Lepton contamination and photon scatter produced by open field X-ray beams in the build-up region

Experimental study of the influence of dental restorations on thermal and fast photo-neutron production in radiotherapy with a high-energy photon beam

In head and neck radiation therapy, the presence of dental restorations can increase unwanted neutron dose to the patient. This study aimed at the measurement of secondary neutron production induced by irradiation of a healthy tooth, Amalgam, Ni-Cr alloy and Ceramco with a photon beam generated in the treatment head of a Siemens Primus linac at a voltage of 15 MV. The irradiation field amounted to 10 × 10 cm². The measurements of thermal and fast-neutron equivalent doses were performed by means of CR-39 detectors positioned in various depths of a Perspex (polymethyl methacrylate) phantom as at open field as at presence of corresponding dental restorations. The general trend of thermal neutron as well as fast-neutron equivalent dose behind the denture samples reveals their reduction with increasing depth. The maximum values of thermal-neutron dose related to Amalgam, Ceramco and Ni-Cr alloy amount to 1.45 mSv/100 MU, 1.38 mSv/100 MU and 1.32 mSv/100 MU, whereas the corresponding maximum values of fast-neutron dose at the depth of 1.8 cm amount to 0.19 mSv/100 MU, 1.04 mSv/100 MU and 0.97 mSv/100 MU, respectively. The present study investigates the neutron dose accompanied with radiotherapy. It is recommended that attempts have to be made to ensure that dental restorations are not in the path of the primary high-energy photon beam. Considering treatment planning, the guidelines of radiation protection should be improved.

A Monte Carlo study on electron and neutron contamination caused by the presence of hip prosthesis in photon mode of a 15 MV Siemens PRIMUS linac

Several investigators have pointed out that electron and neutron contamination from high‐energy photon beams are clinically important. The aim of this study is to assess electron and neutron contamination production by various prostheses in a high‐energy photon beam of a medical linac. A 15 MV Siemens PRIMUS linac was simulated by MCNPX Monte Carlo (MC) code and the results of percentage depth dose (PDD) and dose profile values were compared with the measured data. Electron and neutron contaminations were calculated on the beam's central axis for Co‐Cr‐Mo, stainless steel, Ti‐alloy, and Ti hip prostheses through MC simulations. Dose increase factor (DIF) was calculated as the ratio of electron (neutron) dose at a point for 10×10 cm2 field size in presence of prosthesis to that at the same point in absence of prosthesis. DIF was estimated at different depths in a water phantom. Our MC‐calculated PDD and dose profile data are in good agreement with the corresponding measured values. Maximum dose increase factor for electron contamination for Co‐Cr‐Mo, stainless steel, Ti‐alloy, and Ti prostheses were equal to 1.18, 1.16, 1.16, and 1.14, respectively. The corresponding values for neutron contamination were respectively equal to: 184.55, 137.33, 40.66, and 43.17. Titanium‐based prostheses are recommended for the orthopedic practice of hip junction replacement. When treatment planning for a patient with hip prosthesis is performed for a high‐energy photon beam, attempt should be made to ensure that the prosthesis is not exposed to primary photons.

PACS numbers: 87.56.bd, 87.55.kh, 87.55.Gh

Characterization of electron contamination in megavoltage photon beams

The purpose of the present study is to characterize electron contamination in photon beams in different clinical situations. Variations with field size, beam modifier (tray, shaping block) and source-surface distance (SSD) were studied. Percentage depth dose measurements with and without a purging magnet and replacing the air by helium were performed to identify the two electron sources that are clearly differentiated: air and treatment head. Previous analytical methods were used to fit the measured data, exploring the validity of these models. Electrons generated in the treatment head are more energetic and more important for larger field sizes, shorter SSD, and greater depths. This difference is much more noticeable for the 18 MV beam than for the 6 MV beam. If a tray is used as beam modifier, electron contamination increases, but the energy of these electrons is similar to that of electrons coming from the treatment head. Electron contamination could be fitted to a modified exponential curve. For machine modeling in a treatment planning system, setting SSD at 90 cm for input data could reduce errors for most isocentric treatments, because they will be delivered for SSD ranging from 80 to 100 cm. For very small field sizes, air-generated electrons must be considered independently, because of their different energetic spectrum and dosimetric influence.

Effects of treatment distance and field size on build-up characteristics of Monte Carlo calculated absorbed dose for electron irradiation

Surface, build-up and depth dose characteristics of a monoenergetic electron point source simulated by Monte Carlo code MCNP4c for varying field size and SSD are extensively studied in this paper. MCNP4c (Monte Carlo N-Particle Transport Code System) has been extensively used in clinical dose simulation for its versatility and powerful geometrical coding tool. A sharp increase in PDD is seen with the Monte Carlo Modelling immediately at the surface within the first 0.2 mm. This effect cannot be easily measured by experimental instruments for electron contamination, and may lead to a clinical underdosing of the basal cell layer, which is one of the most radiation sensitive layers and the main target for skin carcinogenesis. A high percentage build-up dose for electron irradiation was shown. No significant effects in surface PDDs were modelled with different SSD values from 95 cm to 125 cm. Three depths were studied in detail, these being 0.05 mm, the lower depth of the basal cell layer; 0.95 mm, the lower depth of the dermal layer; and 0.95 cm, a position within the subcutaneous tissue. Results showed only small surface PDD differences were modelled for SSD variations from 95 cm to 125 cm and field sizes variation from the values between 5 cm and 10 cm squares to 25 cm. When the field side length is smaller than this, the surface dose shows an increasing trend by about 7% at 5 x 5 cm2.

Monte Carlo-based treatment planning for a spoiler system with experimental validation using plane-parallel ionization chambers

A beam spoiler is often used to increase the build-up dose near the surface for treatment of superficial treatment areas. Photon-beam spoilers produce a large amount of contaminant electrons, conditions for which standard, commercial treatment-planning system dose-calculation algorithms are inadequate for producing accurate dose calculations. In this study, we implemented a Monte Carlo (MC) dose-calculation algorithm for this spoiler system. With and without a spoiler of 1 cm Lucite, depth doses and transverse profiles in the build-up region were measured for field sizes of 5 x 5 cm2 and 10 x 10 cm2 at the spoiler-to-surface distances (STSDs) of 6, 10 and 15 cm. An Attix chamber and a Markus chamber were used for depth doses, whereas a diode detector was used for transverse profiles. An MC simulation using BEAM/DOSXYZ was used to compare the calculated and the measured data. The MC calculations agreed with the Attix chamber measurements within 2% for all STSDs and field sizes, whereas the Markus data--even with corrections made-showed a discrepancy of about 3.5% with a maximum difference of 7.3% for a field size of 10 x 10 cm2 at an STSD of 6 cm. The MC treatment-planning system was successfully applied to a head-and-neck case using 6 MV photon beams with a beam spoiler.