Synergistic integration of metallic Bi and defects on BiOI: Enhanced photocatalytic NO removal and conversion pathway

Micro-Spherical BiOI Photocatalysts for Efficient Degradation of Residual Xanthate and Gaseous Nitric Oxide

BiOI microspheres were synthesized using the solvothermal method for the degradation of residual xanthate and gaseous nitric oxide (NO) under visible light irradiation. The as-prepared BiOI nanomaterials were then characterized using various technologies, including XRD, FE-SEM, TEM, UV-Vis DRS, and XPS. The photodegradation results show that the removal efficiency of isobutyl sodium xanthate can reach 98.08% at an initial xanthate concentration of 120 mg/L; that of NO is as high as 96.36% at an inlet NO concentration of 11 ppm. Moreover, the effects of operational parameters such as catalyst dosage, initial xanthate concentration, and pH value of wastewater on the removal of xanthate were investigated. The results of scavenging tests and full-spectrum scanning indicate that ·O2- radicals are the main active species in xanthate degradation, and peroxide xanthate is an intermediate. The reusability of BiOI was explored through cyclic experiments. Furthermore, the reaction path and the mechanism of NO removal using BiOI were analyzed, and the main active species was also ·O2-. It is concluded that BiOI photocatalysts have high potential for wastewater treatment and waste gas clean-up in the mineral industry.

Recent progress on bismuth-based light-triggered antibacterial nanocomposites: Synthesis, characterization, optical properties and bactericidal applications

Bacterial infections pose a seriously threat to the safety of the environment and human health. In particular, the emergence of drug-resistant pathogens as a result of antibiotic abuse and high trauma risk has rendered conventional therapeutic techniques insufficient for treating infections by these so-called "superbugs". Therefore, there is an urgent need to develop highly efficient and environmentally-friendly antimicrobial agents. Bismuth-based nanomaterials with unique structures and physicochemical characteristics have attracted considerable attention as promising antimicrobial candidates, with many demonstratingoutstanding antibacterial effects upon being triggered by broad-spectrum light. These nanomaterials have also exhibited satisfactory energy band gaps and electronic density distribution with improved photonic properties for extensive and comprehensive applications after being modified through various engineering methods. This review summarizes the latest research progress made on bismuth-based nanomaterials with different morphologies, structures and compositions as well as the different methods used for their synthesis to meet their rapidly increasing demand, especially for antibacterial applications. Moreover, the future prospects and challenges regarding the application of these nanomaterials are discussed. The aim of this review is to stimulate interest in the development and experimental transformation of novel bismuth-based nanomaterials to expand the arsenal of effective antimicrobials.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Construction of Bi/BiOI/BiOCl Z-scheme photocatalyst with enhanced tetracycline removal under visible light

Bi/BiOI/BiOCl composite photocatalyst was constructed by one-step stirring approach at ambient environment to remove of tetracycline (TC) antibiotics via photodegradation in aqueous medium. A systematic discussion of the architecture, composition, formation, photochemical performance and photocatalytic activity of Bi/BiOI/BiOCl was carried out. By adjusting the experimental conditions, it was found that the Bi/BiOI/BiOCl photocatalyst obtained by using 0.7 mmol NaBH4, I/Cl = 5% and reacting for 6 h had the greatest removal performance. Under visible light irradiation, the photocatalytic degradation efficiency of TC reached 90.3% within 60 min, surpassing that of single BiOCl and BiOI. Through the active species removal experiment, it was determined that •O2- made a primary contribution to the photocatalytic degradation process. Moreover, the formation of Z-scheme heterojunction in Bi/BiOI/BiOCl was discussed, analyzing the photocatalytic mechanism and TC degradation pathway. The ecological toxicity of TC solution before and after degradation to rice seedlings was preliminarily tested. This study provides an idea for one-step synthesis of bismuth-based composite photocatalysts, with potential applications in the photocatalytic degradation of antibiotics.

One-pot solvothermal synthesis of Bi/Bi2S3/Bi2WO6 S-scheme heterojunction with enhanced photoactivity towards antibiotic oxytetracycline degradation under visible light

A novel noble-metal-free ternary Bi/Bi₂S₃/Bi₂WO₆ S-scheme heterojunction and Schottky junction was successfully synthesized by one-pot solvothermal method. UV-Vis spectroscopy showed improved light absorption in the ternary composite structure. Electrochemical impedance spectroscopy and photoluminescence spectroscopy confirmed the reduced interfacial resistivity and photogenerated charge recombination rate of the composites. Using oxytetracycline (OTC) as model pollutant, Bi/Bi₂S₃/Bi₂WO₆ presented high photocatalytic activity towards OTC degradation, where the removal rate of Bi/Bi₂S₃/Bi₂WO₆ was 1.3 and 4.1 times higher than that of Bi₂WO₆ and Bi₂S₃ under visible light irradiation in 15 min, respectively. The excellent visible photocatalysis activity was attributed to the SPR effect of metal Bi and the direct S-scheme heterojunction of Bi₂S₃ and Bi₂WO₆ with the matched energy band structure, which led to the increased electron transfer rate and high separation efficiency of the photogenerated election-hole pairs. After seven cycles, the degradation efficiency for 30 ppm OTC with Bi/Bi₂S₃/Bi₂WO₆ only decreased 20.4%. In the degradation solution, the composite photocatalyst leached only 16 ng/L Bi and 26 ng/L W of metal with high photocatalytic stability. Moreover, free radical quenching experiment and electron spin-resonance spectroscopy experiment revealed that ·O₂^-, ¹O₂, h⁺ and ·OH played crucial roles in the photocatalytic degradation of OTC. Based on the analysis of high performance liquid chromatography-mass spectrometry for the intermediates in the degradation process, the degradation pathway was provided. Finally, combined with ecotoxicological effect analysis, the decreased toxicity of OTC after degradation towards rice seedlings was confirmed.

Preparation and application of Ag plasmon Bi3O4Cl photocatalyst for removal of emerging contaminants under visible light

Photocatalytic degradation has been extensively investigated toward the removal emerging contaminants (ECs) from water. In this study, a series of Ag-Bi₃O₄Cl plasmon photocatalysts were synthesized through the photo-deposition of metallic Ag on the Bi₃O₄Cl surface. The effects of plasmon modification on the catalytic performance of bismuth oxychlorides were analyzed. Ag addition did not alter the morphology of Bi₃O₄Cl. With the increasing Ag content, the number of oxygen defects on the catalyst surface first increased and then decreased. Moreover, the surface plasmon resonance effect of Ag suppressed the recombination of electron-hole pairs, promoting the migration and separation of photocarriers and improving the light absorption efficiency. However, the addition of excessive Ag reduced the number of active sites on the Bi₃O₄Cl surface, hindering the catalytic degradation of pollutants. The optimal Ag-Bi₃O₄Cl photocatalyst (Ag ratio: 0.025; solution pH: 9; dosage: 0.8 g/L) achieved 93.8 and 94.9% removal of ciprofloxacin and tetrabromobisphenol A, respectively. The physicochemical and photoelectric properties of Ag-Bi₃O₄Cl were determined through various characterization techniques. This study demonstrates that introducing metallic Ag alters the electron transfer path of the catalyst, reduces the recombination rate of electron-hole pairs, and effectively improves the catalytic efficiency of Bi₃O₄Cl. Furthermore, the pathways of ciprofloxacin degradation products and their biotoxicity were revealed.

Interspersed Bi Promoting Hot Electron Transfer of Covalent Organic Frameworks Boosts Nitrogen Reduction to ammonia

Seeking highly-efficient, non-pollutant, and chemically robust photocatalysts for visible-light-driven ammonia production still remained challenging, especially in pure water. The key bottle-necks closely correlate to the nitrogen activation, water oxidization, and hydrogen evolution reaction (HER) processes. In this study, a novel Bi decorated imine-linked COF-TaTp (Bi/COF-TaTp) through N-Bi-O coordination is reasonably designed to achieve a boosting solar-to-ammonia conversion of 61 µmol^-1  g^-1  h^-1 in the sacrificial-free system. On basis of serial characterizations and DFT calculations, the incorporated Bi is conducive to the acceleration of charge carriers transfer and N₂ activation through the donation and back-donation mode. The N₂ adsorption energy of 5% Bi/COF-TaTp is calculated to be -0.19 eV in comparison with -0.09 eV of the pure COF-TaTp and the electron exchange between N₂ and the modified catalyst is much more intensive. Moreover, the accompanied hydrogen production process is effectively inhibited by Bi modification, demonstrated by the higher energy barrier for HER over Bi/COF-TaTp (2.62 eV) than the pure COF-TaTp (2.31 eV) when using H binding free energy (ΔG_H* ) as a descriptor. This work supplies novel insights for the design of photocatalysts for N₂ reduction and intensifies the understanding of N₂ adsorption and activation over covalent organic frameworks-based materials.

Construction of Bi2WO6 with double active sites of tunable metallic Bi and oxygen vacancies for photocatalytic oxidation of cyclohexane to cyclohexanone

Oxygen-containing organics, which are generated from the selective oxidation of their corresponding hydrocarbons, have high value in the chemical and pharmaceutical industries. However, their oxidation reactions are very challenging as the products are more active than the substrates, especially for the oxidation of cyclohexane (CHA). Herein, we focused on the one-step preparation of Bi₂WO₆ with double active sites of tunable metallic Bi and oxygen vacancies (OV-Bi/Bi₂WO₆) by a facile solvothermal treatment. Then, OV-Bi/Bi₂WO₆ was used as an efficient photocatalyst for the partial oxidation of CHA to cyclohexanone (CHA-one) for the first time in air as an oxidant under solvent-free and room temperature conditions. The Bi : Bi₂WO₆ ratio in the as-prepared OV-Bi/Bi₂WO₆ heterojunction could be tailored from 0.08 to 8.43 by controlling the solvothermal temperature, and the synergistic effect between DMF and EG could increase the reduction of MDF/EG and promote the production of Bi. Moreover, OV-Bi/Bi₂WO₆-160 yielded 4.4 and 8.8 times more CHA-one (128.8 μmol) than pure Bi₂WO₆ and metallic Bi, respectively, and achieved 93.6% selectivity to CHA-one in air as an oxidant under solvent-free conditions. The results revealed that the highly enhanced photocatalytic activity was mainly attributed to the superior specific surface area, outstanding photo-absorption, abundant oxygen vacancies, and efficient electron-hole separation. Moreover, for the unique double active sites in OV-Bi/Bi₂WO₆, oxygen vacancies can enhance the adsorption and activation capacity of Bi₂WO₆ for O₂, while metallic Bi can improve the adsorption and activation capacity of Bi₂WO₆ for CHA. Meanwhile, OV-Bi/Bi₂WO₆ also exhibited excellent durability due to the strong interaction between metallic Bi and Bi₂WO₆. The present work provides a flexible approach for tailoring the Bi : Bi₂WO₆ ratio and outlines an effective method for producing CHA-one from CHA under mild conditions.

Insight into the mechanism of deep NO photo-oxidation by bismuth tantalate with oxygen vacancies

Deeply photocatalytic oxidation of nitrogen oxides is still difficult to achieve, mainly limited by few intrinsic active sites and inefficient carrier separation of photocatalysts. Accordingly, we develop a simple room temperature tactic to introduce oxygen vacancies (OVs) into Bi₃TaO₇ (BTO). Based on solid experimental and DFT theoretical supports, we explore the mechanism of NO removal over OVs decorated BTO (OVs-BTO). OVs can not only alter the distribution of local electrons to result in the formation of a fast charge transfer channel between OVs and the adjacent Ta atoms, which improves the transport rate of photogenerated carriers; but also function as active sites to adsorb small molecules (NO, O₂ and H₂O), which being activated and positively drive the NO oxidation reaction. In order to investigate a possible reaction path, a combination of in-situ DRIFTS and simulated Gibbs free energy reveals that the intermediate products of OVs-BTO are helpful to promote the deep oxidation of NO to NO₃^-, while pristine BTO is more likely to produce NO₂ intermediate toxic by-products, which greatly hinders the deep photocatalytic oxidation of NO. This work provides insights into the role of OVs in photocatalysts, and also points out a guideline for the mechanism of semiconductor photocatalysts in eliminating gaseous pollutants.

Surface, Interface and Structure Optimization of Metal-Organic Frameworks: Towards Efficient Resourceful Conversion of Industrial Waste Gases

Industrial waste gas emissions from fossil fuel over-exploitation have aroused great attention in modern society. Recently, metal-organic frameworks (MOFs) have been developed in the capture and catalytic conversion of industrial exhaust gases such as SO₂ , H₂ S, NO_x , CO₂ , CO, etc. Based on these resourceful conversion applications, in this review, we summarize the crucial role of the surface, interface, and structure optimization of MOFs for performance enhancement. The main points include (1) adsorption enhancement of target molecules by surface functional modification, (2) promotion of catalytic reaction kinetics through enhanced coupling in interfaces, and (3) adaptive matching of guest molecules by structural and pore size modulation. We expect that this review will provide valuable references and illumination for the design and development of MOF and related materials with excellent exhaust gas treatment performance.

Bismuth quantum dots anchored one-dimensional CdS as plasmonic photocatalyst for pharmaceutical tetracycline hydrochloride pollutant degradation

Earth abundant metal based plasmonic photocatalysis is one of the most proficient approaches to degrade the emergent organic pollutants in contaminated water. Here, we report that using one-dimensional CdS/zero-dimensional Bi quantum dot (QD) heterostructures (1D/0D CdS/Bi HSs) were obtained via a simple solvothermal reaction. The results specified that the Bi QDs were grown onto CdS NRs through the reduction of Bi³⁺ ions. The Bi modified CdS HSs were employed as a photocatalyst for pharmaceutical pollutant tetracycline degradation and the optimized sample showed the maximum photocatalytic degradation activity of 90% under visible light radiation within 60 min, which is greater than the pure CdS (52%) under identical conditions. Based on the structural characterizations and degradation efficiency, the obtained CdS/Bi is a promising photocatalyst for the treatment of wastewater which contains emerging pollutants such as organic dyes and pharmaceutical antibiotics during the industrial processes. The boosted photocatalytic degradation efficiency is credited to the doped Bi³⁺ species; surface plasmon resonance effect that raised from metallic Bi QDs and proficient photoinduced charge carriers separation.

Fabrication of Bi-Bi3O4Cl plasmon photocatalysts for removal of aqueous emerging contaminants under visible light

Photocatalytic oxidation of emerging contaminants (ECs) in water has recently gained extensive attentions. In this study, bismuth oxychloride-based plasmon photocatalysts (Bi-Bi₃O₄Cl) exhibiting high performance were successfully developed by reducing Bi³⁺ on the surface of Bi₃O₄Cl. Consequently, the photocatalysts were used to remove ECs from water. The effects of developmental process and Bi metal plasmon resonance on the photoelectric performances of Bi-Bi₃O₄Cl were investigated through a series of characterizations. The UV-vis diffuse reflection and photoluminescence spectra revealed that the light absorption range of the photocatalyst gradually increased and the electron recombination rate gradually decreased with the introduction of Bi metals. The optimal removal rates of ciprofloxacin and tetrabromobisphenol A by Bi-Bi₃O₄Cl were 93.8% and 96.4%; the respective reaction rate constants were 5.48 and 4.93 times higher than that of Bi₃O₄Cl. The mechanism study indicated that main reactants in the photocatalytic system were •O₂^- radicals and photogenerated holes, and the existence of oxygen vacancies and Bi metals promoted electron transfer in photocatalyst. In conclusion, this research produces a novel, green, highly efficient, and stable visible light photocatalyst for the removal of ECs from water.

Smart Solar-Metal-Air Batteries Based on BiOCl Photocorrosion for Monolithic Solar Energy Conversion and Storage

Herein, a BiOCl hydrogel film electrode featuring excellent photocorrosion and regeneration properties acts as the anode to construct a novel type of smart solar-metal-air batteries (SMABs), which combines the characteristics of solar cells (direct photovoltaic conversion) and metal-air batteries (electric energy storage and release interacting with atmosphere). The cyclic photocorrosion processes between BiOCl (Bi³⁺ ) and Bi can simply be achieved by solar light illumination and standing in the dark. Upon illumination, the device takes open-circuit configuration to charge itself from the sunlight. Notably, in this system, the converted solar energy can be stored in the SMABs without the need of external assistance. In the discharging process in the dark, Bi⁰ spontaneously turns back to Bi³⁺ producing electrons to induce the oxygen reduction reaction. With an illumination of 15 min, the battery with an electrode area of 1 cm² can be continuously discharged for ≈3000 s. Taking elemental Bi as the calculation object, the theoretical capacity of the SMABs is 384.75 mAh g^-1 , showing its potential application in energy storage. This novel type of SMABs is developed based on the unique photocorrosive and self-oxidation reaction of BiOCl to achieve photochemical energy generation and storage.

Promotion mechanism of -OH group intercalation for NOx purification on BiOI photocatalyst

Bismuth oxyiodide (BiOI) is a traditional layered oxide photocatalyst that performs in a wide visible-light absorption band, owing to its appropriate band structure. Nevertheless, its photocatalytic efficiency is immensely inhibited due to the serious recombination of photogenerated charge carriers. Herein, this great challenge is addressed via a new strategy of intralayer modification by -OH groups in BiOI, which leads to enhancement of the reactants' activation capacity to promote photocatalytic activity and generate more active species. Furthermore, analysis via a combination of experimental and theoretical methods revealed that the -OH group-functionalized samples reduce the energy barriers for conversion of the main intermediate (NO₂), which is easily transformed to NO₂^-, thus accelerating the oxidation of NO to the final product (NO₃^-). This study gives insight into NO oxidation, improving the photocatalytic efficiency, and mastering the photocatalysis reaction mechanism to curb air pollution.

Phase transformation and heterojunction construction of bismuth oxyiodides by grinding-assisted calcination in the presence of thiourea and their photoactivity

Bismuth-rich oxyhalides are promising photocatalysts due to their special layered structure and adjustable band gap energy. In this work, a series of bismuth oxyiodides were fabricated by grinding-assisted calcination in the presence of thiourea, where grinding-induced mechanical force could accelerate the decomposition reaction and thiourea could prohibit the crystal particles from growing due to coordination action. The combined effect of grinding and thiourea could decrease the temperature of phase transformation of bismuth oxyiodides. Among these, heterojunction Bi4O5I2/Bi5O7I containing uniform flower-like microspheres assembled by ultra-thin nanosheets exhibited the highest photocatalytic activity and favorable stability for the degradation of the antibiotic tetracycline under visible light irradiation. This work could provide a good reference for the design of bismuth-rich oxyhalide heterojunction for photocatalytic applications.

Bi metal/oxygen-deficient BiO2-x with tetrahedral morphology and high photocatalytic activity

Vacancy-rich materials with high photocatalytic activity are of great interest for pollutants removal and play a significant role in green chemistry. Herein, we successfully synthesized Bi/BiO_2-x composite through hydrothermal route. In this case, the surface plasmon resonance effect of Bi and oxygen vacancies of BiO_2-x collectively increase the removal rate of pollutants. More importantly, the Bi/BiO_2-x composites have enhanced activity in the degradation of RhB, MO, BPA and CIP, and the reduction of Cr(VI) and PNA. Besides, an enhanced photocatalytic activity is due to the main reactive species of ·[Formula: see text] and h⁺ that is confirmed by trapping experiments and ESR analyses. The electronic structure and visible light harvesting of photocatalysts were measured and also theoretically calculated by using density functional theory and finite difference time domain calculations, DRS, VB x-ray photoelectron spectroscopy and Mott-Schottky plots, which allowed to propose a possible photocatalytic mechanism for the degradation process.

A novel Z-scheme porous g-C3N4 nanosheet/Ag3PO4 photocatalyst decorated with N-doped CDs for high efficiency removal of antibiotics

A number of porous g-C3N4 nanosheet/Ag3PO4/NCDs (PCNNS/AP/NCDs) with little amounts of Ag3PO4 were synthesized via an in situ sedimentation-calcination method. The PCNNS/AP/NCDs photocatalyst exhibited excellent photocatalytic performance for the photocatalytic degradation of tetracycline (TC) under visible light irradiation at a removal rate of 90.5% in 40 min. The study of the reaction kinetics of the as-prepared samples was in accordance with the pseudo-second-order kinetics, with the correlation coefficient (R2) being greater than 0.9776. Meanwhile, the photocatalyst was capable of degrading ciprofloxacin (CIP), and showed good performance even under actual water conditions with natural sunlight irradiation, indicating that the photocatalyst has wide practical applications. In addition, the photocatalytic performance and the XRD and FTIR spectra showed no obvious changes even after four photocatalytic degradation cycles, which revealed the high stability of the PCNNS/AP/NCDs photocatalyst. Furthermore, the possible degradation pathways of TC and the possible Z-scheme mechanism were proposed with ˙O2- and h+ as the main active species contributing to photocatalytic degradation. The results provide a novel insight into the fabrication of Z-scheme PCNNS/AP/NCDs and introduce them as an efficient visible-light-responsive photocatalyst for use in practical applications.

New insight into reactive oxidation species (ROS) for bismuth-based photocatalysis in phenol removal

Bismuth-based semiconductors (BBS) are a group of promising candidates applied to visible light-induced photocatalysis. With deep positions of valence bands (2.34-4.04 eV), BBS exhibited excellent activity in oxidation processes. Fundamental studies on the reactive oxidation species primarily focused on TiO₂ under ultraviolet, and it was recognized that OH radicals were effective reactive oxidative species in photocatalytic oxidation processes. This verdict may not be applicable for all other photocatalytic systems. In this study, the reactive oxidation species for BBS in the photocatalytic decomposition of phenol were explored. BBS were prepared with Hierarchical structures and high crystallinity. It was found that OH radicals and superoxide radicals were negligibly produced in most BBS photocatalytic systems. Instead, separated holes on the valence band may directly react with adsorbed species including organics, and acted as the primary ROS. One of the possible explanations of this phenomenon may be due to the shorter lifetime of photogenerated charge carriers on most BBS (212.3-415.7 ms) compared to that of TiO₂ (1193.8 ms). Photocatalytic reaction pathways of degradation of phenol were also different between BBS and TiO₂, which were proposed. This work shed light on the significance of addressing and clarifying the reactive oxidation species in BBS photocatalysis.