Detection of digitalis compounds using a surface plasmon resonance-based biosensor

Na⁺,K⁺-ATPase as the Target Enzyme for Organic and Inorganic Compounds

This paper gives an overview of the literature data concerning specific and non specific inhibitors of Na⁺,K⁺-ATPase receptor. The immobilization approaches developed to improve the rather low time and temperature stability of Na⁺,K⁺-ATPase, as well to preserve the enzyme properties were overviewed. The functional immobilization of Na⁺,K⁺-ATPase receptor as the target, with preservation of the full functional protein activity and access of various substances to an optimum number of binding sites under controlled conditions in the combination with high sensitive technology for the detection of enzyme activity is the basis for application of this enzyme in medical, pharmaceutical and environmental research.

Comparison between the surface plasmon resonance (SPR) and the quartz crystal microbalance (QCM) method in a structural analysis of human endothelin-1

In this study, an automated surface plasmon resonance (SPR)-based biosensor was compared with a quartz crystal microbalance (QCM) biosensor. The two biosensor systems were used for characterizing a site-directed monoclonal antibody (mAb), raised against the C-terminal heptapeptide ET-1(15-21) of the human endothelin (ET-1). The mAb was characterized by its capacity for binding to ET-1, ET-3, Big.ET-1(22-38), the C-terminal (ET-1(15-21), ET-1(16-21), ET-1(17-21)), and six derivates of ET-1(16-21), each containing a substitution with alanine (Ala) of a single aminoacid from position 16-21, respectively. The mAb reacted well with ET-1 and its fragments ET-1(15-21), ET-1(16-21), ET-1(17-21), but showed only a partial cross-reaction with ET-3, and did not bind human Big.ET-1(22-38). The Ala substitution on position 16,17, or 19 of ET-1(16-21) did not affect the antibody binding capacity of the hexapaptide ET-1(16-21). On the contrary, Ala substitution or Asp(18), Ile(20) and particularly Trp(21), inhibited its immunoreactivity. Thus the C-terminal represents an immunodominant epitope in ET-1 and is important for antibody binding. The SPR and QCM response signals were similar in shape but differing in time scales, reflecting differences in detection mechanisms. With regard to the fundamental problem of comparing different measurement principles, we found a good correlation between results obtained using the BIA technology and the QCM.

Comparison of a conventional immunoassay (ELISA) with a surface plasmon resonance-based biosensor for IGF-1 detection in cows' milk

Recombinant bovine somatotropin (rBST) treatment is adopted in dairy cows to augment milk yield. Previous studies showed that insulin-like growth factor-1 (IGF-1) is present in milk from cows treated with rBST. Since IGF-1 is a suspected carcinogen, its presence in milk for human consumption is potentially a health hazard. Therefore rBST use, still authorized in the United States, has been revoked in Canada and is under evaluation in the EU. The rising attention on IGF-1 presence in alimentary milk focused the necessity to develop specific, sensitive and rapid IGF-1 detection systems. We have developed a solid phase enzyme-linked immunoassay (ELISA) and also an automated surface plasmon resonance-based biosensor system (BIA-technology) for evaluating IGF-1 in fresh cow's milk. Hyperimmune polyclonal anti-IGF-1 antibodies were characterized with respect to their specific binding capacity to IGF-1. The results obtained with these two methods have been compared. This study shows the potential usefulness of the biosensor technology for biomolecular interaction analysis. The features of this technology (fully automated, measures in real time, sharpened yes/no response) offer several advantages compared to ELISA in the detection of compounds in fresh cows' milk (MURST 40%; CNR P.F. MADESS 2).

Detection of porphyrin using a short peptide immobilized on a surface plasmon resonance sensor chip

In this paper the development and feasibility of a novel detection system for a low molecular weight chemical, in which a peptide was utilized as a binding molecule, are described. Surface plasmon resonance (SPR) apparatus was used as a transducer. The porphyrin binding peptide, PSP2, was used as a model peptide ligand, while a porphyrin derivative, H(2)TMpyP, was used as a model low-molecular-weight chemical. PSP2 was covalently immobilized onto the SPR sensor chip and SPR measurement using the PSP2-immobilized chip for various concentrations of porphyrin was carried out. H(2)TMpyP was detectable in the range from 100 ng ml(-1) to 10 microg ml(-1) with a linear correlation and good precision and the PSP2-immobilized chip could be regenerated within 1 min after measurement in this system. From comparison of the detection manners of three porphyrin derivatives, the ability of a short peptide to discriminate between differences in molecular structure was demonstrated. Moreover, the self-assembled monolayer (SAM) of PSP2 was successfully prepared on the gold substrate and H(2)TMpyP could be detected using the PSP2-SAM chip.

Effect of incident angle of light on sensitivity and detection limit for layers of antibody with surface plasmon resonance spectroscopy

The effect of the incident angle of light on sensitivity and the detection limit for surface-plasmon resonance spectroscopy were examined. The sensitivities and the detection limit were experimentally measured using an antibody as a modeled analyte in the incident angles of a light region of 66-76 degrees. The results showed that the sensitivity of a smaller incident angle was higher than that of a larger one. For instance, the sensitivity of a 66 degree incident angle was three times higher than that of a 76 degree incident angle. The detection limit with a 66 degree incident angle was one-tenth of that with a 76 degree incident angle. These sensitivities and detection limits were compared with those of a commercially produced surface-plasmon resonance instrument. This comparison demonstrated that a wavelength resolution of the order of less than 10(-2) nm was necessary to obtain satisfactory sensitivities and detection limits. In addition, the refractive index and thickness of the antibody layer formed on a sensor surface was proposed by experimental results and theoretical calculation.

Survey of the 1998 optical biosensor literature

The utilization of optical biosensors to study molecular interactions continues to expand. In 1998, 384 articles relating to the use of commercial biosensors were published in 130 different journals. While significant strides in new applications and methodology were made, a majority of the biosensor literature is of rather poor quality. Basic information about experimental conditions is often not presented and many publications fail to display the experimental data, bringing into question the credibility of the results. This review provides suggestions on how to collect, analyze and report biosensor data.