Fabricating covalent organic framework/CdS S-scheme heterojunctions for improved solar hydrogen generation

D-A Conjugated Polymer/CdS S-Scheme Heterojunction with Enhanced Interfacial Charge Transfer for Efficient Photocatalytic Hydrogen Generation

Owing to the improved charge separation and maximized redox capability of the system, Step-scheme (S-scheme) heterojunctions have garnered significant research attention for efficient photocatalysis of H2 evolution. In this work, an innovative linear donor-acceptor (D-A) conjugated polymer fluorene-alt-(benzo-thiophene-dione) (PFBTD) is coupled with the CdS nanosheets, forming the organic-inorganic S-scheme heterojunction. The CdS/PFBTD (CP) composite exhibits an impressed hydrogen production rate of 7.62 mmol g-1 h-1 without any co-catalysts, which is ≈14 times higher than pristine CdS. It is revealed that the outstanding photocatalytic performance is attributed to the formation of rapid electron transfer channels through the interfacial Cd─O bonding as evidenced by the density functional theory (DFT) calculations and in situ X-ray photoelectron spectroscopy (XPS) analysis. The charge transfer mechanism involved in S-scheme heterojunctions is further investigated through the photo-irradiated Kelvin probe force microscopy (KPFM) analysis. This work provides a new point of view on the mechanism of interfacial charge transfer and points out the direction of designing superior organic-inorganic S-scheme heterojunction photocatalysts.

A triazine-based covalent organic framework decorated with cadmium sulfide for efficient photocatalytic hydrogen evolution from water

Construction of inorganic/organic heterostructures has been proven to be a very promising strategy to design highly efficient photocatalysts for solar driven hydrogen evolution from water. Herein, we report the preparation of a direct Z-scheme heterojunction photocatalyst by in situ growth of cadmium sulfide on a triazine-based covalent organic framework (COF). The triazine based-COF was synthesized by condensation reaction of precursors 1,3,5-tris-(4-formyl-phenyl) triazine (TFPT) and 2,5-bis-(3-hydroxypropoxy) terephthalohydrazide (DHTH), termed as TFPT-DHTH-COF. Widely distributed nitrogen atoms throughout TFPT-DHTH-COF skeletons serve as anchoring sites for strong interfacial interactions with CdS. The CdS/TFPT-DHTH-COF composite showed a hydrogen evolution rate of 15.75 mmol h-1 g-1, which is about 75 times higher than that of TFPT-DHTH-COF (0.21 mmol h-1 g-1) and 3.4 times higher than that of CdS (4.57 mmol h-1 g-1). With the properly staggered band alignment and strong interfacial interaction between TFPT-DHTH-COF and CdS, a Z-scheme charge transfer pathway is achieved. The mechanism has been systematically analyzed by steady state and time-resolved photoluminescence measurements as well as in situ irradiated X-ray photoelectron spectroscopy.

Covalent Organic Framework Nanoarchitectonics: Recent Advances for Precious Metal Recovery

The recovery of precious metals (PMs) from secondary resources has garnered significant attention due to environmental and economic considerations. Covalent organic frameworks (COFs) have emerged as promising adsorbents for this purpose, owing to their tunable pore size, facile functionalization, exceptional chemical stability, and large specific surface area. This review provides an overview of the latest research progress in utilizing COFs to recover PMs. Firstly, the design and synthesis strategies of chemically stable COF-based materials, including pristine COFs, functionalized COFs, and COF-based composites, are delineated. Furthermore, the application of COFs in the recovery of gold, silver, and platinum group elements is delved into, emphasizing their high adsorption capacity and selectivity as well as recycling ability. Additionally, various interaction mechanisms between COFs and PM ions are analyzed. Finally, the current challenges faced by COFs in the field of PM recovery are discussed, and potential directions for future development are proposed, including enhancing the recyclability and reusability of COF materials and realizing the high recovery of PMs from actual acidic wastewater. With the targeted development of COF-based materials, the recovery of PMs can be realized more economically and efficiently in the future.

g-C3N4-Based Photocatalytic Materials for Converting CO2 Into Energy: A Review

Environmental pollution management and renewable energy development are humanity's biggest issues in the 21st century. The rise in atmospheric CO2, which has surpassed 400 parts per million, has stimulated research on CO2 reduction and conversion methods. Presently, photocatalytic conversion of CO2 to valuable hydrocarbons enables the transformation of solar energy into chemical energy and offers a novel avenue for energy conversion while regulating the greenhouse effect. This is an ideal strategy for simultaneously addressing environmental issues and the energy crisis. Photocatalysts are essential to photocatalytic processes. Photocatalyst is the core of photocatalytic technology, and graphite carbon nitride (g-C3N4) has attracted much attention because of its nonmetallic characteristics, and it has the characteristics of low cost, tunable electronic structure, easy manufacture and strong reducibility. However, its activity is not only affected by external reaction conditions, but also by the band gap structure, physical and chemical stability, surface morphology and specific surface area of the photocatalyst it. In this paper, the application progress of g-C3N4-based photocatalytic materials in CO2 reduction is reviewed, and the modification strategies of g-C3N4-based catalysts to obtain better catalytic efficiency and selectivity in CO2 photocatalytic reduction are summarized, and the future development of this material is prospected.

Dynamics of Electron Transfer in CdS Photocatalysts Decorated with Various Noble Metals

To address charge recombination in photocatalysis, the prevalent approach involves the use of noble metal cocatalysts. However, the precise factors influencing this performance variability based on cocatalyst selection have remained elusive. In this study, CdS hollow spheres loaded with distinct noble metal nanoparticles (Pt, Au, and Ru) are investigated by femtosecond transient absorption (fs-TA) spectroscopy. A more pronounced internal electric field leads to the creation of a larger Schottky barrier, with the order Pt-CdS > Au-CdS > Ru-CdS. Owing to these varying Schottky barrier heights, the interface electron transfer rate (Ke) and efficiency (ηe) of metal-CdS in acetonitrile (ACN) exhibit the following trend: Ru-CdS > Au-CdS > Pt-CdS. However, the trends of Ke and ηe for metal-CdS in water are different (Ru-CdS > Pt-CdS > Au-CdS) due to the influence of water, leading to the consumption of photogenerated electrons and affecting the metal/CdS interface state. Although Ru-CdS displays the highest Ke and ηe, its overall photocatalytic performance, particularly in H2 production, lags behind that of Pt-CdS due to the electron backflow from Ru to CdS. This work offers a fresh perspective on the origin of performance differences and provides valuable insights for cocatalyst design and construction.

Sphere-rod-like Ag/AgCl@Fe2O3 Z-scheme heterojunction as photocatalysts for efficient degradation of tetracycline under visible light irradiation

Integration of multi-functional components into one is urgent for creating a viable platform to improve photocatalytic efficiency for environmental treatment. Here, MIL-88B-NH2 (Fe) was firstly employed to capture Ag+ cation for the formation of AgCl@MIL-88B-NH2 (Fe), and then turned into the strongly coupled Ag/AgCl@Fe2O3 with sphere-rod-like structure. As prepared Z-scheme Ag/AgCl@Fe2O3 heterojunction exhibited outstanding photocatalytic performance of tetracycline (TC) with a removal efficiency of 94.9% and a reaction kinetics of 0.0272 min-1, superior to single Ag/AgCl or Fe2O3, which attributed to the broad light absorption range and accelerated electron-hole pair separation stemmed from the synergistic effect between surface plasmon resonance effect (SPR) of metal Ag and AgCl/Fe2O3 heterojunction. Meanwhile, Ag/AgCl@Fe2O3 was found to be highly catalytic in the degradation of TC even after consecutive runs. Moreover, active species trapping experiments combined with ESR techniques revealed that superoxide radical, hydroxyl radical, electron, and hole all were involved in photodegradation of TC process. Importantly, the degradation intermediate products of TC were revealed in depth by LC-MS, and a possible degradation pathway was further proposed. This work opens up new insights into the integration of functional composites for the construction of advanced photocatalysts applied in environmental purification.

Surface-Controlled CdS/Ti3 C2 MXene Schottky Junction for Highly Selective and Active Photocatalytic Dehydrogenation-Reductive Amination

Photocatalytic valorization and selective transformation of biomass-derived platform compounds offer great opportunities for efficient utilization of renewable resources under mild conditions. Here, the novel three-dimensional hierarchical flower-like CdS/Ti3 C2 Schottky junction (MCdS) composed of surface-controlled CdS and pretreated Ti3 C2 MXene is created for photocatalytic dehydrogenation-reductive amination of biomass-derived amino acid production under ambient temperature with unprecedented activity and selectivity. Schottky junction efficiently promotes photoexcited charge migration and separation and inhibits photogenerated electron-hole recombination, which results in a super-high activity. Meanwhile, CdS with the reduced surface energy supplies sufficient hydrogen sources for imine reduction and induces the preferential orientation of alanine, thus contributing superior selectivity. Moreover, a wide range of hydroxyl acids are successfully converted into corresponding amino acids and even one-pot conversion of glucose to alanine is easily achieved over MCdS. This work illustrates the mechanism of crystal orientation control and heterojunction construction in controlling catalytic behavior of photocatalytic nanoreactor, providing a paradigm for construction of MXene-based heterostructure.

Controllable synthesis of hollow COFs for boosting photocatalytic hydrogen generation

COF-LZU1 with a cubic hollow structure was fabricated through a hard template approach by using water solvable NaCl as a template. The precisely prepared COF-LZU1 hollow cube displays an enhanced H2 evolution rate (651 μmol h-1 g-1), which is approximately 1.8 times greater than that of pristine COF-LZU1 (361 μmol h-1 g-1).

Metal-Free 2D/2D van der Waals Heterojunction Based on Covalent Organic Frameworks for Highly Efficient Solar Energy Catalysis

Covalent organic frameworks (COFs) have emerged as a kind of rising star materials in photocatalysis. However, their photocatalytic activities are restricted by the high photogenerated electron-hole pairs recombination rate. Herein, a novel metal-free 2D/2D van der Waals heterojunction, composed of a two-dimensional (2D) COF with ketoenamine linkage (TpPa-1-COF) and 2D defective hexagonal boron nitride (h-BN), is successfully constructed through in situ solvothermal method. Benefitting from the presence of VDW heterojunction, larger contact area and intimate electronic coupling can be formed between the interface of TpPa-1-COF and defective h-BN, which make contributions to promoting charge carriers separation. The introduced defects can also endow the h-BN with porous structure, thus providing more reactive sites. Moreover, the TpPa-1-COF will undergo a structural transformation after being integrated with defective h-BN, which can enlarge the gap between the conduction band position of the h-BN and TpPa-1-COF, and suppress electron backflow, corroborated by experimental and density functional theory calculations results. Accordingly, the resulting porous h-BN/TpPa-1-COF metal-free VDW heterojunction displays outstanding solar energy catalytic activity for water splitting without co-catalysts, and the H2 evolution rate can reach up to 3.15 mmol g-1 h-1, which is about 67 times greater than that of pristine TpPa-1-COF, also surpassing that of state-of-the-art metal-free-based photocatalysts reported to date. In particular, it is the first work for constructing COFs-based heterojunctions with the help of h-BN, which may provide new avenue for designing highly efficient metal-free-based photocatalysts for H2 evolution.

Covalent Organic Framework-Semiconductor-Based Heterostructures for Photocatalytic Applications

Photocatalysis is a promising and sustainable technology in the fields of energy conversion/storage and environment purification; however, the utilization of individual component as photocatalyst is generally restricted due to the low catalytic activity deriving from the rapid recombination of photogenerated electrons/holes. Covalent organic framework (COF)-semiconductor-based composite photocatalysts with synergistic effects provide a feasible route to achieve high-performance photocatalytic reactions with more active sites, strong light utilization ability, and high stability. In recent years, significant progress has been made in the rational design and preparation of the COF-semiconductors-based heterostructures for photocatalytic water splitting, carbon dioxide (CO₂ ) reduction, and dye/pollutant degradation. In this Review, the synthetic strategies of COF-semiconductor-based heterostructures are first introduced, which includes the rational design of the morphology, connection modes, and type of heterojunctions. The performance of COF-semiconductor-based heterostructures in different photocatalytic reactions are comprehensively reviewed. The structure-activity relationship and the synergistic effects within the heterostructures are discussed, and the photocatalytic mechanism and the role of COFs during the photocatalytic process are also presented. Finally, an outlook and challenges of realizing COF-semiconductor-based heterostructures with simple synthesis methods, diverse functions, high performance, and well-defined reaction mechanisms are provided.

Interface engineering of sandwich SiO@α-FeO@COF core-shell S-scheme heterojunctions for efficient photocatalytic oxidation of gas-phase HS

Hydrogen sulfide (H₂S) is considered to be a broad-spectrum toxicant, and it is crucial to address this problem due to its serious health and climate change impacts. Photocatalysis can be effectively applied for the reduction of H₂S molecules to S and other products. We synthesized sandwich-structured composite materials with internally immobilized SiO₂ nanospheres and externally wrapped COF layers co-modified with iron oxide nanoparticles. Furthermore, originally looked at the efficiency of photocatalysis in reducing hydrogen sulfide to sulfur. In this paper, a sandwich structure of core-shell composite photocatalysts based on SiO₂ was prepared by a multi-step method including Stöber and double ligand-regulated solvent heat, and these sandwich core-shell structures exhibited high hydrogen sulfide reduction and stability in applications. In addition, characterization, degradation studies, active substance trapping studies, and energy band structure analysis showed that S-type heterojunctions could effectively increase photo-generated carrier separation. This research advanced knowledge of photocatalytic hydrogen sulfide reduction and offered a novel approach for catalysts in COF sandwich core-shell structures.

Photoresponse of CVD grown crystalline quantum dot-embedded covalent organic framework thin film

Covalent organic frameworks (COFs) are a new family of novel 2D materials which are highly sought after for integration into future sensors and other devices for their highly porous structures and large surface areas. However, low-temperature large-area growth of these semiconductive materials with a clean surface for direct device applications is still a challenging task. To provide an on-chip photonic device, a COF366-Quantum dot (COF366-QDs) thin-film-based device fabricated by in situ chemical vapor deposition (CVD) is presented. The high-resolution transmission electron microscopy (HRTEM) displays the formation of the periodic, crystalline and porous framework of the COF layer with mono-dispersed QDs of average particle size of ∼2.5-3 nm. The fabricated COF366-QD layer acts as a photoactive layer in the photonic device with an Au-COFQD-Au structure where a conduction path is formed between the metal electrodes through a network of COF layer with embedded QDs. The device shows photoactive response under 514 nm visible light with a very low dark current of 4.36 × 10-11 A with a minimum light detection capability of 160 nW and a responsivity of ∼3.42 A W-1. The photonic device was highly stable for successive switching cycles with very low attenuation. To our knowledge, this is the first report of a Quantum dot embedded COF366 thin-film by chemical vapor deposition. The proposed interfacing of COF366-QD thin-films on silicon substrate using in situ low-temperature CVD technique can be highly valuable for the development of transfer-free, clean, and low-cost preparation of industrial-scale organic electronics, optoelectronic device applications, and lab-on-chip based technologies for a wide range of future applications.

Robust S-scheme hierarchical Au-ZnIn2S4/NaTaO3: Facile synthesis, superior photocatalytic H2 production and its charge transfer mechanism

Designing Step-scheme (S-scheme) heterojunction with the directional charge transfer pathway has been considered as a promising strategy for realizing effective spatial separation of photo-generated carriers in a photocatalytic system by utilizing broadband solar energy. Herein, the novel and ternary S-scheme heterojunction photocatalysts were fabricated by embedding Au nanoparticles (NPs) on the surface of ZnIn₂S₄/NaTaO₃ composites through a facile two-step hydrothermal method for the first time. As expected, it showed an enhanced hydrogen evolution rate of 11404 μmol g^-1 h^-1, which was approximately 58 and 10 times higher than that of the pristine NaTaO₃ nanocubes (197 μmol g^-1 h^-1) and ZnIn₂S₄ microspheres (1180 μmol g^-1 h^-1) under simulated sunlight irradiation, respectively. An intimate heterojunction interface as well as Au nanoparticles as electron reservoir and reactive sites, which enhanced light absorption capacity and accelerated charge carrier separation, was answerable to the huge promotion in the photocatalytic performance. Most notably, XPS, EPR analysis and density functional theory (DFT) calculation results, revealed that the presence of strong interfacial electric fields promoted superior separation efficiency in the Au-ZnIn₂S₄/NaTaO₃ S-scheme heterojunction. This innovative work may shed light on a more appealing and meaningful approach to modify sodium tantalate for the promising application in photocatalytic hydrogen generation.