A study on effect of hydrogen reduction reaction on the initial stage of Ni electrodeposition using EQCM

Electrochemical deposition of nickel targets from aqueous electrolytes for medical radioisotope production in accelerators: a review

This paper reviews reported methods of the electrochemical deposition of nickel layers which are used as target materials for accelerator production of medical radioisotopes. The review focuses on the electrodeposition carried out from aqueous electrolytes. It describes the main challenges related to the preparation of suitable Ni target layers, such as work with limited amounts of expensive isotopically enriched nickel; electrodeposition of sufficiently thick, smooth and free of cracks layers; and recovery of unreacted Ni isotopes from the irradiated targets and from used electrolytic baths.

Transition from amorphous to crystalline state for nickel electrodeposited from an ionic liquid

The microstructure of metallic nickel electrodeposited from an ionic liquid onto a copper substrate may be tuned and transition from amorphous to crystalline state can be achieved by regulating water content in the bath.

NUCLEATION AND STRUCTURAL PROPERTIES OF NICKEL FILMS ELECTRODEPOSITED FROM, CHLORIDE AND SULFATE BATHS

Nickel films electrodeposited from chloride and sulfate baths at pH 3.8 have been investigated. The influence of the plating baths on the electrochemical growth and the characteristics of nickel were studied by means of cyclic voltammetry, potentiostatic steps (chronoamperometry), atomic force microscopy (AFM) and X-ray diffraction (XRD) techniques. The electrocrystallization mechanism was analyzed using the Scharifker and Hills model. The nucleation mechanism was found to be progressive at -1.1 V versus SCE, while at elevated overpotentials (more negative than -1.2 V versus SCE) instantaneous nucleation behavior was obtained. AFM characterization of the deposits indicated that the baths composition influences greatly the morphology of the deposits. XRD analysis indicated polycrystalline growth of the Ni film with a preferred (111) orientation with the fcc structure for both baths. The Ni crystallite sizes are 19–31 nm for the sulfate bath and 14–33 nm for the chloride one.