Synthesis and evaluation of RGD peptidomimetics aimed at surface bioderivatization of polymer substrates

RGD Peptidomimetic MMAE-Conjugate Addressing Integrin αVβ3-Expressing Cells with High Targeting Index

Small molecule-drug conjugates (SMDCs) mimicking the RGD sequence (-Arg-Gly-Asp-) with a non-peptide moiety require a pharmacophore-independent attachment site. A library of 36 sulfonamide-modified RGD mimetics with nM to pM affinity for integrin α_V β₃ was synthesized and analysed via DAD mapping. The best structure of the conjugable RGD mimetic was used and a linker was attached to an aromatic ring by Negishi cross-coupling. The product retained high affinity and selectivity for integrin α_V β₃ . The conjugable RGD mimetic was then attached to an enzymatically cleavable GKGEVA linker equipped with a self-immolative PABC and the antimitotic drug monomethyl auristatin E (MMAE). The resulting SMDC preferred binding to integrin α_V β₃ over α₅ β₁ in a ratio of 1 : 4519 (ELISA) and showed selectivity for α_V β₃ -positive WM115 cells over α_V β₃ -negative M21-L cells in the in vitro cell adhesion assay as well as in cell viability assays with a targeting index of 134 (M21-L/WM115).

Proteins, peptides and peptidomimetics as active agents in implant surface functionalization

The recent impact of implants on improving the human life quality has been enormous. During the past two decades we witnessed major advancements in both material and structural development of implants. They were driven mainly by the increasing patients' demand and the need to address the major issues that come along with the initially underestimated complexity of the bone-implant interface. While both, the materials and design of implants reached a certain, balanced state, recent years brought a shift in focus towards the bone-implant interface as the weakest link in the increasing implant long-term usability. As a result, several approaches were developed. They aimed at influencing and enhancing the implant osseointegration and its proper behavior when under load and stress. With this review, we would like to discuss the recent advancements in the field of implant surface modifications, emphasizing the importance of chemical methods, focusing on proteins, peptides and peptidomimetics as promising agents for titanium surface coatings.

Bicyclic RGD peptides with high integrin α v β 3 and α 5 β 1 affinity promote cell adhesion on elastin-like recombinamers

Biomaterial design in tissue engineering aims to identify appropriate cellular microenvironments in which cells can grow and guide new tissue formation. Despite the large diversity of synthetic polymers available for regenerative medicine, most of them fail to fully match the functional properties of their native counterparts. In contrast, the few biological alternatives employed as biomaterials lack the versatility that chemical synthesis can offer. Herein, we studied the HUVEC adhesion and proliferation properties of elastin-like recombinamers (ELRs) that were covalently functionalized with each three high-affinity and selectivity α _v β ₃- and α ₅ β ₁-binding bicyclic RGD peptides. Next to the bicycles, ELRs were also functionalized with various integrin-binding benchmark peptides, i.e. knottin-RGD, cyclo-[KRGDf] and GRGDS, allowing for better classification of the obtained results. Covalent functionalization with the RGD peptides, as validated by MALDI-TOF analysis, guarantees flexibility and minimal steric hindrance for interactions with cellular integrins. In addition to the covalently modified RGD-ELRs, we also synthesized another benchmark ELR comprising RGD as part of the backbone. HUVEC adhesion and proliferation analysis using the PicoGreen® assay revealed a higher short-term adhesion and proliferative capacity of cells on ELR surfaces functionalized with high affinity, integrin-binding bicyclic RGD-peptides compared with the ELRs containing RGD in the backbone.

Tailoring the Interface of Biomaterials to Design Effective Scaffolds

Tissue engineering (TE) is a multidisciplinary science, which including principles from material science, biology and medicine aims to develop biological substitutes to restore damaged tissues and organs. A major challenge in TE is the choice of suitable biomaterial to fabricate a scaffold that mimics native extracellular matrix guiding resident stem cells to regenerate the functional tissue. Ideally, the biomaterial should be tailored in order that the final scaffold would be (i) biodegradable to be gradually replaced by regenerating new tissue, (ii) mechanically similar to the tissue to regenerate, (iii) porous to allow cell growth as nutrient, oxygen and waste transport and (iv) bioactive to promote cell adhesion and differentiation. With this perspective, this review discusses the options and challenges facing biomaterial selection when a scaffold has to be designed. We highlight the possibilities in the final mold the materials should assume and the most effective techniques for its fabrication depending on the target tissue, including the alternatives to ameliorate its bioactivity. Furthermore, particular attention has been given to the influence that all these aspects have on resident cells considering the frontiers of materiobiology. In addition, a focus on chitosan as a versatile biomaterial for TE scaffold fabrication has been done, highlighting its latest advances in the literature on bone, skin, cartilage and cornea TE.

αvβ3- or α5β1-Integrin-Selective Peptidomimetics for Surface Coating

Engineering biomaterials with integrin-binding activity is a very powerful approach to promote cell adhesion, modulate cell behavior, and induce specific biological responses at the surface level. The aim of this Review is to illustrate the evolution of surface-coating molecules in this field: from peptides and proteins with relatively low integrin-binding activity and receptor selectivity to highly active and selective peptidomimetic ligands. In particular, we will bring into focus the difficult challenge of achieving selectivity between the two closely related integrin subtypes αvβ3 and α5β1. The functionalization of surfaces with such peptidomimetics opens the way for a new generation of highly specific cell-instructive surfaces to dissect the biological role of integrin subtypes and for application in tissue engineering and regenerative medicine.

The biological response of poly(L-lactide) films modified by different biomolecules: role of the coating strategy

The interactions between the surface of synthetic scaffolds and cells play an important role in tissue engineering applications. To improve these interactions, two strategies are generally followed: surface coating with large proteins and surface grafting with small peptides. The proteins and peptides more often used and derived from the extracellular matrix, are fibronectin, laminin, and their active peptides, RGD and SIKVAV, respectively. The aim of this work was to compare the effects of coating and grafting of poly(L-lactide) (PLLA) films on MRC5 fibroblast cells. Grafting reactions were verified by X-ray photoelectron spectroscopy. Cell adhesion and proliferation on coated and grafted PLLA surfaces were measured by cell counting. Vinculin localization and distribution were performed on cell cultured on PLLA samples using a fluorescence microscopy technique. Finally, western blot was performed to compare signals of cell adhesion proteins, such as vinculin, Rac1, and RhoA, as well as cell proliferation, such as PCNA. These tests showed similar results for fibronectin and laminin coated PLLA, while RGD grafting is more effective compared with SIKVAV grafting. Considering the overall view of these results, although coating and grafting can both be regarded as effective methods for surface modification to enhance cell adhesion and proliferation on a biomaterial, RGD grafted PLLA show better cell adhesion and proliferation than coated PLLA, while SIKVAV grafted PLLA show similar adhesion but worse proliferation. These data verified different biological effects depending on the surface modification method used.

Small-molecule-modified surfaces engage cells through the αvβ3 integrin

Integrins play myriad and vital roles in development and disease. They connect a cell with its surroundings and transmit chemical and mechanical signals across the plasma membrane to the cell's interior. Dissecting their roles in cell behavior is complicated by their overlapping ligand specificity and shared downstream signaling components. In principle, immobilized synthetic peptides can mimic extracellular matrix proteins by supporting integrin-mediated adhesion, but most short peptide sequences lack selectivity for one integrin over others. In contrast, synthetic integrin antagonists can be highly selective. We hypothesized that this selectivity could be exploited if antagonists, when immobilized, could support cellular adhesion and activate signaling by engaging specific cell-surface integrins. To investigate this possibility, we designed a bifunctional (RGD)-based peptidomimetic for surface presentation. Our conjugate combines a high affinity integrin ligand with a biotin moiety; the former engages the α(v)β(3) integrin, and the latter allows for presentation on streptavidin-coated surfaces. Surfaces decorated with this ligand promote both cellular adhesion and integrin activation. Moreover, the selectivity of these surfaces for the α(v)β(3) integrin can be exploited to capture a subset of cells from a mixed population. We anticipate that surfaces displaying highly selective small molecule ligands can reveal the contributions of specific integrin heterodimers to cell adhesion and signaling.

Intravenous hemostat: nanotechnology to halt bleeding

Blood loss is the major cause of death in both civilian and battlefield traumas. Methods to staunch bleeding include pressure dressings and absorbent materials. For example, QuikClot effectively halts bleeding by absorbing large quantities of fluid and concentrating platelets to augment clotting, but these treatments are limited to compressible and exposed wounds. An ideal treatment would halt bleeding only at the injury site, be stable at room temperature, be administered easily, and work effectively for internal injuries. We have developed synthetic platelets based on Arg-Gly-Asp functionalized nanoparticles, which halve bleeding time after intravenous administration in a rat model of major trauma. The effects of these synthetic platelets surpass other treatments, including recombinant factor VIIa, which is used clinically for uncontrolled bleeding. Synthetic platelets were cleared within 24 hours at a dose of 20 mg/ml, and no complications were seen out to 7 days after infusion, the longest time point studied. These synthetic platelets may be useful for early intervention in trauma and demonstrate the role that nanotechnology can have in addressing unmet medical needs.

Cell adhesion and proliferation on hydrophilic dendritically modified surfaces

Dendritically modified, or "dendronized" surfaces are generated by modification of a substrate with perfectly branched polymers, known as dendrimers. Here, such dendronized surfaces were prepared by initial chemisorption of poly(ethylene glycol)-mono-thiol (HS-PEG(650)-OH) onto gold-coated silicon wafers, followed by divergent synthesis of aliphatic polyester dendrons, generation 1-4, starting from the terminal PEG OH- group. The adhesion and proliferation of human corneal epithelial cells (HCEC) and mouse 3T3 fibroblasts (M-3T3) as model cells on these hydroxyl-terminated dendronized surfaces were investigated. In addition, the effect of covalently attaching PEG mono-methyl ether (PEG-OMe) chains (M(n)=2000 Da) to the peripheral hydroxyl groups of G1- and G2-dendronized surfaces on adhesion and proliferation of the same cell lines was studied. Little or no HCEC adhesion was noted on gold surfaces modified with PEG mono-thiol (HO-PEG-SH) in serum-free medium. These cells showed a greater affinity for the dendronized surfaces compared to the control Au surfaces at early incubation stages (1 day). At longer incubation times, HCEC proliferation increased exponentially on the dendronized surfaces. However, when G1- and G2-dendronized surfaces were modified with PEG-OMe chains, adhesion of both HCEC and M-3T3 cells was significantly reduced. Cell studies with M-3T3 fibroblasts, carried out in serum-containing medium, showed that cell attachment was diminished for the PEG-grafted Au surfaces compared to the control Au and G1-G4 dendronized surfaces.

Surface Analysis by X-ray Photoelectron Spectroscopy of Sol−Gel Silica Modified with Covalently Bound Peptides

Chemical surface characterization of biologically modified sol-gel derived silica is critical but somewhat limited. This work demonstrates the ability of x-ray photoelectron spectroscopy (XPS) to characterize the surface chemistry of peptide modified sol-gel thin films based on the example of four different free peptide-silanes, denoted RGD, NID, KDI ,and YIG. The N 1s and C 1s peaks were found to be good fingerprints of the peptides, whereas O 1s overlapped with the signal of substrate oxygen and, therefore, the O 1s peak was not informative in the case of the thin films. The C 1s peak was fitted and the contribution of the residual hydrocarbons was sorted out. The curve-fitting procedure of the C 1s peak accounted for the different chemical states of carbon atoms in the peptide structure. The curve-fitting procedure was validated by analyzing free peptides in the powder form and was then applied to the characterization of the peptide-modified thin films. The XPS measured ratio between nitrogen and carbon for the peptide thin film was similar to the corresponding value calculated from the peptide structures. Angle resolved XPS confirmed the surface nature of peptides in modified thin films. The coverage and thickness of the peptides on the thin film surface depended on the peptide sequence. The coverage was in the range of 10% of a monolayer, and the layer thickness varied from 10 to 30 A. We believe that the different thicknesses and surface coverage are due to the local structure of the peptides, with the RGD and NID peptides taking a globule conformation and the YIG and KDI peptides adopting a more linear structure.

Synthesis of bisindolylmaleimides related to GF109203x and their efficient conversion to the bioactive indolocarbazoles

From a structure-activity relationship perspective, the new indolocarbazoles 11 and 12 have been synthesized and evaluated biologically as novel Chk1 inhibitors. Compounds 11 and 12 were synthesized in high yield from indole via bisindolylmaleimides 18 and 24.

Cell adhesive PET membranes by surface grafting of RGD peptidomimetics

A non-peptide mimic of the Arg-Gly Asp (RGD) active sequence of adhesive proteins (such as vitronectin) has been equipped with two different spacer-arms for surface anchorage. The covalent grafting on poly(ethylene terephthalate) (PET) membrane was realized via the activation of the hydroxyl polymer chain-ends by tosylation followed by nucleophilic substitution. The surface density of peptidomimetics was determined by X-ray photoelectron spectroscopy (XPS), on the basis of F/C atomic ratios since a fluorine tag was incorporated into the RGD-like compounds. The biological activity of soluble peptidomimetics was evaluated versus isolated human integrin alpha(v)beta(3) (vitronectin receptor), and versus CaCo2 cells. Inhibition of cellular adhesion was observed after pre-incubation of CaCo2 cells with soluble peptidomimetics. On the other hand a significant promotion of cellular adhesion resulted from the surface grafting of peptidomimetics on the PET culture substrate. The best performance was obtained with the RGD-like integrin ligand bearing a triethylene glycol spacer-arm.

RGD mounted on an L-proline scaffold

The construction of an L-proline scaffold that enforces a defined beta-turn loop for RGD is reported. A key feature was the use of SASRIN (super acid sensitive resin) that allowed solid-phase synthesis of the tetrapeptide. A HATU-induced cyclization of the sequence was successful, followed by a single acid-promoted deprotection of the final product.

Novel RGD-like molecules based on the tyrosine template: design, synthesis, and biological evaluation on isolated integrins αVβ3/αIIbβ3 and in cellular adhesion tests

RGD (Arg-Gly-Asp) peptidomimetics have been designed for covalent anchorage on biomaterials. The tyrosine template was thus equipped with (i) a basic side chain of various flexibility, (ii) an acidic side chain, which incorporated the XPS fluorine tag, and (iii) a spacer-arm terminated by a primary amine for surface grafting. The most active compounds showed IC50 values in the nanomolar range versus isolated human integrins alphaVbeta3 and alphaIIbbeta3. Preincubation of CaCo2 cells with soluble peptidomimetics (2 and 19a) prevented cellular adhesion on culture plates coated with vitronectin. On the other hand, peptidomimetics (19a and 19b) immobilized on a poly(ethylene)terephthalate membrane (PET) promoted CaCo2 cells adhesion. A modeling study at the ab initio level in MINI-1' basis allowed to compare the various synthetic ligands of integrins and to propose novel pharmacophore structures.

RGD modified polymers: biomaterials for stimulated cell adhesion and beyond

Since RGD peptides (R: arginine; G: glycine; D: aspartic acid) have been found to promote cell adhesion in 1984 (Cell attachment activity of fibronectin can be duplicated by small synthetic fragments of the molecule, Nature 309 (1984) 30), numerous materials have been RGD functionalized for academic studies or medical applications. This review gives an overview of RGD modified polymers, that have been used for cell adhesion, and provides information about technical aspects of RGD immobilization on polymers. The impacts of RGD peptide surface density, spatial arrangement as well as integrin affinity and selectivity on cell responses like adhesion and migration are discussed.

Protease-catalyzed tripeptide (RGD) synthesis

The tripeptide Bz-Arg-Gly-Asp(-OMe)-OH was synthesized by enzymatic method. Bz-Arg-Gly-OEt was synthesized by trypsin in ethanol containing 0.1 M Tris/HCl buffer (pH 8.0), and then H-Asp(-OMe)(2) was incorporated into the Bz-Arg-Gly-OEt using chymopapain in 0.25M CHES/NaOH buffer (pH = 9.0, EDTA 10 mM). The yield of Bz-Arg-Gly-OEt and Bz-Arg-Gly-Asp(-OMe)-OH were 80% and 70% using 1M Bz-Arg-OEt and 0.5M Bz-Arg-Gly-OEt, respectively. For Bz-Arg-Gly-OEt synthesis reaction at high concentrations of the substrates, the buffer content in ethanol was a key factor to determine the optimal reaction condition. In Bz-Arg-Gly-Asp(-OMe)-OH synthesis reaction, the yield was low in organic solvent due to various side products such as Bz-Arg-OH, Bz-Arg-Gly-OH, and Bz-Arg-Gly-Asp(-OMe)-Asp(-OMe)-OH, suggesting that chymopapain has a very broad substrate specificity of the S(1) site. The Bz-Arg-Gly-Asp(-OMe)-OH synthesis rate and its yield were dramatically elevated and the side reactions were reduced using only the CHES/NaOH buffer (pH = 9.0, EDTA 10 mM) as a reaction media. The final product Bz-Arg-Gly-Asp(-OMe)-OH was identified to be formed via C-terminal hydrolysis of Bz-Arg-Gly-Asp(-OMe)(2) after the nucleophile, H-Asp(-OMe)(2), was added.

Biological evaluation of RGD peptidomimetics, designed for the covalent derivatization of cell culture substrata, as potential promotors of cellular adhesion

Our aim was to replace the proteins and peptides, generally used for the biocompatibilization of polymer substrata, with synthetic molecules mimicking the RGD (Arg-Gly-Asp) active sequence. Based on the (L)-tyrosine template, RGD peptidomimetics were constructed; one molecule 3 was equipped with an anchorage arm that allowed its covalent grafting on a culture substratum made from poly(ethylene terephthalate) (PET) microporous membrane. The amount of fixed molecules was readily determined by XPS, using a fluorine tag incorporated in the peptidomimetic structure. The binding of peptidomimetics 1-3 to the vitronectin (VN) and fibronectin (FN) receptors could not be revealed in a test of inhibition of MSC 80 cells adhesion, by the synthetic compounds in solution placed in competition with the adhesive proteins (VN and FN) coating polystyrene plates. However, the cell-attachment activity of peptidomimetic 3 was shown by culturing CaCo2 cells, in the absence of serum, on the PET substratum grafted with 3. The performance of this support was similar to that of PET grafted with the reference peptide RGDS (Arg-Gly-Asp-Ser), and only reduced by half comparatively to the PET grafted with FN.