Sustainable synthesis of supported metal nanocatalysts for electrochemical hydrogen evolution

Synergistic effects of CuS/TiO2 heterointerfaces: Enhanced cathodic CO2 reduction and anodic CH3OH oxidation for paired electrosynthesis of formate

The electrochemical reduction of carbon dioxide into energy-carrying compounds or value-added chemicals is of great significance for diminishing the greenhouse effect. However, it is still imperative to replace the less-value anodic oxygen evolution reaction (OER) to improve the technical economy. Herein, we firstly reported a bifunctional CuS/TiO2 catalyst for both anodic methanol oxidation reaction (MOR) and cathodic carbon dioxide reduction (CO2R). The in-built abundant CuS/TiO2 heterointerfaces are found to boost the CO2R and MOR to produce formate. Based on the unique bifunctionality of CuS/TiO2, a paired electrosynthesis of formate was performed with a total Faradaic efficiency (FE) of about 170 %, in which the cathodic CO2R achieved a formate FE of about 70 %, and the anodic MOR exhibited an almost 100 % formate FE.

Interstitial Hydrogen Atom to Boost Intrinsic Catalytic Activity of Tungsten Oxide for Hydrogen Evolution Reaction

Tungsten oxide (WO₃ ) is an appealing electrocatalyst for the hydrogen evolution reaction (HER) owing to its cost-effectiveness and structural adjustability. However, the WO₃ electrocatalyst displays undesirable intrinsic activity for the HER, which originates from the strong hydrogen adsorption energy. Herein, for effective defect engineering, a hydrogen atom inserted into the interstitial lattice site of tungsten oxide (H_0.23 WO₃ ) is proposed to enhance the catalytic activity by adjusting the surface electronic structure and weakening the hydrogen adsorption energy. Experimentally, the H_0.23 WO₃ electrocatalyst is successfully prepared on reduced graphene oxide. It exhibits significantly improved electrocatalytic activity for HER, with a low overpotential of 33 mV to drive a current density of 10 mA cm^-2 and ultra-long catalytic stability at high-throughput hydrogen output (200 000 s, 90 mA cm^-2 ) in acidic media. Theoretically, density functional theory calculations indicate that strong interactions between interstitial hydrogen and lattice oxygen lower the electron density distributions of the d-orbitals of the active tungsten (W) centers to weaken the adsorption of hydrogen intermediates on W-sites, thereby sufficiently promoting fast desorption from the catalyst surface. This work enriches defect engineering to modulate the electron structure and provides a new pathway for the rational design of efficient catalysts for HER.

Synergetic Function of the Single-Atom Ru-N4 Site and Ru Nanoparticles for Hydrogen Production in a Wide pH Range and Seawater Electrolysis

Hydrogen production by water splitting and seawater electrolysis is a promising alternative to develop clean hydrogen energy. The construction of high-efficiency and durable electrocatalysts for the hydrogen evolution reaction (HER) in a wide pH range and seawater is critical to overcoming the sluggish kinetic process. Herein, we develop an efficient catalytic material composed of a single-atom Ru-N₄ site and Ru nanoparticles anchored on nitrogen-doped carbon (Ru_1+NPs/N-C) through the coordination-pyrolysis strategy of the melamine formaldehyde resin. The Ru_1+NPs/N-C catalyst shows outstanding HER activity with the smallest overpotentials, the lowest Tafel slopes, the highest mass activity and turnover frequency, as well as excellent stability in both acidic and alkaline media. Moreover, Ru_1+NPs/N-C shows comparable hydrogen production performance and a higher faradic efficiency to 20% Pt/C in natural seawater and artificial simulated seawater. Theoretical calculations demonstrate that the strong synergistic effects between the Ru-N₄ site and Ru nanoparticles modify the electronic structure to accelerate the HER kinetics. Ru nanoparticles can effectively realize dissociation of H₂O to generate adsorbed hydrogen and also promote the single-atom Ru-N₄ site to combine adsorbed hydrogen to H₂ and desorption. This work provides a new perspective for designing high-efficiency hydrogen production electrocatalysts for large-scale seawater electrolysis.

Systematic Engineering on Ni-Based Nanocatalysts Effectively Promote Hydrogen Evolution Reaction

Designing a synthesis of ultra-small Ni-based nanomaterials with high intrinsic activity and stability in alkaline hydrogen evolution reaction (HER) is a major challenge. Herein, a series of noble metal doped ultra-small size (4 nm) M-Ni/NiO nanoparticles supported on CNT are rationally designed by a solvent-free microwave reduction method that is fast (60 s), simple, includes no surfactants, extensive (>1 g), and has high yield (82.7%). The Ir-Ni/NiO@CNT has superior performance with a low overpotential of 24.6 mV at 10 mA cm^-2 . In addition, the turnover frequency (TOF) value up to 2.51 s^-1 and the exchange current density reaches 4.34 mA cm^-2 , indicating that the catalyst has better intrinsic catalytic activity. It is further proved by density functional theory (DFT) that the NiO surface is conducive to the adsorption of OH* in the Volmer step while the Ni is inclined to adsorb H*, which synergistically promotes the water-splitting reaction, thereby increasing the catalytic rate of HER. It is believed that this work will provide valuable contributions and inspirations toward the large-scale production of high-performance Ni-based electrocatalysts for HER.

Mechanistic insights into H2 evolution via water splitting at the expense of B2(OH)4: a theoretical study

H₂ has been comprehensively deemed a promising potential candidate to replace traditional fossil fuel-based energy. Typically, the hydrolysis of most hydrogen-rich boron hydrides (e.g. NaBH₄, NH₃BH₃ and Me₂NHBH₃) catalyzed by nanomaterials generates H₂ with only one H atom supplied by water and the other one by a hydrogen-rich boron hydride. Interestingly, both H atoms of produced H₂ are provided by water upon hydrolysis of B₂(OH)₄. Herein, the catalytic mechanisms of H₂ evolution upon water splitting at the expense of B₂(OH)₄ in its hydrolysis reactions catalyzed by acid, base or metal nanoparticles have been investigated by density functional theory (DFT) calculations. By computational studies, the mechanisms of catalysis by base and metal nanoparticles are basically the same as those speculated from our previous experiments. The previously proposed acid catalytic mechanism has been overturned, however. This study not only provides important insights into the catalytic mechanism for water splitting at the expense of B₂(OH)₄, but also opens up an exciting opportunity to use water to store H₂.

Mixture Phases Engineering of PtFe Nanofoams for Efficient Hydrogen Evolution

Phase engineering is a promising but challenging approach to construct PtFe-based catalysts with efficient hydrogen evolution reaction (HER) performance. Herein, the authors successfully synthesize PtFe nanofoams with face center cubic (fcc) phase, with simple cubic crystalline (scc) phase and with the mixture phases of fcc and scc phases (PtFe-mix) by hydrogen-assisted calcination for the first time. By benchmarking the HER activity, PtFe-mix exhibits excellent activity in 1.0 m KOH, requiring an overpotential of 28 mV to achieve 10 mA cm^-2 , which is better than the commercial Pt/C (34 mV). PtFe-mix also possesses remarkable stability up to 24 h. Density functional theory calculations further verify that PtFe-mix shows a more suitable d-band center and lower energy barrier for the initial water dissociation, facilitating the HER process. This work provides a meaningful strategy to design PtFe-based catalysts with efficient activity for hydrogen evolution.

Insights into Antiperovskite Ni3 In1-x Cux N Multi-Crystalline Nanoplates and Bulk Cubic Particles as Efficient Electrocatalysts on Hydrogen Evolution Reaction

Intrinsic hydrogen evolution reaction (HER) activity and the mechanism of antiperovskite Ni₃ In_1-x Cu_x N bulk cubic particles and multi-crystalline nanoplates are thoroughly investigated. Stoichiometric Ni₃ In_0.6 Cu_0.4 N reaches the best HER performance, with an overpotential of 102 mV in its multi-crystalline nanoplates obtained from the LDH-derived method, and 143 mV in its bulk cubic particles from the citric method. DFT calculation reveals that Ni-In or Ni-Cu paired on the (100) plane serve as primary active sites. The Ni-Cu pair exhibits stronger OH* and H* affinity that correspondingly reduce OH* and H* adsorption free energy. Introducing specific amounts of the Ni-Cu pair, that is In:Cu = 0.6:0.4 in Ni₃ In_0.6 Cu_0.4 N, can optimize OH* and H* adsorption free energy to facilitate water dissociation in the HER process, while avoiding OH* adsorption getting too strong to block active sites. Besides, Ni₃ In_0.6 Cu_0.4 N turns the water adsorption step spontaneous, which may be attributed to the shifted d-band center and polarizing effect from surface In-Cu charge distribution. This work expands the scope for material design in an antiperovskite system by tailoring the chemical components and morphology for optimal reaction free energy and performance.

Vanadium doped FeP nanoflower with optimized electronic structure for efficient hydrogen evolution

Reasonable design of hydrogen evolution reaction (HER) electrocatalyst from the perspective of electronic structure is a vital way to optimize the catalytic activity. Mono-metallic iron-based phosphates have been shown to be active toward HER, but their performance remains unsatisfactory despite their abundant reserves and low preparation cost. Here, guided by the d-band center and band structure theories, V-doped FeP nanoflower grown directly on iron foam are constructed. Combining the density functional theory (DFT) simulations with physical characterizations reveal that the enhanced HER activity is mainly attributed to the lowed d-band central position, increased water dissociation capacity, decreased hydrogen formation energy barrier and reduced charge transfer impedance. As a HER catalyst in 1 M KOH, the obtained V-FeP shows low overpotentials of ∼149, ∼246 and ∼290 mV to deliver the current densities of 100, 500 and 1000 mA cm^-2 with at least 24 h. When coupled with other highly active oxygen evolution reaction (OER) catalyst (NiFe-LDH/IF), the NiFe-LDH/IF⁽⁺⁾ || V-FeP/IF^(-) pair also performs a low cell voltage and over 100-h stability at high current density of 1000 mA cm^-2, which endows it a large potential in the practical electrolytic water industry. Our work may provide a reference for the enhancement of inert and low-cost HER-active iron phosphide.

N, P-doped carbon supported ruthenium doped Rhenium phosphide with porous nanostructure for hydrogen evolution reaction using sustainable energies

Developing efficient and cost-effective catalysts for hydrogen evolution reaction (HER) is vital to hydrogen energy's commercial applications. In this study, N,P-doped carbon supported ruthenium (Ru) doped triruthenium tetraphosphide (Re₃P₄) (Ru-Re₃P₄/NPC) with porous nanostructure is prepared using the low-toxic melamine phosphate as the carbon and phosphorous source. The in-situ generated N,P-doped carbon layers play a pivotal role in regulating the electrocatalytic activity by avoiding the aggregation of the nanoparticles and increasing the specific surface area. Moreover, Ru doping contributes to the remarkable electrocatalytic performance of the prepared nanomaterials. Impressively, the as-synthesized Ru-Re₃P₄/NPC presents remarkable electrocatalytic performances toward HER with small overpotentials of 39 mV, 115 mV, and 88 mV to deliver 10 mA cm^-2 in alkaline, neutral, and acidic media. Moreover, the prepared electrocatalyst can drive water-splitting with a small potential of 1.45 V@10 mA cm^-2 and use sustainable energies, including solar, wind, and thermal, as electric resources. This work paves a novel and valuable way to enhance the electrocatalytic performances of metal phosphides.

Pd, Rh and Ru Nanohybrid-catalyzed Tetramethyldisiloxane Hydroysis for H2 Generation, Nitrophenol Reduction and Suzuki-Miyaura Cross-Coupling

The hydrolysis of tetramethyldisiloxane, which is a silicone industrial refuse, provides a convenient method to generates H2 on demand. Herein, the highly selective and efficient 2D graphene-like carbon nanosheets (GCN)...

Synergistic catalytic hydrolysis of ammonia borane to release hydrogen over AgCo@CN

Synergistic catalytic AB hydrolysis to generate hydrogen was achieved over AgCo@CN synthesized by auto-reduction between Co@CN and a Ag precursor.

Demonstration of Controlled Hydrogen Release Using Rh@GQDs during Hydrolysis of NH3BH3

Achieving the controlled release of H₂ through an effective approach still faces many challenges. Herein, high-quality graphene quantum dots (GQDs) are synthesized from a new precursor, 1,2,4-trihydroxy benzene, and a multifunctional platform of Rh@GQDs is further developed for the controlled H₂ evolution upon the hydrolysis of NH₃BH₃ (AB). More importantly, the designing concepts of multistep and stepless speed controls have been introduced in the domains of both H₂ evolution for the first time. Through a novel designing protocol, the rate of H₂ evolution can be freely regulated and constantly varied on demand by means of chelation between Zn²⁺ and ethylene diamine tetraacetic acid (EDTA). The density functional theory calculation indicates that Zn²⁺ has the priority to be adsorbed onto Rh(100) due to its larger adsorption energy (107.98 kcal·mol^-1) than that of AB (36.36 kcal·mol^-1). A controlling mechanism is presented such that Zn²⁺ will cover the active sites of the nanocatalyst to prevent the H₂ evolution, and EDTA can chelate Zn²⁺ to reactivate the nanocatalyst for the production of H₂, greatly facilitating use of this strategy in other catalytic reactions. Moreover, it is demonstrated that the protocol is equally valid for diverse hydrogen storage materials. Therefore, this work not only establishes whole new concepts for the controlled production of H₂ but also explains their mechanism, thus remarkably advancing the utilization of H₂ energy and significantly enlightening the controlled process of catalysis.

Tetramethylguanidine-functionalized melamine as a multifunctional organocatalyst for the expeditious synthesis of 1,2,4-triazoloquinazolinones

Novel nano-ordered 1,1,3,3-tetramethylguanidine-functionalized melamine (Melamine@TMG) organocatalyst was prepared and adequately identified by various techniques including FTIR, EDX, XRD and SEM spectroscopic or microscopic methods as well as TGA and DTG analytical methods. The Melamine@TMG, as an effective multifunctional organocatalyst, was found to promote smoothly the three-component synthesis of 1,2,4-triazoloquinazolinone derivatives using cyclic dimedone, 3-amino-1,2,4-triazole and different benzaldehyde derivatives in EtOH at 40 °C. This practical method afforded the desired products in high to excellent yields (86-99%) and short reaction times (10-25 min). The main advantages of this new method are the use of heterogeneous multifunctional nanocatalyst, simple work-up procedure with no need for chromatographic purification, highly selective conversion of substrates and recyclability of the catalyst, which could be used in five consecutive runs with only a small decrease in its activity.

Strong electrostatic adsorption-engaged fabrication of sub-3.0 nm PtRu alloy nanoparticles as synergistic electrocatalysts toward hydrogen evolution

Alloying of Pt with Ru to form ultrafine and well-defined PtRu alloy nanoparticles (NPs) for synergistically electrocatalytic hydrogen evolution is highly desirable but remains a synthetic challenge. Here, we report a strong electrostatic adsorption (SEA)-assisted fabrication of ultrafine and homogeneously distributed PtRu alloy NPs using ethylenediaminetetraacetic acid tetrasodium-derived carbon (EC) as a matrix. The O, N-rich EC with a hierarchically macro/meso/microporous structure and the SEA-assisted formation of the [Ru(bpy)₃][PtCl₆] complex ensure the successful generation of ultrasmall PtRu alloy NPs (2.93 nm in diameter) with high dispersion. The optimal PtRu/EC-700 delivers excellent electrocatalytic properties with an ultralow overpotential (η₁₀ = 18 mV), robust durability and good long-term stability for the alkaline hydrogen evolution reaction (HER). The ultrasmall PtRu alloy NPs with rich surface sites, the synergistic catalysis effect between Pt and Ru and the hierarchically macro/meso/microporous structure of O, N-rich EC cooperatively enhance the HER performance of PtRu/EC-700. This study provides an easy but effective way to construct metal alloy NPs with an ultrafine size and high dispersity for catalytic applications.

Asymmetrically strained hcp rhodium sublattice stabilized by 1D covalent boron chains as an efficient electrocatalyst

Intermetallic rhodium boride (RhB) comprising an asymmetrically strained hcp Rh sublattice is synthesized. The covalent interaction of interstitial boron atoms is found to be the main contributor to the generation of asymmetric strains and the stabilization of the hcp Rh sublattice. In addition, RhB is identified as a hydrogen-evolving eletrocatalyst with Pt-like activity, because the Rh(d)-B(s,p) orbital hybridization induces an optimized electronic structure.

Ultrafine Pd Nanoparticles Supported on Soft Nitriding Porous Carbon for Hydrogen Production from Hydrolytic Dehydrogenation of Dimethyl Amine-Borane

Simple and efficient synthesis of a nano-catalyst with an excellent catalytic property for hydrogen generation from hydrolysis of dimethyl amine-borane (DMAB) is a missing piece. Herein, effective and recycled palladium (Pd) nanoparticles (NPs) supported on soft nitriding porous carbon (NPC) are fabricated and applied for DMAB hydrolysis. It is discovered that the soft nitriding via a low-temperature urea-pretreatment induces abundant nitrogen-containing species on the NPC support, thus promoting the affinity of the Pd precursor and hindering the agglomeration of formed Pd NPs onto the NPC surface during the preparation process. Surface-clean Pd NPs with a diameter of sub-2.0 nm deposited on the NPC support (Pd/NPC) exhibit an outstanding catalytic performance with a turnover frequency (TOF) of 2758 h^-1 toward DMAB hydrolysis, better than many previous reported Pd-based catalysts. It should be emphasized that the Pd/NPC also possesses a good stability without an obvious decrease in catalytic activity for DMAB hydrolysis in five successive recycling runs. This study provides a facile but efficient way for preparing high-performance Pd catalysts for catalytic hydrogen productions.