Strategies to improve electrocatalytic and photocatalytic performance of two-dimensional materials for hydrogen evolution reaction

Interfacial charge transfer in sheet Ni2P-FePx heterojunction to promote the study of electrocatalytic oxygen evolution

The substantial expense associated with catalysts significantly hampers the progress of electrolytic water-based hydrogen production technology. There is an urgent need to find non-precious metal catalysts that are both cost-effective and highly efficient. Here, the porous Ni2P-FePx nanomaterials were successfully prepared by hydrothermal method, nickel foam as the base, iron nitrate solution as the caustic agent and iron source, and finally phosphating at low temperature. The obtained porous Ni2P-FePx nanosheets showed excellent catalytic activity under alkaline PH = 14, and an overpotential of merely 241 mV was required to achieve a current density of 50 mA cm-2. The morphology of the nanosheet can still be flawlessly presented on the screen after 50 h of working at high current density.

2D nanocomposite materials for HER electrocatalysts - a review

Hydrogen energy has the potential to be a cost-effective and strong technology for brighter development. Hydrogen fuel production by water electrolyzers has attracted attention. 2D nanocomposites with distinctive properties have been extensively explored for various applications from hydrogen evolution reactions to improving the efficiency of water electrolyzer, which is the most eco-friendly, and high-performance for hydrogen production. Recently, typical 2D nanocomposites such as Metal-Free 2D, TMDs, Mxene, LDH, organic composites, and Heterostructure have recently been thoroughly researched for use in the HER. We discuss effective ways for increasing the HER efficiency of 2D catalysts in this paper, And the unique advantages and mechanisms for specific applications are highlighted. Several essential regulating strategies for developing 2D nanocomposite-based HER electrocatalysts are included such as interface engineering, defect engineering, heteroatom doping, strain & phase engineering, and hybridizing which improve HER kinetics, the electrical conductivity, accessibility to catalytic active sites, and reaction energy barrier can be optimized. Finally, the future prospects for 2D nanocomposites in HER are discussed, as well as a thorough overview of a variety of methodologies for designing 2D nanocomposites as HER electrocatalysts with excellent catalytic performance. We expect that this review will provide a thorough overview of 2D nanocatalysts for hydrogen production.

Recent Advances in Engineering of 2D Materials-Based Heterostructures for Electrochemical Energy Conversion

2D materials, such as graphene, transition metal dichalcogenides, black phosphorus, layered double hydroxides, and MXene, have exhibited broad application prospects in electrochemical energy conversion due to their unique structures and electronic properties. Recently, the engineering of heterostructures based on 2D materials, including 2D/0D, 2D/1D, 2D/2D, and 2D/3D, has shown the potential to produce synergistic and heterointerface effects, overcoming the inherent restrictions of 2D materials and thus elevating the electrocatalytic performance to the next level. In this review, recent studies are systematically summarized on heterostructures based on 2D materials for advanced electrochemical energy conversion, including water splitting, CO2 reduction reaction, N2 reduction reaction, etc. Additionally, preparation methods are introduced and novel properties of various types of heterostructures based on 2D materials are discussed. Furthermore, the reaction principles and intrinsic mechanisms behind the excellent performance of these heterostructures are evaluated. Finally, insights are provided into the challenges and perspectives regarding the future engineering of heterostructures based on 2D materials for further advancements in electrochemical energy conversion.

First Principles Study of the Photoelectric Properties of Alkaline Earth Metal (Be/Mg/Ca/Sr/Ba)-Doped Monolayers of MoS2

The energy band structure, density of states, and optical properties of monolayers of MoS2 doped with alkaline earth metals (Be/Mg/Ca/Sr/Ba) are systematically studied based on first principles. The results indicate that all the doped systems have a great potential to be formed and structurally stable. In comparison to monolayer MoS2, doping alkaline earth metals results in lattice distortions in the doped system. Therefore, the recombination of photogenerated hole-electron pairs is suppressed effectively. Simultaneously, the introduction of dopants reduces the band gap of the systems while creating impurity levels. Hence, the likelihood of electron transfer from the valence to the conduction band is enhanced, which means a reduction in the energy required for such a transfer. Moreover, doping monolayer MoS2 with alkaline earth metals increases the static dielectric constant and enhances its polarizability. Notably, the Sr-MoS2 system exhibits the highest value of static permittivity, demonstrating the strongest polarization capability. The doped systems exhibit a red-shifted absorption spectrum in the low-energy region. Consequently, the Be/Mg/Ca-MoS2 systems demonstrate superior visible absorption properties and a favorable band gap, indicating their potential as photo-catalysts for water splitting.

In Situ Growth of Nano-MoS2 on Graphite Substrates as Catalysts for Hydrogen Evolution Reaction

In order to synthesize a high-efficiency catalytic electrode for hydrogen evolution reactions, nano-MoS₂ was deposited in situ on the surface of graphite substrates via a one-step hydrothermal method. The effects of the reactant concentration on the microstructure and the electrocatalytic characteristics of the nano-MoS₂ catalyst layers were investigated in detail. The study results showed that nano-MoS₂ sheets with a thickness of about 10 nm were successfully deposited on the surface of the graphite substrates. The reactant concentration had an important effect on uniform distribution of the catalyst layers. A higher or lower reactant concentration was disadvantageous for the electrochemical performance of the nano-MoS₂ catalyst layers. The prepared electrode had the best electrocatalytic activity when the thiourea concentration was 0.10 mol·L^-1. The minimum hydrogen evolution reaction overpotential was 196 mV (j = 10 mV·cm^-2) and the corresponding Tafel slope was calculated to be 54.1 mV·dec^-1. Moreover, the prepared electrode had an excellent cycling stability, and the microstructure and the electrocatalytic properties of the electrode had almost no change after 2000 cycles. The results of the present study are helpful for developing low-cost and efficient electrode material for hydrogen evolution reactions.

Recent Advances in Molybdenum Disulfide and Its Nanocomposites for Energy Applications: Challenges and Development

Energy storage and conversion are critical components of modern energy systems, enabling the integration of renewable energy sources and the optimization of energy use. These technologies play a key role in reducing greenhouse gas emissions and promoting sustainable development. Supercapacitors play a vital role in the development of energy storage systems due to their high power density, long life cycles, high stability, low manufacturing cost, fast charging-discharging capability and eco-friendly. Molybdenum disulfide (MoS₂) has emerged as a promising material for supercapacitor electrodes due to its high surface area, excellent electrical conductivity, and good stability. Its unique layered structure also allows for efficient ion transport and storage, making it a potential candidate for high-performance energy storage devices. Additionally, research efforts have focused on improving synthesis methods and developing novel device architectures to enhance the performance of MoS₂-based devices. This review article on MoS₂ and MoS₂-based nanocomposites provides a comprehensive overview of the recent advancements in the synthesis, properties, and applications of MoS₂ and its nanocomposites in the field of supercapacitors. This article also highlights the challenges and future directions in this rapidly growing field.

AI for Nanomaterials Development in Clean Energy and Carbon Capture, Utilization and Storage (CCUS)

Zero-carbon energy and negative emission technologies are crucial for achieving a carbon neutral future, and nanomaterials have played critical roles in advancing such technologies. More recently, due to the explosive growth in data, the adoption and exploitation of artificial intelligence (AI) as part of the materials research framework have had a tremendous impact on the development of nanomaterials. AI has enabled revolutionary next-generation paradigms to significantly accelerate all stages of material discovery and facilitate the exploration of the enormous design space. In this review, we summarize recent advancements of AI applications in nanomaterials discovery, with a special emphasis on the selected applications of AI and nanotechnology for the net-zero emission future including the development of solar cells, hydrogen energy, battery materials for renewable energy, and CO₂ capture and conversion materials for carbon capture, utilization and storage (CCUS) technologies. In addition, we discuss the limitations and challenges of current AI applications in this area by identifying the gaps that exist in current development. Finally, we present the prospect for future research directions in order to facilitate the large-scale applications of artificial intelligence for advancements in nanomaterials.

Electrocatalytic Porphyrin/Phthalocyanine-Based Organic Frameworks: Building Blocks, Coordination Microenvironments, Structure-Performance Relationships

Metal-porphyrins or metal-phthalocyanines-based organic frameworks (POFs), an emerging family of metal-N-C materials, have attracted widespread interest for application in electrocatalysis due to their unique metal-N4 coordination structure, high conjugated π-electron system, tunable components, and chemical stability. The key challenges of POFs as high-performance electrocatalysts are the need for rational design for porphyrins/phthalocyanines building blocks and an in-depth understanding of structure-activity relationships. Herein, the synthesis methods, the catalytic activity modulation principles, and the electrocatalytic behaviors of 2D/3D POFs are summarized. Notably, detailed pathways are given for modulating the intrinsic activity of the M-N4 site by the microenvironments, including central metal ions, substituent groups, and heteroatom dopants. Meanwhile, the topology tuning and hybrid system, which affect the conjugation network or conductivity of POFs, are also considered. Furthermore, the representative electrocatalytic applications of structured POFs in efficient and environmental-friendly energy conversion areas, such as carbon dioxide reduction reaction, oxygen reduction reaction, and water splitting are briefly discussed. Overall, this comprehensive review focusing on the frontier will provide multidisciplinary and multi-perspective guidance for the subsequent experimental and theoretical progress of POFs and reveal their key challenges and application prospects in future electrocatalytic energy conversion systems.

Strategies to improve electrocatalytic performance of MoS2-based catalysts for hydrogen evolution reactions

Electrocatalytic hydrogen evolution reactions (HERs) are a key process for hydrogen production for clean energy applications. HERs have unique advantages in terms of energy efficiency and product separation compared to other methods. Molybdenum disulfide (MoS₂) has attracted extensive attention as a potential HER catalyst because of its high electrocatalytic activity. However, the HER performance of MoS₂ needs to be improved to make it competitive with conventional Pt-based catalysts. Herein, we summarize three typical strategies for promoting the HER performance, i.e., defect engineering, heterostructure formation, and heteroatom doping. We also summarize the computational density functional theory (DFT) methods used to obtain insight that can guide the construction of MoS₂-based materials. Additionally, the challenges and prospects of MoS₂-based catalysts for the HER have also been discussed.

In this review, we summarize three general classes of effective strategies to enhance the HER activity of MoS₂ and DFT calculation methods, i.e. defect engineering, heterostructure formation, and heteroatom doping.

Single s-block and p-block metal sites for photocatalytic degradation of organic pollutants and hydrogen evolution

Photocatalytic degradation of organic pollutants combined with hydrogen evolution is an effective way to solve the energy crisis and environmental problems. In this work, single s-block (IA group and IIA...

In Situ Construction of Co-MoS2/Pd Nanosheets on Polypyrrole-Derived Nitrogen-Doped Carbon Microtubes as Multifunctional Catalysts with Enhanced Catalytic Performance

The structural design of multiple functional components could integrate synergistic effects to enhance the catalytic performance of MoS₂-based composites for catalytic applications. Herein, one-dimensional (1D) Co-MoS₂/Pd@NCMTs composites were designed to prepare Co-doped MoS₂/Pd nanosheets (NSs) on N-doped carbon microtubes (NCMTs) from tubular polypyrrole (PPy) as multifunctional catalysts. The Co-MoS₂/Pd@NCMTs composites integrated the synergistic effects of Co-doping, a 1D tubular structure, and noble-metal Pd decoration. Thus, a higher catalytic activity was observed in 4-nitrophenol (4-NP) reduction and peroxidase-like catalysis than other components, such as MoS₂, MoS₂@NCMTs, and Co-MoS₂@NCMTs. Remarkably, the results indicated that the dissolution, diffusion, and redistribution led to the dissolution of MoO₃@ZIF-67 cores and generation of Co-doped MoS₂ NSs. Benefiting from the synergistic effect from these components, Co-MoS₂/Pd@NCMTs were considered as a facile colorimetric sensing platform for detecting tannic acid. Moreover, outstanding performance was realized in the reduction of 4-NP with the composites. Thus, we provide a simple synthetic strategy for simultaneously integrating electronic engineering and structural advantages to develop an efficient MoS₂-based multifunctional catalyst.

g-C3N4/ZnCdS heterojunction for efficient visible light-driven photocatalytic hydrogen production

To suppress the aggregation behavior caused by the high surface energy of quantum dots (QDs), ZnCdS QDs were grown in situ on a g-C₃N₄ support. During the growth process, the QDs tightly adhered to the support surface. The ZnCdS QDs were prepared by low-temperature sulfurization and cation exchange with a zeolitic imidazolate framework precursor under mild conditions. The heterojunction of g-C₃N₄/ZnCdS-2 (CN/ZCS-2, with a g-C₃N₄ to ZIF-8 ratio of 2.0) not only showed excellent optical absorption performance, abundant reactive sites, and a close contact interface but also effectively separated the photogenerated electrons and holes, which greatly improved its photocatalytic hydrogen production performance. Under visible light irradiation (wavelength > 420 nm) without a noble metal cocatalyst, the hydrogen evolution rate of the CN/ZCS-2 heterojunction reached 1467.23 μmol g⁻¹ h⁻¹, and the durability and chemical stability were extraordinarily high.

The zeolitic imidazolate framework-8 (ZIF-8) is used as a precursor to prepare ZnCdS/C₃N₄ heterojunctions to achieve visible light-driven water splitting hydrogen production effectively.

Turbulence enhanced ferroelectric-nanocrystal-based photocatalysis in urchin-like TiO2/BaTiO3 microspheres for hydrogen evolution

The application of a built-in electric field due to piezoelectric potential is one of the most efficient approaches for photo-induced charge transport and separation. However, the efficiency of converting mechanical energy to chemical energy is still very low, and the enhancement of photocatalysis, thus, is limited. To overcome this problem, here, we propose sonophotocatalysis based on a new hybrid photocatalyst, which combines ferroelectric nanocrystals (BaTiO₃) and dendritic TiO₂ to form an urchin-like TiO₂/BaTiO₃ hybrid photocatalyst. Under periodic ultrasonic excitation, a spontaneous polarization potential of BaTiO₃ nanocrystals in response to ultrasonic waves can act as an alternating built-in electric field to separate photoinduced carriers incessantly, which can significantly enhance the photocatalytic activity and cyclic performance of the urchin-like TiO₂/BaTiO₃ catalyst. More importantly, the significant enhancement of photocatalytic hydrogen evolution is due to the coupling effect of two types of piezoelectric potential in the presence of BaTiO₃ nanocubes as well as the semiconductor and optical properties of TiO₂ nanowires of the urchin-like TiO₂/BaTiO₃ hybrid structure under simulated sunlight and periodic ultrasonic irradiation, which can significantly improve the efficiency of converting mechanical energy to chemical energy.

MoS2-2xSe2x Nanosheets Grown on Hollow Carbon Spheres for Enhanced Electrochemical Activity

Electrochemical catalysts with high conductivity and low reaction potential are respected. In this paper, hollow carbon spheres (HCSs) were homogeneously coated with Se-doped MoS₂ (MoS_2-2xSe_2x) nanosheets by hydrothermal synthesis. The HCSs reduced the agglomeration of MoS_2-2xSe_2x nanosheets and improved their conductivity. Compared with the MoS₂-modified samples, Se doping increased the interlayer spacing which provided more active catalytic sites and improved the charge transfer. Thus, MoS_2-2xSe_2x-decorated samples revealed enhanced electrocatalytic activity. The composition of MoS_2-2xSe_2x nanosheets was adjusted by changing the ratios of sulfur and selenium precursors. In the case of a Se/S molar ratio of 0.1, the composite of HCS decorated with MoS_2-2xSe_2x nanosheets (C@MoS_2-2xSe_2x) revealed the lowest overpotential and the smallest Tafel slope.

Oxygen Evolution and Reduction Reaction Activity Investigations on Fe, Co or Ni embedded Tetragonal Graphene by A Thermodynamical Full-Landscape Searching Scheme

Single transition metal (TM) atoms such as Fe, Co and Ni occupying a carbon divacancy in tetragonal graphene (TG) and bonded with four nitrogen atoms (TM@N4 TG) as electrocatalysts are investigated by means of first-principles calculations. To consider the effect of solvent species on the local configuration of the active single metal, a thermodynamical full-landscape searching (TFLS) scheme is employed. The calculated thermodynamic overpotentials (ηtd ) from our TFLS indicate that Co@N4 TG displays high catalytic activity toward both oxygen evolution reaction (OER) and reduction reaction (ORR), with ηtd OER and ηtd ORR as 0.397 and 0.357 V, respectively. Its OER potential cannot be captured if only one four electron reaction loop (FERL) is considered. The actual active pathways do not always turn out to be the reactions starting from the bare site. Our findings demonstrate that TG is a promising support and TM confined TD can be used to design effective and cheap multifunctional electrocatalysts.

FeCoP2 Nanoparticles Embedded in N and P Co-doped Hierarchically Porous Carbon for Efficient Electrocatalytic Water Splitting

The design and synthesis of low-cost and efficient bifunctional electrocatalysts for water splitting are critical and challenging. Hereby, a bimetallic phosphide embedded in a N and P co-doped porous carbon (FeCoP₂@NPPC) material was synthesized by using sustainable biomass-derived N- and P-containing carbohydrates and non-noble metal salts as precursors. The obtained material exhibits good catalytic activities in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. The bimetallic alloy phosphide (FeCoP₂) is the active site for electrocatalysis. Theoretical calculation indicates that the sub-layer Fe atoms and top-layer Co atoms in FeCoP₂ exhibit a synergistic effect for enhanced electrocatalytic performance. The carbon matrix around the FeCoP₂ can prevent the corrosion during the catalytic reactions. The hierarchically porous structure of the FeCoP₂@NPPC material can promote the transfer of electrons and electrolyte, and increase the contact area of the active sites and electrolytes. N- and P-containing functionalities improve the wetting and conductivity properties of the porous carbon. Due to the synergistic effects, FeCoP₂@NPPC requires a low overpotential of 114 and 150 mV at the current density of 10 mA cm^-2 for HER in 0.5 M H₂SO₄ and 1.0 M KOH, and an overpotential of 236 mV for OER in 1.0 M KOH solution, which are much lower than those of FeP@NPPC and CoP@NPPC. Based on the density functional theory calculation, FeCoP₂ yields the smallest Gibbs free energy change of rate-determining step among the samples, which leads to better electrochemical performances. In addition, when FeCoP₂@NPPC was used as a bifunctional catalyst in water splitting, the electrolyzer needed a low voltage of 1.60 V to deliver the current density of 10 mA cm^-2. Furthermore, this work provides a strategy for preparing sustainable, stable, and highly active electrocatalysts for water splitting.

Electrochemical oxidation of boron-doped nickel-iron layered double hydroxide for facile charge transfer in oxygen evolution electrocatalysts

The oxygen evolution reaction (OER) is the key reaction in water splitting systems, but compared with the hydrogen evolution reaction (HER), the OER exhibits slow reaction kinetics. In this work, boron doping into nickel-iron layered double hydroxide (NiFe LDH) was evaluated for the enhancement of OER electrocatalytic activity. To fabricate boron-doped NiFe LDH (B:NiFe LDH), gaseous boronization, a gas-solid reaction between boron gas and NiFe LDH, was conducted at a relatively low temperature. Subsequently, catalyst activation was performed through electrochemical oxidation for maximization of boron doping and improved OER performance. As a result, it was possible to obtain a remarkably reduced overpotential of 229 mV at 10 mA cm-2 compared to that of pristine NiFe LDH (315 mV) due to the effect of facile charge-transfer resistance by boron doping and improved active sites by electrochemical oxidation.

Modulation of the electronic properties and photocatalytic performance of black phase monolayer GeSe by noble metal doping

Possible doping positions of noble metal atoms on the surface of monolayer GeSe.

A binuclear Co-based metal-organic framework towards efficient oxygen evolution reaction

The search for low-cost and high-performance electrocatalysts for oxygen evolution reaction (OER) has aroused enormous research interest in the last few years. Reported herein is the topotactic construction of a binuclear Co-based metal-organic framework (Co2-tzpa) using a solvothermal reaction. Prominently, as a porous catalyst, Co2-tzpa holds its activity for at least 25 hours and exhibits low OER overpotentials of 336 and 396 mV to achieve the current density of 10 mA cm-2 in 1 M KOH and 0.1 M KOH, respectively. The excellent OER performance should be attributed to each cobalt site coordinated with two tetrazolate N atoms.

Promotion of the water oxidation activity of iridium oxide by a nitrogen coordination strategy

The water oxidation reaction is the pivotal half-reaction for photo-/electro-catalytic water splitting. Fabrication of high-efficiency and robust water oxidation is essential to realize wide-scale artificial photosynthesis. Here, we report an efficient strategy to improve the water oxidation activity of iridium oxide by a nitrogen-coordination method. Due to the coordination effect, the iridium oxide can be well dispersed to generate ultra-small nanoparticles and the intrinsic activity can be improved for the water oxidation reaction. This study suggests that high-performance water oxidation catalysts can be constructed based on a nitrogen-coordination strategy.