Enhanced photocatalytic H2 production performance of CdS hollow spheres using C and Pt as bi-cocatalysts

Coupling Cu Coordination Polymers with CdS Forming an S-Scheme Heterojunction for Rapid Charge Separation and High Photocatalytic Activity

Energy and the environment are significant impacting factors for the future development of humankind. In order to improve the corrosion resistance of CdS and decrease the recombination of photogenerated carriers, a novel Cu-CPs@CdS heterojunction with high efficiency mesopores was constructed by a simple hydrothermal method. The effective interfacial contact formation between nano-CdS and Cu-CPs promotes the transfer of photogenerated carriers while exhibiting a high spatial separation rate of charges. The photocatalytic performance of the heterojunction was evaluated by the photocatalytic degradation of organic pollutants and photocatalytic hydrogen generation. The photocatalytic degradation of ciprofloxacin (CIP) could reach 90.34%, and the hydrogen generation was high as 9227.82 μmol·g-1 under simulated sunlight irradiation. The boosted photocatalytic activity of Cu-CPs@CdS results from (i) the formation of coordination bonds, which not only enhanced the stability of heterojunctions but also provided a path for photogenerated carrier migration, (ii) integrating Cu-CPs, which provided more active sites, and (iii) the matched energy band structure between CdS and Cu-CPs that promoted speedy S-scheme interfacial charge-transfer pathways, culminating in efficient photogenerated charge separation and transfer. This research offered a fresh tactic to restrict photocorrosion and enhance the production of photocatalytic H2 over CdS-based catalysts.

Covalent Bonding of Salen Metal Complexes with Pyrene Chromophores to Porous Polymers for Photocatalytic Hydrogen Evolution

The development of low-cost and efficient photocatalysts to achieve water splitting to hydrogen (H2) is highly desirable but remains challenging. Herein, we design and synthesize two porous polymers (Co-Salen-P and Fe-Salen-P) by covalent bonding of salen metal complexes and pyrene chromophores for photocatalytic H2 evolution. The catalytic results demonstrate that the two polymers exhibit excellent catalytic performance for H2 generation in the absence of additional noble-metal photosensitizers and cocatalysts. Particularly, the H2 generation rate of Co-Salen-P reaches as high as 542.5 μmol g-1 h-1, which is not only 6 times higher than that of Fe-Salen-P but also higher than a large amount of reported Pt-assisted photocatalytic systems. Systematic studies show that Co-Salen-P displays faster charge separation and transfer efficiencies, thereby accounting for the significantly improved photocatalytic activity. This study provides a facile and efficient way to fabricate high-performance photocatalysts for H2 production.

Construction of Au-modified CN-based donor-acceptor system coupled with dual photothermal effects for efficient photoreduction of carbon dioxide

Conversion of CO2 into high value-added fuels through the photothermal effect is an effective approach for utilizing solar energy. In this study, we prepared the CN-based photocatalyst Py-CTN-Au with both donor-acceptor (D-A) system and dual photothermal effects using a simple two-step method involving calcination and photo-deposition. Real-time monitoring with a thermal imaging camera revealed that Py-CTN-Au0.5 achieved a maximum stable temperature of 180 °C, which was approximately 1.2 times higher than that of Py-CTN (155 °C) and 1.9 times higher than that of g-CN (95 °C) under the same reaction conditions. Under the optimized reaction conditions, Py-CTN-Au0.5 exhibited a CO release rate of 30.59 umol g-1 after 4 h of reaction, which was 7.3 times higher than that of pure g-CN (4.18 umol g-1). The D-A system not only facilitated the separation and transformation of charge carriers but also induced a photothermal effect to accelerate the photoreduction of CO2. Additionally, the cocatalyst Au nanoparticles (Au NPs) further enhanced the charge carrier dynamics and photothermal effect by increasing the built-in electric field intensity and localized surface plasmon resonance (LSPR) effect, respectively. The dual photothermal effects resulting from the non-radiative photon conversion of the D-A structure and the Au NPs LSPR effect, along with the enhanced charge carrier dynamics, catalyzed the efficient photoreduction of CO2. DFT simulations were used to confirm the effect of D-A system and Au NPs. In-situ FTIR results demonstrated that the synergistic photothermal effect promoted the formation of the key intermediate species COOH*, which is beneficial for the photocatalytic reduction of CO2. This study provides valuable insights into the multiple photothermal synergistic effects in photocatalytic reactions.

Construction of a Dual-Function Mo-ZIS@Ti for Photocatalytic Benzyl Alcohol Oxidation and Hydrogen Evolution Performance

The photocatalytic oxidation of benzyl alcohol and the simultaneous evolution of hydrogen from water are efficient dual-optimal routes. It is important to develop composite catalysts that combine redox properties and facilitate electron-hole separation and transport. Herein, the bimetallic-doped Mo-ZIS@Ti photocatalyst was designed and synthesized, and the selective oxidation of benzyl alcohol and hydrogen evolution by water splitting was realized at the same time. Under visible light irradiation, benzyl alcohol was completely converted with more than 99% selectivity for benzaldehyde, and the H2 production rate was 5.6 times higher than the initial ZIS. The exceptional catalytic performance was ascribed to utilizing Ti-MIL-125 as a precursor, wherein slowly releasing-doped Ti formed robust Ti-S bonds that quickly transfer electrons and reduce sites. Meanwhile, doping Mo effectively captures photogenerated holes and acts as active sites for oxidation reactions. Both experimental characterization and work function calculations demonstrate that the bimetallic synergism effectively modulates the electronic structure of ZIS, promotes the directional separation of electrons and holes, and significantly improves the photoactivity and stability of ZIS. This work contributes a route to obtain benzaldehyde and green hydrogen at the same time and also gives new insights for the construction and mechanism study of bimetallic-doping catalysts.

Synthesis of Dual p-n Heterojunction of Ni/Mn-MOF-74/CdS@Co3O4 Photocatalyst as a Photoassisted Fenton-like Catalyst for Removal of Tetracycline Hydrochloride

In this study, a novel composite material, Ni/Mn-MOF-74/CdS@Co3O4 was synthesized. This material consisted of a dual p-n heterojunction, which enabled efficient separation and transfer of charge carriers. Compared to a single p-n heterojunction, the presence of this dual heterojunction significantly enhanced the overall efficiency. The improved efficiency could be attributed to the unique properties of the constituent semiconductors. Co3O4 exhibited p-type semiconductor properties, while Ni/Mn-MOF-74 and CdS exhibited n-type semiconductor properties. By a combination of these materials to form a composite photocatalyst, a Z-type heterojunction was created at the interface of the p-n junction. This design established an internal electric field at both ends, effectively separating the photogenerated electrons and holes in each individual photocatalyst. As a result, the respective photocatalytic activities of the materials were maximized. To demonstrate the practical application of this composite material, it was utilized for the activation of peroxymonosulfate under visible light irradiation, with the aim of enhancing the photocatalytic degradation efficiency of tetracycline hydrochloride. The photocatalytic mechanism of Ni/Mn-MOF-74/CdS@Co3O4 in activating peroxymonosulfate and degrading tetracycline hydrochloride was investigated in detail. Furthermore, the toxicity of tetracycline hydrochloride and its intermediates was evaluated by using toxicity evaluation software.

Comprehensive Review on g-C3N4-Based Photocatalysts for the Photocatalytic Hydrogen Production under Visible Light

Currently, the synthesis of active photocatalysts for the evolution of hydrogen, including photocatalysts based on graphite-like carbon nitride, is an acute issue. In this review, a comprehensive analysis of the state-of-the-art studies of graphic carbon nitride as a photocatalyst for hydrogen production under visible light is presented. In this review, various approaches to the synthesis of photocatalysts based on g-C₃N₄ reported in the literature were considered, including various methods for modifying and improving the structural and photocatalytic properties of this material. A thorough analysis of the literature has shown that the most commonly used methods for improving g-C₃N₄ properties are alterations of textural characteristics by introducing templates, pore formers or pre-treatment method, doping with heteroatoms, modification with metals, and the creation of composite photocatalysts. Next, the authors considered their own detailed study on the synthesis of graphitic carbon nitride with different pre-treatments and respective photocatalysts that demonstrate high efficiency and stability in photocatalytic production of hydrogen. Particular attention was paid to describing the effect of the state of the platinum cocatalyst on the activity of the resulting photocatalyst. The decisive factors leading to the creation of active materials were discussed.

Surface-active site modulation of the S-scheme heterojunction toward exceptional photocatalytic performance

Heterojunction photocatalysts have shown their immense capability in enhancing photogenerated charge carrier separation. Yet, the intrinsic scarcity of active sites in semiconductor components of heterojunction photocatalysts limits their potential for photocatalysis being used in practical applications. Herein, we employ a non-noble metal cocatalyst (i.e., NiS) for modulating a S-scheme heterojunction photocatalyst consisting of Cd₃(C₃N₃S₃)₂ (CdCNS) and CdS. It is revealed that the formation of the CdCNS/CdS S-scheme heterojunction can enable optimal photogenerated charge carrier utilization efficiency and optimized redox capability. More importantly, the meticulous loading of NiS can play multiple roles in enhancing the photocatalytic performance of the CdCNS/CdS photocatalyst, including endowing it with abundant surface-active sites and acting as a photogenerated electron acceptor. As a result, the optimized NiS-loaded CdCNS/CdS attains an excellent hydrogen production rate of 38.17 mmol g^-1 h^-1, to reach a quantum efficiency of 29.02% at 420 nm. The results reported in this work provide an interesting insight into the important roles of surface-active site modulation in optimizing photocatalytic performances.

Fabrication of TaON/CdS Heterostructures for Enhanced Photocatalytic Hydrogen Evolution under Visible Light Irradiation

Developing high-performance photocatalysts for H2 production via fabricating heterojunctions has attracted much attention. Herein, we design a simple strategy to prepare composites that consist of TaON/CdS hybrids via a hydrothermal process. The results show that the pristine CdS nanoparticles loaded with 20 wt% TaON (TC4) could maximize the photocatalytic hydrogen evolution rate to 19.29 mmol g−1 h−1 under visible light irradiation, which was 2.13 times higher than that of the pristine CdS (9.03 mmol g−1 h−1) under the same conditions. The apparent quantum yield (AQY) of the TC4 nanocomposites at 420 nm was calculated to be 18.23%. The outstanding photocatalytic performance of the composites can be ascribed to the formation of heterojunctions. The electrochemical measurements indicate that the decoration facilitates the generation of extra photo-electrons, prolonging the recombination rate of photogenerated charge carriers, offering adequate active sites and improving catalytic stability. This study sheds light on the construction strategy and the deep understanding of the novel CdS-based composites for high-performance photocatalytic H2 production.

Self-Assembled Zeolitic Imidazolate Framework/CdS Hollow Microspheres with Efficient Charge Separation for Enhanced Photocatalytic Hydrogen Evolution

Enhanced interfacial charge separation is of great importance to high-efficiency photocatalytic hydrogen production. Herein, we successfully fabricated novel ZIF-67/CdS hollow sphere (HS) and ZIF-8/CdS HS heterostructures through an in situ self-assembly process, in which ZIF-67 and ZIF-8 are closely coated on CdS HSs to form "double-shell"-like structures. This hierarchical heterostructure with porous outer layers on the surface of CdS HSs can expose accessible active sites and possess close contact. Upon visible-light illumination, the optimal proportion of ZIF-67/CdS HS displays a hydrogen generation rate of 1721 μmol g^-1 h^-1, which is 11.9 and 3.1 times higher than that of a pure CdS HS (145 μmol g^-1 h^-1) and ZIF-8/CdS HS (555 μmol g^-1 h^-1), respectively. The proposed photocatalytic mechanism is explored: ZIF-8/CdS HS follows the type-II mechanism, and ZIF-67/CdS HS follows the Z-scheme mechanism. The reason for the higher photocatalytic activity of ZIF-67/CdS HS is that ZIF-67 not merely with a porous structure facilitates the diffusion of H₂ gas, but with a well-matched band structure promotes charge transfer and separation.

Biotemplated CdS Nano-Aggregate Networks for Highly Effective Visible-Light Photocatalytic Hydrogen Production

In the last few decades, many new synthesis techniques have been developed in order to obtain an effective visible-light responsive photocatalyst for hydrogen production by water splitting. Among these new approaches, the biotemplated synthesis method has aroused much attention because of its unique advantages in preparing materials with special morphology and structure. In this work, Hydrilla verticillata (L. f.) Royle was used as a biotemplate to synthesize a CdS photocatalyst. The as-synthesized sample had the microstructure of nano-scaled aggregate networks and its activity for photocatalytic hydrogen production was six times higher than that of CdS synthesized without a template in an Na₂S-Na₂SO₃ sacrificial system. The use of Pt and PdS as cocatalysts further improved the hydrogen production rate to 14.86 mmol/g·h under visible-light (λ ≥ 420 nm) irradiation, so the hydrogen production can be directly observed by the naked eye. The results of characterization showed that the as-synthesized CdS photocatalyst has a high specific surface area and narrow band gap, which is favorable for light absorption and photocatalytic reaction. This work provides a new way to search for efficient visible-light catalysts and confirms the uniqueness of a biotemplated synthesis method in obtaining specially structured materials.

Optimizing Atomic Hydrogen Desorption of Sulfur-Rich NiS1+ x Cocatalyst for Boosting Photocatalytic H2 Evolution

Low-cost transition-metal chalcogenides (MS_x ) are demonstrated to be potential candidate cocatalyst for photocatalytic H₂ generation. However, their H₂ -generation performance is limited by insufficient quantities of exposed sulfur (S) sites and their strong bonding with adsorbed hydrogen atoms (SH_ads ). To address these issues, an efficient coupling strategy of active-site-enriched regulation and electronic structure modification of active S sites is developed by rational design of core-shell Au@NiS_{1+ x} nanostructured cocatalyst. In this case, the Au@NiS_{1+ x} cocatalyst can be skillfully fabricated to synthesize the Au@NiS_{1+ x} modified TiO₂ (denoted as TiO₂ /Au@NiS_{1+ x} ) by a two-step route. Photocatalytic experiments exhibit that the resulting TiO₂ /Au@NiS_{1+ x} (1.7:1.3) displays a boosted H₂ -generation rate of 9616 µmol h^-1 g^-1 with an apparent quantum efficiency of 46.0%  at 365 nm, which is 2.9 and 1.7 times the rate over TiO₂ /NiS_{1+ x} and TiO₂ /Au, respectively. In situ/ex situ XPS characterization and density functional theory calculations reveal that the free-electrons of Au can transfer to sulfur-enriched NiS_{1+ x} to induce the generation of electron-enriched S^{δ -} active centers, which boosts the desorption of H_ads for rapid hydrogen formation via weakening the strong SH_ads bonds. Hence, an electron-enriched S^{δ -} -mediated mechanism is proposed. This work delivers a universal strategy for simultaneously increasing the active site number and optimizing the binding strength between the active sites and hydrogen adsorbates.

A signal-off photoelectrochemical aptasensor for ultrasensitive 17β-estradiol detection based on rose-like CdS@C nanostructure and enzymatic amplification

Carbon-coated cadmium sulfide rose-like nanostructures (CdS@C NRs) were prepared via a facile solvothermal approach and used as the photoelectrochemical (PEC) sensing platform for the integration of functional biomolecules. Based on this, a novel "signal-off" PEC aptasensor mediated by enzymatic amplification was proposed for the sensitive and selective detection of 17β-estradiol (E2). In the presence of E2, alkaline phosphatase-modified aptamer (ALP-apta) were released from the electrode surface through the specific recognition with E2, which caused the negative effect on PEC response due to the decrease of ascorbic acid (AA) produced by the ALP in situ enzymatic catalysis. The developed PEC aptasensor for detection of E2 exhibited a wide linear range of 1.0-250 nM, with the low detection limit of 0.37 nM. This work provides novel insight into the design of potential phoelectroactive materials and the application of signal amplification strategy in environmental analysis field.

Unique Cd0.5Zn0.5S/WO3-x direct Z-scheme heterojunction with S, O vacancies and twinning superlattices for efficient photocatalytic water-splitting

Photocatalytic water-splitting employing the Z-scheme semiconductor systems mimicking natural photosynthesis is regarded as a promising way to achieve efficient soalr-to-H₂ conversion. Nevertheless, it still remains a big challenge to design high-performance direct Z-scheme photocatalysts without the use of noble metals as electron mediators. Herein, a unique Cd_0.5Zn_0.5S/WO_3-x direct Z-scheme heterojunction was constructed for the first time, which consisted of smaller O-vacancy-decorated WO_3-x nanocrystals anchoring on Cd_0.5Zn_0.5S nanocrystals with S vacancies and zinc blende/wurtzite (ZB/WZ) twinning superlattices. Under visible-light (λ > 420 nm) irradiation, the Cd_0.5Zn_0.5S/WO_3-x composites exhibited an outstanding H₂ evolution reaction (HER) activity of 20.50 mmol h^-1 g^-1 (corresponding to the apparent quantum efficiency of 18.0% at 420 nm), which is much superior to that of WO_3-x, Cd_0.5Zn_0.5S, and Cd_0.5Zn_0.5S loaded with Pt. Interestingly, the introduced O and S vacancies contributed to improving the HER activity of Cd_0.5Zn_0.5S/WO_3-x significantly. Moreover, the cycling and long-term HER measurements confirmed the robust photocatalytic stability of Cd_0.5Zn_0.5S/WO_3-x for H₂ production. The excellent light harvesting and efficient spatial charge separation induced by the ZB/WZ twinning homojunctions and defect-promoted direct Z-scheme charge-transfer pathway are responsible for the exceptional HER capability. Our study could enlighten the rational engineering and optimization of semiconductor nanostructures for energy and environmental applications.

Photocatalytic H2 Evolution Coupled with Furfuralcohol Oxidation over Pt-Modified ZnCdS Solid Solution

Coupling photocatalytic H₂ production with organic synthesis attracts immense interest in the energy and chemical engineering field for the low-cost, clean, and sustainable generation of green energy and value-added products. Nevertheless, the performance of current photocatalysts is greatly limited by grievous charge recombination and tardy H₂ evolution. To tackle these issues, a Pt nanocluster-modified ZnCdS solid solution is fabricated for photocatalytic H₂ production and selective furfuralcohol oxidation. The internal electric field inside the ZnCdS and Schottky junction between ZnCdS and Pt nanoclusters drastically ameliorate charge separation. Meanwhile, the Pt nanoclusters remarkably expedite the H₂ evolution kinetics on ZnCdS. As a result, the H₂ production rate over Pt-loaded ZnCdS reaches 1045 µmol g^-1 h^-1 , which is about 26- and 70-fold that of CdS and ZnS, respectively. Under light irradiation for 3 h, the conversion of furfuralcohol to furfural reaches 71% with 89% furfural selectivity. The photocatalytic mechanism is investigated by in situ characterizations and theoretical calculations.

Synthesis of Ni modified Au@CdS core-shell nanostructures for enhancing photocatalytic coproduction of hydrogen and benzaldehyde under visible light

The development of visible light responsive photocatalysts for simultaneous production of hydrogen (H₂) fuel and value-added chemicals is greatly promising to solve the energy and environmental issues by improving the utilization efficiency of solar energy. Herein, the three-component Ni/(Au@CdS) core-shell nanostructures were constructed by the hydrothermal synthesis followed with photodeposition. The intimate integration of plasmonic Au nanospheres and visible-light responsive CdS shells modified with Ni cocatalyst facilitated the generation and separation of electron-hole pairs as well as reduced the overpotential of hydrogen evolution. The Ni/(Au@CdS) photocatalyst exhibited excellent performance toward the selective transformation of benzyl alcohol under anaerobic conditions, and the yields of H₂ and benzaldehyde reached up to 3882 and 4242 μmol·g^-1·h^-1, respectively. The apparent quantum efficiency (AQE) was determined to be 4.09% under the irradiation of 420 nm. The systematic studies have verified the synergy of plasmonic effect and metal cocatalyst on enhancing the photocatalysis. This work highlights the desirable design and potential application of plasmonic photocatalysts for solar-driven coproduction of H₂ fuel and high-value chemicals.

Co(OH)2 water oxidation cocatalyst-decorated CdS nanowires for enhanced photocatalytic CO2 reduction performance

Photocatalytic CO2 reduction is a promising technology to resolve the greenhouse effect and energy crisis. In this work, a Co(OH)2 nanoparticle decorated CdS nanowire (Co(OH)2/CdS) based heterostructured photocatalyst was prepared via a solvothermal and subsequent co-precipitation method, and it was used for photocatalytic CO2 reduction. The optimal Co(OH)2/CdS photocatalyst achieves a CO production rate of 8.11 μmol g-1 h-1 under visible light irradiation (λ > 420 nm), which is about 2 times higher than that of bare CdS. The experimental results show that a Co(OH)2 cocatalyst possesses a great capability of consuming holes, which promotes the oxygen-producing half-reaction and accelerates charge separation, thus enhancing the CO2 photoreduction performance of CdS. Notably, without using complex synthesis processes, hazardous substances or expensive ingredients, Co(OH)2/CdS shows high light absorption, efficient charge separation and complete CO product selectivity. This work offers a new pathway for the construction of cost-effective photocatalytic materials to achieve highly efficient CO2 reduction activity by the integration of a Co(OH)2 cocatalyst.