Amine formylation with CO2 and H2 catalyzed by heterogeneous Pd/PAL catalyst

Controllable Active Intermediate in CO2 Hydrogenation Enabling Highly Selective N,N-Dimethylformamide Synthesis via N-Formylation

N,N-Dimethylformamide (DMF) is a widely used solvent, and its green and low-carbon synthesis methods are in high demand. Herein, we report a new approach for DMF synthesis using a continuous flow reaction system with a fixed-bed reactor and a ZnO-TiO2 solid solution catalyst. This catalyst effectively utilizes CO2, H2, and dimethylamine (DMA) as feedstocks, demonstrating performance with 99% DMF selectivity and single-pass DMA conversion approaching thermodynamic equilibrium. Moreover, the catalyst demonstrates good stability, with no signs of deactivation over 1000 h of continuous operation. The key to superior activity lies in the synergetic effect of the Zn and Ti sites, which facilitates the formation of active formate species. These species act as crucial intermediates, reacting with DMA to produce DMF. Importantly, the slow hydrogenation kinetics of the formate species prevent the formation of CH2O* species, thereby suppressing the formation of the undesired byproduct, trimethylamine. This work underscores the potential of kinetically controlling active intermediates in CO2 hydrogenation to prepare high-value-added chemicals by coupling them to platform molecules. It presents a promising strategy for the efficient utilization of CO2 resources and offers a valuable solution for large-scale DMF synthesis.

Schiff Base-Mediated Dual Active Site Catalyst for Efficient N-Formylation of Amines with CO2

Using CO2 as the C1 source for N-formylation of amine is a crucial energy-storage pathway to address the greenhouse effect while generating high-value-added chemicals but is limited by the activation of inert molecules. Herein, a dual active site catalyst with high CO2 activation and dihydrogen dissociation capacity was fabricated by incorporating a Schiff base and Au nanoparticles (NPs) on silicon dioxide (SiO2). The modification of the Schiff base not only provides an alkaline environment for CO2 absorption but also stabilizes Au NPs in a small and highly dispersed state, which regulates the electronic density of the metal for excellent H2 cleavage. The Schiff base-mediated Au catalyst significantly increased the yield of N-formylmorpholine from 3.9% in unmodified Au/SiO2 to 83.3% without the addition of any other additives. This work provides a new avenue for designing multisite catalysts by supporting surface modification to achieve simultaneous activation of multiple target substrates for synergistic catalysis.

Recent Advances on the Functionalities of Polyoxometalate-Based Ionic Liquids

Polyoxometalate (POM)-based ionic liquids (POM-ILs) are gaining increasing attention due to their diverse structures and functionalities. POMs in POM-ILs not only act as essential structural building blocks but also play a crucial role in their functional performance. With the incorporation of POMs, POM-ILs find applications in various fields such as chemical catalysis, energy science, materials science, sensors, and more. The abundant availability of POMs and other building blocks in POM-ILs, along with their versatile combination possibilities, present promising opportunities for the future. Rather than focusing solely on discovering new structures of POM-ILs, current developments in this field emphasize exploring their functions, leading to the emergence of numerous new applications. Summarizing these advancements aids in understanding the latest trends and facilitates rapid evolution. This review examines the recent five years' worth of results to analyze the new functions of POM-ILs, categorizing them based on their unique characteristics.

Aerobic Oxidative Synthesis of Formamides from Amines and Bioderived Formyl Surrogates

Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g-C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cuphen/C3N4 catalysts. EPR spin trapping experiments disclosed ⋅OOH radicals as reactive oxygen species and ⋅NR1R2 radicals being responsible for the initial C-C bond cleavage. Control experiments and DFT calculations showed that the successive C-C bond cleavage in DHA proceeds via a reaction mechanism co-mediated by ⋅NR1R2 and ⋅OOH radicals based on the well-equilibrated CuII and CuI cycle. Our catalyst has much higher activity (TOF) than those based on noble metals.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.

N-Formylation of amines utilizing CO2 by a heterogeneous metal–organic framework supported single-site cobalt catalyst

Single-site cobalt-hydride supported on oxo-nodes of a porous aluminium metal–organic framework is a chemoselective and reusable catalyst for N-formylation of amines using CO2.

Highly Efficient Heterogeneous Pd@POPs Catalyst for the N-Formylation of Amine and CO2

Utilization of CO2 for the production of fine chemicals has become a research hotspot for a long time. In order to make use of CO2, we developed a highly efficient heterogeneous catalyst (denoted as Pd@POPs) for the N-formylation reaction of amine and CO2 under mild conditions. The Pd catalyst was based on a porous organic polymer derived from the solvothermal polymerization of vinyl-functionalized PPh3. A series of characterizations and comparative experiments demonstrated that the Pd@POPs catalyst has high BET (Brunauer-Emmett-Teller) surface areas, hierarchical pore structure, and uniform dispersion of Pd active sites resulting from the formation of strong coordination bonds between Pd species and P atoms in the porous organic polymer (POP) support. In addition to the excellent activity, the Pd@POPs catalyst shows good stability for the N-formylation reaction of amine and CO2.

A novel and robust heterogeneous Cu catalyst using modified lignosulfonate as support for the synthesis of nitrogen-containing heterocycles

A waste biomass, sodium lignosulfonate, was treated with sodium 2-formylbenzenesulfonate, and the phenylaldehyde condensation product was then used as a robust supporting material to immobilize a copper species. The so-obtained catalyst was characterized by many physicochemical methods including FTIR, EA, FSEM, FTEM, XPS, and TG. This catalyst exhibited excellent catalytic activity in the synthesis of nitrogen-containing heterocycles such as tricyclic indoles bearing 3,4-fused seven-membered rings, 2‑arylpyridines, aminonaphthalenes and 3-phenylisoquinolines. In addition, this catalyst showed to be recyclable and could be reused several times without significant loss in activity during the course of the reaction process.