Advances in immunoassay technology

A Proof-of-Concept Sandwich Enzyme-Linked Immunoassay Development for Small Molecules

A sandwich immunoassay theoretically exhibits higher sensitivity and specificity compared to a competitive counterpart; however, it is extremely difficult to obtain a pair of antibodies that can bind to a small molecule simultaneously, which is always thought to be a single epitope. In the present study, abamectin (ABM) was selected to prove the effect of hapten design and antibody recognition properties on the development of a sandwich immunoassay for small molecules. First, the epitopes of ABM were roughly located, and epitope distances were determined. Then, two haptens were designed by introducing spacer arms at the C4″-OH and C5-OH of ABM, respectively, aiming to provide the longest epitope distances. A total of seven rabbit polyclonal antibodies (pAbs) and 21 mouse monoclonal antibodies (mAbs) with various recognition properties were obtained. Extensive combinatorial associations of antibody pairs for simultaneously binding to ABM were performed, and only two mAb-mAb pairs were observed to achieve a sandwich immunoassay for ABM with a total success rate of 0.27%. The best mAb pair for sandwich immunoassay was confirmed by surface plasmon resonance, used to develop a sandwich immunoassay, and then evaluated by cross-reactivities and molecular docking with structurally similar analogues and abamectin. Altogether, the study provided a theoretical foundation as well as practical experience and demonstrated the importance of careful hapten design and extensive antibody screening to successfully establish the sandwich immunoassay for small molecules.

A strategy to enhance SERS detection sensitivity through the use of SiO2 beads in a 1536-well plate

The development of rapid and accurate assays is crucial to prevent the rapid spread of highly contagious respiratory infections such as coronavirus (COVID-19). Here, we developed a surface-enhanced Raman scattering (SERS)-enzyme-linked immunosorbent assay (ELISA) method that allows for the screening of multiple patient samples with high sensitivity on a 1536-well plate. As the well number on the ELISA well plate increases from 96 to 1536, the throughput of the assay increases but the sensitivity decreases due to the low number of biomarkers and the increase in non-specific binding species. To address this problem, silica (SiO2) beads were used to increase the surface-to-volume ratio and the loading density of biomarkers, thereby enhancing sensitivity. Using a three-dimensional gold nanoparticle (AuNP)@SiO2 SERS assay platform on a 1536-well plate, an immunoassay for the nucleocapsid protein biomarker of SARS-CoV-2 was performed and the limit of detection (LoD) decreased from 273 to 7.83 PFU/mL compared to using a two-dimensional assay platform with AuNPs. The proposed AuNPs@SiO2 SERS immunoassay (SERS-IA) platform is expected to dramatically decrease the false-negative diagnostic rate of the currently used lateral flow assay (LFA) or ELISA by enabling the positive diagnosis of patients with low virus concentrations.

Minimum Distance Between Two Epitopes in Sandwich Immunoassays for Small Molecules

The pursuit of the limit between dimensionalities is a scientific goal with high applicability. Sandwich immunoassay, usually based on two antibodies binding two epitopes, is one of the most popular mainstay tools in both academic and industrial fields. Herein, we determined and evaluated the minimum distance of two epitopes in sandwich immunoassays for small molecules. Briefly, nine model analytes comprising two hapten epitopes, that is, melamine (MEL) and p-nitroaniline (NIA), were designed by increasing the linear chain linkers brick by brick. Two groups of monoclonal antibodies (mAbs) were produced with different recognition properties toward MEL and NIA using 12 new haptens with different spacer arms. The results indicated that two epitopes of the analyte with a distance of only 2.4 Å could be simultaneously bound by two mAbs, which is the known limit of epitope distance in sandwich immunoassays thus far. We further found that an epitope distance of below 8.8 Å for the analyte generally induces noticeable steric hindrance of antibodies, preventing a sandwich immunoassay with high probability. These observations were investigated and evaluated by molecular docking, molecular dynamics, and surface plasmon resonance and using model and real analytes. Altogether, we determined the minimum distance of two epitopes and explored the molecular mechanism of the antibody-analyte-antibody ternary complex in sandwich immunoassays, providing a theoretical basis for hapten design, antibody discovery and development, and sandwich immunoassay establishment for small molecules.

Anti-Metatype Antibody Screening, Sandwich Immunoassay Development, and Structural Insights for β-Lactams Based on Penicillin Binding Protein

Theoretically, sandwich immunoassay is more sensitive and has a wider working range than that of competitive format. However, it has been thought that small molecules cannot be detected by the sandwich format due to their limited size. In the present study, we proposed a novel strategy for achieving sandwich immunoassay of β-lactams with low molecular weights. Firstly, five β-lactam antibiotics were selected to bind with penicillin binding protein (PBP)2x* to form complexes. Then, monoclonal and polyclonal antibodies against PBP2x*-β-lactams complexes were produced by animal immunization. Subsequently, the optimal pairing antibodies were utilized to establish sandwich immunoassay for detection of 18 PBP2x*-β-lactam complexes. Among them, ceftriaxone could be detected at as low as 1.65 ng/mL with working range of 1-1000 ng/mL in milk. To reveal the detection mechanism, computational chemistry and molecular recognition study were carried out. The results showed that β-lactams with a large size and complex structures maybe conducive to induce conformational changes of PBP2x*, and then exhibit greater possibility of being detected by sandwich immunoassay after combination with PBP2x*. This study provides insights for subsequent investigations of anti-metatype antibody screening and sandwich immunoassay establishment for small-molecule detection.

Binding affinity-guided design of a highly sensitive noncompetitive immunoassay for small molecule detection

Small molecules are immunochemically classified as hapten that lacking of at least two epitopes, usually using competitive format for establishing immunoassays. However, theoretically, noncompetitive immunoassay format is more sensitive and has a wider analytical range. In the present study, a novel hapten of halofuginone was synthesized and used to produce a monoclonal antibody (mAb). By analyzing the binding kinetics, we found that the affinity of analyte-enzyme to mAb was much greater than that of analyte, which could result in a low sensitivity of competitive assay format. Based on this, we established a novel noncompetitive immunoassay by using a replacement approach. The noncompetitive format has obvious advantages in sensitivity and analytical range, which promoted approximately 3.5- and 5-fold, respectively, compared to the competitive immunoassay. Ultimately, the newly designed noncompetitive immunoassay in this work will provide insights as well as alternative method to traditional small molecule competitive assays.

Asynchrony of spectral blue-shifts of quantum dot based digital homogeneous immunoassay

We present a femtomolar digital homogeneous immunoassay for the detection of cancer biomarkers.

A Portable Immunosensor with Differential Pressure Gauges Readout for Alpha Fetoprotein Detection

A portable, affordable and simple detector is requested in a "Point-of-Care-Testing" (POCT) system. In this study, we exploited the potentialities of Differential Pressure Gauge (DPG) to the orientation of POCT technology. Alpha fetoprotein (AFP) was chosen as a model analyte that could specifically recognized by its antigen, and a tiny outfits equipped with a DPG was employed as the signal readout. Pt/SiO2 nanospheres were synthesized and modified with the detection antibody. In the presence of target, a sandwich of immunocomplex specifically formed and the Pt/SiO2 had been modified on the capture antibody. Which then can be dissolved to release plenty of Pt and the suspensions were transferred into a closed vial filled with appropriated amount of hydrogen peroxide. Subsequently, hydrogen peroxide was decomposed to produce oxygen, resulting in the enhancement of pressure in the closed vial and which can be detected by DPG easily. Under the optimized conditions, the read out signal from DPG had a direct relationship with AFP concentrations in the range of 10~200 ng/mL, and the detection limit was as low as 3.4 ng/mL. The proposed portable sensor had been successfully applied to detect AFP in serum samples with satisfactory results. This strategy holds a great promising in biological analysis as its convenient operations, reliable results and flexible apparatus.

One-step immunoassay of C-reactive protein using droplet microfluidics

We present a wash-free high-sensitivity immunoassay of C-reactive proteins with droplet microfluidics. Microbeads are encapsulated within droplets for the immunoassay, and the droplets are scanned by a fluorescence detection platform to quantify the amount of proteins captured on the microbeads. The limit of detection determined by our platform is 0.01 μg mL^-1, which is ten times more sensitive than conventional high-sensitivity C-reactive protein assays. With the decrease in diffusion distance within droplets, the immunoassay requires only half of the time required for similar conventional approaches. This approach for carrying out immunoassays can potentially be applied to other biomarkers beyond C-reactive proteins.

Isolation, characterization, and identification of proteins interfering with enzyme-linked immunosorbent assay of antibiotics in fish matrix

The interaction between some proteins and immune globulin has been confirmed as an important source of matrix interference with the immunoassay of fishery products, but detailed biochemical properties of these proteins have not been indicated. Two interference-inducing proteins (42 and 36 kD) in flounder were isolated, characterized, and identified. Their influences on the immunoassay of norfloxacin were confirmed by western blotting and enzyme-linked immunosorbent assay. The pI value and pH stability of the two proteins were also investigated. Using LC-MS/MS, the two proteins were identified as fructose-bisphosphate aldolase, and such results were partly verified by the aldolase activity of the 42 and 36 kD isolates. Considering the prevalence of these proteins (as multi-functional aldolase of muscles) in foods, these results would help to further understand the matrix effects in various immunoassays as well as the development of effective techniques to improve the efficiency of immunoassays.

A lateral electrophoretic flow diagnostic assay

Immunochromatographic assays are a cornerstone tool in disease screening. To complement existing lateral flow assays (based on wicking flow) we introduce a lateral flow format that employs directed electrophoretic transport. The format is termed a "lateral e-flow assay" and is designed to support multiplexed detection using immobilized reaction volumes of capture antigen. To fabricate the lateral e-flow device, we employ mask-based UV photopatterning to selectively immobilize unmodified capture antigen along the microchannel in a barcode-like pattern. The channel-filling polyacrylamide hydrogel incorporates a photoactive moiety (benzophenone) to immobilize capture antigen to the hydrogel without a priori antigen modification. We report a heterogeneous sandwich assay using low-power electrophoresis to drive biospecimen through the capture antigen barcode. Fluorescence barcode readout is collected via a low-resource appropriate imaging system (CellScope). We characterize lateral e-flow assay performance and demonstrate a serum assay for antibodies to the hepatitis C virus (HCV). In a pilot study, the lateral e-flow assay positively identifies HCV+ human sera in 60 min. The lateral e-flow assay provides a flexible format for conducting multiplexed immunoassays relevant to confirmatory diagnosis in near-patient settings.

Nanoparticle-enhanced sensitivity of a nanogap-interdigitated electrode array impedimetric biosensor

Interdigitated electrode (IDE) arrays with nanometer-scale gaps have been utilized to enhance the sensitivity of affinity-based detection. The geometry of nanogap IDEs was first optimized on the basis of simulations of the electric field and current density. It was determined that the gap (G) between the electrodes was the most important geometric parameter in determining the distribution and strength of the electric field and the current density compared to the width (W) and height (H) of the IDEs. Several devices were materialized and analyzed for their sensitivity to the electrochemical environment using faradic electrochemical impedance spectroscopy (EIS) as the detection technique. Nanogap optimized IDEs were then employed as biosensors for the label-free, affinity-based detection of antitissue transglutaminase antibodies (αtTG-Abs), a biomarker for the detection of autoimmune disorder celiac sprue, triggered by ingesting gluten. The label-free biosensor assay was found to be less sensitive compared to on-chip ELISA. Gold nanoparticles (GNPs) were then employed to improve the sensitivity of the nanogap IDE-based biosensor. With GNPs, the transducer sensitivity increased by 350% over that of label-free detection. The suitability of nanogap IDEs as biosensor transducers for EIS in label-free and GNP-labeled formats was established. The immunobiosensor assay detection sensitivity with the GNPs was found comparable to ELISA.

Heterogeneous immunoassays in microfluidic format using fluorescence detection with integrated amorphous silicon photodiodes

Miniaturization of immunoassays through microfluidic technology has the potential to decrease the time and the quantity of reactants required for analysis, together with the potential of achieving multiplexing and portability. A lab-on-chip system incorporating a thin-film amorphous silicon (a-Si:H) photodiode microfabricated on a glass substrate with a thin-film amorphous silicon-carbon alloy directly deposited above the photodiode and acting as a fluorescence filter is integrated with a polydimethylsiloxane-based microfluidic network for the direct detection of antibody-antigen molecular recognition reactions using fluorescence. The model immunoassay used consists of primary antibody adsorption to the microchannel walls followed by its recognition by a secondary antibody labeled with a fluorescent quantum-dot tag. The conditions for the flow-through analysis in the microfluidic format were defined and the total assay time was 30 min. Specific molecular recognition was quantitatively detected. The measurements made with the a-Si:H photodiode are consistent with that obtained with a fluorescence microscope and both show a linear dependence on the antibody concentration in the nanomolar-micromolar range.

Practical biophysics: Sensors for rapid detection of biological targets utilizing target-induced oligonucleotide annealing

Detection and quantitation of biomolecules is one of the most commonly performed measurements in biomedical research and clinical diagnostics. There is high demand for convenient, rapid and sensitive biomolecule detection methodologies. In this review we discuss a family of sensors that have been developed in our laboratory that share a common simple biophysical mechanism of action and that are capable of rapid detection of a diverse range of biological targets. The sensors generate fluorescence signal in the presence of the target molecule through target-induced association of short fluorochrome-labeled complementary oligonucleotides that are attached to target recognition elements of the sensors (antibodies, aptamers, etc.) via nanometer scale flexible linkers. This sensor design can be used for detecting proteins, antibodies, nucleic acids and whole cells. The assays using these sensors require only adding a sample to the sensor mix followed by simple fluorescence intensity readout. The simplicity, the speed of detection and the potential for miniaturization are the main assets of these sensors.

Antigen peptide-based immunosensors for rapid detection of antibodies and antigens

The homogeneous immunosensor design described here utilizes the bivalent nature of the antibody. Antigen peptide is conjugated using flexible linkers with short complementary oligonucleotides (signaling oligonucleotides), each of which containing a fluorochrome that can form a fluorescence resonance energy transfer (FRET) donor-acceptor pair. The complementary signaling oligonucleotides are short enough to prevent their annealing on their own. Binding of the peptide-signaling oligonucleotide constructs to bivalent antibody results in a large increase in local concentration of signaling oligonucleotides causing their annealing and appearance of FRET signal. We used simple model system (antibiotin antibody) to obtain proof-of-principle validation of the sensor design. We then constructed two sensors based on two peptides corresponding to the antigens of two antibodies raised against human cardiac troponin I. We demonstrated that these sensors could be used for sensitive detection of the antibody and for competition-based detection of the intact troponin I. Furthermore, we showed that these sensors could be used for detection of kinase activity targeting the antigen peptide. These simple and robust immunosensors may find applications in antibody detection (for example, in diagnosis of autoimmune or infectious disease), in protein detection (especially when speed of detection is essential), and in assays for detecting enzymatic activities involved in post-translational modifications of proteins.

Molecular pincers: antibody-based homogeneous protein sensors

We describe here a new homogeneous antibody-based protein sensor design (molecular pincers) that allows rapid and sensitive detection of a specific protein in solution. In the presence of the target protein these sensors produce fluorescence signal derived from target-dependent annealing of short complementary fluorochrome-labeled oligonucleotides attached to a pair of target-specific antibodies via nanometer-scale flexible linkers. The sensors allow near-instantaneous detection of the target with sensitivity and specificity approaching that of enzyme-linked immunosorbent assay (ELISA) but requiring no sample manipulation other then the addition of the sample to the sensor mix. We used cardiac troponin I and C-reactive protein as the targets to validate these desirable properties of the sensors. Due to the availability of antibodies to thousands of interesting targets and the straightforward design blueprint of the sensors we expect their wide-ranging applications in research and medical diagnosis, especially when simplicity, high throughput, and short detection time are essential.

Investigation of several parameters influencing signal generation in flow-through membrane-based enzyme immunoassay

Rapid-response analytical tests that can be performed at the point of sampling are based on a visual detection system. The influence of different factors on the signal generation in a membrane-based enzyme immunoassay was investigated. The research was applied to a flow-through immunoassay for the detection of ochratoxin A (OTA). This assay format is a very convenient, simple and fast qualitative screening tool. Conjugates of OTA with horseradish peroxidase (HRP) and alkaline phosphatase (AP) were used as enzyme tracers. A new conjugate OTA-AP has been synthesized in our laboratory and its performance in the assay was compared with that of OTA-HRP. Different substrate systems for HRP and AP were compared. Several reagents, including polymers and surfactants, were tested for their possible effect on signal generation with the use of OTA-HRP conjugate. Polymers such as poly(vinyl alcohol) (PVA) and poly(ethylene glycol) (PEG) 6000 exerted a favourable effect on signal amplification, whereas surfactants negatively affected assay performance. The highest signal amplification (30-70% compared to the standard assay procedure) was achieved using 0.5% PVA in tetramethylbenzidine (TMB) Colorburst substrate solution and phosphate-buffered saline (PBS) for the washing step. It allowed more reliable visual estimation of the results from OTA-HRP assay. Exclusion of the detergent (Tween 20) from the washing solution exerted a favourable effect on assay performance using both enzyme tracers. The assay using OTA-HRP was more susceptible to matrix interferences than the assay with OTA-AP. Signal development in the matrix was better for the OTA-AP assay and visual estimation of the results was easier to perform in this case. For the analysis of spiked wheat samples, OTA-AP conjugate gave a more sensitive, stable and reproducible assay with a cut-off level of 4 microg kg(-1) for OTA. The application of the new OTA-AP conjugate resulted in improved assay performance for the food samples.

Sensitivity enhancement of surface plasmon resonance biosensing of small molecules

Surface plasmon resonance (SPR) biosensor formats using gold nanoparticle or protein signal amplification for the sensitive assay of small molecules were developed using progesterone as a model compound. Progesterone was immobilized to a dextran surface in the Biacore biosensor through in situ covalent immobilization using an oligoethylene glycol linker attached to the 4 position of the steroid. This surface produced stable antibody binding for in excess of 1100 assay cycles. Using this surface, assays were developed for progesterone using 10- and 20-nm gold-streptavidin labels attached to biotinylated monoclonal antibody in both label prebinding and sequential binding formats. Prelabeling formats gave no signal enhancement but produced assays with limits of detection of 143 pg/ml, compared with approximately 1 ng/ml in previous studies. Sequential binding formats gave signal enhancements of 2.2-fold over the monoclonal antibody and a limit of detection of 23.1 pg/ml. It was found that secondary antibody labeling gave 8.1-fold signal enhancements and a limit of detection of 20.1 pg/ml, whereas use of secondary antibody-25 nm gold complexes provided more signal enhancement (13-fold) and a further improvement in limit of detection of 8.6 pg/ml.

Fluorescence resonance energy transfer-based detection of analytes using antiidiotypic affinity protein pairs

A new method for specific detection of proteins based on fluorescence resonance energy transfer (FRET) using affinity proteins (affibodies) derived from combinatorial engineering of Staphylococcal protein A has been developed. Antiidiotypic affibody pairs were used in a homogeneous competitive binding assay, where the idiotypic, target-specific affibody was labeled with fluorescein and the antiidiotypic affibody was labeled with tetramethylrhodamine. Intermolecular FRET between the two fluorescent probes was observed in the antiidiotypic affibody complex, but upon addition of target protein the antiidiotypic affibody was displaced, which was monitored by a shift in the relative emission of the donor and acceptor fluorophores. The feasibility of the system was demonstrated by the detection of IgA and Taq DNA polymerase with high specificity, using two different antiidiotypic affibody pairs. Detection of Taq DNA polymerase in 25% human plasma was successfully carried out, demonstrating that the method can be used for analysis of proteins in samples of complex composition.

Technical Note: Protein Conjugate-Based Immunoassay of Whole Milk Progesterone

The objectives were to develop a novel protein conjugate-based ELISA test for whole milk progesterone with a dynamic range capable of fully profiling estrous cycles in the dairy cow and to study effects of whole milk medium on antibody binding to progesterone-protein conjugates. A series of progesterone-4-ovalbumin conjugates with different length intermediate linkers were applied as coating antigens in an ELISA format to determine antibody-binding performance in whole milk. Use of an 18-atom linker gave higher binding than use of a 4- or 11-atom linker at certain conjugate concentrations, but no further increase was observed with increasing linker length. An ELISA constructed with the 18-atom linker conjugate gave a detection limit of 0.089 ng/mL progesterone and correlated well to an established radioimmunoassay procedure (r = 0.94). The assay has the distinct advantages of a wide linear range (0.1 to 100 ng/mL), allowing full profiling of bovine estrous cycles, use of whole milk directly without extraction or prior dilution, and employing more easily purified protein conjugates as coating antigens compared with commercial progesterone-enzyme conjugate for milk ELISA assays.

Kinetic analysis of interactions between bispecific monoclonal antibodies and immobilized antigens using a resonant mirror biosensor

A resonant mirror biosensor (IAsys) protocol is described for the comparative kinetic analysis of the ability of monoclonal antibodies (Mabs) and bispecific antibodies (Babs) to bind immobilized antigens. The protocol has been optimized and validated using the panel of affinity-purified antibodies, including two parental Mabs, one specific to human immunoglobulin G (hIgG) and another specific to horseradish peroxidase (HRP), and a Bab derived thereof by cell fusion (anti-hIgG/HRP Bab). The real-time kinetic analysis of antigen-antibody interactions using this protocol allows to demonstrate the differences in the avidity of bivalently binding Mabs and monovalent Babs. As shown in our previous study [J. Immunol. Methods 261 (2002) 103], the observed equilibrium association constants (Kass) determined by IAsys using this protocol yield figures almost overlapping with those obtained by solid-phase radioimmunoassay (RIA). The described protocol is suited for the investigation of the effects of valency on the binding properties of antibodies. It also may be applied for the selection of Mabs and Babs with desired features, for different fields of application.

Analysis of the binding of bispecific monoclonal antibodies with immobilized antigens (human IgG and horseradish peroxidase) using a resonant mirror biosensor

The interaction between two monoclonal antibodies (mAbs) and their corresponding bispecific antibody (bAb) with immobilized antigens has been examined using a resonant mirror biosensor (IAsys). BAbs were produced by cell fusion. The analysed panel of affinity-purified antibodies included two parental mAbs, one specific to human IgG (hIgG), and another specific to horseradish peroxidase (HRP), and a bAb derived thereof (anti-hIgG/HRP). The real-time analysis showed the drastic differences in the avidity of bivalent anti-HRP mAbs and anti-HRP shoulder of bAbs. Thus, the observed equilibrium association constant (K(ass)) of anti-HRP mAbs was about 50 times higher that of anti-HRP shoulder of bAbs. The ratio of association rate constants (k(ass)) of mAbs and bAbs was about two, due to the statistical factor of two binding sites per bivalent antibody molecule. However, the dissociation rate constant (k(diss)) of anti-HRP shoulder of bAbs was 21 times higher k(diss) of anti-HRP mAbs. The comparison with the theoretical model shows that these observations are consistent only with a situation in which bivalent binding of mAbs with immobilized HRP predominates over monovalent binding. On the contrary, the second parental mAb (anti-hIgG) did not show the increase in avidity due to bivalent binding, compared to the anti-hIgG shoulder of bAbs, suggesting that this mAb was bound monovalently to immobilized hIgG. The K(ass) values determined by solid-phase radioimmunoassay (RIA) yielded figures almost overlapping with those obtained by IAsys. The results of the comparison of bAbs and mAbs are discussed from the viewpoint of the use of bAbs in heterogeneous systems. On the other hand, these data demonstrate that real-time analysis of antibody binding parameters in IAsys biosensor is valuable for the selection of mAbs and bAbs with desired features, for different fields of application.

The comparison of the ability of monoclonal antibodies directed to different proteins (human IgG, human myoglobin and HRP) and bispecific antibodies derived thereof to bind antigens immobilized on a surface of a solid phase

BACKGROUND

Bindings of mouse monoclonal antibodies (mAbs) and affinity purified bispecific antibodies (bAbs), derived thereof, to antigens adsorbed on immunoplates have been compared, using ELISA and RIA methods.

METHODS

The analysed panel of antibodies included mAbs specific to human myoglobin (Mb), human IgG (hIgG) and horseradish peroxidase (HRP) and biologically produced bAbs with double specificity to Mb and HRP, and to hIgG and HRP.

RESULTS

The degree of difference between different mAbs and corresponding bAbs varied markedly from antibody to antibody, depending on whether the parental mAbs could bind immobilized antigens bivalently. The observed equilibrium binding constant (K(obs)) for anti-HRP mAbs was 21-38 times higher that of anti-HRP site of bAbs (anti-hIgG/HRP or anti-Mb/HRP, respectively), due to bivalent binding of mAbs. Anti-Mb mAbs also bound bivalently with immobilized Mb. On the contrary, anti-hIgG mAbs bound monovalently with immobilized hIgG in the same conditions. The avidity of anti-Mb/HRP bAbs increased, if both antigens were simultaneously adsorbed on a solid phase.

CONCLUSIONS

The obtained data indicate that the use of bAbs in heterogeneous immunoassays instead of traditional mAb-enzyme conjugates hardly can provide the significant gain in assay performance if parental mAbs bind bivalently.

Exploiting antibody-based technologies to manage environmental pollution

Many commodities used in the food, cosmetic, chemical and environmental industrial sectors function by binding to other molecules. Antibodies can bind virtually any molecule, from large proteins to small organic ligands, and could replace substances with undesirable medical, social or environmental side effects, if they could be provided in stable configurations and in quantities and at costs acceptable to industry. Antibody fragments also offer the possibility of sensitive detection and efficient removal of organic pollutants from the environment.

Affinity capillary electrophoresis: important application areas and some recent developments

Affinity capillary electrophoresis (ACE) is a broad term referring to the separation by capillary electrophoresis of substances that participate in specific or non-specific affinity interactions during electrophoresis. The interacting molecules can be found free in solution or can be immobilized to a solid support. Every ACE mode has advantages and disadvantages. Each can be used for a wide variety of applications. This paper focuses on applications that include purification and concentration of analytes present in diluted solutions or complex matrices, quantitation of analytes based on calibration curves, and estimation of binding constants from direct and derived binding curves based on quantitation of analytes or on analyte migration shifts. A more recent chemicoaffinity strategy in capillary electrophoresis/capillary electrochromatography (CE/CEC) termed molecular imprinting ('plastic antibodies') is discussed as well. Although most ACE studies are aimed at characterizing small-molecular mass analytes such as drugs, hormones, and peptides, some efforts have been pursued to characterize larger biopolymers including proteins, such as immunoglobulins. Examples of affinity interactions that have been studied are antigen-antibody, hapten-antibody, lectin-sugar, drug-protein, and enzyme-substrate complexes using ultraviolet, laser-induced fluorescence, and mass spectrometer detectors. This paper also addresses the critical issue of background electrolyte selection and quantitation of analytes. Specific examples of bioaffinity applications are presented, and the future of ACE in the biomedical field is discussed.

Enhanced specificity for small molecules in a convenient format which removes a limitation of competitive immunoassay

Anti-complex immunoassay systems for small molecules permit the exquisite specificity achievable with monoclonal antibodies to be expressed to an extent which is not possible with competitive format immunoassay. While our previously reported anti-complex system is superior to competitive systems in terms of sensitivity, precision and specificity we have found that this specificity may be enhanced dramatically by simply interposing a wash step between the addition of sample and that of the labelled anti-complex antibody. When such a wash step was attempted with the competitive format system, after addition of sample but before addition of the labelled component, assay performance was degraded to the extent of making it unusable. We suggest, therefore, that the inherent flexibility of the anti-complex approach for small molecule assay creates an opportunity for remarkable enhancement of the functional specificity of primary antibody.