Three-dimensional color Doppler for assessing mitral regurgitation during valvuloplasty

[Three-dimensional echocardiography in cardiac surgery. Current status and perspectives]

Three-dimensional (3D) echocardiography is a new imaging technique that can provide useful information about cardiovascular morphology, pathology, and function. Recent refinements in instrumentation, data acquisition, post-processing, and computation speed allow 3D echocardiography to play an important role in cardiac imaging. These modalities provide comprehensive information on ventricular and valve morphology and function. Combined with 3D color Doppler sonography, further assessment of valvular function and determination of flow in the left ventricular outflow tract and cross-septal defects are now possible. Three-dimensional color flow imaging also makes echocardiography accurate for assessing the severity of mitral regurgitation. The purpose of this review is to describe technical developments in 3D echocardiography and its clinical application in cardiac surgery. Moreover, based on clinical studies at our centre, we describe the morphology of the mitral valve, its flow pattern, and function of the mitral annulus.

Comparison of orifice area by transthoracic three-dimensional Doppler echocardiography versus proximal isovelocity surface area (PISA) method for assessment of mitral regurgitation

Effective regurgitant orifice area is a useful index of the severity of mitral regurgitation (MR). The calculation of regurgitant orifice area using the proximal isovelocity surface area (PISA) method has some technical limitations. Three-dimensional reconstruction of the MR jet was performed using the Live 3D system on a Sonos 7500 to measure regurgitant orifice area directly in 109 cases of MR. Regurgitant orifice area was also measured by quantitative 2-dimensional echocardiography and by the PISA method. To analyze the shape of the regurgitant orifice, the ratio of the long axis to the short axis of the orifice (the L/S ratio) was calculated. Regurgitant orifice area on 3-dimensional echocardiography showed an almost identical correlation with that obtained by quantitative echocardiography (r = 0.91, p <0.0001, slope = 0.97) regardless of the L/S ratio. It was also significantly correlated with orifice area obtained using the PISA method (r = 0.93, p <0.0001). However, orifice area on 3-dimensional echocardiography was significantly larger than that obtained using the PISA method in the whole study group and in the 62 cases of MR with L/S ratios >1.5, whereas the correlation was almost identical in cases of MR with L/S ratios < or =1.5. Orifice area obtained using the PISA method also underestimated that obtained by quantitative echocardiography in cases of MR with L/S ratios >1.5. Three-dimensional echocardiography provided robust values independent of the eccentricity of the MR jet or of cardiac rhythm. In conclusion, the direct measurement of the regurgitant orifice area of MR with 3-dimensional Doppler echocardiography could be a promising method to overcome the limitations of the PISA method, especially in cases of MR with elliptic orifice shapes.

Quantitative assessment of in vitro jets based on three-dimensional color Doppler reconstruction

Three-dimensional (3-D) color Doppler imaging of flow jets was performed to investigate the effects of flow rate and orifice size on jet volumes. Flow jets were generated using a flow model to simulate mitral regurgitation. This flow model consisted of a ventricular chamber, a valvular plate and an atrial chamber. Steady flow was driven through circular orifices having diameters of 2.5, 3.5, 4.5, and 6 mm, respectively, with flow rates of 5, 10, 15, 20, and 25 mL/s to form free jets in the atrial chamber. An ATL Ultramark 9 HDI system was used to perform 3-D color Doppler imaging of the flow jets. A transesophageal probe was rotated by a stepper motor to create 3-D color Doppler images of the jets. The color jet volumes for different hemodynamic conditions were measured and then compared with the theoretical predictions. Results showed that the jet volume estimated from the 3-D color Doppler was directly proportional to the flow rate and inversely proportional to the orifice size. The estimated jet volumes correlated well (r > 0.95) with theoretical predictions. This study supports the use of color jet volume as a parameter to quantify mitral regurgitation.

Borderless teleradiology with CHILI

Teleradiology is one of the most evolved areas of telemedicine, but one of the basic problems which remains unsolved concerns system compatibility. The DICOM (Digital Imaging and Communications in Medicine) standard is a prerequisite, but it is not sufficient in all aspects. Examples of other currently open issues are security and cooperative work in synchronous teleconferences. Users without a DICOM radiological workstation would benefit from the ability to join a teleradiology network without any special tools. Drawbacks of many teleradiology systems are that they are monolithic in their software design and cannot be adapted to the actual user's environment. Existing radiological systems currently cannot be extended with additional software components. Consequently, every new application usually needs a new workstation with a different look and feel, which must be connected and integrated into the existing infrastructure. This paper introduces the second generation teleradiology system CHILI. The system has been designed to match both the teleradiology requirements of the American College of Radiology (ACR), and the functionality and usability needs of the users. The experiences of software developers and teleradiology users who participated in the first years of the clinical use of CHILI's predecessor MEDICUS have been integrated into a new design. The system has been designed as a component-based architecture. The most powerful communication protocol for data exchange and teleconferencing is the CHILI protocol, which includes a strong data security concept. The system offers, in addition to its own secure protocol, several different communication Methods: DICOM, classic e-mail, Remote Copy functions (RCP), File Transfer Protocol (FTP), the internet protocols HTTP (HyperText Transfer Protocol) and HTTPS (HyperText Transfer Protocol Secure),and CD-ROMs for off-line communication. These transfer METHODS allow the user to send images to nearly anyone with a computer and a network. The drawbacks of the non-CHILI protocols are that teleconferences are not possible, and that the user must take reasonable precautions for data privacy and security. The CHILI PlugIn mechanism enables the users or third parties to extend the system capabilities by adding powerful image postprocessing functions or interfaces to other information systems. Suitable PlugIns can be either existing programs, or dedicated applications programmed with interfaces to the CHILI components. The developer may freely choose programming languages and interface toolkits. The CHILI architecture is a powerful and flexible environment for Picture Archiving and Communications Systems (PACS)and teleradiology. More than 40 systems are currently running in clinical routine in Germany. More than 300,000 images have been distributed among the communication partners in the last two years. Feedback and suggestions from the users influenced the system architecture by a great extent. The proposed and implemented system has been optimized to be as platform independent, open, and secure as possible.