Catalytic oxidation of diesel soot particulates over Ag/LaCoO3 perovskite oxides in air and NOx

Improving the Oxygen Evolution Reaction Kinetics in Zn-Air Battery by Iodide Oxidation Reaction

Zinc-air batteries (ZABs) have garnered considerable attention as a highly promising contender in the field of energy storage and conversion. Nevertheless, their performance is considerably impeded by the proliferation of dendrites on the Zinc anode and the slow kinetics of the redox reaction on the air cathode. Herein, taking Ag30%@LaCoO3 (Ag30%@LCO) heterojunction catalyst as the cathode, it is demonstrated that adding KI additives to the alkaline electrolyte can not only enhance the oxygen electrocatalytic reaction but also inhibit the formation of zinc anode dendrites, thereby achieving a comprehensive improvement in the performance of ZABs. Under the action of the KI additive, the optimized Ag30%@LCO catalyst shows a decreased overpotential from 460 to 220 mV at j = 10 mA cm-2, while the assembled ZAB shows reduced charging potential (1.8 V), and long cycle stability (180 h). Furthermore, the morphology characterization results indicate a reduction in dendrites on the Zn anode. Both experimental and calculated results indicate that the presence of I- as a reaction modifier alters the trajectory of the conventional oxygen evolution reaction, resulting in a more thermodynamically favorable pathway. The introduction of KI additives as electrolytes provides a straightforward approach to developing comprehensively improved ZABs.

Insights into the interface of NiCo2O4 spinel /LaCoO3 perovskite nano-composite for CO and soot oxidation

In the quest for the development of thermally stable, highly active and low-cost catalysts for use in catalyzed diesel particulate filter, nano-composites are new areas of research. Therefore, we reported the easy synthesis of spinel NiCo2O4/perovskite LaCoO3 nano-composite, and its individual oxides NiCo2O4 and LaCoO3 for comparison. The detailed insights into the physio-chemical characteristics of formed NiCo2O4/ LaCoO3 nano-composite were done based on various characterization analysis such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR), N2 physiosorption, scanning electron microscopy-energy dispersive spectroscopy (SEM-EDX), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The characterization analysis of NiCo2O4/LaCoO3 revealed the successful formation of a chemical interface possessing strong interfacial interaction, resulting in desirable physicochemical characteristics such as small crystallite size, abundant mesoporosity, high specific surface area and activation of surface lattice oxygen. Owing to the desirable characteristics, the activity results over NiCo2O4/LaCoO3 nano-composite showed the excellent CO oxidation performance and high soot oxidation activity, recyclability and thermal stability. This work mainly attempts to emphasize the effectiveness of the facile, inexpensive and conventionally used precipitation method for the successful formation of highly efficient nano-composites.

Understanding the effects of A-site Ag-doping on LaCoO3 perovskite for NO oxidation: Structural and magnetic properties

The partial substitution of A-site in perovskites is a major strategy to enhance the catalytic oxidation activity. This study explores the use of silver (Ag) to partially replace the lanthanum (La) ion at the A-site in LaCoO3 perovskite, investigating the role of Ag in the ABO3 perovskite structure, elucidating the nitric oxide (NO) oxidation mechanism over La1-xAgxCoO3 (x = 0.1-0.5) perovskites. La0.7Ag0.3CoO3 with an Ag-doping amount of 0.3, exhibited the highest NO oxidation activity of 88.5% at 275 °C. Characterization results indicated that Ag substitution enhanced the perovskite, maintaining its original phase structure, existing in the form of a mixture of Ag0 and Ag+ in the La1-xAgxCoO3 (x = 0.1-0.5) perovskites. Notably, Ag substitution improved the specific surface area, reduction performance, Co3+, and surface adsorption oxygen content. Additionally, the study investigated the relationship between magnetism and NO oxidation from a magnetism perspective. Ag-doping strengthened the magnetism of La-Ag perovskite, resulting in stronger adsorption of paramagnetic NO. This study elucidated the NO oxidation mechanism over La-Ag perovskite, considering structural and magnetic properties, providing valuable insights for the subsequent development and industrial application of high oxidation ability perovskite catalysts.

Soot Erased: Catalysts and Their Mechanistic Chemistry

Soot formation is an inevitable consequence of the combustion of carbonaceous fuels in environments rich in reducing agents. Efficient management of pollution in various contexts, such as industrial fires, vehicle engines, and similar applications, relies heavily on the subsequent oxidation of soot particles. Among the oxidizing agents employed for this purpose, oxygen, carbon dioxide, water vapor, and nitrogen dioxide have all demonstrated effectiveness. The scientific framework of this research can be elucidated through the following key aspects: (i) This review situates itself within the broader context of pollution management, emphasizing the importance of effective soot oxidation in reducing emissions and mitigating environmental impacts. (ii) The central research question of this study pertains to the identification and evaluation of catalysts for soot oxidation, with a specific emphasis on ceria-based catalysts. The formulation of this research question arises from the need to enhance our understanding of catalytic mechanisms and their application in environmental remediation. This question serves as the guiding principle that directs the research methodology. (iii) This review seeks to investigate the catalytic mechanisms involved in soot oxidation. (iv) This review highlights the efficacy of ceria-based catalysts as well as other types of catalysts in soot oxidation and elucidate the underlying mechanistic strategies. The significance of these findings is discussed in the context of pollution management and environmental sustainability. This study contributes to the advancement of knowledge in the field of catalysis and provides valuable insights for the development of effective strategies to combat air pollution, ultimately promoting a cleaner and healthier environment.

Soot combustion over CeO2 catalyst: the influence of biodiesel impurities (Na, K, Ca, P) on surface chemical properties

This work assessed the impact of biodiesel impurities on CeO2 catalyst for soot combustion via soot-TPO experiments. The results showed that Na- and K-doped catalysts were assisted for soot combustion, while Ca- and P-doped catalysts had a negative effect. N2 adsorption-desorption and XRD results indicated that doping biodiesel impurities led to smaller surface area by blocking small pores. Surface chemical properties are suggested as major reasons for promoting soot combustion by means of XPS, H2-TPR, and O2-TPD. Na- and K-doped catalysts showed stronger redox ability and surface lattice oxygen mobility, poorly for Ca- and P-doped catalysts. Interestingly, a large number of surface oxygen species were observed on P-doped catalyst and it enhanced the ignition of bio soot. In the presence of NO, surface chemical properties including NOx storage/release capacity and NO oxidation ability were characterized by NO-adsorption DRIFTS, NO-TPO and NOx-desorption DRIFTS, alkali-doped catalyst with excellent NOx storage capacity that can release active oxygen species and gaseous NO2 accelerate heterogeneous soot combustion, and the poor NO conversion ability to NO2 that weakens the promotion effect of soot combustion. Particularly in the existence of P, the promotion effect of soot elimination in NO + O2 was further weakened by the reason of poor NOx storage capacity and NO oxidation ability.

Synthesis of a CeO2/Co3O4 catalyst with a remarkable performance for the soot oxidation reaction

A highly active catalyst based on CeO₂/Co₃O₄ for soot oxidation at low temperatures with complete selectivity toward CO₂.

Physico-chemical properties and catalytic activity of the sol-gel prepared Ce-ion doped LaMnO3 perovskites

Ce-doped LaMnO₃ perovskite ceramics (La_1−xCe_xMnO₃) were synthesized by sol-gel based co-precipitation method and tested for the oxidation of benzyl alcohol using molecular oxygen. Benzyl alcohol conversion of ca. 25–42% was achieved with benzaldehyde as the main product. X-ray diffraction (XRD), thermogravimetric analysis (TGA), BET surface area, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (H₂-TPR), temperature-programmed oxidation (O₂-TPO), FT-IR and UV-vis spectroscopic techniques were used to examine the physiochemical properties. XRD analysis demonstrates the single phase crystalline high purity of the perovskite. The Ce-doped LaMnO₃ perovskite demonstrated reducibility at low-temperature and higher mobility of surface O₂-ion than their respective un-doped perovskite. The substitution of Ce³⁺ ion into the perovskite matrix improve the surface redox properties, which strongly influenced the catalytic activity of the material. The LaMnO₃ perovskite exhibited considerable activity to benzyl alcohol oxidation but suffered a slow deactivation with time-on-stream. Nevertheless, the insertion of the A site metal cation with a trivalent Ce³⁺ metal cation led to an enhanced in catalytic performance because of atomic-scale interactions between the A and B active site. La_0.95Ce_0.05MnO₃ catalyst demonstrated the excellent catalytic activity with a selectivity of 99% at 120 °C.