Progress on Electrocatalysts of Hydrogen Evolution Reaction Based on Carbon Fiber Materials

Selenium-transition metal supported on a mixture of reduced graphene oxide and silica template for water splitting

Exploration of economical, highly efficient, and environment friendly non-noble-metal-based electrocatalysts is necessary for hydrogen and oxygen evolution reactions (HER and OER) but challenging for cost-effective water splitting. Herein, metal selenium nanoparticles (M = Ni, Co & Fe) are anchored on the surface of reduced graphene oxide and a silica template (rGO-ST) through a simple one-pot solvothermal method. The resulting electrocatalyst composite can enhance mass/charge transfer and promote interaction between water molecules and electrocatalyst reactive sites. NiSe2/rGO-ST shows a remarkable overpotential (52.5 mV) at 10 mA cm-2 for the HER compared to the benchmark Pt/C E-TEK (29 mV), while the overpotential values of CoSeO3/rGO-ST and FeSe2/rGO-ST are 246 and 347 mV, respectively. The FeSe2/rGO-ST/NF shows a low overpotential (297 mV) at 50 mA cm-2 for the OER compared to RuO2/NF (325 mV), while the overpotentials of CoSeO3-rGO-ST/NF and NiSe2-rGO-ST/NF are 400 and 475 mV, respectively. Furthermore, all catalysts indicate negligible deterioration, indicating better stability during the process of HER and OER after a stability test of 60 h. The water splitting system composed of NiSe2-rGO-ST/NF||FeSe2-rGO-ST/NF electrodes requires only ∼1.75 V at 10 mA cm-2. Its performance is nearly close to that of a noble metal-based Pt/C/NF||RuO2/NF water splitting system.

WS2-WC-WO3 nano-hollow spheres as an efficient and durable catalyst for hydrogen evolution reaction

Transition metal dichalcogenides (TMDs), transition metal carbides (TMCs), and transition metal oxides (TMOs) have been widely investigated for electrocatalytic applications owing to their abundant active sites, high stability, good conductivity, and various other fascinating properties. Therefore, the synthesis of composites of TMDs, TMCs, and TMOs is a new avenue for the preparation of efficient electrocatalysts. Herein, we propose a novel low-cost and facile method to prepare TMD-TMC-TMO nano-hollow spheres (WS2-WC-WO3 NH) as an efficient catalyst for the hydrogen evolution reaction (HER). The crystallinity, morphology, chemical bonding, and composition of the composite material were comprehensively investigated using X-ray diffraction, Raman spectroscopy, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy. The results confirmed the successful synthesis of the WS2-WC-WO3 NH spheres. Interestingly, the presence of nitrogen significantly enhanced the electrical conductivity of the hybrid material, facilitating electron transfer during the catalytic process. As a result, the WS2-WC-WO3 NH hybrid exhibited better HER performance than the pure WS2 nanoflowers, which can be attributed to the synergistic effect of the W-S, W-C, and W-O bonding in the composite. Remarkably, the Tafel slope of the WS2-WC-WO3 NH spheres was 59 mV dec-1, which is significantly lower than that of the pure WS2 NFs (82 mV dec-1). The results also confirmed the unprecedented stability and superior electrocatalytic performance of the WS2-WC-WO3 NH spheres toward the HER, which opens new avenues for the preparation of low-cost and highly effective materials for energy conversion and storage applications.

PdZrO2/rGO-FTO as an effective modified anode and cathode toward methanol electro-oxidation and hydrogen evolution reactions

In the present work, Pd/rGO and PdZrO₂/rGO nanostructures were synthesized in a single step by hydrothermal method. Synthesized nanostructures containing 20 wt% Pd nanoparticles were characterized and approved using Fourier-transform infrared spectroscopy, x-ray diffraction, field emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, and transmission electron microscopy techniques. The performance of Pd and PdZrO₂hybridized with rGO as catalysts were investigated and compared in the process of hydrogen production by water electrolysis and also in the process of electricity generation by methanol oxidation in the fuel cell. The activity and stability of synthetic nanocatalysts were evaluated using cyclic voltammetry, LSV, and chronoamperometry. The results showed that the presence of ZrO₂in the nanostructure increases the current density and reduces the overvoltage of the catalytic process. For methanol oxidation reaction, PdZrO₂/rGO catalyst displays 92 mA cm^-2current density in alkaline media. For hydrogen evolution reaction, the Tafel slope of 52 mV dec^-1and overpotential of -0.198 V at the current density of 10 mA cm^-2were obtained in alkaline media. Also, due to high stability, this catalyst can be recommended as an optimal catalyst for industrial processes.

Enhanced Electrocatalytic Activity of Stainless Steel Substrate by Nickel Sulfides for Efficient Hydrogen Evolution

Water splitting is one of the efficient ways to produce hydrogen with zero carbon dioxide emission. Thus far, Pt has been regarded as a highly reactive catalyst for the hydrogen evolution reaction (HER); however, the high cost and rarity of Pt significantly hinder its commercial use. Herein, we successfully developed an HER catalyst composed of NiSx (x = 1 or 2) on stainless steel (NiSx/SUS) using electrodeposition and sulfurization techniques. Notably, the electrochemical active surface area(ECSA) of NiSx/SUS was improved more than two orders of magnitude, resulting in a considerable improvement in the electrochemical charge transfer and HER activity in comparison with stainless steel (SUS). The long-term HER examination by linear scan voltammetry (LSV) confirmed that NiSx/SUS was stable up to 2000 cycles.

NiCo2O4 Nano-/Microstructures as High-Performance Biosensors: A Review

Non-enzymatic biosensors based on mixed transition metal oxides are deemed as the most promising devices due to their high sensitivity, selectivity, wide concentration range, low detection limits, and excellent recyclability. Spinel NiCo2O4 mixed oxides have drawn considerable attention recently due to their outstanding advantages including large specific surface area, high permeability, short electron, and ion diffusion pathways. Because of the rapid development of non-enzyme biosensors, the current state of methods for synthesis of pure and composite/hybrid NiCo2O4 materials and their subsequent electrochemical biosensing applications are systematically and comprehensively reviewed herein. Comparative analysis reveals better electrochemical sensing of bioanalytes by one-dimensional and two-dimensional NiCo2O4 nano-/microstructures than other morphologies. Better biosensing efficiency of NiCo2O4 as compared to corresponding individual metal oxides, viz. NiO and Co3O4, is attributed to the close intrinsic-state redox couples of Ni3+/Ni2+ (0.58 V/0.49 V) and Co3+/Co2+ (0.53 V/0.51 V). Biosensing performance of NiCo2O4 is also significantly improved by making the composites of NiCo2O4 with conducting carbonaceous materials like graphene, reduced graphene oxide, carbon nanotubes (single and multi-walled), carbon nanofibers; conducting polymers like polypyrrole (PPy), polyaniline (PANI); metal oxides NiO, Co3O4, SnO2, MnO2; and metals like Au, Pd, etc. Various factors affecting the morphologies and biosensing parameters of the nano-/micro-structured NiCo2O4 are also highlighted. Finally, some drawbacks and future perspectives related to this promising field are outlined.

Ni(OH)2 -WP Hybrid Nanorod Arrays for Highly Efficient and Durable Hydrogen Evolution Reactions in Alkaline Media

The development of efficient non-noble-metal hydrogen evolution electrocatalysts in alkaline media is crucial for sustainable, ecofriendly production of H₂ through water electrolysis. An alkaline hydrogen evolution reaction (HER) catalyst composed of Ni(OH)₂ -decorated thungsten phosphide (WP) nanorod arrays on carbon paper was synthesized by thermal evaporation and electrodeposition. This hybrid catalyst displayed outstanding HER activity and required a low overpotential of only 77 mV to obtain a current density of 10 mA cm^-2 and a Tafel slope of 71 mV dec^-1 . The hybrid catalyst also showed long-term electrochemical stability, maintaining its activity for 18 h. This improved HER efficiency was attributed to the synergetic effect of WP and Ni(OH)₂ : Ni(OH)₂ effectively lowers the energy barrier during water dissociation and also provides active sites for hydroxyl adsorption, whereas WP adsorbs hydrogen intermediates and efficiently produces H₂ gas. This interfacial cooperation offers not only excellent HER catalytic activity but also new strategies for the fabrication of effective non-noble-metal-based electrocatalysts in alkaline media.