Selective oxidation of glycerol in a base-free aqueous solution: A short review

Bandgap engineering control bifunctional MnxCd1-xS photocatalysts selectively reforming xylose to C3 organic acids and efficient hydrogen production

The simultaneous reforming of biomass into high value-added chemicals and H2 production by water splitting in a green and environmentally clean way is a very challenging task. Herein, we demonstrate the design of bifunctional MnxCd1-xS photocatalyst with a controllable band gap by bandgap engineering. Bandgap engineering effectively regulates the oxidation and reduction capacity of materials. The design of photocatalysts with suitable conduction bands and valence bands makes the targeted conversion of xylose possible. Innovative conversion of xylose to glyceric acid, lactic acid, and propanoic acid. The optimized Mn0.7Cd0.3S catalyst showed excellent performance in the production of H2 (14.06 mmol·gcat-1·h-1, 29.9 times more than CdS and 351.5 times more than MnS), xylose conversion (90%), and C3 organic acid yield (59.2%) without cocatalyst and any scavengers under visible light irradiation. This work shows that a rational photocatalyst design can achieve efficient simultaneous production of high value-added chemicals and clean energy.

Metal-organic frameworks-derived oxalate ligand modified NiCo hydroxides for enhanced electrochemical glycerol oxidation reaction

Glycerol oxidation reaction can be substituted for oxygen evolution reaction for more efficient hydrogen production due to its lower thermodynamic potential. Herein, a series of NiCo hydroxide nanosheets containing abundant Ni3+ species and surface ligands were synthesized by in-situ structural transformation of bimetallic organic frameworks in alkaline media for efficient glycerol oxidation reaction. It is found that the incorporation of Co ions increases the content of the Ni3+ species, and that the Ni/Co ratio of 1.0 lead to the optimal catalytic performance. The oxalate-modified nickel-cobalt hydroxide with the optimized Ni/Co ratio can deliver a current density of 10 mA cm-2 at 1.26 V vs. RHE (reversible hydrogen electrode), and reaches its maximum selectivity and Faradaic efficiency at 1.30 V vs. RHE. A high selectivity of 82.9% and a Faradaic efficiency of 91.0% are achieved. The high catalytic activity can be mainly attributed to the abundant Ni3+ species and surface carboxyl groups.

Heterogeneous catalytic oxidation of glycerol over a UiO-66-derived ZrO2@C supported Au catalyst at room temperature

The catalytic conversion of biomass-derived glycerol into high-value-added products, such as glyceric acid (GLYA), using catalyst-supported Au nanoparticles (Au NPs) at room temperature presents a significant challenge. In this study, we constructed a series of supported Au catalysts, including Au/ZrO2@C, Au/C, Au/ZrO2, and Au/ZrO2-C, and investigated their effectiveness in selectively catalytic oxidizing glycerol to GLYA at room temperature. Among these catalysts, the Au/ZrO2@C catalyst exhibited the best catalytic performance, achieving a glycerol conversion rate of 73% and a GLYA selectivity of 79% under the optimized reaction conditions (reaction conditions: 30 mL 0.1 M glycerol, glycerol/Au = 750 mol mol-1, T = 25 °C, p(O2) = 10 bar, stirring speed = 600 rpm, time = 6 h). Physical adsorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and other characterization methods were employed to analyze the texture properties of the catalyst. The findings indicated that the support structure, the strong metal-support interactions between Au NPs and the support, and the presence of small metallic Au NPs were the primary factors contributing to the catalyst's high activity and selectivity. Moreover, the reusability of the Au/ZrO2@C catalyst was investigated, and a probable reaction mechanism for the oxidation of glycerol was proposed.

Photoelectrochemical Selective Oxidation of Glycerol to Glyceraldehyde with Bi-Based Metal-Organic-Framework-Decorated WO3 Photoanode

The conversion of glycerol to high-value-added products via photoelectrochemical (PEC) oxidation has emerged as a promising approach for utilizing a sustainable and clean energy source with environmental and economic benefits. Moreover, the energy requirement for glycerol to produce hydrogen is lower than that for pure water splitting. In this study, we propose the use of WO₃ nanostructures decorated with Bi-based metal-organic frameworks (Bi-MOFs) as the photoanode for glycerol oxidation with simultaneous hydrogen production. The WO₃-based electrodes selectively converted glycerol to glyceraldehyde, a high-value-added product, with remarkable selectivity. The Bi-MOF-decorated WO₃ nanorods enhanced the surface charge transfer and adsorption properties, thereby improving the photocurrent density and production rate (1.53 mA/cm² and 257 mmol/m²·h at 0.8 V_RHE). The photocurrent was maintained for 10 h, ensuring stable glycerol conversion. Furthermore, at 1.2 V_RHE, the average production rate of glyceraldehyde reached 420 mmol/m²·h, with a selectivity of 93.6% between beneficial oxidized products over the photoelectrode. This study provides a practical approach for the conversion of glycerol to glyceraldehyde via the selective oxidation of WO₃ nanostructures and demonstrates the potential of Bi-MOFs as a promising cocatalyst for PEC biomass valorization.

Stable and Active Au Catalyst Supported on CeMnO3 Perovskite for Selective Oxidation of Glycerol

The selective oxidation of glycerol holds promise to transform glycerol into value-added chemicals. However, it remains a big challenge to achieve satisfactory selectivity toward the specific product at high conversion due to the multiple reaction pathways. Here, we prepare a hybrid catalyst via supporting Au nanoparticles on CeMnO₃ perovskite with a modest surface area, achieving promoted conversion of glycerol (90.1%) and selectivity of glyceric acid (78.5%), which are much higher than those of CeMnO_x solid-solution-supported Au catalysts with larger surface area and other Ce-based or Mn-based Au catalysts. The strong interaction between Au and CeMnO₃ perovskite facilitates the electron transfer from the B-site metal (Mn) in the CeMnO₃ perovskite to Au and stabilizes Au nanoparticles, which results in the enhanced catalytic activity and stability for glycerol oxidation. Valence band photoemission spectral analysis reveals that the uplifted d-band center of Au/CeMnO₃ promotes the adsorption of the glyceraldehyde intermediate on the catalyst surface, which benefits further oxidation of glyceraldehyde into glyceric acid. The flexibility of the perovskite support provides a promising strategy for the rational design of high-performance glycerol oxidation catalysts.

Dihydroxyacetone: A User Guide for a Challenging Bio-Based Synthon

1,3-dihydroxyacetone (DHA) is an underrated bio-based synthon, with a broad range of reactivities. It is produced for the revalorization of glycerol, a major side-product of the growing biodiesel industry. The overwhelming majority of DHA produced worldwide is intended for application as a self-tanning agent in cosmetic formulations. This review provides an overview of the discovery, physical and chemical properties of DHA, and of its industrial production routes from glycerol. Microbial fermentation is the only industrial-scaled route but advances in electrooxidation and aerobic oxidation are also reported. This review focuses on the plurality of reactivities of DHA to help chemists interested in bio-based building blocks see the potential of DHA for this application. The handling of DHA is delicate as it can undergo dimerization as well as isomerization reactions in aqueous solutions at room temperature. DHA can also be involved in further side-reactions, yielding original side-products, as well as compounds of interest. If this peculiar reactivity was harnessed, DHA could help address current sustainability challenges encountered in the synthesis of speciality polymers, ranging from biocompatible polymers to innovative polymers with cutting-edge properties and improved biodegradability.

Gd3+-substituted BiFeO3 perovskite nanoparticles: facile synthesis, characterization, and applications in heterogeneous catalysis

We present the combustion-based synthesis of BiFeO₃ (BFO) and Gd:BiFeO₃ perovskite nanoparticles. XRD analysis demonstrates that the undoped BFO (x = 0) perovskite sample shows a single perovskite phase with a rhombohedral structure. However, increase in the Gd³⁺ content from x = 0.05 and 0.15 to 0.25 led to the occurrence of a structural phase transformation from rhombohedral (BiFeO₃) to orthorhombic (Bi₂Fe₄O₉). With an increase in the Gd-dopant the average crystallite size of rhombohedral structures increased from 16 to 23 nm. The perovskite samples were examined using XPS, which confirmed the presence of Bi³⁺, Gd³⁺, Fe²⁺, and O²⁺ ions. FT-IR spectroscopy indicated the existence of elemental functional groups in the synthesized perovskite nanoparticles. Furthermore, the direct band gap measured by DRS reduced from 2.16 to 2.0 eV as the Gd concentration increased. The nanoparticles of the BFO perovskite had an uneven shape, a tendency to agglomerate, and fused grains with defined grain boundaries. At ambient temperature, both the undoped and Gd:BFO perovskite nanoparticles exhibit a ferromagnetic characteristic. It was found that the BET surface area of the undoped and Gd-doped BFO perovskite nanoparticles varied progressively from 4.38 to 33.52 m² g^-1. The catalytic oxidation studies conducted in a batch reactor under air conditions revealed that the synthesized catalysts, in particular, Gd:BFO (x = 0.25), exhibited higher conversion and selectivity efficiencies for glycerol (con. 100% and sel. 99.5%, respectively).

Pt1 enhanced C-H activation synergistic with Ptn catalysis for glycerol cascade oxidation to glyceric acid

The selective oxidation of glycerol to glyceric acid, an important value-added reaction from polyols, is a typical cascade catalytic process. It is still of great challenge to simultaneously achieve high glycerol activity and glyceric acid selectivity, suffering from either deep oxidation and C-C cleavage or poor oxidation efficiency from glyceraldehyde to glyceric acid. Herein, this work, inspired by nature, proposes a cascade synergistic catalysis strategy by atomic and low-coordinated cluster Pt on well-defined Cu-CuZrO_x, which involves enhanced C-H activation on atomic Pt₁ and O-H activation on cluster Pt_n in the oxidation of glycerol to glyceraldehyde, and cluster Pt_n for C=O activation followed by O-H insertion and atomic Pt₁ for C-H activation in the tandem oxidation of glyceraldehyde to glyceric acid. The enhanced C-H activation in the cascade process by atomic Pt₁ is revealed to be essential for the high glycerol activity (90.0±0.1%) and the glyceric acid selectivity (80.2±0.2%).

The selective oxidation of glycerol to glyceric acid is an important value-added cascade catalytic process. Here the authors report a cascade synergistic catalysis strategy by atomic and low-coordinated cluster Pt on well-defined Cu-CuZrOx to simultaneously achieve high activity and selectivity.

Photo-Oxidation of Glycerol Catalyzed by Cu/TiO2

In the present study, glycerol was oxidized by photocatalysis to glyceraldehyde, formaldehyde, and formic acid. Copper-doped TiO2 was synthesized by the evaporation-induced self-assembly approach and it was used as catalyst during the glycerol photo-oxidation reactions. The prepared mesoporous material exhibited high specific surface area (242 m2/g) and band gap energy reduction of 2.55 eV compared to pure titania (3.2 eV) by the synthesis method due to the presence of copper cations (Cu2+ identified by XPS). The catalyst showed only anatase crystalline phase with nanocrystals around 8 nm and irregular agglomerates below 100 μm. The selectivity and formation rate of the products were favored towards formaldehyde and glyceraldehyde. The variables studied were catalyst amount, reaction temperature, and initial glycerol concentration. The response surface analysis was used to evaluate the effect of the variables on the product’s concentration. The optimized conditions were 0.4 g/L catalyst, 0.1 mol/L glycerol, and temperature 313.15 K. The response values under optimal conditions were 3.23, 8.17, and 1.15 mM for glyceraldehyde, formaldehyde, and formic acid, respectively. A higher selectivity towards formaldehyde was observed when visible light was used as the radiation source. This study is useful to evaluate the best reaction conditions towards value-added products during the oxidation of glycerol by photocatalysis using Cu/TiO2.

PO4 3- Coordinated Robust Single-Atom Platinum Catalyst for Selective Polyol Oxidation

Achieving efficient catalytic conversion over a heterogeneous catalyst with excellent resistance against leaching is still a grand challenge for sustainable chemical synthesis in aqueous solution. Herein, we devised a single-atom Pt₁ /hydroxyapatite (HAP) catalyst via a simple hydrothermal strategy. Gratifyingly, this robust Pt₁ /HAP catalyst exhibits remarkable catalytic selectivity and catalyst stability for the selective oxidation of C₂ -C₄ polyols to corresponding primary hydroxy acids. It is found that the Pt-(O-P) linkages with strong electron-withdrawing function of PO₄ ^3- (Pt₁ -OPO₄ ^3- pair active site) not only realize the activation of the C-H bond, but also destabilize the transition state from adsorbed hydroxy acids toward the C-C cleavage, resulting in the sharply increased selectivity of hydroxy acids. Moreover, the strong PO₄ ^3- -coordination effect provides electrostatic stabilization for single-atom Pt, ensuring the highly efficient catalysis of Pt₁ /HAP for over 160 hours with superior leaching resistance.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

Production of Hydroxypyruvic Acid by Glycerol Oxidation over Pt/CeO2-ZrO2-Bi2O3-PbO/SBA-16 Catalysts

Pt/CeO2-ZrO2-Bi2O3-PbO/SBA-16 (SBA-16: Santa Barbara Amorphous No. 16) catalysts were synthesized to produce hydroxypyruvic acid by glycerol oxidation. In the catalysts, the introduction of PbO into CeO2-ZrO2-Bi2O3 improved the oxygen release and storage abilities owing to the synergistic redox reaction of Pb2+/4+ and Ce3+/4+, which facilitated the oxidation ability of Pt. In addition, the oxidation of the secondary OH group in glycerol might be accelerated by the geometric effects of glycerol, Pt, and Bi3+ or Pb2+/4+. Furthermore, the moderate reaction conditions such as room temperature and open-air atmosphere enabled the suppression of further oxidation of hydroxypyruvic acid. The highest catalytic activity was obtained for 7 wt% Pt/16 wt% Ce0.60Zr0.15Bi0.20Pb0.05O2−δ/SBA-16, which provided a hydroxypyruvic acid yield maximum of 24.6%, after the reaction for 6 h at 30 °C in atmospheric air.

Valorization of Solketal Synthesis from Sustainable Biodiesel Derived Glycerol Using Response Surface Methodology

Biodiesel production has gained considerable importance over the last few decades due to the increase in fossil fuel prices as well as toxic emissions of oxygen and nitrogen. The production of biodiesel via catalytic transesterification produces crude glycerol as a co-product along with biodiesel, amounting to 10% of the total biodiesel produced. Glycerol has a low value in its impure form, and the purification of glycerol requires sophisticated technologies and is an expensive process. The conversion of crude glycerol into value-added chemicals such as solketal is the best way to improve the sustainability of biodiesel synthesis using the transesterification reaction. Therefore, the conversion of crude glycerol into the solketal was investigated in a batch reactor simulation model developed by the Aspen Plus V11.0. The non-random two liquid theory (NRTL) method was used as a thermodynamic property package to study the effect of four input ketalization parameters. The model was validated with the findings of previous experimental studies of solketal synthesis using sulfuric acid as a catalyst. The influence of the following operating parameters was investigated: reaction time of 10,000 to 60,000 s, reaction temperature of 303 to 323 K, acetone to glycerol molar ratio of 2:1 to 10:1, and catalyst concentration of 0.005 to 0.03 wt %. The optimum solketal yield of 81.36% was obtained at the optimized conditions of 313 K, 9:1, 0.03 wt %, and 40,000 s. The effect of each input parameter on the ketalization process and interaction between input and output parameters was investigated by using the response surface methodology (RSM) optimizer. The relationship between independent and response variables developed by RSM fit most of the simulation data, which showed the accuracy of the model. A second-order differential equation fit the simulation data well and showed an R2 value of 0.99. According to the findings of RSM, the influence of catalyst amount, acetone to glycerol molar ratio, and reaction time were more significant on solketal yield. The effect of temperature on the performance of the reaction was not found to be significant because of the exothermic nature of the process. The findings of this study showed that biodiesel-derived glycerol can be effectively utilized to produce solketal, which can be used for a wider range of applications such as a fuel additive. However, further work is required to enhance the solketal yield by developing new heterogeneous catalysts so that the industrial implementation of its production can be made possible.

1,2—Propanediol Production from Glycerol Derived from Biodiesel’s Production: Technical and Economic Study

For every nine tons of produced biodiesel, there is another ton of glycerol as a byproduct. Therefore, glycerol prices dropped significantly worldwide in recent years; the more significant biodiesel production is, the more glycerol exists as a byproduct. glycerol prices also impact the biodiesel manufacturing business, as it could be sold according to its refinement grade. The primary objective of this work was to evaluate the economic potential of the production of 1,2-propanediol derived from the biodiesel produced in Colombia. A plant to produce 1,2-propanediol via catalytic hydrogenation of glycerol in a trickle-bed reactor was designed. The plant comprised a reaction scheme where non-converted excess hydrogen was recycled, and the heat generated in the reactor was recovered. The reactor effluent was sent to a separation train where 98% m/m purity 1,2-propanediol was attained. Capital and operational costs were estimated from the process simulation. The net present value (NPV) and the modified internal return rate (MIRR) of the plant were used to assess the viability of the process. Their sensitivity to key input variables was evaluated to find the viability limits of the project. The economic potential of the 1,2-propanediol was calculated in USD 1.2/kg; for the base case, the NPV and the MIRR were USD 54.805 million and 22.56%, respectively, showing that, for moderate variations in products and raw material prices, the process is economically viable.

A review on advances in green treatment of glycerol waste with a focus on electro-oxidation pathway

Over the past decades, research efforts are being devoted into utilizing the biomass waste as a major source of green energy to maintain the economic, environmental, and social sustainability. Specifically, there is an emerging consensus on the significance of glycerol (an underutilised waste from biodiesel industry) as a cheap, non-toxic, and renewable source for valuable chemicals synthesis. There are numerous methods enacted to convert this glycerol waste to tartronic acid, mesoxalic acid, glyceraldehyde, dihydroxyacetone, oxalic acid and so on. Among these, the green electro-oxidation technique is one of the techniques that possesses potential for industrial application due to advantages such as non-toxicity process, fast response, and lower energy consumption. The current review covers the general understanding on commonly used techniques for alcohol (C₁ & C₂) conversion, with a specific insight on glycerol (C₃) electro-oxidation (GOR). Since catalysts are the backbone of chemical reaction, they are responsible for the overall economy prospect of any processes. To this end, a comprehensive review on catalysts, which include noble metals, non-noble metals, and non-metals anchored over various supports are incorporated in this review. Moreover, a fundamental insight into the development of future electrocatalysts for glycerol oxidation along with products analysis is also presented.

A proof of concept for cooperation from the quinone groups adjacent to N sites during the metal-free oxidation of glycerol by nitrogen-rich graphene oxide

A catalytic active site already present in an organic molecule was chemically tagged on the GO surface to prove the role of quinone groups adjacent to N sites in nitrogen-rich carbon materials for the metal-free oxidation of glycerol.

Selective oxidation of bio-based platform molecules and their conversion products over metal nanoparticle catalysts: a review

The conversion of bio-renewable raw materials into valuable products (biofuels, bifunctional carbonyls/carboxyls) that serve as the basis for biopolymers, has become one of the most important areas in the development of novel hybrid catalysts.

Chemoenzymatic Synthesis of the New 3-((2,3-Diacetoxypropanoyl)oxy)propane-1,2-diyl Diacetate Using Immobilized Lipase B from Candida antarctica and Pyridinium Chlorochromate as an Oxidizing Agent

To exploit the hydrolytic activity and high selectivity of immobilized lipase B from Candida antarctica on octyl agarose (CALB-OC) in the hydrolysis of triacetin and also to produce new value-added compounds from glycerol, this work describes a chemoenzymatic methodology for the synthesis of the new dimeric glycerol ester 3-((2,3-diacetoxypropanoyl)oxy)propane-1,2-diyl diacetate. According to this approach, triacetin was regioselectively hydrolyzed to 1,2-diacetin with CALB-OC. The diglyceride product was subsequently oxidized with pyridinium chlorochromate (PCC) and a dimeric ester was isolated as the only product. It was found that the medium acidity during the PCC treatment and a high 1,2-diacetin concentration favored the formation of the ester. The synthesized compounds were characterized using IR, MS, HR-MS, and NMR techniques. The obtained dimeric ester was evaluated at 100 ppm against seven bacterial strains and two Candida species to identify its antimicrobial activity. The compound has no inhibitory activity against the bacterial strains used but decreased C. albicans and C. parapsilosis growth by 49% and 68%, respectively. Hemolytic activity was evaluated, and the results obtained support the use of the dimeric ester to control C. albicans and C. parapsilosis growth in non-intravenous applications because the compound shows hemolytic activity.

VAlPOs as Efficient Catalysts for Glycerol Conversion to Methanol

The catalytic activity of a series of vanadium aluminophosphates catalysts prepared by sol-gel method followed by combustion of the obtained gel was evaluated in glycerol conversion towards methanol. The materials were characterized by several techniques such as X-ray diffraction (XRD), UV-vis, Fourier-transform infrared (FTIR), Raman and X-ray photoelectron (XPS) spectroscopies. The amount of vanadium incorporated in aluminophosphates framework played an important role in the catalytic activity, while in the products distribution the key role is played by the vanadium oxidation state on the surface. The sample that contains a large amount of V4+ has the highest selectivity towards methanol. On the sample with the lowest vanadium loading the oxidation path to dihydroxyacetone is predominant. The catalyst with higher content of tetrahedral isolated vanadium species, such V5APO, is less active in breaking the C–C bonds in the glycerol molecule than the one containing polymeric species.

Cu–Al composite oxides: a highly efficient support for the selective oxidation of glycerol to 1,3-dihydroxyacetone

A series of Au catalysts supported on Cu–Al composite oxides were prepared and applied for the selective catalytic oxidation of glycerol to 1,3-dihydroxyacetone (DHA) in base-free conditions.