDGF to the immobilized aptamer, a shift of 31.7 mV in the negative direction is observed at a source-drain current of -50 μA. A shift of 32.3 mV in the positive direction is detected after regeneration by SDS solution, indicating that the static measurement returns to its original value. These SGFETs operate stably within the large potential window of diamond (>3.0 V), and hence the surface channel does not need passivating with a thick insulating layer. Thereof, the immobilized aptamer channels have been exposed directly to the electrolyte solution without a gate insulator. Immobilization is achieved via aptamers covalently bonding to amine sites, thereby increasing the sensitivity of the biosensors. Diamond SGFETs have potential for the detection of PDGF and show durability against biological degradation after repeated usage and regeneration.
Collapse
Affiliation(s)
- A Rahim Ruslinda
- School of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan.
| | | | | | | | | | | |
Collapse
|
6
|
Poghossian A, Abouzar M, Razavi A, Bäcker M, Bijnens N, Williams O, Haenen K, Moritz W, Wagner P, Schöning M. Nanocrystalline-diamond thin films with high pH and penicillin sensitivity prepared on a capacitive Si–SiO2 structure. Electrochim Acta 2009. [DOI: 10.1016/j.electacta.2009.03.011] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
7
|
Abouzar M, Poghossian A, Razavi A, Williams O, Bijnens N, Wagner P, Schöning M. Characterisation of capacitive field-effect sensors with a nanocrystalline-diamond film as transducer material for multi-parameter sensing. Biosens Bioelectron 2009; 24:1298-304. [DOI: 10.1016/j.bios.2008.07.056] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2008] [Revised: 07/07/2008] [Accepted: 07/22/2008] [Indexed: 11/28/2022]
|
8
|
Gonzalo-Ruiz J, Mas R, de Haro C, Cabruja E, Camero R, Alonso-Lomillo MA, Muñoz FJ. Early determination of cystic fibrosis by electrochemical chloride quantification in sweat. Biosens Bioelectron 2008; 24:1788-91. [PMID: 18823769 DOI: 10.1016/j.bios.2008.07.051] [Citation(s) in RCA: 77] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/14/2008] [Revised: 07/22/2008] [Accepted: 07/22/2008] [Indexed: 01/15/2023]
Abstract
A novel and rapid approach to quantify chloride concentration in sweat for early detection of cystic fibrosis (CF) is shown in this work. Disposable screen-printed sensor (SPS) devices capable to induce sweat and measure the chloride concentration are presented. Pilocarpine, which was forced into de skin by means of iontophoresis, has been used to stimulate the sweat glands. Chloride concentration has been directly measured on the skin by potentiometry. The performance of the devices has been tested in synthetic samples, obtaining good agreement with the Nernst equation. Sensors reproducibility has been analyzed in terms of residual standard deviation (RSD), obtaining a value of 8% (n=6 and alpha=0.05). Finally, the application of these sensors in several volunteers has been carried out. The results were compared with the method generally used in hospitals, obtaining deviations minor than 8%.
Collapse
Affiliation(s)
- Javier Gonzalo-Ruiz
- Centro Nacional de Microelectrónica (IMB-CNM), CSIC, Esfera UAB, Campus Universidad Autónoma de Barcelona, Bellaterra, Barcelona, Spain.
| | | | | | | | | | | | | |
Collapse
|
9
|
Chaniotakis N, Sofikiti N. Novel semiconductor materials for the development of chemical sensors and biosensors: A review. Anal Chim Acta 2008; 615:1-9. [DOI: 10.1016/j.aca.2008.03.046] [Citation(s) in RCA: 69] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2007] [Revised: 03/13/2008] [Accepted: 03/18/2008] [Indexed: 10/22/2022]
|
10
|
Song KS, Zhang GJ, Nakamura Y, Furukawa K, Hiraki T, Yang JH, Funatsu T, Ohdomari I, Kawarada H. Label-free DNA sensors using ultrasensitive diamond field-effect transistors in solution. PHYSICAL REVIEW. E, STATISTICAL, NONLINEAR, AND SOFT MATTER PHYSICS 2006; 74:041919. [PMID: 17155108 DOI: 10.1103/physreve.74.041919] [Citation(s) in RCA: 28] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2006] [Revised: 08/15/2006] [Indexed: 05/07/2023]
Abstract
Charge detection biosensors have recently become the focal point of biosensor research, especially field-effect-transistors (FETs) that combine compactness, low cost, high input, and low output impedances, to realize simple and stable in vivo diagnostic systems. However, critical evaluation of the possibility and limitations of charge detection of label-free DNA hybridization using silicon-based ion-sensitive FETs (ISFETs) has been introduced recently. The channel surface of these devices must be covered by relatively thick insulating layers ( SiO2, Si3N4, Al2O3, or Ta2O5) to protect against the invasion of ions from solution. These thick insulating layers are not suitable for charge detection of DNA and miniaturization, as the small capacitance of thick insulating layers restricts translation of the negative DNA charge from the electrolyte to the channel surface. To overcome these difficulties, thin-gate-insulator FET sensors should be developed. Here, we report diamond solution-gate FETs (SGFETs), where the DNA-immobilized channels are exposed directly to the electrolyte solution without gate insulator. These SGFETs operate stably within the large potential window of diamond (>3.0 V). Thus, the channel surface does not need to be covered by thick insulating layers, and DNA is immobilized directly through amine sites, which is a factor of 30 more sensitive than existing Si-ISFET DNA sensors. Diamond SGFETs can rapidly detect complementary, 3-mer mismatched (10 pM) and has a potential for the detection of single-base mismatched oligonucleotide DNA, without biological degradation by cyclically repeated hybridization and denature.
Collapse
Affiliation(s)
- Kwang-Soup Song
- Department of Electronical Engineering and Bioscience, School of Science and Engineering, Waseda University, 3-4-1 Okubo, Tokyo 169-8555, Japan.
| | | | | | | | | | | | | | | | | |
Collapse
|
11
|
Song KS, Nakamura Y, Sasaki Y, Degawa M, Yang JH, Kawarada H. pH-sensitive diamond field-effect transistors (FETs) with directly aminated channel surface. Anal Chim Acta 2006; 573-574:3-8. [PMID: 17723497 DOI: 10.1016/j.aca.2006.04.051] [Citation(s) in RCA: 36] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2005] [Revised: 04/13/2006] [Accepted: 04/20/2006] [Indexed: 11/30/2022]
Abstract
We have introduced pH sensors fabricated on diamond thin films through modification of the surface-terminated atom. We directly modified the diamond surface from hydrogen to amine or oxygen with ultraviolet (UV) irradiation under ammonia gas. The quantified amine site based on the spectra obtained by X-ray photoelectron spectroscopy (XPS) is 26% (2.6 x 10(14) cm(-2)) with UV irradiation for 8h and its coverage is dependent on the UV irradiation time. This directly aminated diamond surface is stable with long-term exposure in air and electrolyte solution. We fabricated diamond solution-gate field-effect transistors (SGFETs) without insulating layers on the channel surface. These diamond SGFETs with amine modified by direct amination are sensitive to pH (45 mV/pH) over a wide range from pH 2 to 12 and their sensitivity is dependent on the density of binding sites corresponding to UV irradiation time on the channel surface.
Collapse
Affiliation(s)
- Kwang-Soup Song
- School of Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan.
| | | | | | | | | | | |
Collapse
|
12
|
Zhang GJ, Song KS, Nakamura Y, Ueno T, Funatsu T, Ohdomari I, Kawarada H. DNA micropatterning on polycrystalline diamond via one-step direct amination. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2006; 22:3728-34. [PMID: 16584249 DOI: 10.1021/la050883d] [Citation(s) in RCA: 31] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/08/2023]
Abstract
We report a novel method of one-step direct amination on polycrystalline diamond to produce functionalized surfaces for DNA micropatterning by photolithography. Polycrystalline diamond was exposed to UV irradiation in ammonia gas to generate amine groups directly. After patterning, optical microscopy confirmed that micropatterns covered with an Au mask were regular in size and shape. The regions outside the micropatterns were passivated with fluorine termination by C3F8 plasma, and the chemical changes on the two different surfaces--the amine groups inside the patterned regions by one-step direct amination and fluorine termination outside the patterned regions--were characterized by spatially resolved X-ray photoelectron spectroscopy (XPS). The patterned areas terminated with active amine groups were then immobilized with probe DNA via a bifunctional molecule. The sequence specificity was conducted by hybridizing fluorescently labeled target DNA to both complementary and noncomplementary probe DNA attached inside the micropatterns. The fluorescence micropatterns observed by epifluorescence microscopy corresponded to those imaged by optical microscopy. DNA hybridization and denaturation experiments on a DNA-modified diamond show that the diamond surfaces reveal superior stability. The influence of a different amination time on fluorescence intensity was compared. Different terminations as passivated layers were investigated, and as a result, fluorine termination points to the greatest signal-to-noise ratio.
Collapse
Affiliation(s)
- Guo-Jun Zhang
- Nanotechnology Research Center & Institute of Biomedical Engineering, Waseda University, Waseda Tsurumaki-cho 513, Shinjuku-ku, Tokyo 162-0041, Japan.
| | | | | | | | | | | | | |
Collapse
|
13
|
Grichko VP, Shenderova OA. Nanodiamond. ULTRANANOCRYSTALLINE DIAMOND 2006. [PMCID: PMC7155738 DOI: 10.1016/b978-081551524-1.50017-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Subscribe] [Scholar Register] [Indexed: 03/12/2023]
Abstract
This chapter discusses various methods of surface modification for the development of functionalized diamond nanoparticles for biomedical applications. To be used in biomedical applications, nanoparticles must be biocompatible, non-toxic, non-detective by immune systems, and should not induce side effects. Size control of particles is a prerequisite for biomedical applications. Carbon nanostructures span the same length scale as bio-compounds, ranging from subnanometer-size nucleotides to tens and hundreds of nanometer-sized organelles and viruses, and up to micron-sized cell sizes. The chapter also summarizes different approaches to the surface functionalization of nanodiamonds (ND) particles—that is, the key in successful biomedical applications followed by a discussion of modification of diamond surfaces with nucleic acids and proteins. Both current and potential applications of diamond films and particles in the area of biosensing are addressed.
Collapse
|