Binary immobilization of Candida rugosa lipase on chitosan

Evaluation of wool protein hydrolysate as peptone for production of microbial enzymes

Peptones are one of the most expensive components of microbial culture media. The present study was conducted to test the usability of low-cost sheep wool peptone (SWP) as an organic nitrogen source in the production of six industrially important enzymes (lipase, amylase, tannase, pectinase, cellulase and invertase). SWP was prepared by alkaline hydrolysis and acid neutralization. Bacillus licheniformis and Aspergillus niger were selected as test microorganisms for enzyme production. To evaluate the efficacy of SWP in enzyme production, it was compared with commercial tryptone peptone (TP) in the shaking flask cultures of the test microorganisms. The optimum concentration of both SWP and TP was determined to be 8 g/L for the production of B. licheniformis-derived enzymes, but 6 g/L for the production of A. niger-derived enzymes. It was determined that SWP was superior to TP in the production of four enzymes (lipase, amylase, tannase and pectinase) of both B. licheniformis and A. niger. This is the first study about the usage of sheep wool protein hydrolysate (SWP) as an organic nitrogen source or a peptone in fermentative production of microbial enzymes.

Continuous treatment of diethyl hexyl and dibutyl phthalates by fixed-bed reactor: Comparison of two esterase bionanocomposites

The removal of Diethyl hexyl phthalate (DEHP) and Dibutyl phthalate (DBP) is of great importance due to their potential adverse effects on the environment and human health. In this study, two bionanocomposites prepared by immobilization of Bacillus subtilis esterase by crosslinking to halloysite and supported in chitosan and alginate beads were studied and proposed as a green approach. The esterase immobilization was confirmed by physical-chemical characterization. Bionanocomposite using chitosan showed the best degradation levels in batch tests attaining complete degradation of DBP and around 90% of DEHP. To determine the operational stability and efficiency of the system, two fixed bed reactors filled with both bionanocomposites were carried out operating in continuous mode. Chitosan based bionanocomposite showed the best performance being able to completely remove DBP and more than 85% of DEHP at the different flowrates. These results proved the potential of these synthesized bionanocomposites to effectively remove Phthalic Acid Esters.

Characterization of Carboxylic Acid Reductase from Mycobacterium phlei Immobilized onto Seplite LX120

A multi-domain oxidoreductase, carboxylic acid reductase (CAR), can catalyze the one-step reduction of carboxylic acid to aldehyde. This study aimed to immobilize bacterial CAR from a moderate thermophile Mycobacterium phlei (MpCAR). It was the first work reported on immobilizing bacterial CAR onto a polymeric support, Seplite LX120, via simple adsorption. Immobilization time and protein load were optimized for MpCAR immobilization. The immobilized MpCAR showed optimal activity at 60 °C and pH 9. It was stable over a wide range of temperatures (10 to 100 °C) and pHs (4–11), retaining more than 50% of its activity. The immobilized MpCAR also showed stability in polar solvents. The adsorption of MpCAR onto the support was confirmed by Scanning Electron Microscopy (SEM), Fourier-Transform Infrared (FTIR) spectroscopy, and Brunauer–Emmett–Teller (BET) analysis. The immobilized MpCAR could be stored for up to 6 weeks at 4 °C and 3 weeks at 25 °C. Immobilized MpCAR showed great operational stability, as 59.68% of its activity was preserved after 10 assay cycles. The immobilized MpCAR could also convert approximately 2.6 mM of benzoic acid to benzaldehyde at 60 °C. The successfully immobilized MpCAR on Seplite LX120 exhibited improved properties that benefit green industrial processes.

A novel pressed coal from citrus and cooking oil wastes using fungi

Nowadays renewable energy with low prices is a global target that has taken the attention to compare alternatives energy sources with fossil fuels. Therefore, this study was established to find suitable and sustainable alternative low-cost fuels source. Cooking oil waste (COW) was mixed with non-pretreated citrus tree fibers (CTF) (0.5 mL to 1 g ratio) and pressed to formulate coal (CTF/COW). Otherwise, this mixture was subjected to in situ fungal pretreated using Aspergillus flavus isolate to simplify the mixture composition and pressed to offer in a usable form with enhancing their heating value for the first time. CTF/COW was characterized using attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), scanning electron microscope (SEM) and thermal analysis (TGA) before and after treatment. The fungal isolate was observed with enzyme productivity and activity of CMCase, avicelase, xylanase, mannanase, α-glucosidase, β-glucosidase, lignin peroxidase and lipase according to enzyme assays and the chemical compositions of CTF before and after fungal treatment, where the best PH for enzymes extraction was between 5 and 7. The fungal enzymes increased the heating value by about two and half folds in comparison with non-pretreated coal. Moreover, the calorific value of tCTF/COW was 43,422 kJ/kg, which was higher than CTF recorded 18,214 kJ/kg and COW recorded 39,823 kJ/kg. Our result suggests that fungal treatment of the mixture of citrus trees and cooking oil waste presents as a promising low-cost and eco-friendly coal.

Waste frying oil hydrolysis and lipase production by cold-adapted Pseudomonas yamanorum LP2 under non-sterile culture conditions

Non-sterile culture technique is currently used in some microbial processes. However, there is no study on the use of this technique in the production of microbial lipases and hydrolysis of waste frying oils. This study was conducted to hydrolyse waste frying oils and produce lipase under non-sterile culture conditions using locally isolated cold-adapted bacteria. Of 75 bacterial isolates, the psychrotolerant Pseudomonas yamanorum LP2 (Genbank number: KU711080) was determined to have the highest lipase activity. It was found that a combination of restricted nutrient availability, low temperature and high inoculum volume prevented microbial contaminants under non-sterile conditions. The most favourable parameters for lipase production under both sterile and non-sterile conditions were 15°C temperature, pH 8, 30 mL/L inoculum volume, 40 mL/L waste frying oil concentration, 10 mL/L Tween-80 and 72 h incubation time. The maximum lipase activities in sterile and non-sterile media were determined as 93.3 and 96.8 U/L, respectively. The present process designed for enzyme production and waste oil hydrolysis can reduce the cost of cultivation medium as well as energy consumption and workload. The potential of cold-adapted bacteria to produce lipase and hydrolyse waste oils under non-sterile culture conditions was first tested in the current study.

Different strategies for the lipase immobilization on the chitosan based supports and their applications

Immobilized enzymes have received incredible interests in industry, pharmaceuticals, chemistry and biochemistry sectors due to their various advantages such as ease of separation, multiple reusability, non-toxicity, biocompatibility, high activity and resistant to environmental changes. This review in between various immobilized enzymes focuses on lipase as one of the most practical enzyme and chitosan as a preferred biosupport for lipase immobilization and provides a broad range of studies of recent decade. We highlight several aspects of lipase immobilization on the surface of chitosan support containing various types of lipase and immobilization techniques from physical adsorption to covalent bonding and cross-linking with their benefits and drawbacks. The recent advances and future perspectives that can improve the present problems with lipase and chitosan such as high-price of lipase and low mechanical resistance of chitosan are also discussed. According to the literature, optimization of immobilization methods, combination of these methods with other techniques, physical and chemical modifications of chitosan, co-immobilization and protein engineering can be useful as a solution to overcome the mentioned limitations.

Enhancement of laccase immobilization onto wet chitosan microspheres using an iterative protocol and its potential to remove micropollutants

This study was focused on creating a new and effective immobilization method for Trametes versicolor laccase (Lc) by using chitosan (CS) microspheres activated with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride. The activation of the support alternated with immobilization of the enzyme, in repetitive procedures, led to obtaining three different products. Also, the physicochemical properties of the new products were investigated and compared with those of free laccase. The discoloration and reusability properties of the immobilized Lc were evaluated using indigo carmine (IC) as a model micropollutant. The ESEM and FT-IR methods demonstrated that the Lc was successfully immobilized. The relative reaction rate and the total amount of immobilized Lc were tripled using the iterative protocol as proved by specific and Bradford assays. The maximum amount of immobilized Lc was 8.4 mg Lc/g CS corresponding to the third immobilization procedure. Compared to the free Lc, the operational stability of the immobilized Lc was significantly improved, presenting a maximum activity plateau over a pH range of 3-5 and a temperature range of 25-50 °C. The thermal inactivation study at 55 °C proved that the immobilized enzyme is three times more stable than the free Lc. The isoconversional and Michaelis-Menten methods showed that the immobilization did not affect the enzyme catalytic properties. After 32 days of storage, the residual activities are 85% for the immobilized laccase and 40% for the free one. In similar conditions, the free and immobilized Lc (2.12 x 10^-6 M) completely decolorized IC (7.15 x 10^-5 M) within 14 min. The immobilized Lc activity remained almost constant (80%) during 10 reusability cycles. All these results highlight the substantial advantages of the new immobilization protocol and demonstrate that immobilized Lc can be used as a promising micropollutant removal from real wastewater.

Thermo-alkali-stable lipase from a novel Aspergillus niger: statistical optimization, enzyme purification, immobilization and its application in biodiesel production

The influences of nutritional components affecting lipase production from the new Aspergillus niger using wheat bran as substrate were studied by employing Plackett-Burman and central composite statistical designs. Out of the 11 medium components tested, sucrose, KH₂PO₄ and MgSO₄ at final concentrations of 3.0, 1.0 and 0.5 g/L, respectively, were reported to contribute positively to enzyme production (20.09 ± 0.98 U/g ds). The enzyme was purified through ammonium sulfate precipitation followed by Sephadex G-100 gel filtration. Molecular mass of the purified lipase was 57 kDa as evident on SDS-PAGE. Different methods of immobilization were studied and the highest immobilization yield of 81.7 ± 2.18% was reported with agarose (2%) and the optimum temperature was raised from 45 to 50 °C. Immobilized lipase could retain 80% of its original activity at 60 °C after 1 hr of incubation, and was stable at pH values between neutral and alkaline pH. Lipase-catalyzed transesterification process of fungal oil resulted in a fatty acid methyl ester yield consisting of a high percentage of polyunsaturated fatty acids (83.6%), making it appropriate to be used as winter-grade biodiesel. The operational stability studies revealed that the immobilized lipase could keep 70% of its total activity after 5 cycles of the transesterification process.

Free and Substrate-Immobilised Lipases from Fusarium verticillioides P24 as a Biocatalyst for Hydrolysis and Transesterification Reactions

Fungal enzymes are widely used in technological processes and have some interesting features to be applied in a variety of biosynthetic courses. Here, free and substrate-immobilised lipases from Fusarium verticillioides P24 were obtained by solid-state fermentation using wheat bran as substrate and fungal carrier. Based on their hydrolytic and transesterification activities, the lipases were characterised as pH-dependent in both reactions, with higher substrate conversion in an alkaline environment. Thermally, the lipases performed well from 30 to 45 °C, being more stable in mild conditions. Organic solvents significantly influenced the lipase selectivity using different vegetable oils as fatty acid source. Omega(ω)-3 production in n-hexane achieved 45% using canola oil, against ≈ 18% in cyclohexane. However, ω-6 production was preferably produced for both solvents using linseed oil with significant alterations in the yield (≈ 79% and 49% for n-hexane and cyclohexane, respectively). Moreover, the greatest enzyme selectivity for ω-6 led us to suppose a lipase preference for the Sn1 position of the triacylglycerol. Lastly, a transesterification reaction was performed, achieving 90% of ester conversion in 72 h. This study reports the characterisation and use of free and substrate-immobilised lipases from Fusarium verticillioides P24 as an economic and efficient method for the first time.

Ethyl esters production catalyzed by immobilized lipases is influenced by n-hexane and ter-amyl alcohol as organic solvents

Lipase stability in organic solvent is crucial for its application in many biotechnological processes as biocatalyst. One way to improve lipase's activity and stability in unusual reaction medium is its immobilization on inert supports. Here, lipases from different sources and immobilized through weak chemical interactions on hydrophobic and ionic supports had their transesterification ability dramatically dependent on the support and also on the solvent that had been used. The ethanolysis of sardine oil was carried out at the presence of cyclohexane and tert-amyl alcohol, in which Duolite A568-Thermomyces lanuginosa lipase derivative achieved 49% of ethyl esters production after 24 h in cyclohexane. The selectivity of immobilized lipases was also studied and, after 3 h of synthesis, the reaction with Duolite A568-Thermomyces lanuginosa derivative in cyclohexane produced 24% ethyl ester of eicosapentaenoic acid and 1.2% ethyl ester of docosahexaenoic acid, displaying a selectivity index of 20 times the ethyl ester of eicosapentaenoic acid. Different derivatives of Candida antarctica lipases fraction B (CALB) and phospholipase Lecitase^® Ultra (Lecitase) were also investigated. Along these lines, a combination between these factors may be applied to improve the activity and selectivity of immobilized lipases, decreasing the total cost of the process.

Covalent Immobilization of Candida rugosa Lipase on Epichlorohydrin-Coated Magnetite Nanoparticles: Enantioselective Hydrolysis Studies of Some Racemic Esters and HPLC Analysis

In this study, a new biocatalyst was prepared by immobilizing Candida rugosa lipase epichlorohydrin-functionalized onto the surface of the nanoparticles. Magnetite nanoparticles were obtained by chemical co-precipitation method of Fe²⁺ and Fe³⁺, and then the prepared uncoated and coated nanoparticles were characterized by XRD, FT-IR and TGA. Lipase was covalently attached to activated nanoparticles. The catalytic properties of free and immobilized lipases were determined. It was found that the optimum temperature for free and immobilized lipases was 30 °C and 35 °C, respectively. The optimum pH values were found to be 7.0 and 8 for free and immobilized lipases, respectively. Immobilized lipase was found to retain significant activity even after the seventh use. In the final section of the study, optically pure compounds were obtained by carrying out the enantioselective hydrolysis studies of racemic esters by using immobilized lipase. Enantiomeric excesses of the products in the enantioselective hydrolysis of racemic ibuprofen and naproxen methyl ester and racemic butyl mandelate were determined to be 94.93, 77.30 and 68.15, respectively.

Immobilization of a Novel ESTBAS Esterase from Bacillus altitudinis onto an Epoxy Resin: Characterization and Regioselective Synthesis of Chloramphenicol Palmitate

Novel gene estBAS from Bacillus altitudinis, encoding a 216-amino acid esterase (EstBAS) with a signal peptide (SP), was expressed in Escherichia coli. EstBASΔSP showed the highest activity toward p-nitrophenyl hexanoate at 50 °C and pH 8.0 and had a half-life (T1/2) of 6 h at 50 °C. EstBASΔSP was immobilized onto a novel epoxy resin (Lx-105s) with a high loading of 96 mg/g. Fourier transform infrared (FTIR) spectroscopy showed that EstBASΔSP was successfully immobilized onto Lx-105s. In addition, immobilization improved its enzymatic performance by widening the tolerable ranges of pH and temperature. The optimum temperature of immobilized EstBASΔSP (Lx-EstBASΔSP) was higher, 60 °C, and overall thermostability improved. T1/2 of Lx-EstBASΔSP and free EstBASΔSP at 60 °C was 105 and 28 min, respectively. Lx-EstBASΔSP was used as a biocatalyst to synthesize chloramphenicol palmitate by regioselective modification at the primary hydroxyl group. Conversion efficiency reached 94.7% at 0.15 M substrate concentration after 24 h. Lx-EstBASΔSP was stable and could be reused for seven cycles, after which it retained over 80% of the original activity.

Novel Sanger's Reagent-like Styrene Polymer for the Immobilization of Burkholderia cepacia Lipase

Sanger's reaction, which was originally developed for amino acid detection, was utilized for enzyme immobilization. The newly synthesized polymer support, which was called polymer NO₂-4-fluorostyrene-divinylbenzene (pNFD), was embedded with a Sanger's reagent-like functional group for immobilizing enzymes covalently under mild reaction conditions. Using Burkholderia cepacia lipase (BCL) as the target enzyme, the immobilization efficiency and activity of pNFD-BCL reached as high as 1.2 mg·g^-1 and 33.21 U·g^-1 (a specific activity of 27 675 U·g^-1), respectively, realizing 90% activity recovery. It also improved the optimal reaction temperature of BCL from 40 to 65 °C, under which its full activity could be retained for 4 h. The new carrier also widened the pH-adaptive range of BCL as 6.5-10.0, allowing the lipase to operate normally in weak acid environment. Reusability of pNFD-BCL was significantly improved as almost no activity and/or enantioselectivity loss was observed in 200 h of triglyceride hydrolysis reaction and 17 batches of ( R, S)-1-phenylethanol resolution reaction.

Electrochemical biosensing of galactose based on carbon materials: graphene versus multi-walled carbon nanotubes

In this study, two enzyme electrodes based on graphene (GR), Co3O4 nanoparticles and chitosan (CS) or multi-walled carbon nanotubes (MWCNTs), Co3O4 nanoparticles, and CS, were fabricated as novel biosensing platforms for galactose determination, and their performances were compared. Galactose oxidase (GaOx) was immobilized onto the electrode surfaces by crosslinking with glutaraldehyde. Optimum working conditions of the biosensors were investigated and the analytical performance of the biosensors was compared with respect to detection limit, linearity, repeatability, and stability. The MWCNTs-based galactose biosensor provided about 1.6-fold higher sensitivity than its graphene counterpart. Moreover, the linear working range and detection limit of the MWCNTs-based galactose biosensor was superior to the graphene-modified biosensor. The successful application of the purposed biosensors for galactose biosensing in human serum samples was also investigated.

Bacillus sp. PS35 Lipase-Immobilization on Styrene-Divinyl Benzene Resin and Application in Fatty Acid Methyl Ester Synthesis

BACKGROUND

Lipase is an enzyme with immense application potential. Ester synthesis by lipase catalysis in organic media is an area of key industrial relevance. Enzymatic preparations with traits that cater to the needs of this function are hence being intensely researched.

OBJECTIVE

The objectives of the study were to immobilize the lipase from Bacillus sp. PS35 by cross-linking and adsorption onto styrene-divinyl benzene (Sty-Dvb) hydrophobic resin and to comparatively characterize the free and immobilized lipase preparations. The work also aimed to apply the immobilized lipase for catalysing the fatty acid methyl ester (FAME) synthesis from palm oil and optimize the process parameters for maximizing the yield.

MATERIALS AND METHODS

In this study, the purified lipase from Bacillus sp. PS35 was immobilized by adsorption onto styrene-divinyl benzene hydrophobic resin with gluteraldehyde cross-linking.

RESULTS

The immobilized enzyme showed better pH and temperature stabilities than the free lipase. Organic solvent stability was also enhanced, with the relative activity in the presence of methanol being shifted from 53% to 81%, thereby facilitating the enzyme's application in fatty acid methyl ester synthesis. It exhibited remarkable storage stability over a 30-day period and after 20 repetitive uses. Cross-linking also reduced enzyme leakage by 49%. The immobilized lipase was then applied for biodiesel production from palm oil. Methanol and oil molar ratio of 5:1, three step methanol additions, and an incubation temperature of 50°C were established to be the ideal conditions favoring the transesterification reaction, resulting in 97% methyl ester yield.

CONCLUSIONS

These promising results offer scope for further investigation and process scale up, permitting the enzyme's commercial application in a practically feasible and economically agreeable manner.

Immobilization of Yarrowia lipolytica Lipase on Macroporous Resin Using Different Methods: Characterization of the Biocatalysts in Hydrolysis Reaction

To improve the reusability and organic solvent tolerance of microbial lipase and expand the application of lipase (hydrolysis, esterification, and transesterification), we immobilized marine microbial lipase using different methods and determined the properties of immobilized lipases. Considering the activity and cost of immobilized lipase, the concentration of lipase was fixed at 2 mg/mL. The optimal temperature of immobilized lipases was 40°C and 5°C higher than free lipase. The activities of immobilized lipases were much higher than free lipase at alkaline pH (more than 50% at pH 12). The free lipase lost most activity (35.3%) and immobilized lipases retained more than 46.4% of their initial activity after 3 h heat treatment at 70°C. At alkaline pH, immobilized lipases were more stable than free lipase (more than 60% residue activity at pH 11 for 3 h). Immobilized lipases retained 80% of their activity after 5 cycles and increased enzyme activity (more than 108.7%) after 3 h treatment in tert-butanol. Immobilization of lipase which improved reusability of lipase and provided a chance to expand the application of marine microbial lipase in organic system expanded the application range of lipase to catalyze hydrolysis and esterification in harsh condition.

Study of cellulolytic enzyme immobilization on copolymers of N-vinylformamide

This study was focused on finding of effective carriers suitable for the immobilization of cellulase. Copolymers of N-vinylformamide (NFV) and divinylbenzene (DVB) were synthesized by free radical crosslinking polymerization in inverse suspension. Methyl silicone oil was used as the continuous phase. Three polymeric carriers based on P(NVF-co-DVB) with varying degrees of crosslinking and spherical particles with different grain sizes were obtained. The formamide groups in these carriers were hydrolyzed to amino groups, yielding three P(VAm-co-DVB) polymers with vinylamine units. Enzyme, cellulase (Novozym® 476), was immobilized onto carriers with vinylamine (through glutaraldehyde) and vinylformamide groups (without glutaraldehyde). The efficiency of the enzyme immobilization was determined based on the enzymatic activity of the enzyme during the catalytic reaction relative to that of the native enzyme. All tested carriers were found to be effective carriers for the immobilization of cellulase. However, the catalytic activity of cellulase immobilized on the P(VAM-co-DVB0.27)/2000/350 carrier was higher than that for the native enzyme. In addition, two molecular spectroscopy methods, Fourier-transform absorption infrared spectroscopy (FT-IR) and Fourier-transform Raman spectroscopy (FT-Raman), were used to analyze the carriers. These studies provided complete information regarding the structure of the studied copolymers.

Immobilization of Thermomyces lanuginosus lipase on ZnO nanoparticles: mimicking the interfacial environment

In this study, we propose that enzyme activity on immobilization can be controlled and enhanced by providing the environment mimicking the lipid/water interface.

Enhanced biocatalytic esterification with lipase-immobilized chitosan/graphene oxide beads

In this work, lipase from Candida rugosa was immobilized onto chitosan/graphene oxide beads. This was to provide an enzyme-immobilizing carrier with excellent enzyme immobilization activity for an enzyme group requiring hydrophilicity on the immobilizing carrier. In addition, this work involved a process for the preparation of an enzymatically active product insoluble in a reaction medium consisting of lauric acid and oleyl alcohol as reactants and hexane as a solvent. This product enabled the stability of the enzyme under the working conditions and allowed the enzyme to be readily isolated from the support. In particular, this meant that an enzymatic reaction could be stopped by the simple mechanical separation of the “insoluble” enzyme from the reaction medium. Chitosan was incorporated with graphene oxide because the latter was able to enhance the physical strength of the chitosan beads by its superior mechanical integrity and low thermal conductivity. The X-ray diffraction pattern showed that the graphene oxide was successfully embedded within the structure of the chitosan. Further, the lipase incorporation on the beads was confirmed by a thermo-gravimetric analysis. The lipase immobilization on the beads involved the functionalization with coupling agents, N-hydroxysulfosuccinimide sodium (NHS) and 1-ethyl-(3-dimethylaminopropyl) carbodiimide (EDC), and it possessed a high enzyme activity of 64 U. The overall esterification conversion of the prepared product was 78% at 60°C, and it attained conversions of 98% and 88% with commercially available lipozyme and novozyme, respectively, under similar experimental conditions.