The technique of total body irradiation applied at the leszczyński memorial hospital

Dosimetric comparison of AP/PA and bilateral geometries for total body irradiation treatment

Total body irradiation (TBI) is an external radiotherapy technique. Its aim is to deliver a therapeutic dose uniformly within ± 10% of the absorbed dose to the prescription point. In the present study, the TBI technique was implemented in anterior/posterior (AP/PA), and bilateral geometry with photons from a 6 [Formula: see text] and 18 [Formula: see text] accelerator. The TBI technique was implemented on an Alderson Rando phantom at 312 [Formula: see text] source surface distance. During bilateral fraction, rice bags were applied as tissue compensators. To reduce the lung's absorbed dose to the acceptance level, in AP/PA geometry lung blocks made of Cerrobend were used. The required monitor unit (MU) for each fraction was calculated regarding depending on the prescribed dose and beam output. Gafchromic EBT₃ films were used for dosimetry between the phantom layers in eight selected points. It is demonstrated that dose uniformity for AP/PA geometry with 6 [Formula: see text] and 18 [Formula: see text] photons was within ± 10%. In contrast, for the bilateral geometry the dose uniformity was not acceptable for both studied energies; However, the results for 18 [Formula: see text] were better than those for 6 [Formula: see text]. Dose accuracy for all measurements was within ± 5 of the prescribed dose. The absorbed dose to the lungs was successfully reduced using the lung blocks. By combining different therapeutic geometries and energies over six fractions, the results of uniformity and accuracy of dose delivery could be improved. It is concluded that the introduced TBI method achieved good dose accuracy and acceptable dose uniformity. Lungs absorbed dose was lower than 10 [Formula: see text] using the lungs blocks. Based on these results, the TBI technique can now be implemented in radiotherapy at Tehran's Imam Hospital. The approach developed in the present study can be used and adapted to match with the conditions at other hospitals.

Comparison of different TBI techniques in terms of dose homogeneity - review study

Total body irradiation (TBI) is a kind of external beam radiotherapy, used in conjunction with chemotherapy with the purpose of immunosuppression. Since the target in TBI is the whole body, so achieving uniform dose distribution throughout the entire body during TBI is necessary. As recommended by AAPM dose variation must be within ±10% of the prescription dose. With the evidences from literature there is limited substantiation to consider a treatment method better than others, but with regard to the size of the treatment room, workload of the radiotherapy department and prevalent technology used within each treatment department it is recommended to make the suitable and optimum method in each department. In this work, a review study was performed on different TBI techniques with the purpose of assessment and comparison of dose distribution homogeneity in these methods.

An Evidence-Based Review of Total Body Irradiation

The purpose of this literature review is to investigate clinical treatment methods of total body irradiation within the context of a clinical department adopting a paediatric cohort with no existing technique. An extensive review of the literature was conducted using PubMed, Science Direct, Google Scholar, and Clinicians Knowledge Network. Articles were limited to nonhelical tomotherapy, nonparticle therapies, and those using hyperfractionated regimes. Total marrow irradiation was excluded because of national treatment and trial limitations. Of the numerous patient positioning methods present within the literature, the most comfortable and reproducible positioning methods for total body irradiation include both supine and the supine and/or prone combination. These positions increased stability and patient comfort during treatment, while also facilitating computed tomography data acquisition at the simulation stage. Ideally, dose calculations should be performed using a three-dimensional treatment planning system and quality assurance procedures that include in vivo dosimetry measurements. The available literature also suggests inhomogeneity correction factors and intensity modulation are superior to conventional open field techniques and should be implemented within developing protocols. Dynamic machine dose modulation is suggested to reduce department impact, removing the need for tissue compensators and accessory shielding devices, while providing significant improvements to treatment time and dose accuracy. Further long-term survival and intensity modulation studies are warranted, including direct comparisons of both dose modulation and treatment efficiency.

Dose distribution homogeneity in two TBI techniques-Analysis of 208 irradiated patients conducted in Stanislaw Leszczynski Memorial Hospital, Katowice

BACKGROUND

To analyze and compare dose distribution homogeneity in selected points (especially in the chest wall region) for patients irradiated with two different TBI techniques to achieve a uniform total dose (excluding lungs area) specified in the range of 11.4-14.0 Gy.

MATERIAL AND METHODS

From August 2000 to December 2009, a group of 158 patients was treated by the use of 15 MV photon irradiation consisting of six fractions: four opposed lateral and two anterior-posterior/posterior-anterior (AP/PA). Patients were irradiated with the fraction dose of 2 Gy twice a day for 3 consecutive days. The prescribed dose to PC point (specified at intersection of the beam axis with the mid-plane of the patient irradiated laterally) was 12 Gy. Since January 2010 until closing the study, another group of 50 patients was treated according to a modified protocol. The treatment was carried out in six lateral fractions only, twice a day, for three following days and a lateral lung shield was used for a part of total irradiation time. The measurements of doses in 20 selected points of patient's body were carried out by means of MOSFET detectors.

RESULTS

The modified TBI technique allows to achieve an expected homogenous dose in the points of interest similar to that obtained by using the initial protocol. The calculated and measured in vivo doses met the specified range of 11.4-14 Gy for both applied TBI protocols.

CONCLUSIONS

Our results indicate that for all patients the homogenous dose distribution in the specified range was achieved.