One-pot synthesis of peony-like Bi2S3/BiVO4(040) with high photocatalytic activity for glyphosate degradation under visible light irradiation

Fluorine-doped BiVO4 photocatalyst: Preferential cleavage of C-N bond for green degradation of glyphosate

With increasing concerns on the environment and human health, the degradation of glyphosate through the formation of less toxic intermediates is of great importance. Among the developed methods for the degradation of glyphosate, photodegradation is a clean and efficient strategy. In this work, we report a new photocatalyst by doping F ion on BiVO₄ that can efficiently degrade glyphosate and reduce the toxic emissions of aminomethylphosphonic acid (AMPA) through the selective (P)-C-N cleavage in comparison of BiVO₄ catalyst. The results demonstrate that the best suppression of AMPA formation was achieved by the catalyst of 0.3F@BiVO₄ at pH = 9 (AMPA formation below 10%). In situ attenuated total reflectance Fourier transforms infrared (ATR-FTIR) spectroscopy indicates that the adsorption sites of glyphosate on BiVO₄ and 0.3F@BiVO₄ are altered due to the difference in electrostatic interactions. Such an absorption alteration leads to the preferential cleavage of the C-N bond on the N-C-P skeleton, thereby inhibiting the formation of toxic AMPA. These results improve our understanding of the photodegradation process of glyphosate catalyzed by BiVO₄-based catalysts and pave a safe way for abiotic degradation of glyphosate.

Heterogeneous photocatalytic oxidation for the removal of organophosphorus pollutants from aqueous solutions: A review

Organophosphorus pollutants (OPs), which are compounds containing carbon‑phosphorus bonds or phosphate derivatives containing organic groups, have received much attention from researchers because of their persistence in the aqueous environment for long periods of time and the threat they pose to human health. Heterogeneous photocatalysis has been widely applied to the removal of OPs from aqueous solutions due to its better removal effect and environmental friendliness. In this review, the removal of OPs from aqueous matrices by heterogeneous photocatalysis was presented. Herein, the application and the heterogeneous photocatalysis mechanism of OPs were described in detail, and the effects of catalyst types on degradation effect are discussed categorically. In particular, the heterojunction type photocatalyst has the most excellent effect. After that, the photocatalytic degradation pathways of several OPs were summarized, focusing on the organophosphorus pesticides and organophosphorus flame retardants, such as methyl parathion, dichlorvos, dimethoate and chlorpyrifos. The toxicity changes during degradation were evaluated, indicating that the photocatalytic process could effectively reduce the toxicity of OPs. Additionally, the effects of common water matrices on heterogeneous photocatalytic degradation of OPs were also presented. Finally, the challenges and perspectives of heterogeneous photocatalysis removal of OPs are summarized and presented.

A Brief Review of Photocatalytic Reactors Used for Persistent Pesticides Degradation

Pesticide pollution is a major issue, given their intensive use in the 20th century, which led to their accumulation in the environment. At the international level, strict regulations are imposed on the use of pesticides, simultaneously with the increasing interest of researchers from all over the world to find methods of neutralizing them. Photocatalytic degradation is an intensively studied method to be applied for the degradation of pesticides, especially through the use of solar energy. The mechanisms of photocatalysis are studied and implemented in pilot and semi-pilot installations on experimental platforms, in order to be able to make this method more efficient and to identify the equipment that can achieve the photodegradation of pesticides with the highest possible yields. This paper proposes a brief review of the impact of pesticides on the environment and some techniques for their degradation, with the main emphasis on different photoreactor configurations, using slurry or immobilized photocatalysts. This review highlights the efforts of researchers to harmonize the main elements of photocatalysis: choice of the photocatalyst, and the way of photocatalyst integration within photoreaction configuration, in order to make the transfer of momentum, mass, and energy as efficient as possible for optimal excitation of the photocatalyst.

Bi2 S3 -In2 S3 Heterostructures for Efficient Photoreduction of Highly Toxic Cr6+ Enabled by Facet-Coupling and Z-Scheme Structure

The construction of Z-scheme photocatalyst materials mimicking the natural photosynthesis system provides many advantages, including increased light harvesting, spatially separated reductive and oxidative active sites and strong redox ability. Here, a novel Bi₂ S₃ nanorod@In₂ S₃ nanoparticle heterojunction photocatalyst synthesized through one-pot hydrothermal method for Cr⁶⁺ reduction is reported. A systematic investigation of the microstructural and compositional characteristics of the heterojunction catalyst confirms an intimate facet coupling between (440) crystal facet of In₂ S₃ and (060) crystal facet of Bi₂ S₃ , which provides a robust heterojunction interface for charge transfer. When tested under visible-light irradiation, the Bi₂ S₃ -In₂ S₃ heterojunction photocatalyst with 15% Bi₂ S₃ loading content achieves the highest Cr⁶⁺ photoreduction efficiency of nearly 100% with excellent stability, which is among the best-reported performances for Cr⁶⁺ removal. Further examination using optical, photoelectrochemical, impedance spectroscopy, and electron spin resonance spectroscopy characterizations reveal greatly improved photogenerated charge separation and transfer efficiency, and confirm Z-scheme electronic structure of the photocatalyst. The Z-scheme Bi₂ S₃ -In₂ S₃ photocatalyst demonstrated here presents promise for the removal of highly toxic Cr⁶⁺ , and could also be of interest in photocatalytic energy conversion.

Flower-like Bi2S3-In2S3 heterojunction for efficient solar light induced photoreduction of Cr(VI)

To develop Bi₂S₃-based heterojunction for efficient solar light induced photoreduction of Cr(VI), flower-like Bi₂S₃-In₂S₃ composites consisted of nanorods were prepared via a microwave-assisted hydrothermal route. In contrast with pure Bi₂S₃, Bi₂S₃-In₂S₃ composites exhibited the enhanced photoreduction activity while the decreased adsorption capacity for Cr(VI) removal. The best removal efficiency of 70 mg L^-1 Cr(VI) solution (99.86%) was achieved by the optimal 3-Bi₂S₃-In₂S₃ with a Bi/In molar ratio of 4:1 within 140 min. It's ascribed to the narrow band gap for strengthened visible-light response, the tight interface between Bi₂S₃ and In₂S₃ for rapid transfer and separation of charge carriers, and the enough S vacancies for highly-efficient active sites of adsorption-photoreduction. However, the long-term photo-corrosion resulted in the slightly inferior reusability of 3-Bi₂S₃-In₂S₃ under solar light irradiation after five cycles.

Photocatalytic degradation of ibuprofen using titanium oxide: insights into the mechanism and preferential attack of radicals

The present work studied ibuprofen degradation using titanium dioxide as a photocatalyst. Mechanistic aspects were presented and the preferred attack sites by the OH˙ radical on the ibuprofen molecule were detailed, based on experimental and simple theoretical-computational results. Although some previous studies show mechanistic proposals, some aspects still need to be investigated, such as the participation of 4-isobutylacetophenone in the ibuprofen degradation and the preferred regions of attack by OH˙ radicals. The photodegradation was satisfactory using 0.03 g of TiO₂ and pH = 5.0, reaching 100% decontamination in 5 min. The zeta potential curve showed the regions of attraction and repulsion between TiO₂ and ibuprofen, depending on the pH range and charge of the species, influencing the amount of by-products formed. Different by-products have been identified by GC-MS, such as 4-isobutylacetophenone. Ibuprofen conversion to 4-isobutylacetophenone takes place through decarboxylation reaction followed by oxidation. The proposed mechanism indicates that the degradation of ibuprofen undergoes a series of elementary reactions in solution and on the surface. Three different radicals (OH˙, O₂⁻˙ and OOH˙) are produced in the reaction sequence and contribute strongly to the oxidation and mineralization of ibuprofen and by-products, but the hydroxyl radical has a greater oxidation capacity. The simple study using the DFT approach demonstrated that the OH˙ radical attacks preferentially in the region of the ibuprofen molecule with high electronic density, which is located close to the aromatic ring (C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C bond). The presence of the OH˙ radical was confirmed through a model reaction using salicylic acid as a probe molecule.

The degradation of ibuprofen undergoes a series of elementary reactions, generating different radicals which attack preferentially in the region of the ibuprofen with high electron density.

An activated carbon fiber supported Fe2O3@bismuth carbonate heterojunction for enhanced visible light degradation of emerging pharmaceutical pollutants

The developed Fe2O3@BC heterojunction photocatalyst supported over activated carbon fiber exhibited efficient photocatalytic activity for degradation of antipyrine under visible light irradiation.