Bifunctional electrocatalysts for rechargeable Zn-air batteries

Performance of Nitrogen-Doped Carbon Nanoparticles Carrying FeNiCu as Bifunctional Electrocatalyst for Rechargeable Zinc-Air Battery

Catalysts for zinc-air batteries (ZABs) must be stable over long-term charging-discharging cycles and exhibit bifunctional catalytic activity. In this study, by doping nitrogen-doped carbon (NC) materials with three metal atoms (Fe, Ni, and Cu), a single-atom-distributed FeNiCu-NC bifunctional catalyst is prepared. The catalyst includes Fe(Ni-doped)-N4 for the oxygen evolution reaction (OER), Fe(Cu-doped)-N4 for the oxygen reduction reaction (ORR), and the NiCu-NC catalytic structure for the oxygen reduction reaction (ORR) in the nitrogen-doped carbon nanoparticles. This single-atom distribution catalyst structure enhances the bifunctional catalytic activity. If a trimetallic single-atom catalyst is designed, it will surpass the typical bimetallic single-atom catcalyst. FeNiCu-NC exhibits outstanding performance as an electrocatalyst, with a half-wave potential (E1/2) of 0.876 V versus RHE, overpotential (Ej = 10) of 253 mV versus RHE at 10 mA cm-2, and a small potential gap (ΔE = 0.61 V). As the anode in a ZAB, FeNiCu-NC can undergo continuous charge-discharged cycles for 575 h without significant attenuation. This study presents a new method for achieving high-performance, low-cost ZABs via trimetallic single-atom doping.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

Nanoflower-like NiCo2O4 Composite Graphene Oxide as a Bifunctional Catalyst for Zinc-Air Battery Cathode

Developing efficient bifunctional catalysts for nonprecious metal-based oxygen reduction (ORR) and oxygen evolution (OER) is crucial to enhance the practical application of zinc-air batteries. The study harnessed electrostatic forces to anchor the nanoflower-like NiCo2O4 onto graphene oxide, mitigating the poor inherent conductivity in NiCo2O4 as a transition metal oxide and preventing excessive agglomeration of the nanoflower-like structures during catalysis. Consequently, the resulting composite, NiCo2O4-GO/C, exhibited notably superior ORR and OER catalytic performance compared to pure nanoflower-like NiCo2O4. Notably, it excelled in OER catalytic activity of the OER relative to the precious metal RuO2. As a bifunctional catalyst for ORR and OER, NiCo2O4-GO/C displayed a potential difference of 0.88 V between the ORR half-wave potential and the OER potential at 10 mA·cm-2, significantly lower than the 1.08 V observed for pure flower-like NiCo2O4 and comparable to the 0.88 V exhibited by precious metal catalysts Pt/C + RuO2. The NiCo2O4-GO/C-based zinc-air battery demonstrated a discharge capacity of 817.3 mA h·g-1, surpassing that of precious metal-based zinc-air batteries. Moreover, charge-discharge cycling tests indicated the superior stability of the NiCo2O4-GO/C-based zinc-air battery compared to its precious metal-based counterparts.

Bimetal-bridging Nitrogen Coordination in Carbon-based Electrocatalysts for pH-universal Oxygen Reduction

Electrocatalysts with atomically dispersed metal sites (e.g., metal-nitrogen-carbon) have been deemed as promising alternatives for noble-metal catalysts in couples of electrocatalytic reactions. However, the modulation of such atomic sites and the understanding of their interactions are still highly challenging. Herein, we propose a unique supermolecule assembly-profile coating strategy to prepare a series of diatomic electrocatalysts by profile coating of eight Prussian blue analogues (PBAs) on supramolecular supports respectively as bimetallic sources. The detailed microstructure analysis revealed that the metal-nitrogen-carbon sites with four- (Zn-N4 ) and five-coordination (Fe-N5 ) via the nitrogen coordination are similar to the cytochrome c oxidases. For promising electrocatalysis, such unique microstructure is able to activate oxygen molecules due to nitrogen-bonding coordination with bimetal sites, thus leading to efficient four-electron oxygen reduction in alkaline, neutral, and acid electrolytes. Especially, zinc group elements (e.g., Zn and Cd) with d10 electron configuration would significantly boost the nitrogen-bonding coordination with bimetal sites to enhance electrocatalytic activity. The proof-of-concept for the general synthesis of advanced electrocatalysts with controllable bimetal active sites and the mechanistic understanding will promote the promising electrocatalysis by applying the similar principles.

Tetraiodo Fe/Ni phthalocyanine-based molecular catalysts for highly efficient oxygen reduction reaction and oxygen evolution reaction: Constructing a built-in electric field with iodine groups

In this paper, we report on the preparation and catalysis of a bifunctional molecular catalyst (Fe[Pc(I)4]+Ni[Pc(I)4]@NCPDI) for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in rechargeable Zn-air batteries. This catalyst is prepared by self-assembling tetraiodo metal phthalocyanines (Fe[Pc(I)4] and Ni[Pc(I)4]) on a 2D N-doped carbon material (NCPDI) through π-π interactions. The introduction of iodine groups in the edge of phthalocyanines controls the density of electron cloud and electrostatic potential around Fe-N/Ni-N sites and constructs a built-in electric field that facilitates directional transport of charges, enhancing the catalytic activity of the catalyst. Density functional theory (DFT) calculations support this mechanism by showing a reduced energy barrier for the ORR rate-determining step (RDS). The Fe[Pc(I)4]+Ni[Pc(I)4]@NCPDI exhibits excellent performance outperforming 20 wt% Pt/C and single-molecule self-assembled Fe[Pc(I)4]@NCPDI and Ni[Pc(I)4]@NCPDI, with a half-wave potential of E1/2 = 0.940 V in the ORR process under alkaline condition. During the OER process, Fe[Pc(I)4]+Ni[Pc(I)4]@NCPDI exhibited a low overpotential of 298 mV at 10 mA cm-2 under the alkaline condition, which is much better than RuO2, Fe[Pc(I)4]@NCPDI and Ni[Pc(I)4]@NCPDI. The catalyst also demonstrates excellent catalysis and durability in rechargeable Zn-air batteries. This work provides a simple and specific method to develop efficient multifunctional molecular electrocatalysts.

Cobalt Oxide-Based Electrocatalysts with Bifunctionality for High-Performing Rechargeable Zinc-Air Batteries

In recent years, the rapid growth in renewable energy applications has created a significant demand for efficient energy storage solutions on a large scale. Among the various options, rechargeable zinc-air batteries (ZABs) have emerged as an appealing choice in green energy storage technology due to their higher energy density, sustainability, and cost-effectiveness. Regarding this fact, a spotlight is shaded on air electrode for constructing high-performance ZABs. Cobalt oxide-based electrocatalysts on the air electrode have gained significant attention due to their extraordinary features. Particularly, exploration and integration of bifunctional behavior for energy storage has remarkably promoted both ORR and OER to facilitate the overall performance of the battery. The plot of this review is forwarded towards in-depth analysis of the latest advancements in electrocatalysts that are based on cobalt oxide and possess bifunctional properties along with an introduction of the fundamental aspects of ZABs, Additionally, the topic entails an examination of the morphological variations and mechanistic details mentioning about the synthesis processes. Finally, a direction is provided for future research endeavors through addressing the challenges and prospects in the advancement of next-generation bifunctional electrocatalysts to empower high-performing ZABs with bifunctional cobalt oxide.

Visualizing the Interfacial Chemistry in Multivalent Metal Anodes by Transmission Electron Microscopy

Multivalent metal batteries (MMBs) have been considered potentially high-energy and low-cost alternatives to commercial Li-ion batteries, thus attracting tremendous research interest for energy-storage applications. However, the plating and stripping of multivalent metals (i.e., Zn, Ca, Mg) suffer from low Coulombic efficiencies and short cycle life, which are largely rooted in the unstable solid electrolyte interphase. Apart from exploring new electrolytes or artificial layers for robust interphases, fundamental works on deciphering interfacial chemistry have also been conducted. This work is dedicated to summarizing the state-of-the-art advances in understanding the interphases for multivalent metal anodes revealed by transmission electron microscopy (TEM) methods. Operando and cryogenic TEM with high spatial and temporal resolutions realize the dynamic visualization of the vulnerable chemical structures in interphase layers. Following a scrutinization of the interphases on different metal anodes, we elucidate their features for appealing multivalent metal anodes. Finally, perspectives are proposed for the remaining issues on analyzing and regulating interphases for practical MMBs.

Toward the Long-Term Stability of Cobalt Benzoate Confined Highly Dispersed PtCo Alloy Supported on a Nitrogen-Doped Carbon Nanosheet/Fe3C Nanoparticle Hybrid as a Multifunctional Catalyst for Zinc-Air Batteries

This work reports a new type of platinum-based heterostructural electrode catalyst that highly dispersed PtCo alloy nanoparticles (NPs) confined in cobalt benzoate (Co-BA) nanowires are supported on a nitrogen-doped ultra-thin carbon nanosheet/Fe₃C hybrid (PtCo@Co-BA-Fe₃C/NC) to show high electrochemical activity and long-term stability. One-dimensional Co-BA nanowires could alleviate the shedding and agglomeration of PtCo alloy NPs during the reaction so as to achieve satisfactory long-term durability. Moreover, the synergistic effect at the interface optimizes the surface electronic structure and prominently accelerates the electrochemical kinetics. The oxygen reduction reaction half-wave potential is 0.923 V, and the oxygen evolution reaction under the condition of 10 mA•cm^-2 is 1.48 V. Higher power density (263.12 mW•cm^-2), narrowed voltage gap (0.49 V), and specific capacity (808.5 mAh•g^-1) for PtCo@Co-BA-Fe₃C/NC in Zn-air batteries are achieved with long-term cycling measurements over 776 h, which is obviously better than the Pt/C + RuO₂ catalyst. The interfacial electronic interaction of PtCo@Co-BA-Fe₃C/NC is investigated, which can accelerate electron transfer from Fe to Pt. Density functional theory calculations also indicate that the interfacial potential regulates the binding energies of the intermediates to achieve the best performance.

Starch-based porous carbon microsphere composited NiCo2O4 nanoflower as bifunctional electrocatalyst for zinc-air battery

It is significant to explore and design outstanding bifunctional oxygen electrocatalysts to promote the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) in zinc-air batteries. Herein, a novel porous carbon microspheres (CMS₂) modified by NiCo₂O₄ nanoflower (CMS₂-NiCo₂O₄) has been prepared as an ORR and OER catalyst. The hierarchical porous structure of CMS provides high conductivity and abundant active sites for ORR, whereas the synergistic effect of NiCo₂O₄ nanosheets and a small amount of FeZn oxides act as the positive phase for OER. The efficient oxygen catalytic activity is gained by creating a coupling interface between NiCo₂O₄ and CMS. The optimized CMS₂-NiCo₂O₄ shows a half-wave potential of 0.82 V toward ORR and an overpotential of 392 mV toward OER. Particularly, CMS₂-NiCo₂O₄ also exhibits an excellent peak power density (175.5 mW cm^-2) as a catalyst for zinc-air batteries, which is superior to the commercial Pt/C + RuO₂ catalyst (120.5 mW cm^-2), and it also demonstrates a remarkable stability even after the charge-discharge cycles of 167 h. The prepared CMS₂-NiCo₂O₄ is promising for the application of the bimetallic oxide catalyst for zinc-air battery.

Metal-Organic Frameworks (MOFs) Derived Materials Used in Zn-Air Battery

It is necessary to develop new energy technologies because of serious environmental problems. As one of the most promising electrochemical energy conversion and storage devices, the Zn-air battery has attracted extensive research in recent years due to the advantages of abundant resources, low price, high energy density, and high reduction potential. However, the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) of Zn-air battery during discharge and charge have complicated multi-electron transfer processes with slow reaction kinetics. It is important to develop efficient and stable oxygen electrocatalysts. At present, single-function catalysts such as Pt/C, RuO₂, and IrO₂ are regarded as the benchmark catalysts for ORR and OER, respectively. However, the large-scale application of Zn-air battery is limited by the few sources of the precious metal catalysts, as well as their high costs, and poor long-term stability. Therefore, designing bifunctional electrocatalysts with excellent activity and stability using resource-rich non-noble metals is the key to improving ORR/OER reaction kinetics and promoting the commercial application of the Zn-air battery. Metal-organic framework (MOF) is a kind of porous crystal material composed of metal ions/clusters connected by organic ligands, which has the characteristics of adjustable porosity, highly ordered pore structure, low crystal density, and large specific surface area. MOFs and their derivatives show remarkable performance in promoting oxygen reaction, and are a promising candidate material for oxygen electrocatalysts. Herein, this review summarizes the latest progress in advanced MOF-derived materials such as oxygen electrocatalysts in a Zn-air battery. Firstly, the composition and working principle of the Zn-air battery are introduced. Then, the related reaction mechanism of ORR/OER is briefly described. After that, the latest developments in ORR/OER electrocatalysts for Zn-air batteries are introduced in detail from two aspects: (i) non-precious metal catalysts (NPMC) derived from MOF materials, including single transition metals and bimetallic catalysts with Co, Fe, Mn, Cu, etc.; (ii) metal-free catalysts derived from MOF materials, including heteroatom-doped MOF materials and MOF/graphene oxide (GO) composite materials. At the end of the paper, we also put forward the challenges and prospects of designing bifunctional oxygen electrocatalysts with high activity and stability derived from MOF materials for Zn-air battery.

MOF-Derived Co and Fe Species Loaded on N-Doped Carbon Networks as Efficient Oxygen Electrocatalysts for Zn-Air Batteries

Highlights

A novel method is developed to prepare bifunctional oxygen electrocatalysts composed of Co nanoparticles and highly dispersed Fe loaded on N-doped carbon substrates by virtues of metal-organic frameworks and two different doping processes. The designed catalysts show comparable performance with commercial catalysts. Meanwhile, rechargeable Zn-air batteries with prepared catalysts demonstrate high peak power density and good cycling stability. The performance promotion originates from the synergy between Co nanoparticles and highly dispersed Fe, porous structures, large specific areas, and distinct three-dimensional carbon networks.  

Abstract

Searching for cheap, efficient, and stable oxygen electrocatalysts is vital to promote the practical performance of Zn-air batteries with high theoretic energy density. Herein, a series of Co nanoparticles and highly dispersed Fe loaded on N-doped porous carbon substrates are prepared through a “double-solvent” method with in situ doped metal-organic frameworks as precursors. The optimized catalysts exhibit excellent performance for oxygen reduction and evolution reaction. Furthermore, rechargeable Zn-air batteries with designed catalysts demonstrate higher peak power density and better cycling stability than those with commercial Pt/C+RuO2. According to structure characterizations and electrochemical tests, the interaction of Co nanoparticles and highly dispersed Fe contributes to the superior performance for oxygen electrocatalysis. In addition, large specific surface areas, porous structures and interconnected three-dimensional carbon networks also play important roles in improving oxygen electrocatalysis. This work provides inspiration for rational design of advanced oxygen electrocatalysts and paves a way for the practical application of rechargeable Zn-air batteries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40820-022-00890-w.

3D TM-N-C Electrocatalysts with Dense Active Sites for the Membraneless Direct Methanol Fuel Cell and Zn-Air Batteries

Electrocatalysts with high cost-effectiveness for the oxygen reduction reaction (ORR) are essential for fuel cells (FC) and Zn-Air batteries (ZAB), which need highly active sites and suitable carbon substrates to accelerate the charge transfer kinetics. Herein, a simple and extensible method using ball milling and space-confinement pyrolysis is reported to prepare a series of transition metals and N-C catalysts (M-NLPC), which possess three-dimensional porous carbon substrates and dense active sites for efficient ORR. M-NLPC catalysts (especially Fe-NLPC) exhibit outstanding ORR activity with a half-wave potential (E_1/2, 0.88 V) in an alkaline medium, high stability, and strong methanol resistance. The M-N₄ sites are proven to be the active centers in M-NLPC by theoretical calculation, and methanol molecules are more likely to desorb than react on the Fe-N₄ sites, which is the origin of the inactivity for the methanol oxidation reaction (MOR). Furthermore, Fe-NLPC was applied to membraneless alkaline direct methanol FC (DMFC) in practice, exhibiting outstanding performance. Meanwhile, the Fe-NLPC-based ZAB also shows excellent electrochemical performance.

Stabilizing Cobalt Single Atoms via Flexible Carbon Membranes as Bifunctional Electrocatalysts for Binder-Free Zinc-Air Batteries

Single-atom catalysts with high activity and efficient atom utilization have great potential in the electrocatalysis field, especially for rechargeable zinc-air batteries (ZABs). However, it is still a serious challenge to rationally construct a single-atom catalyst with satisfactory electrocatalytic activity and long-term stability. Here, we simultaneously realize the atomic-level dispersion of cobalt and the construction of carbon nanotube (CNT)-linked N-doped porous carbon nanofibers (NCFs) via an electrospinning strategy. In this hierarchical structure, the Co-N₄ sites provide efficient oxygen reduction/evolution electrocatalytic activity, the porous architectures of NCFs guarantee the active site's accessibility, and the interior CNTs enhance the flexibility and mechanical strength of porous fibers. As a binder-free air cathode, the as-prepared catalysts deliver superdurability of 600 h at 10 mA cm^-2 for aqueous ZABs and considerable flexibility and a small voltage gap for all-solid-state ZABs. This work provides an effective single-atom design/nanoengineering for superdurable zinc-air batteries.

Four electron selective O2 reduction by a tetranuclear vanadium(IV/V)/hydroquinonate catalyst: application in the operation of Zn–air batteries

A tetranuclear vanadium(IV/V) hydroquinonate electrocatalyst for oxygen reduction through proton-coupled electron transfer. The complex enhances the current and power of Zn–air batteries.

Cubic core-shell structure of NiCoSx/CoS2 as high-efficiency tri-functional catalyst for Zn-air battery and overall water splitting

Cubic core-shell NiCoSx/CoS2 composite catalyst was successfully prepared on the basis of K3[Co(CN)6]2. First, Ni2+ is substituted for K+ in the K3[Co(CN)6]2 to prepare the binary metal ion precursor of...

FeCo Nanoparticles Encapsulated in N-Doped Carbon Nanotubes Coupled with Layered Double (Co, Fe) Hydroxide as an Efficient Bifunctional Catalyst for Rechargeable Zinc-Air Batteries

Low-cost bifunctional nonprecious metal catalysts toward oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are critical for the commercialization of rechargeable zinc-air batteries (ZABs). However, the preparation of highly active and durable bifunctional catalysts is still challenging. Herein, an efficient catalyst is reported consisting of FeCo nanoparticles embedded in N-doped carbon nanotubes (FeCo NPs-N-CNTs) by an in situ catalytic strategy. Due to the encapsulation and porous structure of N-doped carbon nanotubes, the catalyst shows high activity toward ORR and excellent durability. Furthermore, to enhance the OER activity, CoFe-layer double hydroxide (CoFe-LDH) is coupled with FeCo NPs-N-CNTs by in situ reaction approach. As the air electrode for rechargeable ZABs, the cell with CoFe-LDH@FeCo NPs-N-CNTs catalyst exhibits high open-circuit potential (OCP) of 1.51 V, high power density of 116 mW cm^-2 , and remarkable durability up to 100 h, demonstrating its great promise for the practical application of the rechargeable ZABs.

Three-Dimensional Graphene-Based Macrostructures for Electrocatalysis

Electrochemical energy storage and conversion is an effective strategy to relieve the increasing energy and environment crisis. The sluggish reaction kinetics in the related devices is one of the major obstacles for them to realize practical applications. More efforts should be devoted to searching for high-efficiency electrocatalysts and enhancing the electrocatalytic performance. 3D graphene macrostructures (3D GMs) are one kind of porous crystalline materials with 3D structures at both micro- and macro-scale. The unique structure can achieve large accessible surface area, expose many active sites, promote fast mass/electron transport, and provide wide room for further functional modification. All these features make them promising candidates for electrocatalysis. In this review, the authors focus on the latest progress of 3D GMs for electrocatalysis. First, the preparation methods of 3D GMs are introduced followed by the strategies for functional modifications. Then, their electrocatalytic performances are discussed in detail including monofunctional and bifunctional electrocatalysis. The electrocatalytic processes involve oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and carbon dioxide reduction reaction. Finally, the challenges and perspectives are presented to offer a guideline for the exploration of excellent 3D GM-based electrocatalysts.

Single Co Atoms Implanted into N-Doped Hollow Carbon Nanoshells with Non-Planar Co-N4-1-O2 Sites for Efficient Oxygen Electrochemistry

Facile synthesis of cost-effective carbon-supported Co single atoms (Co-SAs) exhibits huge potential applications in energy storage and conversion devices. We here report the implantation of Co-SAs into hollow carbon spheres (Co-SAs-HCS) via a facile wet-chemistry strategy followed by controlled pyrolysis. Electron-rich histidine acted as a Lewis base effectively immobilizing Co²⁺ (Lewis acid) via the electrostatic effect and hydrogen bonds, thus achieving the scalable synthesis of Co-SAs-HCS. We constructed a series of histidine-Co²⁺ structure models to elucidate the formation of histidine-Co²⁺ complexes by analyzing their binding energy. X-ray absorption fine-structure results verify that central Co atoms with four N coordination atoms possess a non-planar Co-N₄ structure. Electrochemical results indicate that the as-prepared Co-SAs-HCS catalyst shows a low potential difference (0.809 V) between the oxygen evolution reaction potential at 10 mA cm^-2 and the oxygen reduction reaction half-wave potential, outperforming the commercial Pt/C catalysts (0.996 V). Moreover, an assembled Zn-air battery based on Co-SAs-HCS exhibits an unexpected long-term durability. We have demonstrated that non-planar Co-N₄-1-O₂ sites are the source for highly efficient adsorption and dissociation of O₂ molecules and then reduction of the free energy of desorption of the intermediates by density functional theory. Our findings provide a new design insight into the exploration of advanced electrocatalysts, which will be applied in the design of green energy devices in the future.

Co-Zn-MOFs Derived N-Doped Carbon Nanotubes with Crystalline Co Nanoparticles Embedded as Effective Oxygen Electrocatalysts

The oxygen reduction reaction (ORR) is a crucial step in fuel cells and metal-air batteries. It is necessary to expand the range of efficient non-precious ORR electrocatalysts on account of the low abundance and high cost of Pt/C catalysts. Herein, we synthesized crystalline cobalt-embedded N-doped carbon nanotubes (Co@CNTs-T) via facile carbonization of Co/Zn metal-organic frameworks (MOFs) with dicyandiamide at different temperatures (t = 600, 700, 800, 900 °C). Co@CNTs- 800 possessed excellent ORR activities in alkaline electrolytes with a half wave potential of 0.846 V vs. RHE (Reversible Hydrogen Electrode), which was comparable to Pt/C. This three-dimensional network, formed by Co@CNTs-T, facilitated electron migration and ion diffusion during the ORR process. The carbon shell surrounding the Co nanoparticles resulted in Co@CNTs-800 being stable as an electrocatalyst. This work provides a new strategy to design efficient and low-cost oxygen catalysts.

Transition metal nitrides for electrochemical energy applications

This review comprehensively summarizes the progress on the structural and electronic modulation of transition metal nitrides for electrochemical energy applications.

Construction of a three-dimensional S,N co-doped ZIF-67 derivative assisted by PEDOT nanowires and its application in rechargeable Zn–air batteries

PEDOT nanowires were obtained before pyrolysis to inhibit structural collapse and anisotropic shrinkage of the ZIF-67 in the pyrolysis process, and S,N co-doping is realized at the same time. The synthesized Co/C@NS NWs exhibit excellent performance towards ORR and OER.

Metal-organic framework based bifunctional oxygen electrocatalysts for rechargeable zinc-air batteries: current progress and prospects

Zinc-air batteries (ZABs) are regarded as ideal candidates for next-generation energy storage equipment due to their high energy density, non-toxicity, high safety, and environmental friendliness. However, the slow oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics on the air cathode limit their efficiency and the development of highly efficient, low cost and stable bifunctional electrocatalysts is still challenging. Metal-Organic Framework (MOF) based bifunctional oxygen electrocatalysts have been demonstrated as promising alternative catalysts due to the regular structure, tunable chemistry, high specific surface area, and simple and easy preparation of MOFs, and great progress has been made in this area. Herein, we summarize the latest research progress of MOF-based bifunctional oxygen electrocatalysts for ZABs, including pristine MOFs, derivatives of MOFs and MOF composites. The effects of the catalysts' composites, morphologies, specific surface areas and active sites on catalytic performances are specifically addressed to reveal the underlying mechanisms for different catalytic activity of MOF based catalysts. Finally, the main challenges and prospects for developing advanced MOF-based bifunctional electrocatalysts are proposed.

One-step ultrasonic synthesis of Co/Ni-catecholates for improved performance in oxygen reduction reaction

The inherent periodically arranged M-N_X, M-S_X and M-O_X units (M are usually Fe, Co, Ni, etc.) in metal-organic frameworks (MOFs) can be promising active centers in electrocatalysis. In previous studies, MOFs were usually constructed by energy-consuming hydro- or solvo-thermal reactions. Ultrasonic synthesis is a rapid and environment-friendly technique when envisaging MOFs' industrial applications. In addition, different synthetic pathways for MOFs may lead to difference in their microstructure, resulting in different electrocatalytic performance. Nevertheless, only a handful of MOFs were successfully prepared by ultrasonic synthesis and few were applied in electrochemical catalysis. Herein, we constructed Ni/Co-catecholates (Ni/Co-CATs) synthesized by one-step ultrasonic method (250 W, 40 KHz, 25 W/L, Ultrasonic clearing machine) and compared their performance in oxygen reduction reaction (ORR) with that of Ni/Co-CATs synthesized by hydrothermal method. Ni-CAT and Co-CAT prepared by ultrasonic showed the half-wave potential of -0.196 V and -0.116 V (vs. Ag/AgCl), respectively. The potentials were more positive than those prepared by hydro-thermal method. And they showed excellent electrochemical stability in neutral solution. The latter was only 32 mV lower than that of commercial Pt/C. The improved performance in ORR was attributed to higher specific surface area and mesopore volume as well as more structural defects generated in the ultrasonic synthesis process, which could facilitate their exposure of electrocatalytic active sites and their mass transport. This work gives some perspective into cost-effective synthetic strategies of efficient MOFs-based electrocatalysts.

A Flow-Through Membraneless Microfluidic Zinc-Air Cell

In this work, the proof of concept of a functional membraneless microfluidic Zn-air cell (μZAC) that operates with a flow-through arrangement is presented for the first time, where the activity and durability can be modulated by electrodepositing Zn on porous carbon electrodes. For this purpose, Zn electrodes were obtained using chronoamperometry and varying the electrodeposition times (20, 40, and 60 min), resulting in porous electrodes with Zn thicknesses of 3.3 ± 0.3, 11.6 ± 2.4, and 34.8 ± 5.1 μm, respectively. Pt/C was initially used as the cathode to analyze variables, such as KOH concentration and flow rate, and then, two manganese-based materials were evaluated (α-MnO₂ and MnMn₂O₄ spinel, labeled as Mn₃O₄) to determine the effect of inexpensive materials on the cell performance. According to the transmission electron microscopy (TEM) results, α-MnO₂ has a nanorod-like shape with a diameter of 11 ± 1.5 nm, while Mn₃O₄ presented a hemispherical shape with an average particle size of 22 ± 1.8 nm. The use of α-MnO₂ and Mn₃O₄ cathodic materials resulted in cell voltages of 1.39 and 1.35 V and maximum power densities of 308 and 317 mW cm^-2, respectively. The activities of both materials were analyzed through density of state calculations; all manganese species in the α-material MnO₂ presented an equivalent density of states with a reduced orbital occupation to the left of the Fermi energy, which allowed for better global performance above Mn₃O₄/C and Pt/C.