Firmness of pressure-induced casein and whey protein gels modulated by holding time and rate of pressure release

Study on potential antigenicity and functional properties of whey protein treated by high hydrostatic pressure based on structural analysis

High hydrostatic pressure (HHP) is extensively utilized in the field of food processing due to its remarkable ability to preserve the freshness of food. The potential antigenicity of β-lactoglobulin (β-LG) in whey protein isolate (WPI, 3%) treated by HHP was detected by enzyme linked immunosorbent assay (ELISA) using monoclonal antibodies. Furthermore, the impact of pressure-induced structural alterations on the emulsification properties and antioxidant activity of WPI was investigated. The findings revealed that pressures exceeding 300 MPa resulted in molecular aggregation, the formation of inter-molecular disulfide bonds, and an increase in surface hydrophobicity (H0). The percentage of β-sheet decreased along with the pressure. The results showed the increment of α-helix and β-turn with pressure. ELISA demonstrated a significant reduction in the antigenicity of β-LG following HHP treatment (100-600 MPa), with a slight recovery observed at 300 MPa. These spatial structural modifications led to the unfolding of the β-LG molecule, thereby enhancing its digestibility. Moreover, HHP treatment substantially improved the antioxidant properties, with the exposure to hydrophobic amino acids contributing to increased antioxidant properties and emulsion stability.

A Comprehensive Review of Food Hydrogels: Principles, Formation Mechanisms, Microstructure, and Its Applications

Food hydrogels are effective materials of great interest to scientists because they are safe and beneficial to the environment. Hydrogels are widely used in the food industry due to their three-dimensional crosslinked networks. They have also attracted a considerable amount of attention because they can be used in many different ways in the food industry, for example, as fat replacers, target delivery vehicles, encapsulating agents, etc. Gels-particularly proteins and polysaccharides-have attracted the attention of food scientists due to their excellent biocompatibility, biodegradability, nutritional properties, and edibility. Thus, this review is focused on the nutritional importance, microstructure, mechanical characteristics, and food hydrogel applications of gels. This review also focuses on the structural configuration of hydrogels, which implies future potential applications in the food industry. The findings of this review confirm the application of different plant- and animal-based polysaccharide and protein sources as gelling agents. Gel network structure is improved by incorporating polysaccharides for encapsulation of bioactive compounds. Different hydrogel-based formulations are widely used for the encapsulation of bioactive compounds, food texture perception, risk monitoring, and food packaging applications.

Chemical interactions among caseins during rennet coagulation of milk

Rennet milk curds were prepared under 4 different temperature and acidity conditions. The development of different types of inter-protein chemical bonds (disulfide, hydrophobic, electrostatic, hydrogen, and calcium bridges) was monitored for 60 min after curd cutting. Hydrophobic inter-protein interactions originally present in casein micelles in milk were substituted by electrostatic, hydrogen, and calcium bonds throughout the curd curing period. Disulfide bonds were not disturbed by the experimental conditions employed in the study, remaining at a constant level in all studied treatments. Acidification of curds increased the availability of soluble ionic calcium, increasing the relative proportion of calcium bridges at the expense of electrostatic-hydrogen bonds. Although pH defined the nature of the interactions established among proteins in curd, temperature modified the rate at which such bonds were formed.

Structure and shelf stability of milk protein gels created by pressure-assisted enzymatic gelation

In this work, pressure-assisted enzymatic gelation was applied to milk proteins, with the goal of enhancing the structure and stability of pressure-created milk protein gels. High-pressure processing (HPP) at 600 MPa, 3 min, and 5°C was applied to milk protein concentrate (MPC) samples of 12.5% protein concentration, both in the absence and in the presence of calf chymosin [up to 60 IMCU (international milk-clotting units)/kg of milk] or camel chymosin (up to 45 IMCU/kg of milk). Gel hardness, water-holding capacity, and degree of proteolysis were used to assess network strength and shelf stability. The processing trials and all measurements were conducted in triplicate. Statistical analyses of the data were performed by ANOVA, at a 95% confidence level. After HPP treatment, we observed significant structural changes for all samples. Pressurization of MPC, with or without chymosin addition, led to extensive protein aggregation and network formation. The strength of HPP-created milk protein gels without chymosin addition, as measured by the elastic modulus (G'), had a value of 2,242 Pa. The value of G' increased with increasing chymosin concentration, reaching as high as 4,800 Pa for samples with 45 IMCU/kg of camel chymosin. During 4 wk of refrigerated storage, the HPP and chymosin MPC gels maintained higher gel hardness and better structural stability compared with HPP only (no chymosin) MPC gels. The water-holding capacity of the gels without chymosin remained at 100% during 28 d of refrigerated storage. The HPP and chymosin MPC gels had a lower water-holding capacity (91-94%) than the HPP-only counterparts, but their water-holding capacity did not decrease during storage. Overall, these findings demonstrate that controlled, fast structural modification of high-concentration protein systems can be obtained by HPP-assisted enzymatic treatment, and the created gels have a strong, stable network. This study provides insights into the possibility of using HPP for the development of milk-protein-based products with novel structures and textures and long refrigerated shelf life, along with the built-in safety imparted by the HPP treatment.

High-pressure structuring of milk protein concentrate: Effect of pH and calcium

In this study, we investigated the effect of pH and calcium on the structural properties of gels created by high-pressure processing (HPP, 600 MPa, 5°C, 3 min) of milk protein concentrate (MPC, 12.5% protein). The pH level of the MPC was varied between 6.6 and 5.1 by adding glucono-δ-lactone (GDL), and the calcium content was varied from 24 to 36 mg of Ca/g of protein by adding calcium chloride. The rheological properties and microstructure of the pressure-treated MPC were assessed. The pressurization treatments and analytical testing were conducted in triplicate. Data were analyzed statistically using one-way ANOVA with Tukey's honestly significant difference post hoc tests. A pressurization time of 3 min was sufficient to induce gel formation in MPC at pH 6.6, so it was used throughout the study. Adjusting either pH or calcium affected the structure of the HPP-created milk protein gels, likely by influencing electrostatic interactions and shifting the calcium-phosphate balance. Gels were formed after pressurization of MPC at pH above 5.3, and increasing the pH from 5.3 to 6.6 resulted in stronger gels with higher values of elastic moduli (G'). At neutral pH (6.6), adding calcium to MPC further increased G'. Scanning electron microscopy showed that reducing pH or adding calcium resulted in more porous, aggregated microstructures. These findings demonstrate the potential of HPP to create a variety of structures using MPC, facilitating a new pathway from dairy protein ingredients to novel, gel-based, high-protein foods, such as puddings or on-the-go protein bars.

Effect of Soluble Solids and High Pressure Treatment on Rheological Properties of Protein Enriched Mango Puree

The effects of high pressure treatment on the rheological properties of protein enriched mango puree were evaluated. In the first part, the original soluble solids in mango puree (28° Brix) was lowered to 26, 23 and 20° Brix, and each was supplemented with 2, 5 and 8% of whey protein to assess the influence of added protein. The samples were then evaluated by dynamic rheology. Pressure treatment resulted in a progressive increase in elastic (G') and viscous modulii (G″) as well as complex viscosity (η*). Values of G' were higher than G″ demonstrating that the product behaved more like a gel. Additional tests were carried out by simultaneously varying protein and soluble solids contents, and keeping the total solids at 28%. In this case, the effects of pressure levels and holding times were similar to previous results. However, the positive effects of higher protein were negated by the negative effects of lower soluble solids, resulting in an overall decreasing effect on rheology. The developed models effectively predicted the combined influence of protein and soluble solid concentrations on rheological parameters (R2 > 0.85). Sensory evaluation of 2% and 5% protein supplemented and pressure treated (500 MPa/3 min) mango puree yielded acceptable sensory qualities, resulting in a product with enriched protein content.

Influence of pressure release rate and protein concentration on the formation of pressure-induced casein structures

The formation of pressure-induced casein structures (600 MPa for 30 min at 30°C) was investigated for different pressure release rates (20 to 600 MPa min−1) and casein contents (1 to 15 g/100 ml). Structures from liquid (sol) to solid (gel) were observed. The higher the protein content and the pressure release rate, the higher was the dynamic viscosity. A firm gel was built up at a casein content of 7 g/100 ml for a pressure release rate of 600 MPa min−1, while lower release rates resulted in less firm gels (200 MPa min−1) or liquid structures (20 MPa min−1). In a 5 g/100 ml casein solution and at a pressure release rate of 600 MPa min−1, casein aggregates were generated which were built from smaller casein particles with a larger hydrodynamic diameter and higher voluminosity than in the untreated solution. After a slow release rate casein micelles had a smaller hydrodynamic diameter and a lower voluminosity, but were similar in shape and diameter as compared with the micelles in solution before high pressure treatment.

Functional Improvement of Milk Whey Proteins Induced by High Hydrostatic Pressure

High pressure is emerging as a new processing technology that produces particular changes in the molecular structure of proteins and thus gives rise to new properties inaccessible via conventional methods of protein modification. This review deals with the main effects of high hydrostatic pressure on the physicochemical characteristics of milk whey proteins and how modifications in their structural properties contribute to functionality. In this paper the mechanism underlying pressure-induced changes in ss-lactoglobulin, a-lactabumin, and bovine serum albumin is explained, and related to functional properties such as gel-forming ability, emulsifying activity, or foaming capacity. The possibility of using high pressures to favor chemical reactions of proteins with other food components, such as carbohydrates, to produce novel molecules with new food uses is also considered.

Pressure-induced unfolding and aggregation of the proteins in whey protein concentrate solutions

Whey protein concentrate solutions (12% w/v, pH 6.65 +/- 0.05) were pressure treated at 800 MPa for 20-120 min and then examined using size exclusion chromatography (SEC), small deformation rheology, transmission electron microscopy, and various types of one-dimensional (1D) and two-dimensional (2D) polyacrylamide gel electrophoresis (PAGE). The pressure-treated samples showed a time-dependent loss of native whey proteins by SEC and 1D PAGE and a corresponding increase in non-native proteins and protein aggregates of different sizes. These aggregates altered the viscosity and opacity of the samples and were shown to be cross-linked by intermolecular disulfide bonds and by noncovalent interactions using 1D PAGE [alkaline (or native), sodium dodecyl sulfate (SDS), and SDS of reduced samples (SDS(R))] and 2D PAGE (native:SDS and SDS:SDS(R)). The sensitivity of the major whey proteins to pressure was in the order beta-lactoglobulin B (beta-LG B) > beta-LG A > bovine serum albumin (BSA) > alpha-lactalbumin (alpha-LA), and the large internal hydrophobic cavity of beta-LG may have been partially responsible for its sensitivity to high-pressure treatments. It seemed likely that, at 800 MPa, the formation of a beta-LG disulfide-bonded network preceded the formation of disulfide bonds between alpha-LA or BSA and beta-LG to form multiprotein aggregates, possibly because the disulfide bonds of alpha-LA and BSA are less exposed than those of beta-LG either during or after pressure treatment. It may be possible that intermolecular disulfide bond formation occurred at high pressure and that hydrophobic association became important after the high-pressure treatment.