A CeFeOx catalyst for catalytic oxidation of NO to NO2

Alanine Production by Chemical Upcycling of Polylactic Acid Waste Over Fe-Doped Ru/CeO2

Biodegradable polyesters, such as polylactic acid (PLA), is one of the most promising plastics with great potential to contribute to enabling a sustainable global circular economy. However, the efficient chemical upcycling of PLA plastic waste into high-value chemicals remains a grand challenge. Herein, a series of Ru/CeFeOx catalysts with varying Ru loadings were developed for the catalytic amination of PLA plastic waste to alanine in the presence of ammonia. The as-prepared catalysts exhibited exceptional catalytic activity, high selectivity, and excellent recyclability, achieving an alanine yield of 70.5 % at 180 °C for 18 h, significantly surpassing previous reports. The outstanding catalytic performance can be primarily attributed to the presence of Fe species in Ru/CeFeOx, which generated more oxygen vacancies, provided abundant base sites, and enhanced reducibility, therefore accelerating the reaction rate and enhancing catalytic efficiency. This study presents an alternative strategy for the sustainable chemical upcycling of PLA plastic waste into alanine and the realization of a circular economy.

Mn-based catalysts supported on γ-Al2O3, TiO2 and MCM-41: a comparison for low-temperature NO oxidation with low ratio of O3/NO

Mn-Based catalysts supported on γ-Al2O3, TiO2 and MCM-41 synthesized by an impregnation method were compared to evaluate their NO catalytic oxidation performance with low ratio O3/NO at low temperature (80-200 °C). Activity tests showed that the participation of O3 remarkably promoted the NO oxidation. The catalytic oxidation performance of the three catalysts decreased in the following order: Mn/γ-Al2O3 > Mn/TiO2 > Mn/MCM-41, indicating that Mn/γ-Al2O3 exhibited the best catalytic activity. In addition, there was a clear synergistic effect between Mn/γ-Al2O3 and O3, followed by Mn/TiO2 and O3. The characterization results of XRD, EDS mapping, BET, H2-TPR, XPS and TG showed that Mn/γ-Al2O3 had good manganese dispersion, excellent redox properties, appropriate amounts of coexisting Mn3+ and Mn4+ and abundant chemically adsorbed oxygen, which ensured its good performance. In situ DRIFTS demonstrated the NO adsorption performance on the catalyst surface. As revealed by in situ DRIFTS experiments, the chemically adsorbed oxygen, mainly from the decomposition of O3, greatly promoted the NO adsorption and the formation of nitrates. The Mn-based catalysts showed stronger adsorption strength than the corresponding pure supports. Due to the abundant adsorption sites provided by pure γ-Al2O3, under the interaction of Mn and γ-Al2O3, the Mn/γ-Al2O3 catalyst exhibited the strongest NO adsorption performance among the three catalysts and produced lots of monodentate nitrates (-O-NO2) and bidentate nitrates (-O2NO), which were the vital intermediate species for NO2 formation. Moreover, the NO-TPD studies also demonstrated that Mn/γ-Al2O3 showed the best NO desorption performance among the three catalysts. The good NO adsorption and desorption characteristics of Mn/γ-Al2O3 improved its high catalytic activity. In addition, the activity test results also suggested that Mn/γ-Al2O3 exhibited good SO2 tolerance.

Facet-Dependent Reactivity of Fe2O3/CeO2 Nanocomposites: Effect of Ceria Morphology on CO Oxidation

Ceria has been widely studied either as catalyst itself or support of various active phases in many catalytic reactions, due to its unique redox and surface properties in conjunction to its lower cost, compared to noble metal-based catalytic systems. The rational design of catalytic materials, through appropriate tailoring of the particles’ shape and size, in order to acquire highly efficient nanocatalysts, is of major significance. Iron is considered to be one of the cheapest transition metals while its interaction with ceria support and their shape-dependent catalytic activity has not been fully investigated. In this work, we report on ceria nanostructures morphological effects (cubes, polyhedra, rods) on the textural, structural, surface, redox properties and, consequently, on the CO oxidation performance of the iron-ceria mixed oxides (Fe2O3/CeO2). A full characterization study involving N2 adsorption at –196 °C, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS) was performed. The results clearly revealed the key role of support morphology on the physicochemical properties and the catalytic behavior of the iron-ceria binary system, with the rod-shaped sample exhibiting the highest catalytic performance, both in terms of conversion and specific activity, due to its improved reducibility and oxygen mobility, along with its abundance in Fe2+ species.

Development of cerium-based catalysts for selective catalytic reduction of nitrogen oxides: a review

Nitrogen oxides (NO_X) are major pollutants of the atmosphere, and selective catalytic reduction of nitrogen oxides using ammonia as a reductant (NH₃-SCR) is an effective method to remove nitrogen oxides.

Quantum chemistry study on the oxidation of NO catalyzed by ZSM5 supported Mn/Co–Al/Ce

The detailed mechanism of NO oxidation catalyzed by ZSM5 supported Mn/Co–Al/Ce is investigated and revealed by Quantum Chemistry Calculation. A three-step catalytic mechanism for NO oxidation is proposed and studied. Theoretical results show that, the activate energies of reactions catalyzed by ZSM-5 supported Mn/Co (71.1[Formula: see text]kJ/mol/80.6[Formula: see text]kJ/mol) are much lower than that obtained from the direct NO oxidation. This indicates that the ZSM-5 supported Mn/Co has an obvious catalytic effect. When the active center Si is replaced by Al and Ce, the activation energies are further decreased to about 40[Formula: see text]kJ/mol. This indicates that the doping of Al and Ce can obviously improve the catalytic effect. The theoretical study illustrates that the catalysts for NO oxidation not only relate to the supported transition metal such as Co and Mn, but also highly relate to the activity centers such as Al and Ce.

Catalytic Oxidation of NO over MnOx-CeO₂ and MnOx-TiO₂ Catalysts

A series of MnO_x–CeO₂ and MnO_x–TiO₂ catalysts were prepared by a homogeneous precipitation method and their catalytic activities for the NO oxidation in the absence or presence of SO₂ were evaluated. Results show that the optimal molar ratio of Mn/Ce and Mn/Ti are 0.7 and 0.5, respectively. The MnO_x–CeO₂ catalyst exhibits higher catalytic activity and better resistance to SO₂ poisoning than the MnO_x–TiO₂ catalyst. On the basis of Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), and scanning transmission electron microscope with mapping (STEM-mapping) analyses, it is seen that the MnO_x–CeO₂ catalyst possesses higher BET surface area and better dispersion of MnO_x over the catalyst than MnO_x–TiO₂ catalyst. X-ray photoelectron spectroscopy (XPS) measurements reveal that MnO_x–CeO₂ catalyst provides the abundance of Mn³⁺ and more surface adsorbed oxygen, and SO₂ might be preferentially adsorbed to the surface of CeO₂ to form sulfate species, which provides a protection of MnO_x active sites from being poisoned. In contrast, MnO_x active sites over the MnO_x–TiO₂ catalyst are easily and quickly sulfated, leading to rapid deactivation of the catalyst for NO oxidation. Furthermore, temperature programmed desorption with NO and O₂ (NO + O₂-TPD) and in situ diffuse reflectance infrared transform spectroscopy (in situ DRIFTS) characterizations results show that the MnO_x–CeO₂ catalyst displays much stronger ability to adsorb NO_x than the MnO_x–TiO₂ catalyst, especially after SO₂ poisoning.