Probing the role of interfacial residues in a dimerization inhibitor of HIV-1 protease

Dimerization of HIV-1 protease occurs through two steps relating to the mechanism of protease dimerization inhibition by darunavir

Dimerization of HIV-1 protease (PR) subunits is an essential process for PR's acquisition of proteolytic activity, which plays a critical role in the maturation of HIV-1. Recombinant wild-type PR (PR(WT)) proved to dimerize, as examined with electrospray ionization mass spectrometry; however, two active site interface PR mutants (PR(T26A) and PR(R87K)) remained monomeric. On the other hand, two termini interface PR mutants (PR(1-C95A) and PR(97/99)) took both monomeric and dimeric forms. Differential scanning fluorimetry indicated that PR(1-C95A) and PR(97/99) dimers were substantially less stable than PR(WT) dimers. These data indicate that intermolecular interactions of two monomers occur first at the active site interface, generating unstable or transient dimers, and interactions at the termini interface subsequently occur, generating stable dimers. Darunavir (DRV), an HIV-1 protease inhibitor, inhibits not only proteolytic activity but also PR dimerization. DRV bound to protease monomers in a one-to-one molar ratio, inhibiting the first step of PR dimerization, whereas conventional protease inhibitors (such as saquinavir) that inhibit enzymatic activity but not dimerization failed to bind to monomers. DRV also bound to mutant PRs containing the transframe region-added PR (TFR-PR(D25N) and TFR-PR(D25N-7AA)), whereas saquinavir did not bind to TFR-PR(D25N) or TFR-PR(D25N-7AA). Notably, DRV failed to bind to mutant PR containing four amino acid substitutions (V32I, L33F, I54M, and I84V) that confer resistance to DRV on HIV-1. To our knowledge, the present report represents the first demonstration of the two-step PR dimerization dynamics and the mechanism of dimerization inhibition by DRV, which should help design further, more potent novel PIs.

Current and Novel Inhibitors of HIV Protease

The design, development and clinical success of HIV protease inhibitors represent one of the most remarkable achievements of molecular medicine. This review describes all nine currently available FDA-approved protease inhibitors, discusses their pharmacokinetic properties, off-target activities, side-effects, and resistance profiles. The compounds in the various stages of clinical development are also introduced, as well as alternative approaches, aiming at other functional domains of HIV PR. The potential of these novel compounds to open new way to the rational drug design of human viruses is critically assessed.

Analysis and characterization of dimerization inhibition of a multi-drug-resistant human immunodeficiency virus type 1 protease using a novel size-exclusion chromatographic approach

Active-site inhibitors of HIV-1 PR (protease) block viral replication by preventing viral maturation. However, HIV-1 often develops resistance to active-site inhibitors through multiple mutations in PR and therefore recent efforts have focused on inhibiting PR dimerization as an alternative approach. Dimerization inhibitors have been identified using kinetic analysis, but additional characterization of the effect of these inhibitors on PR by physical methods has been difficult. In the present study, we identified a PR(MDR) (multi-drug-resistant HIV-1 PR) that was highly resistant to autoproteolysis. Using this PR and a novel size-exclusion chromatographic approach that incorporated fluorescence and MS detection, we were able to demonstrate inhibition of dimerization using P27 (peptide 27), a peptide dimerization inhibitor of PR previously identified on the basis of kinetic analysis. Incubation of PR(MDR) with P27, or other dimerization inhibitors, led to a dose- and time-dependent formation of PR monomers based on the change in elution time by size exclusion and its similar elution time to engineered forms of monomeric PR, namely PR(T26A) and glutathionylated PR. In contrast, incubation of PR(MDR) with a potent active-site inhibitor did not change the elution time for the PR(MDR) dimer. The monomeric PR induced by P27 had fluorescent characteristics which were consistent with unfolded PR. Structure-activity studies identified the active regions of P27 and experiments were performed to examine the effect of other dimerization inhibitors on PR. The present study is the first characterization of dimerization inhibition of PR(MDR), a prime target for these inhibitors, using a novel size-exclusion chromatographic approach.

Chemogenomics with protein secondary-structure mimetics

During molecular recognition of proteins in biological systems, helices, reverse turns, and beta-sheets are dominant motifs. Often there are therapeutic reasons for blocking such recognition sites, and significant progress has been made by medicinal chemists in the design and synthesis of semirigid molecular scaffolds on which to display amino acid side chains. The basic premise is that preorganization of the competing ligand enhances the binding affinity and potential selectivity of the inhibitor. In this chapter, current progress in these efforts is reviewed.

HIV-1 protease function and structure studies with the simplicial neighborhood analysis of protein packing method

The Simplicial Neighborhood Analysis of Protein Packing (SNAPP) method was used to predict the effect of mutagenesis on the enzymatic activity of the HIV-1 protease (HIVP). SNAPP relies on a four-body statistical scoring function derived from the analysis of spatially nearest neighbor residue compositional preferences in a diverse and representative subset of protein structures from the Protein Data Bank. The method was applied to the analysis of HIVP mutants with residue substitutions in the hydrophobic core as well as at the interface between the two protease monomers. Both wild-type and tethered structures were employed in the calculations. We obtained a strong correlation, with R(2) as high as 0.96, between DeltaSNAPP score (i.e., the difference in SNAPP scores between wild-type and mutant proteins) and the protease catalytic activity for tethered structures. However, a weaker but significant correlation was obtained for nontethered structures. Our analysis identified residues both in the hydrophobic core and at the dimeric interface that are very important for the protease function. This study demonstrates a potential utility of the SNAPP method for rational design of mutagenesis studies and protein engineering.

Computational mutagenesis studies of protein structure‐function correlations

Topological scores, measures of sequence-structure compatibility, are calculated for all 1,881 single point mutants of the human immunodeficiency virus (HIV)-1 protease using a four-body statistical potential function based on Delaunay tessellation of protein structure. Comparison of the mutant topological score data with experimental data from alanine scan studies specifically on the dimer interface residues supports previous findings that 1) L97 and F99 contribute greatly to the Gibbs energy of HIV-1 protease dimerization, 2) Q2 and T4 contribute the least toward the Gibbs energy, and 3) C-terminal residues are more sensitive to mutations than those at the N-terminus. For a more comprehensive treatment of the relationship between protease structure and function, mutant topological scores are compared with the activity levels for a set of 536 experimentally synthesized protease mutants, and a significant correlation is observed. Finally, this structure-function correlation is similarly identified by examining model systems consisting of 2,015 single point mutants of bacteriophage T4 lysozyme as well as 366 single point mutants of HIV-1 reverse transcriptase and is hypothesized to be a property generally applicable to all proteins.

Tunable Inhibition and Denaturation of α-Chymotrypsin with Amino Acid-Functionalized Gold Nanoparticles

Water-soluble gold nanoparticles bearing diverse l-amino acid terminals have been fabricated to probe the effect of receptor surface on protein surface binding. The interaction of these nanoparticles with alpha-chymotrypsin (ChT) was investigated by activity assay, gel electrophoresis, zeta-potential, circular dichroism, and fluorescence spectroscopy. The results show that both electrostatic and hydrophobic interactions between the hydrophobic patches of receptors and the protein contribute to the stability of the complex. The microscopic binding constants for these receptor-protein systems are 10(6)-10(7) M(-1), with the capacity of the nanoparticle receptors to bind proteins determined by both their surface area and their surface charge density. Furthermore, it is found that the hydrophilic side chains destabilize the ChT structure through either competitive hydrogen bonding or breakage of salt bridges, whereas denaturation was much slower with hydrophobic amino acid side chains. Significantly, correlation between the hydrophobicity index of amino acid side chains and the binding affinity and denaturation rates was observed.

Comprehensive mutagenesis of HIV-1 protease: a computational geometry approach

A computational geometry technique based on Delaunay tessellation of protein structure, represented by C(alpha) atoms, is used to study effects of single residue mutations on sequence-structure compatibility in HIV-1 protease. Profiles of residue scores derived from the four-body statistical potential are constructed for all 1881 mutants of the HIV-1 protease monomer and compared with the profile of the wild-type protein. The profiles for an isolated monomer of HIV-1 protease and the identical monomer in a dimeric state with an inhibitor are analyzed to elucidate changes to structural stability. Protease residues shown to undergo the greatest impact are those forming the dimer interface and flap region, as well as those known to be involved in inhibitor binding.

Novel strategies for targeting the dimerization interface of HIV protease with cross-linked interfacial peptides

As the prevalence of AIDS continues to grow, and current therapeutic agents begin to lose efficacy, the need for alternative treatments to combat HIV has become significantly greater. Targeting the highly conserved dimerization interface of HIV protease (PR) with interfacial peptides has been shown to reduce the activity of the enzyme due to generation of inactive monomers. The potency of these peptide-based inhibitors has been dramatically increased by cross-linking the interfacial sequences derived from HIV PR. This review focuses on a variety of strategies to develop potent, low-molecular-weight dimerization inhibitors of HIV PR.

Protein-protein interactions: mechanisms and modification by drugs

Protein-protein interactions form the proteinaceous network, which plays a central role in numerous processes in the cell. This review highlights the main structures, properties of contact surfaces, and forces involved in protein-protein interactions. The properties of protein contact surfaces depend on their functions. The characteristics of contact surfaces of short-lived protein complexes share some similarities with the active sites of enzymes. The contact surfaces of permanent complexes resemble domain contacts or the protein core. It is reasonable to consider protein-protein complex formation as a continuation of protein folding. The contact surfaces of the protein complexes have unique structure and properties, so they represent prospective targets for a new generation of drugs. During the last decade, numerous investigations have been undertaken to find or design small molecules that block protein dimerization or protein(peptide)-receptor interaction, or on the other hand, induce protein dimerization.

Dimerization inhibitors of HIV-1 protease

By targeting the highly conserved antiparallel beta-sheet formed by the interdigitation of the N- and C-terminal strands of each monomer, dimerization inhibitors of HIV-1 protease may be useful to overcome the drug resistance observed with current active-site directed antiproteases. Sequestration of the monomer by the inhibitor (or disruption of the dimer interface) prevents the correct assembly of the inactive monomers to active enzyme. Strategies for the design of drugs targeting the dimer interface are described. Various dimerization inhibitors are reported including N- and C-terminal mimetics, lipopeptides and cross-linked interface peptides.

Folded monomer of HIV-1 protease

The mature human immunodeficiency virus type 1 protease rapidly folds into an enzymatically active stable dimer, exhibiting an intricate interplay between structure formation and dimerization. We now show by NMR and sedimentation equilibrium studies that a mutant protease containing the R87K substitution (PR(R87K)) within the highly conserved Gly(86)-Arg(87)-Asn(88) sequence forms a monomer with a fold similar to a single subunit of the dimer. However, binding of the inhibitor DMP323 to PR(R87K) produces a stable dimer complex. Based on the crystal structure and our NMR results, we postulate that loss of specific interactions involving the side chain of Arg(87) destabilizes PR(R87K) by perturbing the inner C-terminal beta-sheet (residues 96-99 from each monomer), a region that is sandwiched between the two beta-strands formed by the N-terminal residues (residues 1-4) in the mature protease. We systematically examined the folding, dimerization, and catalytic activities of mutant proteases comprising deletions of either one of the terminal regions (residues 1-4 or 96-99) or both. Although both N- and C-terminal beta-strands were found to contribute to dimer stability, our results indicate that the inner C-terminal strands are absolutely essential for dimer formation. Knowledge of the monomer fold and regions critical for dimerization may aid in the rational design of novel inhibitors of the protease to overcome the problem of drug resistance.

Targeting the dimerization interface for irreversible inhibition of HIV-1 protease

A novel strategy was used to irreversibly inhibit HIV-1 protease. The inhibitor was designed to form a disulfide bond with Cys95, present at the dimerization interface of HIV-1 protease. The inhibitor was shown to be active against HIV-1 protease with K(inact) = 3.7 microM and V(inact) = 0.012 min(-1).