Solution Structure of a Substrate for the Archaeal Pre-tRNA Splicing Endonucleases: The Bulge-Helix-Bulge Motif

Acylation probing of "generic" RNA libraries reveals critical influence of loop constraints on reactivity

The reactivity of RNA 2'-OH acylation is broadly useful both in probing structure and in preparing conjugates. To date, this reactivity has been analyzed in limited sets of biological RNA sequences, leaving open questions of how reactivity varies inherently without regard to sequence in structured contexts. We constructed and probed "generic" structured RNA libraries using homogeneous loop sequences, employing deep sequencing to carry out a systematic survey of reactivity. We find a wide range of RNA reactivities among single-stranded sequences, with nearest neighbors playing substantial roles. Remarkably, certain small loops are found to be far more reactive on average (up to 4,000-fold) than single-stranded RNAs, due to conformational constraints that enhance reactivity. Among loops, we observe large variations in reactivity based on size, type, and position. The results lend insights into RNA designs for achieving high-efficiency local conjugation and provide new opportunities to refine structure analysis.

The distribution, diversity, and importance of 16S rRNA gene introns in the order Thermoproteales

Background

Intron sequences are common in 16S rRNA genes of specific thermophilic lineages of Archaea, specifically the Thermoproteales (phylum Crenarchaeota). Environmental sequencing (16S rRNA gene and metagenome) from geothermal habitats in Yellowstone National Park (YNP) has expanded the available datasets for investigating 16S rRNA gene introns. The objectives of this study were to characterize and curate archaeal 16S rRNA gene introns from high-temperature habitats, evaluate the conservation and distribution of archaeal 16S rRNA introns in geothermal systems, and determine which “universal” archaeal 16S rRNA gene primers are impacted by the presence of intron sequences.

Results

Several new introns were identified and their insertion loci were constrained to thirteen locations across the 16S rRNA gene. Many of these introns encode homing endonucleases, although some introns were short or partial sequences. Pyrobaculum, Thermoproteus, and Caldivirga 16S rRNA genes contained the most abundant and diverse intron sequences. Phylogenetic analysis of introns revealed that sequences within the same locus are distributed biogeographically. The most diverse set of introns were observed in a high-temperature, circumneutral (pH 6) sulfur sediment environment, which also contained the greatest diversity of different Thermoproteales phylotypes.

Conclusions

The widespread presence of introns in the Thermoproteales indicates a high probability of misalignments using different “universal” 16S rRNA primers employed in environmental microbial community analysis.

Reviewers

This article was reviewed by Dr. Eugene Koonin and Dr. W. Ford Doolittle.

Electronic supplementary material

The online version of this article (doi:10.1186/s13062-015-0065-6) contains supplementary material, which is available to authorized users.

Circularly permuted tRNA genes: their expression and implications for their physiological relevance and development

A number of genome analyses and searches using programs that focus on the RNA-specific bulge-helix-bulge (BHB) motif have uncovered a wide variety of disrupted tRNA genes. The results of these analyses have shown that genetic information encoding functional RNAs is described in the genome cryptically and is retrieved using various strategies. One such strategy is represented by circularly permuted tRNA genes, in which the sequences encoding the 5′-half and 3′-half of the specific tRNA are separated and inverted on the genome. Biochemical analyses have defined a processing pathway in which the termini of tRNA precursors (pre-tRNAs) are ligated to form a characteristic circular RNA intermediate, which is then cleaved at the acceptor-stem to generate the typical cloverleaf structure with functional termini. The sequences adjacent to the processing site located between the 3′-half and the 5′-half of pre-tRNAs potentially form a BHB motif, which is the dominant recognition site for the tRNA-intron splicing endonuclease, suggesting that circularization of pre-tRNAs depends on the splicing machinery. Some permuted tRNAs contain a BHB-mediated intron in their 5′- or 3′-half, meaning that removal of an intron, as well as swapping of the 5′- and 3′-halves, are required during maturation of their pre-tRNAs. To date, 34 permuted tRNA genes have been identified from six species of unicellular algae and one archaeon. Although their physiological significance and mechanism of development remain unclear, the splicing system of BHB motifs seems to have played a key role in the formation of permuted tRNA genes. In this review, current knowledge of circularly permuted tRNA genes is presented and some unanswered questions regarding these species are discussed.

Coarse grained models reveal essential contributions of topological constraints to the conformational free energy of RNA bulges

Recent studies have shown that simple stereochemical constraints encoded at the RNA secondary structure level significantly restrict the orientation of RNA helices across two-way junctions and yield physically reasonable distributions of RNA 3D conformations. Here we develop a new coarse-grain model, TOPRNA, that is optimized for exploring detailed aspects of these topological constraints in complex RNA systems. Unlike prior models, TOPRNA effectively treats RNAs as collections of semirigid helices linked by freely rotatable single strands, allowing us to isolate the effects of secondary structure connectivity and sterics on 3D structure. Simulations of bulge junctions show that TOPRNA captures new aspects of topological constraints, including variations arising from deviations in local A-form structure, translational displacements of the helices, and stereochemical constraints imposed by bulge-linker nucleotides. Notably, these aspects of topological constraints define free energy landscapes that coincide with the distribution of bulge conformations in the PDB. Our simulations also quantitatively reproduce NMR RDC measurements made on HIV-1 TAR at low salt concentrations, although not for different TAR mutants or at high salt concentrations. Our results confirm that topological constraints are an important determinant of bulge conformation and dynamics and demonstrate the utility of TOPRNA for studying the topological constraints of complex RNAs.

Highly efficient, in vivo optimized, archaeal endonuclease for controlled RNA splicing in mammalian cells

ARCHAEA-ExPRESs is an mRNA modification technology that makes use of components derived from the Archaeon Methanocaldococcus jannaschii, namely the tRNA splicing endonuclease (MJ-EndA) and its natural substrate, the bulge-helix-bulge (BHB) structure (1). These components can perform both cis- and trans-splicing in cellular and animal models and may provide a convenient way to modulate gene expression using components independent of cellular regulatory networks. To use MJ-EndA in stable expression mammalian systems, we developed variants characterized by high efficiency and sustainable in vivo activity. The MJ-EndA variants were created by the introduction of proper localization signals followed by mutagenesis and direct selection in mammalian cells. Of note, enzyme selection used an in vivo selection method based on puromycin resistance conferred to cells by BHB-mediated intron splicing from an out-of-frame puromycin N-acetyl transferase (PAC) gene. This approach yielded several endonuclease variants, the best of which showed 40-fold higher activity compared to the parental enzyme and stable processing of 30% of the target mRNA. Notably, these variants showed complete compatibility with long-term expression in mammalian cells, suggesting that they may be usefully applied in functional genomics and genetically modified animal models.

New insights into the fundamental role of topological constraints as a determinant of two-way junction conformation

Recent studies have shown that topological constraints encoded at the RNA secondary structure level involving basic steric and stereochemical forces can significantly restrict the orientations sampled by helices across two-way RNA junctions. Here, we formulate these topological constraints in greater quantitative detail and use this topological framework to rationalize long-standing but poorly understood observations regarding the basic behavior of RNA two-way junctions. Notably, we show that the asymmetric nature of the A-form helix and the finite length of a bulge provide a physical basis for the experimentally observed directionality and bulge-length amplitude dependence of bulge induced inter-helical bends. We also find that the topologically allowed space can be modulated by variations in sequence, particularly with the addition of non-canonical GU base pairs at the junction, and, surprisingly, by the length of the 5′ and 3′ helices. A survey of two-way RNA junctions in the protein data bank confirms that junction residues have a strong preference to adopt looped-in, non-canonically base-paired conformations, providing a route for extending our bulge-directed framework to internal loop motifs and implying a simplified link between secondary and tertiary structure. Finally, our results uncover a new simple mechanism for coupling junction-induced topological constraints with tertiary interactions.

Solution structure of the K-turn and Specifier Loop domains from the Bacillus subtilis tyrS T-box leader RNA

In Gram-positive bacteria, the RNA transcripts of many amino acid biosynthetic and aminoacyl tRNA synthetase genes contain 5' untranslated regions, or leader RNAs, that function as riboswitches. These T-box riboswitches bind cognate tRNA molecules and regulate gene expression by a transcription attenuation mechanism. The Specifier Loop domain of the leader RNA contains nucleotides that pair with nucleotides in the tRNA anticodon loop and is flanked on one side by a kink-turn (K-turn), or GA, sequence motif. We have determined the solution NMR structure of the K-turn sequence element within the context of the Specifier Loop domain. The K-turn sequence motif has several noncanonical base pairs typical of K-turn structures but adopts an extended conformation. The Specifier Loop domain contains a loop E structural motif, and the single-strand Specifier nucleotides stack with their Watson-Crick edges displaced toward the minor groove. Mg(2+) leads to a significant bending of the helix axis at the base of the Specifier Loop domain, but does not alter the K-turn. Isothermal titration calorimetry indicates that the K-turn sequence causes a small enhancement of the interaction between the tRNA anticodon arm and the Specifier Loop domain. One possibility is that the K-turn structure is formed and stabilized when tRNA binds the T-box riboswitch and interacts with Stem I and the antiterminator helix. This motif in turn anchors the orientation of Stem I relative to the 3' half of the leader RNA, further stabilizing the tRNA-T box complex.

Large-scale tRNA intron transposition in the archaeal order Thermoproteales represents a novel mechanism of intron gain

Recently, diverse arrangements of transfer RNA (tRNA) genes have been found in the domain Archaea, in which the tRNA is interrupted by a maximum of three introns or is even fragmented into two or three genes. Whereas most of the eukaryotic tRNA introns are inserted strictly at the canonical nucleotide position (37/38), archaeal intron-containing tRNAs have a wide diversity of small tRNA introns, which differ in their numbers and locations. This feature is especially pronounced in the archaeal order Thermoproteales. In this study, we performed a comprehensive sequence comparison of 286 tRNA introns and their genes in seven Thermoproteales species to clarify how these introns have emerged and diversified during tRNA gene evolution. We identified 46 intron groups containing sets of highly similar sequences (>70%) and showed that 16 of them contain sequences from evolutionarily distinct tRNA genes. The phylogeny of these 16 intron groups indicates that transposition events have occurred at least seven times throughout the evolution of Thermoproteales. These findings suggest that frequent intron transposition occurs among the tRNA genes of Thermoproteales. Further computational analysis revealed limited insertion positions and corresponding amino acid types of tRNA genes. This has arisen because the bulge-helix-bulge splicing motif is required at the newly transposed position if the pre-tRNA is to be correctly processed. These results clearly demonstrate a newly identified mechanism that facilitates the late gain of short introns at various noncanonical positions in archaeal tRNAs.

ARCHAEA-ExPRESs targeting of alpha-tubulin 4 mRNA: a model for high-specificity trans-splicing

Effectiveness of trans-splicing-mediated mRNA reprogramming depends on specificity and efficiency. We have previously developed a new strategy (ARCHAEA-ExPRESs) that uses a tRNA endonuclease derived from Archaea and its natural substrate, the bulge-helix-bulge (BHB) structure. ARCHAEA-ExPRESs provides increased specificity in functional targeting. In fact, this system is based on a double check, the base pairing and the formation of a BHB structure between the target mRNA and the targeting RNA. In this study, we demonstrate the high specificity of ARCHAEA-ExPRESs by tagging the endogenous alpha-tubulin 4 via trans-splicing. Alpha-tubulin 4 belongs to a gene family sharing high degree of nucleotide sequence homology. The formation of a perfect BHB structure between targeting RNAs and the isotype alpha-tubulin 4 enables selective trans-splicing. Most important, ARCHAEA-ExPRESs functionality is conserved in vivo following transient expression of archaeal tRNA endonuclease in mouse liver. Production of the recombinant protein is strictly dependent on the expression of the archaeal endonuclease, and the efficiency of the system depends on the relative amount of the target and targeting mRNAs. These data prove the effectiveness of ARCHAEA-ExPRESs in an endogenous highly demanding context and disclose the possibility to utilize this system in a variety of technological or therapeutic applications.

Disrupted tRNA gene diversity and possible evolutionary scenarios

The following unusual tRNAs have recently been discovered in the genomes of Archaea and primitive Eukaryota: multiple-intron-containing tRNAs, which have more than one intron; split tRNAs, which are produced from two pieces of RNA transcribed from separate genes; tri-split tRNAs, which are produced from three separate genes; and permuted tRNA, in which the 5' and 3' halves are encoded with permuted orientations within a single gene. All these disrupted tRNA genes can form mature contiguous tRNA, which is aminoacylated after processing by cis or trans splicing. The discovery of such tRNA disruptions has raised the question of when and why these complex tRNA processing pathways emerged during the evolution of life. Many previous reports have noted that tRNA genes contain a single intron in the anticodon loop region, a feature common throughout all three domains of life, suggesting an ancient trait of the last universal common ancestor. In this context, these unique tRNA disruptions recently found only in Archaea and primitive Eukaryota provide new insight into the origin and evolution of tRNA genes, encouraging further research in this field. In this paper, we summarize the phylogeny, structure, and processing machinery of all known types of disrupted tRNAs and discuss possible evolutionary scenarios for these tRNA genes.

Probing the catalytic triad of an archaeal RNA splicing endonuclease

Among the four known mechanisms of intron removal, three are reputedly catalyzed by RNA molecules. In the fourth mechanism, a protein endonuclease removes introns from nuclear tRNA and all archaeal RNAs. Three strictly conserved residues of the splicing endonuclease, a histidine, a lysine, and a tyrosine, were predicted to catalyze the intron cleavage reaction in a manner similar to that of the catalytic triad of ribonuclease A. Single-turnover kinetic parameters were obtained for the wild-type enzyme and two triad mutants. Mutation of histidine to alanine produced an at least approximately 28-fold reduction; mutation of tyrosine to phenylalanine produced an at least approximately 7-fold reduction in activity, while a histidine and tyrosine double mutation abolished cleavage. The single mutation of lysine to glutamic acid abolished RNA cleavage activity in the absence of a divalent metal but maintained a substantial level of activity in the presence of specific divalent metals. These data support important functional roles already proposed for the catalytic triad and suggest an intriguing hypothesis in which the splicing endonuclease is an intermediate in the transition from the RNA to the RNP world.

Comprehensive analysis of archaeal tRNA genes reveals rapid increase of tRNA introns in the order thermoproteales

The analysis of archaeal tRNA genes is becoming more important to evaluate the origin and evolution of tRNA molecule. Even with the recent accumulation of complete genomes of numerous archaeal species, several tRNA genes are still required for a full complement of the codon table. We conducted comprehensive screening of tRNA genes from 47 archaeal genomes by using a combination of different types of tRNA prediction programs and extracted a total of 2,143 reliable tRNA gene candidates including 437 intron-containing tRNA genes, which covered more than 99.9% of the codon tables in Archaea. Previously, the content of intron-containing tRNA genes in Archaea was estimated to be approximately 15% of the whole tRNA genes, and most of the introns were known to be located at canonical positions (nucleotide position between 37 and 38) of precursor tRNA (pre-tRNA). Surprisingly, we observed marked enrichment of tRNA introns in five species of the archaeal order Thermoproteales; about 70% of tRNA gene candidates were found to be intron-containing tRNA genes, half of which contained multiple introns, and the introns were located at various noncanonical positions. Sequence similarity analysis revealed that approximately half of the tRNA introns found at Thermoproteales-specific intron locations were highly conserved among several tRNA genes. Intriguingly, identical tRNA intron sequences were found within different types of tRNA genes that completely lacked exon sequence similarity, suggesting that the tRNA introns in Thermoproteales could have been gained via intron insertion events at a later stage of tRNA evolution. Moreover, although the CCA sequence at the 3' terminal of pre-tRNA is added by a CCA-adding enzyme after gene transcription in Archaea, most of the tRNA genes containing highly conserved introns already encode the CCA sequence at their 3' terminal. Based on these results, we propose possible models explaining the rapid increase of tRNA introns as a result of intron insertion events via retrotransposition of pre-tRNAs. The sequences and secondary structures of the tRNA genes and their bulge-helix-bulge motifs were registered in SPLITSdb (http://splits.iab.keio.ac.jp/splitsdb/), a novel and comprehensive database for archaeal tRNA genes.

Structural determinants characteristic to AARS subclasses and tRNA-splicing endonuclease in eukaryotes

We compare and analyse the whole set of cytoplasmic, nonorganellar transfer RNA genes from 22 eukaryal genomes. Grouping this whole set into sets of isoacceptors we have elucidated structural elements that are characteristic to individual isoacceptor tRNAs within the subclasses of aminoacyl tRNA synthetases. Further, we have observed structural motifs straddling the exon-intron boundaries, which includes selective occurrence of both symmetric- 3-4-3 and asymmetric-3-4-(4, 5) bulge-helix-bulge-like structural motifs. Among all the tRNA isoacceptors, Ile, Leu, Ser, Pro, Met, Arg, and Tyr harbor BHB-like secondary structures at exon-intron boundaries. The structural signatories at the exon-intron boundaries appear to contribute to the specificity of splice site recognition.

Transfer RNA genes in pieces

The short genes encoding transfer RNA (tRNA) molecules are highly conserved in both sequence and structure, reflecting the central role of tRNA in protein biosynthesis. The frequent occurrence of fragmented intron-containing tRNAs that require processing to form contiguous molecules is therefore surprising. Recent discoveries of permuted and split tRNA genes have added to the apparent creativity of nature regarding the organization of these fragmented genes. Here, we provide an overview of the various types of fragmented tRNA genes and examine the hypothesis that the integration of mobile genetic elements--including viruses and plasmids--established such genes in pieces.

Sequence evidence in the archaeal genomes that tRNAs emerged through the combination of ancestral genes as 5' and 3' tRNA halves

The discovery of separate 5′ and 3′ halves of transfer RNA (tRNA) molecules—so-called split tRNA—in the archaeal parasite Nanoarchaeum equitans made us wonder whether ancestral tRNA was encoded on 1 or 2 genes. We performed a comprehensive phylogenetic analysis of tRNAs in 45 archaeal species to explore the relationship between the three types of tRNAs (nonintronic, intronic and split). We classified 1953 mature tRNA sequences into 22 clusters. All split tRNAs have shown phylogenetic relationships with other tRNAs possessing the same anticodon. We also mimicked split tRNA by artificially separating the tRNA sequences of 7 primitive archaeal species at the anticodon and analyzed the sequence similarity and diversity of the 5′ and 3′ tRNA halves. Network analysis revealed specific characteristics of and topological differences between the 5′ and 3′ tRNA halves: the 5′ half sequences were categorized into 6 distinct groups with a sequence similarity of >80%, while the 3′ half sequences were categorized into 9 groups with a higher sequence similarity of >88%, suggesting different evolutionary backgrounds of the 2 halves. Furthermore, the combinations of 5′ and 3′ halves corresponded with the variation of amino acids in the codon table. We found not only universally conserved combinations of 5′–3′ tRNA halves in tRNA^iMet, tRNA^Thr, tRNA^Ile, tRNA^Gly, tRNA^Gln, tRNA^Glu, tRNA^Asp, tRNA^Lys, tRNA^Arg and tRNA^Leu but also phylum-specific combinations in tRNA^Pro, tRNA^Ala, and tRNA^Trp. Our results support the idea that tRNA emerged through the combination of separate genes and explain the sequence diversity that arose during archaeal tRNA evolution.

Structural and mutational analysis of tRNA intron-splicing endonuclease from Thermoplasma acidophilum DSM 1728: catalytic mechanism of tRNA intron-splicing endonucleases

In archaea, RNA endonucleases that act specifically on RNA with bulge-helix-bulge motifs play the main role in the recognition and excision of introns, while the eukaryal enzymes use a measuring mechanism to determine the positions of the universally positioned splice sites relative to the conserved domain of pre-tRNA. Two crystallographic structures of tRNA intron-splicing endonuclease from Thermoplasma acidophilum DSM 1728 (EndA(Ta)) have been solved to 2.5-A and 2.7-A resolution by molecular replacement, using the 2.7-A resolution data as the initial model and the single-wavelength anomalous-dispersion phasing method using selenomethionine as anomalous signals, respectively. The models show that EndA(Ta) is a homodimer and that it has overall folding similar to that of other archaeal tRNA endonucleases. From structural and mutational analyses of H236A, Y229F, and K265I in vitro, we have demonstrated that they play critical roles in recognizing the splice site and in cleaving the pre-tRNA substrate.

Three-dimensional structure determined for a subunit of human tRNA splicing endonuclease (Sen15) reveals a novel dimeric fold

Splicing of eukaryal intron-containing tRNAs requires the action of the heterotetrameric splicing endonuclease, which is composed of two catalytic subunits, Sen34 and Sen2, and two structural subunits, Sen15 and Sen54. Here we report the solution structure of the human tRNA splicing endonuclease subunit HsSen15. To facilitate the structure determination, we removed the disordered 35 N-terminal and 14 C-terminal residues of the full-length protein to produce HsSen15(36-157). The structure of HsSen15(36-157), the first for a subunit of a eukaryal splicing endonuclease, revealed that the protein possesses a novel homodimeric fold. Each monomer consists of three alpha-helices and a mixed antiparallel/parallel beta-sheet, arranged in a topology similar to that of the C-terminal domain of Methanocaldococcus jannaschii endonuclease. The dimeric interface is dominated by a beta-barrel structure, formed by face-to-face packing of two, three-stranded beta-sheets. Each of the beta-sheets results from reciprocal parallel pairing of one beta-strand from one subunit with two other beta-strands from the symmetric subunit. The structural model provides insights into the functional assembly of the human tRNA splicing endonuclease.

RNA recognition and cleavage by a splicing endonuclease

The RNA splicing endonuclease cleaves two phosphodiester bonds within folded precursor RNAs during intron removal, producing the functional RNAs required for protein synthesis. Here we describe at a resolution of 2.85 angstroms the structure of a splicing endonuclease from Archaeglobus fulgidus bound with a bulge-helix-bulge RNA containing a noncleaved and a cleaved splice site. The endonuclease dimer cooperatively recognized a flipped-out bulge base and stabilizes sharply bent bulge backbones that are poised for an in-line RNA cleavage reaction. Cooperativity arises because an arginine pair from one catalytic domain sandwiches a nucleobase within the bulge cleaved by the other catalytic domain.

The heteromeric Nanoarchaeum equitans splicing endonuclease cleaves noncanonical bulge-helix-bulge motifs of joined tRNA halves

Among the tRNA population of the archaeal parasite Nanoarchaeum equitans are five species assembled from separate 5' and 3' tRNA halves and four species derived from tRNA precursors containing introns. In both groups an intervening sequence element must be removed during tRNA maturation. A bulge-helix-bulge (BHB) motif is the hallmark structure required by the archaeal splicing endonuclease for recognition and excision of all introns. BHB motifs are recognizable at the joining sites of all five noncontinuous tRNA species, although deviations from the canonical BHB motif are clearly present in at least two of them. Here, we show that the N. equitans splicing endonuclease cleaves tRNA precursors containing normal introns, as well as all five noncontinuous precursor tRNAs, at the predicted splice sites, indicating the enzyme's dual role in the removal of tRNA introns and processing of tRNA halves to be joined in trans. The cleavage activity on a set of synthetic canonical and noncanonical BHB constructs showed that the N. equitans splicing endonuclease accepts a broader range of substrates than the homodimeric Archaeoglobus fulgidus enzyme. In contrast to the A. fulgidus endonuclease, the N. equitans splicing enzyme possesses two different subunits. This heteromeric endonuclease type, found in N. equitans, in all Crenarchaeota, and in Methanopyrus kandleri, is able to act on the noncanonical tRNA introns present only in these organisms, which suggests coevolution of enzyme and substrate.

tRNA-isoleucine-tryptophan composite gene

Transfer-RNA genes in archaea often have introns intervening between exon sequences. The structural motif at the boundary between exon and intron is the bulge-helix-bulge. Computational investigations of these boundary structures in Haloarcula marismortui lead us to propose that tRNA-isoleucine and tRNA-tryptophan genes are co-located. Precise in silico identification of the splice-sites on the bulges at the exon-intron boundaries lead us to infer that a single intron-containing composite tRNA-gene can give rise to more than one gene product.

Coevolution of tRNA intron motifs and tRNA endonuclease architecture in Archaea

Members of the three kingdoms of life contain tRNA genes with introns. The introns in pre-tRNAs of Bacteria are self-splicing, whereas introns in archaeal and eukaryal pre-tRNAs are removed by splicing endonucleases. We have studied the structures of the endonucleases of Archaea and the architecture of the sites recognized in their pre-tRNA substrates. Three endonuclease structures are known in the Archaea: a homotetramer in some Euryarchaea, a homodimer in other Euryarchaea, and a heterotetramer in the Crenarchaeota. The homotetramer cleaves only the canonical bulge-helix-bulge structure in its substrates. Variants of the substrate structure, termed bulge-helix-loops, appear in the pre-tRNAs of the Crenarcheota and Nanoarcheota. These variant structures can be cleaved only by the homodimer or heterotetramer forms of the endonucleases. Thus, the structures of the endonucleases and their substrates appear to have evolved together.

A pre-tRNA carrying intron features typical of Archaea is spliced in yeast

Archaeal pre-tRNAs are characterized by the presence of the bulge-helix-bulge (BHB) structure in the intron stem-and-loop region. A chimeric pre-tRNA was constructed bearing an intron of the archaeal type and the mature domain of the Saccharomyces cerevisiae suppressor SUP4 tRNA(Tyr). This pre-tRNA(ArchEuka) is correctly cleaved in several cell-free extracts and by purified splicing endonucleases. It is also cleaved and ligated in S. cerevisiae cells, providing efficient suppression of nonsense mutations in various genes.

Identification of BHB splicing motifs in intron-containing tRNAs from 18 archaea: evolutionary implications

Most introns of archaeal tRNA genes (tDNAs) are located in the anticodon loop, between nucleotides 37 and 38, the unique location of their eukaryotic counterparts. However, in several Archaea, mostly in Crenarchaeota, introns have been found at many other positions of the tDNAs. In the present work, we revisit and extend all previous findings concerning the identification, exact location, size, and possible fit to the proposed bulge-helix-bulge structural motif (BHB, now renamed hBHBh') of the sequences spanning intron-exon junctions in intron-containing tRNAs of 18 archaea. A total of 103 introns were found located at the usual position 37/38 and 33 introns at 14 other different positions, that is, in the anticodon stem and loop, in the D-and T-loops, in the V-arm, or in the amino acid arm. For introns located at 37/38 and elsewhere in the pre-tRNA, canonical hBHBh' motifs were not always found. Instead, a relaxed hBH or HBh' motif including the constant central 4-bp helix H flanked by one helix (h or h') on either side generating only one bulge could be disclosed. Also, for introns located elsewhere than at position 37/38, the hBHBh' (or HBh') structure competes with the three-dimensional structure of the mature tRNA, attesting to important structural rearrangements during the complex multistep maturation-splicing processes. A homotetramer-type of splicing endonuclease (like in all Crenarchaeota) instead of a homodimeric-type of enzyme (as in most Euryarchaeota) appears to best fit the requirement for splicing introns at relaxed hBH or HBh' motifs, and may represent the most primitive form of this enzyme.

An archaeal endoribonuclease catalyzes cis- and trans- nonspliceosomal splicing in mouse cells

The tRNA endonuclease from the archaebacterium Methanococcus jannaschii (MJ endonuclease) can cleave RNAs forming specific bulge-helix-bulge (BHB) structures recognized by the enzyme. The resulting cleavage products are subsequently joined together by an endogenous ligase. We demonstrate the potential of using this strategy for repairing RNA in higher organisms by expressing the enzyme in mouse cells. Reporter target mRNAs modified with 17-nucleotide introns, flanked by sequences capable of forming BHB structures in cis, were expressed in mouse cells. RNA molecules that can form BHB substrates in trans with targeted mRNAs were also designed. Co-transfection of mouse cells with plasmids expressing these RNAs and the MJ endonuclease led to formation of RNA chimeras in which the target and exogenous RNA were recombined across the BHB. This technology is not limited to mRNA, but could in principle be used to destroy, modify or restore the function of a vast repertoire of RNA species or to join selectable tags to target RNAs.

RNA-modifying machines in archaea

It has been known for nearly half a century that coding and non-coding RNAs (mRNA, and tRNAs and rRNAs respectively) play critical roles in the process of information transfer from DNA to protein. What is both surprising and exciting, are the discoveries in the last decade that cells, particularly eukaryotic cells, contain a plethora of non-coding RNAs and that these RNAs can either possess catalytic activity or can function as integral components of dynamic ribonucleoprotein machines. These machines appear to mediate diverse, complex and essential processes such as intron excision, RNA modification and editing, protein targeting, DNA packaging, etc. Archaea have been shown to possess RNP complexes; some of these are authentic homologues of the eukaryotic complexes that function as machines in the processing, modification and assembly of rRNA into ribosomal subunits. Deciphering how these RNA-containing machines function will require a dissection and analysis of the component parts, an understanding of how the parts fit together and an ability to reassemble the parts into complexes that can function in vitro. This article summarizes our current knowledge about small-non-coding RNAs in Archaea, their roles in ribosome biogenesis and their relationships to the complexes that have been identified in eukaryotic cells.

Two reactions of Haloferax volcanii RNA splicing enzymes: joining of exons and circularization of introns

Archaeal RNA splicing involves at least two protein enzymes, a specific endonuclease and a specific ligase. The endonuclease recognizes and cleaves within a characteristic bulge-helix-bulge (BHB) structure formed by pairing of the regions near the two exon-intron junctions, producing 2',3'-cyclic phosphate and 5'-hydroxyl termini. The ligase joins the exons and converts the cyclic phosphate into junction phosphate. The ligated product contains a seven-base hairpin loop, in which the splice junction is in between the two 3' terminal residues of the loop. Archaeal splicing endonucleases are also involved in rRNA processing, cutting within the BHB structures formed by pairing of the 5' and 3' flanking regions of the rRNAs. Large free introns derived from pre-rRNAs have been observed as stable and abundant circular RNAs in certain Crenarchaeota, a kingdom in the domain Archaea. In the present study, we show that the cells of Haloferax volcanii, a Euryarchaeote, contain circular RNAs formed by 3',5'-phosphodiester linkage between the two termini of the introns derived from their pre-tRNAs. H. volcanii ligase, in vitro, can also circularize both endonuclease-cleaved introns, and non-endonuclease-produced substrates. Exon joining and intron circularization are mechanistically similar ligation reactions that can occur independently. The size of the ligated hairpin loop and position of the splice junction within this loop can be changed in in vitro ligation reactions. Overall, archaeal RNA splicing seems to involve two sets of two symmetric transesterification reactions each.

The solution structure of the loop E region of the 5S rRNA from spinach chloroplasts

A structure has been obtained for the loop E region of the 5S rRNA from Spinacia oleracia chloroplast ribosomes using residual dipolar coupling data as well as NOE, J coupling and chemical shift information. Even though the loop E sequence of this chloroplast 5S rRNA differs from that of Escherichia coli loop E at approximately 40% of its positions, its conformation is remarkably similar to that of E.coli loop E. Consistent with this conclusion, ribosomal protein L25 from E.coli, which binds to the loop E region of both intact E.coli 5S rRNA and to oligonucleotides containing that sequence, also binds to the chloroplast-derived oligonucleotide discussed here.

Ribonuclease III: new sense from nuisance

RNases play an important role in the processing of precursor RNAs, creating the mature, functional RNAs. The ribonuclease III family currently is one of the most interesting families of endoribonucleases. Surprisingly, RNase III is involved in the maturation of almost every class of prokaryotic and eukaryotic RNA. We present an overview of the various substrates and their processing. RNase III contains one of the most prominent protein domains used in RNA-protein recognition, the double-stranded RNA binding domain (dsRBD). Progress in the understanding of this domain is summarized. Furthermore, RNase III only recently emerged as a key player in the new exciting biological field of RNA silencing, or RNA interference. The eukaryotic RNase III homologues which are likely involved in this process are compared with the other members of the RNase III family.

Cleavage of non-tRNA substrates by eukaryal tRNA splicing endonucleases

Eukaryal tRNA splicing endonucleases use the mature domains of pre-tRNAs as their primary recognition elements. However, they can also cleave in a mode that is independent of the mature domain, when substrates are able to form the bulge-helix-bulge structure (BHB), which is cleaved by archaeal tRNA endonucleases. We present evidence that the eukaryal enzymes cleave their substrates after forming a structure that resembles the BHB. Consequently, these enzymes can cleave substrates that lack the mature domain altogether. That raises the possibility that these enzymes could also cleave non-tRNA substrates that already have a BHB. As predicted, they can do so, both in vitro and in vivo.

NMR spectroscopic evidence for Mn(2+)(Mg(2+)) binding to a precursor-tRNA microhelix near the potential RNase P cleavage site

The binding of Mg(2+)/Mn(2+) to acceptor stem microhelices as minimal models for precursor-tRNA(Gly) is demonstrated by NMR spectroscopy. From the evaluation of COSY and NOESY spectra, binding sites for Mg(2+)/Mn(2+) can be inferred. In particular, one binding site exists near the ribose moiety of nucleotide -1 at the position of cleavage by RNase P. From comparison with a variant possessing a deoxynucleotide at this position, it is concluded that the 2'-OH group of this nucleotide is indispensable for coordinating the divalent metal ion. Hence, this catalytically important metal ion is "pre-bound" to the precursor-tRNA before complexation with RNase P.

Crystal structure of a dimeric archaeal splicing endonuclease

The splicing endonuclease from Archaeoglobus fulgidus (AF) belongs to the homodimeric family of splicing endonucleases, thought to have evolved from the homotetrameric endonucleases. We report here the crystal structure of the AF endonuclease determined at 2.8 A. The crystal structure of the full-length AF endonuclease contains a homodimer, with each monomer consisting of two homologous repeats joined together by an extended polypeptide chain of ten amino acid residues. The C-terminal repeat has a strong homology to that of a single subunit of the previously determined homotetrameric tRNA splicing endonuclease from Methanococcus jannaschii (MJ), indicating its role in catalysis. The N-terminal repeat is a more degenerate form of the MJ enzyme. Thus the N-terminal repeat is a "non-active" endonuclease fold evolved from the "active" one. By detailed comparison of the structures of the N-terminal and the C-terminal repeats, the binding region for RNA substrates containing a bulge-helix-bulge motif can be identified. Based on the identified RNA-binding region, a cation-pi interaction is suggested to be responsible for coordinating activities between the two active sites. In addition, the full-length AF endonuclease can adopt a higher-ordered fibrous structure in solution, as revealed by the unusual crystallographic packing interactions and other biochemical analysis. This 4(3)-fold fibrous structure adopted by the full-length enzyme is inaccessible to the RNA substrate and is largely stabilized by the first 60 amino acid residues. A mutated form of AF endonuclease with its first 60 residues removed catalyzes the cleavage reaction at a significantly higher rate. Whether there is any role in vivo for this structure-mediated modulation of activity remains to be determined.

Structural motifs in RNA

An RNA motif is a discrete sequence or combination of base juxtapositions found in naturally occurring RNAs in unexpectedly high abundance. Because all the motifs examined so far have three-dimensional structures independent of the context in which they are embedded, they are important components of the "kit" of structural elements from which RNAs are constructed. This review discusses the structures of the motifs that have been identified so far and speculates on the importance of their role in determining RNA conformation and their evolutionary origin.

RNA bulges as architectural and recognition motifs

RNA bulges constitute versatile structural motifs in the assembly of RNA architectures. Three-dimensional structures of RNA molecules and their complexes reveal the role of bulges in RNA architectures and illustrate the molecular mechanisms by which they confer intramolecular interactions and intermolecular recognition.

Stitching together RNA tertiary architectures

The powerful explanatory paradigm of molecular biology requiring form to co-evolve with function has again been proven successful when, over the recent two decades, a wealth of biological functions have been uncovered for RNA. Previously considered as a mere mediator of the genetic code, RNA is now acknowledged as a key player in a wide variety of cellular processes. Along with the discovery of novel biological functions of RNA molecules, a number of RNA three-dimensional structures have been solved which beautifully demonstrate the molecular adaptability which allows RNA to participate as a key player in these functions. A distinct repertoire of molecular motifs provides a basis for the assembly of complex RNA tertiary architectures.

NMR structure of the mature dimer initiation complex of HIV-1 genomic RNA

The two identical genomic RNA strands inside each HIV-1 viral particle are linked through homodimerization of an RNA stem-loop, termed SL1, near their 5' ends. SL1 first dimerizes through a palindromic sequence in its loop, forming a transient kissing-loop complex which then refolds to a mature, linear duplex. We previously reported the NMR structure of a 23-base truncate of SLI in kissing-dimer form, and here report the high-resolution structure of its linear isoform. This structure comprises three short duplex regions--derived from the central palindrome and two stem regions of each strand, respectively--separated by two bulges that each encompass three unpaired adenines flanking the palindromes. The stacking pattern of these adenines differs from that seen in the kissing-loop complex, and leads to greater colinear base stacking overall. Moreover, the mechanical distortion of the palindrome helix is reduced, and base pairs ruptured during formation of the kissing-loop complex are re-established, so that all potential Watson-Crick pairs are intact. These features together likely account for the greater thermodynamic stability of the mature dimer as compared to its kissing-loop precursor.

Substrate requirements for a novel archaeal endonuclease that cleaves within the 5' external transcribed spacer of Sulfolobus acidocaldarius precursor rRNA

During ribosome biogenesis in the hyperthermophilic archaeon Sulfolobus acidocaldarius, at least three separate precursor endonucleolytic cleavages occur within the 144-nucleotide-long 5' external transcribed spacer (5' ETS) region of the rRNA operon primary transcript. The 5' ETS sequence contains three regions of very stable helical structure. One cleavage (5' to position -98) is in the single-stranded region between the 5' and the central helical domains; a second cleavage (5' to position -31) is in the single-stranded region between the central and the 3' helical domains; and a third cleavage is at the 5' ETS-16S junction (5' to position +1). The three sites share a common consensus sequence around the position of cleavage. We have used an in vitro pre-RNA processing assay to define some of the sequence and structural recognition elements necessary for the two precursor cleavages 5' to positions -98 and -31. Surprisingly, none of the three predominant helical domains are required for recognition or targeting of the cleavages, although their removal reduces the rate of cleavage site utilization. We show that the sequence AAG downward arrow (CA)UU encompassing each site contains at least some of the essential features for recognition and efficient targeting of the cleavages. Cleavage depends on the presence of a purine 5' and a uracil two nucleotides 3' to the scissile phosphodiester bond. Mutations to other bases at these critical positions are either not cleaved or cleaved very poorly. Finally, on the basis of intermediates that are produced during a processing reaction, we can conclude that the cleavages at positions 98 and 31 are not ordered in vitro.