Analyzing single protein molecules using optical methods

Roles of cholesterol and lipids in the etiopathogenesis of Alzheimer's disease

Alzheimer's disease is the principal cause of dementia throughout the world and the fourth cause of death in developed economies.This brain disorder is characterized by the formation of brain protein aggregates, namely, the paired helical filaments and senile plaques. Oxidative stress during life, neuroinflamamtion, and alterations in neuron-glia interaction patterns have been also involved in the etiopathogenesis of this disease. In recent years, cumulative evidence has been gained on the involvement of alteration in neuronal lipoproteins activity, as well as on the role of cholesterol and other lipids in the pathogenesis of this neurodegenerative disorder. In this review, we analyze the links between changes in cholesterol homeostasis, and the changes of lipids of major importance for neuronal activity and Alheimer's disease. The investigation on the fine molecular mechanisms underlying the lipids influence in the etiopathogenesis of Alzheimer's disease may shed light into its treatment and medical management.

Intranuclear binding kinetics and mobility of single native U1 snRNP particles in living cells

Uridine-rich small nuclear ribonucleoproteins (U snRNPs) are splicing factors, which are diffusely distributed in the nucleoplasm and also concentrated in nuclear speckles. Fluorescently labeled, native U1 snRNPs were microinjected into the cytoplasm of living HeLa cells. After nuclear import single U1 snRNPs could be visualized and tracked at a spatial precision of 30 nm at a frame rate of 200 Hz employing a custom-built microscope with single-molecule sensitivity. The single-particle tracks revealed that most U1 snRNPs were bound to specific intranuclear sites, many of those presumably representing pre-mRNA splicing sites. The dissociation kinetics from these sites showed a multiexponential decay behavior on time scales ranging from milliseconds to seconds, reflecting the involvement of U1 snRNPs in numerous distinct interactions. The average dwell times for U1 snRNPs bound at sites within the nucleoplasm did not differ significantly from those in speckles, indicating that similar processes occur in both compartments. Mobile U1 snRNPs moved with diffusion constants in the range from 0.5 to 8 microm2/s. These values were consistent with uncomplexed U1 snRNPs diffusing at a viscosity of 5 cPoise and U1 snRNPs moving in a largely restricted manner, and U1 snRNPs contained in large supramolecular assemblies such as spliceosomes or supraspliceosomes.

Determining protease activity in vivo by fluorescence cross-correlation analysis

To date, most biochemical approaches to unravel protein function have focused on purified proteins in vitro. Whereas they analyze enzyme performance under assay conditions, they do not necessarily tell us what is relevant within a living cell. Ideally, cellular functions should be examined in situ. In particular, association/dissociation reactions are ubiquitous, but so far there is no standard technique permitting online analysis of these processes in vivo. Featuring single-molecule sensitivity combined with intrinsic averaging, fluorescence correlation spectroscopy is a minimally invasive technique ideally suited to monitor proteins. Moreover, endogenous fluorescence-based assays can be established by genetically encoding fusions of autofluorescent proteins and cellular proteins, thus avoiding the disadvantages of in vitro protein labeling and subsequent delivery to cells. Here, we present an in vivo protease assay as a model system: Green and red autofluorescent proteins were connected by Caspase-3- sensitive and insensitive protein linkers to create double-labeled protease substrates. Then, dual-color fluorescence cross-correlation spectroscopy was employed to study the protease reaction in situ. Allowing assessment of multiple dynamic parameters simultaneously, this method provided internal calibration and improved experimental resolution for quantifying protein stability. This approach, which is easily extended to reversible protein-protein interactions, seems very promising for elucidating intracellular protein functions.

[Os(bpy)2(CO)(enIA)][OTf]2: A Novel Sulfhydryl−Specific Metal−Ligand Complex

The synthesis and physical-chemical characterization of the metal-ligand complex [Os(bpy)2(CO)(enIA)][OTf]2 (where enIA = ethylenediamine iodoacetamide) with a sulfhydryl-specific functional group is described. The UV and visible absorption and luminescence emission, including lifetime and steady-state anisotropy, are reported for the free probe and the probe covalently linked to two test proteins. The spectroscopic properties of the probe are unaffected by chemical modification and subsequent covalent linkage to the proteins. The luminescence lifetime in aqueous buffer is approximately 200 ns and the limiting anisotropy is greater than 0.125, suggesting a potentially useful probe for biophysical investigations.

The need for metabolic mapping in living cells and tissues

The ultimate activity of an enzyme depends on many regulatory steps from transcription of the gene up to complex formation of the enzyme. Therefore, gene expression (mRNA levels) or protein expression (protein levels) are not reliable parameters to predict the functional activity of an enzyme. Activity measurements in cell homogenates or in frozen or fixed (and thus dead) cell preparations are not appropriate either because post-translational regulation mechanisms that exist in living cells may be lost by homogenization or freezing or chemical fixation of cells. Therefore, metabolic mapping in living cells or, in other words, visualization and quantification using microscopy and image analysis of enzyme reactions in living cells is the approach of choice to understand the functional role of enzymes in vivo as is demonstrated here with a number of examples in recent literature.

Bayesian estimation for species identification in single-molecule fluorescence microscopy

In this article we describe a recursive Bayesian estimator for the identification of diffusing fluorophores using photon arrival-time data from a single spectral channel. We present derivations for all relevant diffusion and fluorescence models, and we use simulated diffusion trajectories and photon streams to evaluate the estimator's performance. We consider simplified estimation schemes that bin the photon counts within time intervals of fixed duration, and show that they can perform well in realistic parameter regimes. The latter results indicate the feasibility of performing identification experiments in real time. It will be straightforward to generalize our approach for use in more complicated scenarios, e.g., with multiple spectral channels or fast photophysical dynamics.

Biofunctionalized, Ultrathin Coatings of Cross-Linked Star-Shaped Poly(ethylene oxide) Allow Reversible Folding of Immobilized Proteins

Dense, ultrathin networks of isocyanate terminated star-shaped poly(ethylene oxide) (PEO) molecules, cross-linked at their chain ends via urea groups, were shown to be extremely resistant to unspecific adsorption of proteins while at the same time suitable for easy biocompatible modification. Application by spin coating offers a simple procedure for the preparation of minimally interacting surfaces that are functionalized by suitable linker groups to immobilize proteins in their native conformations. These coatings form a versatile basis for biofunctional and biomimetic surfaces. We have demonstrated their advantageous properties by using single-molecule fluorescence microscopy to study immobilized proteins under destabilizing conditions. Biotinylated ribonuclease H (RNase H) was labeled with a fluorescence resonance energy transfer (FRET) pair of fluorescent dyes and attached to the surface by a biotin-streptavidin linkage. FRET analysis demonstrated completely reversible denaturation/renaturation behavior upon exposure of the surface-immobilized proteins to 6 M guanidinium chloride (GdmCl) followed by washing in buffer. A comparison with bovine serum albumin (BSA) coated surfaces and linear PEO brush surfaces yielded superior performance in terms of chemical stability, inertness and noninteracting nature of the star-polymer derived films.

Combined single-molecule force and fluorescence measurements for biology

Recent advances in single-molecule techniques allow the application of force to an individual biomolecule whilst simultaneously monitoring its response using fluorescent probes. The effects of applied mechanical load on single-enzyme turnovers, biomolecular interactions and conformational changes can now be studied with nanometer precision and millisecond time resolution.

Ultrasensitive investigations of biological systems by fluorescence correlation spectroscopy

Fluorescence correlation spectroscopy (FCS) extracts information about molecular dynamics from the tiny fluctuations that can be observed in the emission of small ensembles of fluorescent molecules in thermodynamic equilibrium. Employing a confocal setup in conjunction with highly dilute samples, the average number of fluorescent particles simultaneously within the measurement volume (approximately 1 fl) is minimized. Among the multitude of chemical and physical parameters accessible by FCS are local concentrations, mobility coefficients, rate constants for association and dissociation processes, and even enzyme kinetics. As any reaction causing an alteration of the primary measurement parameters such as fluorescence brightness or mobility can be monitored, the application of this noninvasive method to unravel processes in living cells is straightforward. Due to the high spatial resolution of less than 0.5 microm, selective measurements in cellular compartments, e.g., to probe receptor-ligand interactions on cell membranes, are feasible. Moreover, the observation of local molecular dynamics provides access to environmental parameters such as local oxygen concentrations, pH, or viscosity. Thus, this versatile technique is of particular attractiveness for researchers striving for quantitative assessment of interactions and dynamics of small molecular quantities in biologically relevant systems.

New developments in multiphoton microscopy

Multiphoton laser-scanning microscopy is still developing rapidly, both technologically and by broadening its range of application. Technical progress has been made in the optimization of fluorophores, in increasing the imaging depth of multiphoton microscopy, and in microscope miniaturization. These advances further facilitate the study of neuronal structure and signaling in living and even in behaving animals, in particular in combination with the expression of fluorescent proteins. In addition, nonlinear optical contrast mechanisms other than multiphoton excitation of fluorescence are being explored.

A protease assay for two-photon crosscorrelation and FRET analysis based solely on fluorescent proteins

GFP and the red fluorescent protein, DsRed, have been combined to design a protease assay that allows not only for fluorescence resonance energy transfer (FRET) studies but also for dual-color crosscorrelation analysis, a single-molecule-based method that selectively probes the concomitant movement of two distinct tags. The measurement principle is based on a spectrally resolved detection of single molecules diffusing in and out of a diffraction-limited laser focus. Double-labeled substrate molecules are separated into two single-labeled products by specific cleavage at a protease cleavage site between the two flanking tags, DsRed and GFP, thus disrupting joint fluctuations in the two detection channels and terminating FRET between the two labels. In contrast to enzyme assays based solely on FRET, this method of dual-color crosscorrelation is not limited to a certain range of distances between the fluorophores and is much more versatile with respect to possible substrate design. To simplify the measurement setup, two-photon excitation was used, allowing for simultaneous excitation of both tags with a single infrared laser wavelength. The general concept was experimentally verified with a GFP-peptide-DsRed construct containing the cleavage site for tobacco etch virus protease. Two-photon excitation in the infrared and the use of cloneable tags make this assay easily adaptable to intracellular applications. Moreover, the combination of FRET and crosscorrelation analysis in a single-molecule-based approach promises exciting perspectives for miniaturized high-throughput screening based on fluorescence spectroscopy.

Two-photon fluorescence coincidence analysis: rapid measurements of enzyme kinetics

Dual-color fluorescence cross-correlation analysis is a powerful tool for probing interactions of different fluorescently labeled molecules in aqueous solution. The concept is the selective observation of coordinated spontaneous fluctuations in two separate detection channels that unambiguously reflect the existence of physical or chemical linkages among the different fluorescent species. It has previously been shown that the evaluation of cross-correlation amplitudes, i.e., coincidence factors, is sufficient to extract essential information about the kinetics of formation or cleavage of chemical or physical bonds. Confocal fluorescence coincidence analysis (CFCA) (Winkler et al., Proc. Natl. Acad. Sci. U.S.A. 96:1375-1378, 1999) emphasizes short analysis times and simplified data evaluation and is thus particularly useful for screening applications or measurements on live cells where small illumination doses need to be applied. The recent use of two-photon fluorescence excitation has simplified dual- or multicolor measurements by enabling the simultaneous excitation of largely different dye molecules by a single infra-red laser line (Heinze et al., Proc. Natl. Acad. Sci. U.S.A. 97:10377-10382, 2000). It is demonstrated here that a combination of CFCA with two-photon excitation allows for minimization of analysis times for multicomponent systems down to some hundreds of milliseconds, while preserving all known advantages of two-photon excitation. By introducing crucial measurement parameters, experimental limits for the reduction of sampling times are discussed for the special case of distinguishing positive from negative samples in an endonucleolytic cleavage assay.

Fluorescence correlation spectroscopy for the detection and study of single molecules in biology

The recent development of single molecule detection techniques has opened new horizons for the study of individual macromolecules under physiological conditions. Conformational subpopulations, internal dynamics and activity of single biomolecules, parameters that have so far been hidden in large ensemble averages, are now being unveiled. Herein, we review a particular attractive solution-based single molecule technique, fluorescence correlation spectroscopy (FCS). This time-averaging fluctuation analysis which is usually performed in Confocal setups combines maximum sensitivity with high statistical confidence. FCS has proven to be a very versatile and powerful tool for detection and temporal investigation of biomolecules at ultralow concentrations on surfaces, in solution, and in living cells. The introduction of dual-color cross-correlation and two-photon excitation in FCS experiments is currently increasing the number of promising applications of FCS to biological research.