Covalent organic frameworks as heterogeneous catalysts

Covalent organic framework-hybridized Ag nanoparticles as SERS substrate for highly sensitive detection of DNA bases

Currently, research in the development of high-performance sensing platforms has increased to fulfill the needs of analysis and detection. In this study, we developed a novel type of surface-enhanced Raman scattering (SERS) chip composed of a covalent organic framework (COF)-silver nanoparticles (AgNPs) nanocomposite, and this nanocomposite was fabricated by a one-step method of ultrasonically mixing the obtained COF and AgNPs. The fabricated chip exhibited high sensitivity and repeatable SERS effects. Practical application results showed that the chip was highly sensitive and reliable and capable of detecting DNA bases (adenine) to fit an equation in the range from 0.01 pM to 1 nM, with an R-square of 0.97253 and a detection limit of ~0.026 pM (signal-to-noise ratio (S/N) = 3). Therefore, the proposed SERS system has potential applications in biological assays.

Constructing Heptazine-COF@TiO2 Heterojunction Photocatalysts for Efficient Photodegradation of Acetaminophen under Visible Light

Constructing heterojunction photocatalysts are widely applied to boost the photocatalytic activity of materials. Here, a novel covalent organic framework (COF) material with heptazine units was developed and hybridized with TiO2 nano particles (NPs) to fabricate the Heptazine-COF@TiO2 photocatalysts for acetaminophen (AAP) photodegradation. The successfully assembled heptazine unit endows the Heptazine-COF with outstanding semiconductor property (optical bandgap is 2.53 eV). The synthesized Heptazine-COF@TiO2 hybrids is proved to have the heterojunction structure with high visible light activity and fast charge-carrier mobility, and exhibits better performance in photodegradation of AAP under visible light. The excellent photodegradation efficiency (rate constant: 0.758 min-1) and high reusability (rate constant: 0.452 min-1 in the 6th cycles) of the optimized sample outperform the traditional inorganic photocatalysts and other heterojunction photocatalysts. In addition, these photocatalysts present universal degradation activity for other dyes and antibiotics.

Covalent Organic Framework Impregnated with Silver and Copper Nanoparticles: An Advanced Approach for Catalytic Degradation of Organic Pollutants in Wastewater

In this study, we introduce an economically viable and scalable process for developing a novel covalent organic framework (COF), which is a cross-linked polymer. The resulting material, TzTFB-COF, is successfully functionalized with silver and copper nanoparticles, which show high adequacy in the degradation of nitroaromatic compounds (NACs). For the synthesis of TzTFB-COF, s-tetrazine diamine (Tz) and 1,3,5-triformylbenzene (TFB) are chosen as building blocks, which exhibit a high density of nitrogen-containing sites. TzTFB-COF shows good chemical and thermal stability (>300 °C). For functionalization of TzTFB-COF with silver and copper nanoparticles, a solution infiltration technique is used. The composite materials, i.e., Ag@TzTFB-COF and Cu@TzTFB-COF, have been characterized using various spectroscopic and analytical techniques, which show high activity, high selectivity, and excellent chemical and thermal stability up to 350 °C. The silver and copper contents of Ag@TzTFB-COF and Cu@TzTFB-COF are determined to be 9.6 and 12.4 wt % by inductively coupled plasma optical emission spectrometer (ICP-OES). The catalytic efficiency of the synthesized Ag@TzTFB-COF and Cu@TzTFB-COF materials is assessed in the context of catalyzing the hydrogenation of NACs. Experimental results reveal a remarkable catalytic performance when conducted in an aqueous medium, and notably, the materials demonstrate substantial potential for reusability across multiple catalytic cycles. The determined parameters for the catalytic hydrogenation reaction, i.e., the rate constants and Gibbs free energies, are found to be 0.0185 s-1 and 9.878 kJ/mol for Ag@TzTFB-COF and 0.0219 s-1 and 9.615 kJ/mol for Cu@TzTFB-COF. Thus, the catalytic reaction exhibits characteristics of endothermic, endergonic, and nonspontaneous nature.

Covalent Organic Framework-Supported Metallocene for Ethylene Polymerization

The loading of homogeneous catalysts with support can dramatically improve their performance in olefin polymerization. However, the challenge lies in the development of supported catalysts with well-defined pore structures and good compatibility to achieve high catalytic activity and product performance. Herein, we report the use of an emergent class of porous material-covalent organic framework material (COF) as a carrier to support metallocene catalyst-Cp2 ZrCl2 for ethylene polymerization. The COF-supported catalyst demonstrates a higher catalytic activity of 31.1×106  g mol-1  h-1 at 140 °C, compared with 11.2×106  g mol-1  h-1 for the homogenous one. The resulting polyethylene (PE) products possess higher weight-average molecular weight (Mw ) and narrower molecular weight distribution (Ð) after COF supporting, that is, Mw increases from 160 to 308 kDa and Ð drops from 3.3 to 2.2. The melting point (Tm ) is also increased by up to 5.2 °C. Moreover, the PE product possesses a characteristic filamentous microstructure and demonstrates an increased tensile strength from 19.0 to 30.7 MPa and elongation at break from 350 to 1400 % after catalyst loading. We believe that the use of COF carriers will facilitate the future development of supported catalysts for highly efficient olefin polymerization and high-performance polyolefins.

Sulfonic-acid-based lyotropic bicontinuous cubic polymer network for molecular-size-selective heterogeneous catalysis

A nanoporous, bicontinuous cubic, lyotropic liquid crystal polymer resin with sulfonic acid groups is presented that exhibits high catalytic activity and is capable of molecular-size-selective heterogeneous acid catalysis.

Application of Covalent Organic Frameworks (COFs) as Dyes and Additives for Dye-Sensitized Solar Cells (DSSCs)

Five Covalent Organic Frameworks (COFs) were synthesized and applied to Dye-Sensitized Solar Cells (DSSCs) as dyes and additives. These porous nanomaterials are based on cheap, abundant commercially available ionic dyes (thionin acetate RIO-43, Bismarck brown Y RIO-55 and pararosaniline hydrochloride RIO-70), and antibiotics (dapsone RIO-60) are used as building blocks. The reticular innovative organic framework RIO-60 is the most promising dye for DSSCs. It possesses a short-circuit current density (J_sc) of 1.00 mA/cm², an open-circuit voltage (V_oc) of 329 mV, a fill factor (FF) of 0.59, and a cell efficiency (η) of 0.19%. These values are higher than those previously reported for COFs in similar devices. This first approach using the RIO family provides a good perspective on its application in DSSCs as a dye or photoanode dye enhancer, helping to increase the cell's lifespan.

Covalent organic frameworks editing for efficient metallaphotoredox catalytic carbon–oxygen cross coupling of aryl halides with alcohols

Cross-coupling by dual metal/photoredox catalysis is attractive for producing valuable chemical building blocks, where the photoredox catalysts lay the foundations for an efficient and sustainable operation.

Microenvironment engineering of supported metal nanoparticles for chemoselective hydrogenation

Selective hydrogenation with supported metal catalysts widely used in the production of fine chemicals and pharmaceuticals often faces a trade-off between activity and selectivity, mainly due to the inability to adjust one factor of the active sites without affecting other factors. In order to solve this bottleneck problem, the modulation of the microenvironment of active sites has attracted more and more attention, inspired by the collaborative catalytic mode of enzymes. In this perspective, we aim to summarize recent advances in the regulation of the microenvironment surrounding supported metal nanoparticles (NPs) using porous materials enriched with organic functional groups. Insights on how the microenvironment induces the enrichment, oriented adsorption and activation of substrates through non-covalent interaction and thus determines the hydrogenation activity and selectivity will be particularly discussed. Finally, a brief summary will be provided, and challenges together with a perspective in microenvironment engineering will be proposed.

Immobilization of Ionic Liquid on a Covalent Organic Framework for Effectively Catalyzing Cycloaddition of CO2 to Epoxides

Transforming CO₂ into value-added chemicals has been an important subject in recent years. The development of a novel heterogeneous catalyst for highly effective CO₂ conversion still remains a great challenge. As an emerging class of porous organic polymers, covalent organic frameworks (COFs) have exhibited superior potential as catalysts for various chemical reactions, due to their unique structure and properties. In this study, a layered two-dimensional (2D) COF, IM4F-Py-COF, was prepared through a three-component condensation reaction. Benzimidazole moiety, as an ionic liquid precursor, was integrated onto the skeleton of the COF using a benzimidazole-containing building unit. Ionization of the benzimidazole framework was then achieved through quaternization with 1-bromobutane to produce an ionic liquid-immobilized COF, i.e., BMIM4F-Py-COF. The resulting ionic COF shows excellent catalytic activity in promoting the chemical fixation of CO₂ via reaction with epoxides under solvent-free and co-catalyst-free conditions. High porosity, the one-dimensional (1D) open-channel structure of the COF and the high catalytic activity of ionic liquid may contribute to the excellent catalytic performance. Moreover, the COF catalyst could be reused at least five times without significant loss of its catalytic activity.

β-Ketoenamine Covalent Organic Frameworks—Effects of Functionalization on Pollutant Adsorption

Water pollution due to global economic activity is one of the greatest environmental concerns, and many efforts are currently being made toward developing materials capable of selectively and efficiently removing pollutants and contaminants. A series of β-ketoenamine covalent organic frameworks (COFs) have been synthesized, by reacting 1,3,5-triformylphloroglucinol (TFP) with different C2-functionalized and nonfunctionalized diamines, in order to evaluate the influence of wall functionalization and pore size on the adsorption capacity toward dye and heavy metal pollutants. The obtained COFs were characterized by different techniques. The adsorption of methylene blue (MB), which was used as a model for the adsorption of pharmaceuticals and dyes, was initially evaluated. Adsorption studies showed that –NO₂ and –SO₃H functional groups were favorable for MB adsorption, with TpBd(SO₃H)₂-COF [100%], prepared between TFP and 4,4′-diamine- [1,1′-biphenyl]-2,2′-disulfonic acid, achieving the highest adsorption capacity (166 ± 13 mg g⁻¹). The adsorption of anionic pollutants was less effective and decreased, in general, with the increase in –SO₃H and –NO₂ group content. The effect of ionic interactions on the COF performance was further assessed by carrying out adsorption experiments involving metal ions. Isotherms showed that nonfunctionalized and functionalized COFs were better described by the Langmuir and Freundlich sorption models, respectively, confirming the influence of functionalization on surface heterogeneity. Sorption kinetics experiments were better adjusted according to a second-order rate equation, confirming the existence of surface chemical interactions in the adsorption process. These results confirm the influence of selective COF functionalization on adsorption processes and the role of functional groups on the adsorption selectivity, thus clearly demonstrating the potential of this new class of materials in the efficient and selective capture and removal of pollutants in aqueous solutions.

2D Microporous Covalent Organic Frameworks as Cobalt Nanoparticle Supports for Electrocatalytic Hydrogen Evolution Reaction

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers, which are considered to be excellent supports for metal nanoparticles (MNPs) due to their highly ordered structure, chemical tunability, and porosity. In this work, two novel ultra-microporous COFs, JUC−624 and JUC−625, with narrow pore size distribution have been synthesized and used for the confined growth of ultrafine Co nanoparticles (CoNPs) with high loading. In an alkaline environment, the produced materials were investigated as electrocatalysts for the hydrogen evolution reaction (HER). Electrochemical test results show that CoNPs@COFs have a Tafel slope of 84 mV·dec−1, an onset overpotential of 105 mV, and ideal stability. Remarkably, CoNPs@JUC−625 required only 146 mV of overpotential to afford a current density of 10 mA cm−2. This research will open up new avenues for making COF-supported ultrafine MNPs with good dispersity and stability for extensive applications.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Facile preparation of ultrafine Pd nanoparticles anchored on covalent triazine frameworks catalysts for efficient N-alkylation

The fabrication of stable and efficient catalysts for green and economic catalytic transformation is significant. Here, highly stable covalent triazine frameworks (CTF-1) were used as the supporting material for anchoring ultrafine Pd nanoparticles (NPs) via a facile impregnation process and a one-pot calcination-reduction strategy. The widespread dispersion of ultrafine Pd NPs was a result of the abundant high nitrogen-content triazine groups of CTF-1 that endowed the catalyst Pd@CTF-1 with high catalytic activity. The catalytic performance of Pd@CTF-1 was demonstrated by the one-pot N-alkylation of benzaldehyde with aniline (or nitrobenzene) under mild reaction conditions, and Pd@CTF-1 exhibited a wide range of general applicability for N-alkylation reactions. The reaction mechanism for the N-alkylation reaction was also studied in detail. In addition, the Pd@CTF-1 catalyst exhibited high thermal and chemical stability, maintaining good catalytic efficiency after multiple reaction cycles. This study provides new insights for the fabrication of organic supporting materials with highly dispersed active catalytic sites that can lead to excellent catalytic performance for efficient, economical, and green reactions.

Exploring the similarity of single-layer covalent organic frameworks using electronic structure calculations

Exploiting a similarity metric to classify COFs according to the degree of π-electron conjugation of their bridges.

Synthesis of phenol esters by direct C–H activation of aldehydes using a highly efficient and reusable copper-immobilized polyimide covalent organic framework (Cu@PI-COF)

In the present study, we report the design and fabrication of a thermally and chemically stable copper-based polyimide covalent organic framework (Cu@PI-COF) via a facile and straightforward synthetic approach for the oxidative esterification of aldehydes.

Multiscale Modeling Strategy of 2D Covalent Organic Frameworks Confined at an Air-Water Interface

Two-dimensional covalent organic frameworks (2D COFs) have attracted attention as versatile active materials in many applications. Recent advances have demonstrated the synthesis of monolayer 2D COF via an air-water interface. However, the interfacial 2D polymerization mechanism has been elusive. In this work, we have used a multiscale modeling strategy to study dimethylmethylene-bridged triphenylamine building blocks confined at the air-water interface to form a 2D COF via Schiff-base reaction. A synergy between the computational investigations and experiments allowed the synthesis of a 2D-COF with one of the linkers considered. Our simulations complement the experimental characterization and show the preference of the building blocks to be at the interface with a favorable orientation for the polymerization. The air-water interface is shown to be a key factor to stabilize a flat conformation when a dimer molecule is considered. The structural and electronic properties of the monolayer COFs based on the two monomers are calculated and show a semiconducting nature with direct bandgaps. Our strategy provides a first step toward the in silico polymerization of 2D COFs at air-water interfaces capturing the initial steps of the synthesis up to the prediction of electronic properties of the 2D material.

N-Heterocyclic Carbene Functionalized Covalent Organic Framework for Transesterification of Glycerol with Dialkyl Carbonates

The development of a heterogeneous catalyst through the combination of novel carrier and powerful catalytic active sites is of particular interest. Herein, the successful integration of an N-Heterocyclic carbene (NHC) moiety into a covalent organic framework (COF) was achieved by coupling 4,4′,4′′,4′′′-(pyrene-1,3,6,8-tetrayl) tetraaniline (PyTTA) and equimolar 4,7-bis(4-formylphenyl)-1-methyl-1H-benzimidazole (IM) and 2′3′5′6′-tetrafluoro-[1,1′:4′,1′′-terphenyl]-4,4′-dicarbaldehyde (4F) followed by ionization with 1-bromobutane (C4H9Br) and then deprotonation upon addition of a base. The resulting material exhibited promising heterogeneous catalytic activity towards transesterification reaction of glycerol with dialkyl carbonate. Moreover, good recyclability granted no substantial loss of activity upon five cycles. Combination of COFs and NHCs might synergize their characteristics, thus providing more possibilities for creating new patterns of catalytic reactivity.

Covalent Organic Frameworks: Synthesis, Properties and Applications-An Overview

Covalent Organic Frameworks (COFs) are an exciting new class of microporous polymers with unprecedented properties in organic material chemistry. They are generally built from rigid, geometrically defined organic building blocks resulting in robust, covalently bonded crystalline networks that extend in two or three dimensions. By strategically combining monomers with specific structures and properties, synthesized COF materials can be fine-tuned and controlled at the atomic level, with unparalleled precision on intrapore chemical environment; moreover, the unusually high pore accessibility allows for easy post-synthetic pore wall modification after the COF is synthesized. Overall, COFs combine high, permanent porosity and surface area with high thermal and chemical stability, crystallinity and customizability, making them ideal candidates for a myriad of promising new solutions in a vast number of scientific fields, with widely varying applications such as gas adsorption and storage, pollutant removal, degradation and separation, advanced filtration, heterogeneous catalysis, chemical sensing, biomedical applications, energy storage and production and a vast array of optoelectronic solutions. This review attempts to give a brief insight on COF history, the overall strategies and techniques for rational COF synthesis and post-synthetic functionalization, as well as a glance at the exponentially growing field of COF research, summarizing their main properties and introducing the numerous technological and industrial state of the art applications, with noteworthy examples found in the literature.

Predicting the bulk modulus of single-layer covalent organic frameworks with square-lattice topology from molecular building-block properties

Two-dimensional Covalent Organic Frameworks (2D COFs) have attracted a lot of interest because of their potential for a broad range of applications. Different combinations of their molecular building blocks can lead to new materials with different physical and chemical properties. In this study, the elasticity of different single-layer tetrabenzoporphyrin (H2-TBPor) and phthalocyanine (H2-Pc) based 2D COFs is numerically investigated using a density-functional based tight-binding approach. Specifically, we calculate the 2D bulk modulus and the equivalent spring constants of the respective molecular building-blocks. Using a spring network model we are able to predict the 2D bulk modulus based on the properties of the isolated molecules. This provides a path to optimize elastic properties of 2D COFs.

Dehydrative Formation of Isosorbide from Sorbitol over Poly(ionic liquid)-Covalent Organic Framework Hybrids

In this study, the covalent bonding of linear poly(ionic liquid)s (PILs) with covalent organic frameworks (COFs) was accessed by copolymerization of a vinyl-decorated COF with 4-vinylbenzyl chloride, followed by quaternization with tertiary amines. The resultant PIL-COF composite by anchoring a proper content of vinyl sites on the COF-based comonomer retains the crystallinity and porosity, thereby facilitating access of the reactants to the catalytic active sites. As a proof of concept, the dehydrative transformation of sorbitol into isosorbide was selected as a benchmark reaction, whose rate improved significantly in the presence of PIL-COF-0.33 compared with those of individual components and the mesoporous PIL counterpart due to uniform pore sizes and flexible linear catalytic chains. In addition, the hybrids bearing a chemical cross-linkage between PILs and COFs are robust, and PIL-COF-0.33 can be recovered and reused for 10 runs without significant reactivity loss. These findings provide the basis for a novel design concept for achieving both efficient and stable IL catalysis.

Global opportunities and challenges on net-zero CO2 emissions towards a sustainable future

Artistic representation of CO2 emissions from various sources into the atmosphere, and its consequence on the global climatic conditions.

Introducing reticular chemistry into agrochemistry

For survival and quality of life, human society has sought more productive, precise, and sustainable agriculture. Agrochemistry, which solves farming issues in a chemical manner, is the core engine that drives the evolution of modern agriculture. To date, agrochemistry has utilized chemical technologies in the form of pesticides, fertilizers, veterinary drugs and various functional materials to meet fundamental demands from human society, while increasing the socio-ecological consequences due to inefficient use. Thus, more useful, precise, and designable scaffolding materials are required to support sustainable agrochemistry. Reticular chemistry, which weaves molecular units into frameworks, has been applied in many fields based on two cutting-edge porous framework materials, namely metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). With flexibility in composition, structure, and pore chemistry, MOFs and COFs have shown increasing functionalities associated with agrochemistry in the last decade, potentially introducing reticular chemistry as a highly accessible chemical toolbox into agrochemical technologies. In this critical review, we will demonstrate how reticular chemistry shapes the future of agrochemistry in the fields of farm sensing, agro-ecological preservation and reutilization, agrochemical formulations, smart indoor farming, agrobiotechnology, and beyond.

Electroactive Covalent Organic Frameworks: Design, Synthesis, and Applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with tailorable compositions, porosities, functionalities, and intrinsic chemical stability. The incorporation of electroactive moieties in the structure transforms COFs into electroactive materials with great potential for energy-related applications. Herein, the recent advances in the design and use of electroactive COFs as capacitors, batteries, conductors, fuel cells, water-splitting, and electrocatalysis are addressed. Their remarkable performance is discussed and compared with other porous materials; hence, perspectives in the development of electroactive COFs are presented.

Applications of Dynamic Covalent Chemistry Concept towards Tailored Covalent Organic Framework Nanomaterials: A Review

Covalent organic frameworks (COFs) are a rapidly developing class of materials that has been of immense research interest during the last ten years. Numerous reviews have been devoted to summarizing the synthesis and applications of COFs. However, the underlying dynamic covalent chemistry (DCC), which is the foundation of COFs synthesis, has never been systematically reviewed in this context. Dynamic covalent chemistry is the practice of using thermodynamic equilibriums to molecular assemblies. This Critical Review will cover the state-of-the-art use of DCC to both synthesize COFs and expand the applications of COFs. Five synthetic strategies for COF synthesis are rationalized, namely: modulation, mixed linker/linkage, sub-stoichiometric reaction, framework isomerism, and linker exchange, which highlight the dynamic covalent chemistry to regulate the growth and to modify the properties of COFs. Furthermore, the challenges in these approaches and potential future perspectives in the field of COF chemistry are also provided.

Recent Progress in Metal-Free Covalent Organic Frameworks as Heterogeneous Catalysts

Covalent organic frameworks (COFs), connecting different organic units into one system through covalent bonds, are crystalline organic porous materials with 2D or 3D networks. Compared with conventional porous materials such as inorganic zeolite, active carbon, and metal-organic frameworks, COFs are a new type of porous materials with well-designed pore structure, high surface area, outstanding stability, and easy functionalization at the molecular level, which have attracted extensive attention in various fields, such as energy storage, gas separation, sensing, photoluminescence, proton conduction, magnetic properties, drug delivery, and heterogeneous catalysis. Herein, the recent advances in metal-free COFs as a versatile platform for heterogeneous catalysis in a wide range of chemical reactions are presented and the synthetic strategy and promising catalytic applications of COF-based catalysts (including photocatalysis) are summarized. According to the types of catalytic reactions, this review is divided into the following five parts for discussion: achiral organic catalysis, chiral organic conversion, photocatalytic organic reactions, photocatalytic energy conversion (including water splitting and the reduction of carbon dioxide), and photocatalytic pollutant degradation. Furthermore, the remaining challenges and prospects of COFs as heterogeneous catalysts are also presented.

Structural Engineering of Two-Dimensional Covalent Organic Frameworks for Visible-Light-Driven Organic Transformations

Covalent organic frameworks (COFs) emerging as a novel kind of visible light-responsive organic semiconductor have attracted extensive research attention in the field of photocatalytic organic transformations. However, the key parameters affecting their photocatalytic properties are still not clear. In this work, a series of [3 + 3] COFs with similar two-dimensional hexagonal structure but different compositions are synthesized and employed as model materials for investigating the key factors affecting the photocatalytic properties in the visible-light-driven reductive dehalogenation reaction and the aerobic cross-dehydrogenative coupling reaction. In comparison with -H and -CF₃, the -OH substituent in the aromatic ring could narrow the band gap of the COFs. The COFs with a triazine skeleton in the framework usually boost the photocatalytic activity, possibly because of the enhanced charge separation efficiency by the formation of a donor-acceptor domain. As a combined result of the narrow band gap, efficient charge separation, and high conductivity, the COF possessing both a -OH group and triazine skeleton shows the highest activity in the photocatalytic reductive dehalogenation reaction. Notably, COFs could be easily recovered and reused several times without the loss of crystallinity. Our primary results may shed light on the design of efficient COF-based semiconductors for photocatalytic organic transformations.

Phosphine-Based Covalent Organic Framework for the Controlled Synthesis of Broad-Scope Ultrafine Nanoparticles

In this work, a phosphine-based covalent organic framework (Phos-COF-1) is successfully synthesized and employed as a template for the confined growth of broad-scope nanoparticles (NPs). Ascribed to the ordered distribution of phosphine coordination sites in the well-defined pores, various stable and well-dispersed ultrafine metal NPs including Pd, Pt, Au, and bimetallic PdAuNPs with narrow size distributions are successfully prepared as determined by transmission electron microscopy, X-ray photoelectron spectroscopy, inductively coupled plasma, and powder X-ray diffraction analyses. It is also demonstrated that the as-prepared Phos-COF-1-supported ultrafine NPs exhibit excellent catalytic activities and recyclability toward the Suzuki-Miyaura coupling reaction, reduction of nitro-phenol and 1-bromo-4-nitrobenzene, and even tandem coupling and reduction of p-nitroiodobenzene. This work will open many new possibilities for preparing COF-supported ultrafine NPs with good dispersity and stability for a broad range of applications.

A covalent triazine framework as an oxidase mimetic in the luminol chemiluminescence system: application to the determination of the antioxidant rutin

It is found that a covalent triazine framework (CTF-1) (that was prepared from 1,4-dicyanobenzene) exhibits oxidase-like activity toward the oxidation of luminol with dissolved oxygen in alkaline condition to produce intense blue chemiluminescence (CL). The reaction follows Michaelis-Menten kinetics and shows strong specificity for luminol. Reactive oxygen species including ¹O₂, ^•OH and O₂^•- are testified to be involved in the reaction and responsible for the CL. The reaction was applied to the determination of the radical-scavenging activity of antioxidants, with rutin, kaempferol and ferulic acid serving as model scavengers. A sensitive CL method was developed for the determination of rutin based on its inhibitory effect on the reaction. The CL system gave a linear response to the concentration of rutin in the range of 0.03-0.25 μmol·L^-1 with a limit of detection of 0.015 μmol·L^-1. The practicability of the method was demonstrated by successful determination of rutin in tablets and in Flos Sophorae Immaturus. Graphical Abstract.