HIV-1 protease variants from 100-fold drug resistant clinical isolates: expression, purification, and crystallization

Single-Agent and Fixed-Dose Combination HIV-1 Protease Inhibitor Drugs in Fission Yeast (Schizosaccharomyces pombe)

Successful combination antiretroviral therapies (cART) eliminate active replicating HIV-1, slow down disease progression, and prolong lives. However, cART effectiveness could be compromised by the emergence of viral multidrug resistance, suggesting the need for new drug discoveries. The objective of this study was to further demonstrate the utility of the fission yeast cell-based systems that we developed previously for the discovery and testing of HIV protease (PR) inhibitors (PIs) against wild-type or multi-PI drug resistant _M11PR that we isolated from an infected individual. All thirteen FDA-approved single-agent and fixed-dose combination HIV PI drugs were tested. The effect of these drugs on HIV PR activities was tested in pure compounds or formulation drugs. All FDA-approved PI drugs, except for a prodrug FPV, were able to suppress the wild-type PR-induced cellular and enzymatic activities. Relative drug potencies measured by EC₅₀ in fission yeast were discussed in comparison with those measured in human cells. In contrast, none of the FDA-approved drugs suppressed the multi-PI drug resistant _M11PR activities. Results of this study show that fission yeast is a reliable cell-based system for the discovery and testing of HIV PIs and further demonstrate the need for new PI drugs against viral multi-PI resistance.

The L33F darunavir resistance mutation acts as a molecular anchor reducing the flexibility of the HIV-1 protease 30s and 80s loops

HIV-1 protease (PR) is a 99 amino acid protein responsible for proteolytic processing of the viral polyprotein - an essential step in the HIV-1 life cycle. Drug resistance mutations in PR that are selected during antiretroviral therapy lead to reduced efficacy of protease inhibitors (PI) including darunavir (DRV). To identify the structural mechanisms associated with the DRV resistance mutation L33F, we performed X-ray crystallographic studies with a multi-drug resistant HIV-1 protease isolate that contains the L33F mutation (MDR769 L33F). In contrast to other PR L33F DRV complexes, the structure of MDR769 L33F complexed with DRV reported here displays the protease flaps in an open conformation. The L33F mutation increases noncovalent interactions in the hydrophobic pocket of the PR compared to the wild-type (WT) structure. As a result, L33F appears to act as a molecular anchor, reducing the flexibility of the 30s loop (residues 29-35) and the 80s loop (residues 79-84). Molecular anchoring of the 30s and 80s loops leaves an open S1/S1' subsite and distorts the conserved hydrogen-bonding network of DRV. These findings are consistent with previous reports despite structural differences with regards to flap conformation.

A multi-drug resistant HIV-1 protease is resistant to the dimerization inhibitory activity of TLF-PafF

Human immunodeficiency virus type-1 (HIV-1) protease, a homodimeric aspartyl protease, is a critical drug target in designing anti-retroviral drugs to treat HIV/AIDS. Multidrug-resistant (MDR) clinical isolate-769 HIV-1 protease (PDB ID: 3PJ6) has been shown to exhibit expanded active site cavity with wide-open conformation of flaps (Gly48-Gly52) due to the accumulation of multiple mutations. In this study, an HIV-1 protease dimerization inhibitor (PDI)-TLF-PafF, was evaluated against MDR769 HIV-1 protease using X-ray crystallography. It was hypothesized that co-crystallization of MDR769 HIV-1 protease in complex with TLF-PafF would yield either a monomeric or a disrupted dimeric structure. However, crystal structure of MDR769 I10V HIV-1 protease co-crystallized with TLF-PafF revealed an undisrupted dimeric protease structure (PDB ID: 4NKK) that is comparable to the crystal structure of its corresponding apo-protease (PDB ID: 3PJ6). In order to understand the binding profile of TLF-PafF as a PDI, docking analysis was performed using monomeric protease (prepared from the dimeric crystal structure, PDB ID: 4NKK) as docking receptor. Docking analysis revealed that TLF-PafF binds at the N and C termini (dimerization domain) in a clamp shape for the monomeric wild type receptor but not the MDR769 monomeric receptor. TLF-PafF preferentially showed higher binding affinity to the expanded active site cavity of MDR769 HIV-1 protease than to the termini. Irrespective of binding location, the binding affinity of TLF-PafF against wild type receptor (-6.7kcal/mol) was found to be higher compared to its corresponding binding affinity against MDR receptor (-4.6kcal/mol) suggesting that the MDR769 HIV-1 protease could be resistant to the PDI-activity of TLF-PafF, thus supporting the dimeric crystal structure (PDB ID: 4NKK).

Ligand modifications to reduce the relative resistance of multi-drug resistant HIV-1 protease

Proper proteolytic processing of the HIV-1 Gag/Pol polyprotein is required for HIV infection and viral replication. This feature has made HIV-1 protease an attractive target for antiretroviral drug design for the treatment of HIV-1 infected patients. To examine the role of the P1 and P1'positions of the substrate in inhibitory efficacy of multi-drug resistant HIV-1 protease 769 (MDR 769), we performed a series of structure-function studies. Using the original CA/p2 cleavage site sequence, we generated heptapeptides containing one reduced peptide bond with an L to F and A to F double mutation at P1 and P1' (F-r-F), and an A to F at P1' (L-r-F) resulting in P1/P1' modified ligands. Here, we present an analysis of co-crystal structures of CA/p2 F-r-F, and CA/p2 L-r-F in complex with MDR 769. To examine conformational changes in the complex structure, molecular dynamic (MD) simulations were performed with MDR769-ligand complexes. MD trajectories show the isobutyl group of both the lopinavir analog and the CA/p2 L-r-F substrate cause a conformational change of in the active site of MDR 769. IC50 measurements suggest the non identical P1/P1' ligands (CA/p2 L-r-F and lopinavir analog) are more effective against MDR proteases as opposed to identical P1/P1'ligands. Our results suggest that a non identical P1/P1'composition may be more favorable for the inhibition of MDR 769 as they induce conformational changes in the active site of the enzyme resulting in disruption of the two-fold symmetry of the protease, thus, stabilizing the inhibitor in the active site.

Design, synthesis and evaluation of a potent substrate analog inhibitor identified by scanning Ala/Phe mutagenesis, mimicking substrate co-evolution, against multidrug-resistant HIV-1 protease

Multidrug-resistant (MDR) clinical isolate-769, human immunodeficiency virus type-1 (HIV-1) protease (PDB ID: 1TW7), was shown to exhibit wide-open flaps and an expanded active site cavity, causing loss of contacts with protease inhibitors. In the current study, the expanded active site cavity of MDR769 HIV-1 protease was screened with a series of peptide-inhibitors that were designed to mimic the natural substrate cleavage site, capsid/p2. Scanning Ala/Phe chemical mutagenesis approach was incorporated into the design of the peptide series to mimic the substrate co-evolution. Among the peptides synthesized and evaluated, a lead peptide (6a) with potent activity (IC50: 4.4nM) was identified against the MDR769 HIV-1 protease. Isothermal titration calorimetry data showed favorable binding profile for 6a against both wild type and MDR769 HIV-1 protease variants. Nuclear magnetic resonance spectrum of (15)N-labeled MDR769 HIV-1 protease in complex with 6a showed some major perturbations in chemical shift, supporting the peptide induced conformational changes in protease. Modeling analysis revealed multiple contacts between 6a and MDR769 HIV-1 protease. The lead peptide-inhibitor, 6a, with high potency and good binding profile can be used as the basis for developing potent small molecule inhibitors against MDR variants of HIV.

Higher Desolvation Energy Reduces Molecular Recognition in Multi-Drug Resistant HIV-1 Protease

Designing HIV-1 protease inhibitors that overcome drug-resistance is still a challenging task. In this study, four clinical isolates of multi-drug resistant HIV-1 proteases that exhibit resistance to all the US FDA-approved HIV-1 protease inhibitors and also reduce the substrate recognition ability were examined. A multi-drug resistant HIV-1 protease isolate, MDR 769, was co-crystallized with the p2/NC substrate and the mutated CA/p2 substrate, CA/p2 P1'F. Both substrates display different levels of molecular recognition by the wild-type and multi-drug resistant HIV-1 protease. From the crystal structures, only limited differences can be identified between the wild-type and multi-drug resistant protease. Therefore, a wild-type HIV-1 protease and four multi-drug resistant HIV-1 proteases in complex with the two peptides were modeled based on the crystal structures and examined during a 10 ns-molecular dynamics simulation. The simulation results reveal that the multi-drug resistant HIV-1 proteases require higher desolvation energy to form complexes with the peptides. This result suggests that the desolvation of the HIV-1 protease active site is an important step of protease-ligand complex formation as well as drug resistance. Therefore, desolvation energy could be considered as a parameter in the evaluation of future HIV-1 protease inhibitor candidates.

Crystal structures of multidrug-resistant HIV-1 protease in complex with two potent anti-malarial compounds

Two potent inhibitors (compounds 1 and 2) of malarial aspartyl protease, plasmepsin-II, were evaluated against wild type (NL4-3) and multidrug-resistant clinical isolate 769 (MDR) variants of human immunodeficiency virus type-1 (HIV-1) aspartyl protease. Enzyme inhibition assays showed that both 1 and 2 have better potency against NL4-3 than against MDR protease. Crystal structures of MDR protease in complex with 1 and 2 were solved and analyzed. Crystallographic analysis revealed that the MDR protease exhibits a typical wide-open conformation of the flaps (Gly48 to Gly52) causing an overall expansion in the active site cavity, which, in turn caused unstable binding of the inhibitors. Due to the expansion of the active site cavity, both compounds showed loss of direct contacts with the MDR protease compared to the docking models of NL4-3. Multiple water molecules showed a rich network of hydrogen bonds contributing to the stability of the ligand binding in the distorted binding pockets of the MDR protease in both crystal structures. Docking analysis of 1 and 2 showed a decrease in the binding affinity for both compounds against MDR supporting our structure-function studies. Thus, compounds 1 and 2 show promising inhibitory activity against HIV-1 protease variants and hence are good candidates for further development to enhance their potency against NL4-3 as well as MDR HIV-1 protease variants.

The higher barrier of darunavir and tipranavir resistance for HIV-1 protease

Darunavir and tipranavir are two inhibitors that are active against multi-drug resistant (MDR) HIV-1 protease variants. In this study, the invitro inhibitory efficacy was tested against a MDR HIV-1 protease variant, MDR 769 82T, containing the drug resistance mutations of 46L/54V/82T/84V/90M. Crystallographic and enzymatic studies were performed to examine the mechanism of resistance and the relative maintenance of potency. The key findings are as follows: (i) The MDR protease exhibits decreased susceptibility to all nine HIV-1 protease inhibitors approved by the US Food and Drug Administration (FDA), among which darunavir and tipranavir are the most potent; (ii) the threonine 82 mutation on the protease greatly enhances drug resistance by altering the hydrophobicity of the binding pocket; (iii) darunavir or tipranavir binding facilitates closure of the wide-open flaps of the MDR protease; and (iv) the remaining potency of tipranavir may be preserved by stabilizing the flaps in the inhibitor-protease complex while darunavir maintains its potency by preserving protein main chain hydrogen bonds with the flexible P2 group. These results could provide new insights into drug design strategies to overcome multi-drug resistance of HIV-1 protease variants.

Nine crystal structures determine the substrate envelope of the MDR HIV-1 protease

Under drug selection pressure, emerging mutations render HIV-1 protease drug resistant, leading to the therapy failure in anti-HIV treatment. It is known that nine substrate cleavage site peptides bind to wild type (WT) HIV-1 protease in a conserved pattern. However, how the multidrug-resistant (MDR) HIV-1 protease binds to the substrate cleavage site peptides is yet to be determined. MDR769 HIV-1 protease (resistant mutations at residues 10, 36, 46, 54, 62, 63, 71, 82, 84, and 90) was selected for present study to understand the binding to its natural substrates. MDR769 HIV-1 protease was co-crystallized with nine substrate cleavage site hepta-peptides. Crystallographic studies show that MDR769 HIV-1 protease has an expanded substrate envelope with wide open flaps. Furthermore, ligand binding energy calculations indicate weaker binding in MDR769 HIV-1 protease-substrate complexes. These results help in designing the next generation of HIV-1 protease inhibitors by targeting the MDR HIV-1 protease.

Contribution of the 80s loop of HIV-1 protease to the multidrug-resistance mechanism: crystallographic study of MDR769 HIV-1 protease variants

The flexible flaps and the 80s loops (Pro79-Ile84) of HIV-1 protease are crucial in inhibitor binding. Previously, it was reported that the crystal structure of multidrug-resistant 769 (MDR769) HIV-1 protease shows a wide-open conformation of the flaps owing to conformational rigidity acquired by the accumulation of mutations. In the current study, the effect of mutations on the conformation of the 80s loop of MDR769 HIV-1 protease variants is reported. Alternate conformations of Pro81 (proline switch) with a root-mean-square deviation of 3-4.8 Å in the C(α) atoms of the I10V mutant and a side chain with a `flipped-out' conformation in the A82F mutant cause distortion in the S1/S1' binding pockets that affects inhibitor binding. The A82S and A82T mutants show local changes in the electrostatics of inhibitor binding owing to the mutation from nonpolar to polar residues. In summary, the crystallographic studies of four variants of MDR769 HIV-1 protease presented in this article provide new insights towards understanding the drug-resistance mechanism as well as a basis for design of future protease inhibitors with enhanced potency.

Subtype polymorphisms among HIV-1 protease variants confer altered flap conformations and flexibility

Human immunodeficiency virus type 1 (HIV-1) protease plays a fundamental role in the maturation and life cycle of the retrovirus HIV-1, as it functions in regulating post-translational processing of the viral polyproteins gag and gag-pol; thus, it is a key target of AIDS antiviral therapy. Accessibility of substrate to the active site is mediated by two flaps, which must undergo a large conformational change from an open to a closed conformation during substrate binding and catalysis. The electron paramagnetic resonance (EPR) method of site-directed spin labeling (SDSL) with double electron-electron resonance (DEER) spectroscopy was utilized to monitor the conformations of the flaps in apo HIV-1 protease (HIV-1PR), subtypes B, C, and F, CRF01_A/E, and patient isolates V6 and MDR 769. The distance distribution profiles obtained from analysis of the dipolar modulated echo curves were reconstructed to yield a set of Gaussian-shaped populations, which provide an analysis of the flap conformations sampled. The relative percentages of each conformer population described as "tucked/curled", "closed", "semi-open", and "wide-open" were determined and compared for various constructs. The results and analyses show that sequence variations among subtypes, CRFs, and patient isolates of apo HIV-1PR alter the average flap conformation in a way that can be understood as inducing shifts in the relative populations, or conformational sampling, of the previously described four conformations for HIV-1PR.

HIV protease-activated molecular switches based on beta-glucuronidase and alkaline phosphatase

Our long-term goal is to direct the evolution of novel protease variants. To this end we have engineered a new type of protease-activated reporter enzyme. Many protease-activated enzymes evolved in nature, but the introduction of novel regulatory mechanisms into normally unregulated enzymes poses a difficult design challenge. Random Elongation Mutagenesis [1] was used to fuse the p6 peptide, which is recognized and cleaved by HIV protease, and twelve random sequence amino acids to the C-termini of beta-glucuronidase (GUS) and alkaline phosphatase (AP). The resulting GUS-p6-(NNN)12 and AP-p6-(NNN)12 libraries were expressed in E. coli and screened for clones that were inactivated by the C-terminal extension (tail). The inactivated clones were co-expressed with HIV protease, and those that were re-activated were isolated. The AP and GUS activities of the most responsive clones were each >3.5-fold higher when co-expressed with HIV protease, and this activation is correlated with in vivo proteolysis. It should be possible to generalize this strategy to different reporter enzymes, different target proteases, and perhaps to other types of protein-modifying enzymes.

Mechanism of drug resistance revealed by the crystal structure of the unliganded HIV-1 protease with F53L mutation

Mutations in HIV-1 protease (PR) that produce resistance to antiviral PR inhibitors are a major problem in AIDS therapy. The mutation F53L arising from antiretroviral therapy was introduced into the flexible flap region of the wild-type PR to study its effect and potential role in developing drug resistance. Compared to wild-type PR, PR(F53L) showed lower (15%) catalytic efficiency, 20-fold weaker inhibition by the clinical drug indinavir, and reduced dimer stability, while the inhibition constants of two peptide analog inhibitors were slightly lower than those for PR. The crystal structure of PR(F53L) was determined in the unliganded form at 1.35 Angstrom resolution in space group P4(1)2(1)2. The tips of the flaps in PR(F53L) had a wider separation than in unliganded wild-type PR, probably due to the absence of hydrophobic interactions of the side-chains of Phe53 and Ile50'. The changes in interactions between the flaps agreed with the reduced stability of PR(F53L) relative to wild-type PR. The altered flap interactions in the unliganded form of PR(F53L) suggest a distinct mechanism for drug resistance, which has not been observed in other common drug-resistant mutants.

"Wide-open" 1.3 A structure of a multidrug-resistant HIV-1 protease as a drug target

This report examines structural changes in a highly mutated, clinical multidrug-resistant HIV-1 protease, and the crystal structure has been solved to 1.3 A resolution in the absence of any inhibitor. This protease variant contains codon mutations at positions 10, 36, 46, 54, 62, 63, 71, 82, 84, and 90 that confer resistance to protease inhibitors. Major differences between the wild-type and the variant include a structural change initiated by the M36V mutation and amplified by additional mutations in the flaps of the protease, resulting in a "wide-open" structure that represents an opening that is 8 A wider than the "open" structure of the wild-type protease. A second structural change is triggered by the L90M mutation that results in reshaping the 23-32 segment. A third key structural change of the protease is due to the mutations from longer to shorter amino acid side chains at positions 82 and 84.

Diversification and specialization of HIV protease function during in vitro evolution

Our goal is to understand how enzymes adapt to utilize novel substrates. We and others have shown that directed evolution tends to generate enzyme variants with broadened substrate specificity. Broad-specificity enzymes are generally deleterious to living cells, so this observed trend might be an artifact of the most commonly employed high throughput screens. Here, we demonstrate a more natural and effective screening strategy for directed evolution. The gene encoding model enzyme HIV protease was randomly mutated, and the resulting library was expressed in Escherichia coli cells to eliminate cytotoxic broad-specificity variants. The surviving variants were screened for clones with activity against a reporter enzyme. The wild-type human immunodeficiency virus type I protease (HIV PR) is cytotoxic and exhibits no detectable activity in reactions with beta-galactosidase (BGAL). In contrast, the selected variants were nontoxic and exhibited greater activity and specificity against BGAL than did the wild-type HIV PR in reactions with any substrate. A single round of whole gene random mutagenesis and conventional high-throughput screening does not usually effect complete inversions of substrate specificity. This suggests that a combination of positive and purifying selection engenders more rapid adaptation than positive selection alone.

Structural insights into the mechanisms of drug resistance in HIV-1 protease NL4-3

The development of resistance to anti-retroviral drugs targeted against HIV is an increasing clinical problem in the treatment of HIV-1-infected individuals. Many patients develop drug-resistant strains of the virus after treatment with inhibitor cocktails (HAART therapy), which include multiple protease inhibitors. Therefore, it is imperative that we understand the mechanisms by which the viral proteins, in particular HIV-1 protease, develop resistance. We have determined the three-dimensional structure of HIV-1 protease NL4-3 in complex with the potent protease inhibitor TL-3 at 2.0 A resolution. We have also obtained the crystal structures of three mutant forms of NL4-3 protease containing one (V82A), three (V82A, M46I, F53L) and six (V82A, M46I, F53L, V77I, L24I, L63P) point mutations in complex with TL-3. The three protease mutants arose sequentially under ex vivo selective pressure in the presence of TL-3, and exhibit fourfold, 11-fold, and 30-fold resistance to TL-3, respectively. This series of protease crystal structures offers insights into the biochemical and structural mechanisms by which the enzyme can overcome inhibition by TL-3 while recovering some of its native catalytic activity.

Rational design of p53, an intrinsically unstructured protein, for the fabrication of novel molecular sensors

The dominant paradigm of protein engineering is structure-based site-directed mutagenesis. This rational approach is generally more effective for the engineering of local properties, such as substrate specificity, than global ones such as allostery. Previous workers have modified normally unregulated reporter enzymes, including beta-galactosidase, alkaline phosphatase, and beta-lactamase, so that the engineered versions are activated (up to 4-fold) by monoclonal antibodies. A reporter that could easily be "reprogrammed" for the facile detection of novel effectors (binding or modifying activities) would be useful in high throughput screens for directed evolution or drug discovery. Here we describe a straightforward and general solution to this potentially difficult design problem. The transcription factor p53 is normally regulated by a variety of post-translational modifications. The insertion of peptides into intrinsically unstructured domains of p53 generated variants that were activated up to 100-fold by novel effectors (proteases or antibodies). An engineered p53 was incorporated into an existing high throughput screen for the detection of human immunodeficiency virus protease, an arbitrarily chosen novel effector. These results suggest that the molecular recognition properties of intrinsically unstructured proteins are relatively easy to engineer and that the absence of crystal structures should not deter the rational engineering of this class of proteins.

Crystal structures of a multidrug-resistant human immunodeficiency virus type 1 protease reveal an expanded active-site cavity

The goal of this study was to use X-ray crystallography to investigate the structural basis of resistance to human immunodeficiency virus type 1 (HIV-1) protease inhibitors. We overexpressed, purified, and crystallized a multidrug-resistant (MDR) HIV-1 protease enzyme derived from a patient failing on several protease inhibitor-containing regimens. This HIV-1 variant contained codon mutations at positions 10, 36, 46, 54, 63, 71, 82, 84, and 90 that confer drug resistance to protease inhibitors. The 1.8-angstrom (A) crystal structure of this MDR patient isolate reveals an expanded active-site cavity. The active-site expansion includes position 82 and 84 mutations due to the alterations in the amino acid side chains from longer to shorter (e.g., V82A and I84V). The MDR isolate 769 protease "flaps" stay open wider, and the difference in the flap tip distances in the MDR 769 variant is 12 A. The MDR 769 protease crystal complexes with lopinavir and DMP450 reveal completely different binding modes. The network of interactions between the ligands and the MDR 769 protease is completely different from that seen with the wild-type protease-ligand complexes. The water molecule-forming hydrogen bonds bridging between the two flaps and either the substrate or the peptide-based inhibitor are lacking in the MDR 769 clinical isolate. The S1, S1', S3, and S3' pockets show expansion and conformational change. Surface plasmon resonance measurements with the MDR 769 protease indicate higher k(off) rates, resulting in a change of binding affinity. Surface plasmon resonance measurements provide k(on) and k(off) data (K(d) = k(off)/k(on)) to measure binding of the multidrug-resistant protease to various ligands. This MDR 769 protease represents a new antiviral target, presenting the possibility of designing novel inhibitors with activity against the open and expanded protease forms.