Multidimensional In2O3/In2S3 heterojunction with lattice distortion for CO2 photoconversion

Na-mediated carbon nitride realizing CO2 photoreduction with selectivity modulation

The depressed directional separation of photogenerated carriers and weak CO2 adsorption/activation activity are the main factors hampering the development of artificial photosynthesis. Herein, Na ions are embedded in graphitic carbon nitride (g-C3N4) to achieve directional migration of the photogenerated electrons to Na sites, while the electron-rich Na sites enhance CO2 adsorption and activation. Na/g-C3N4 (NaCN) shows improved photocatalytic reduction activity of CO2 to CO and CH4, and under simulated sunlight irradiation, the CO yield of NaCN synthesized by embedding Na at 550°C (NaCN-550) is 371.2 μmol g-1 h-1, which is 58.9 times more than that of the monomer g-C3N4. By means of theoretical calculations and experiments including in situ fourier transform infrared spectroscopy, the mechanism is investigated. This strategy which improves carrier separation and reduces the energy barrier at the same time is important to the development of artificial photosynthesis.

Asymmetric Atomic Dual-Sites for Photocatalytic CO2 Reduction

Atomically dispersed active sites in a photocatalyst offer unique advantages such as locally tuned electronic structures, quantum size effects, and maximum utilization of atomic species. Among these, asymmetric atomic dual-sites are of particular interest because their asymmetric charge distribution generates a local built-in electric potential to enhance charge separation and transfer. Moreover, the dual sites provide flexibility for tuning complex multielectron and multireaction pathways, such as CO2 reduction reactions. The coordination of dual sites opens new possibilities for engineering the structure-activity-selectivity relationship. This comprehensive overview discusses efficient and sustainable photocatalysis processes in photocatalytic CO2 reduction, focusing on strategic active-site design and future challenges. It serves as a timely reference for the design and development of photocatalytic conversion processes, specifically exploring the utilization of asymmetric atomic dual-sites for complex photocatalytic conversion pathways, here exemplified by the conversion of CO2 into valuable chemicals.

Breaking the intrinsic activity barriers of bilayer metal oxides for catalytic CO2 reduction

The photocatalytic CO2 reduction reaction is severely limited by sluggish charge kinetics. To address this issue, a strategy utilizing non-metal-doped layered double hydroxide (LDH) has been developed to control the electronic structure of spindle-shaped nanoflowers, resulting in efficient photocatalytic CO2 reduction. The results demonstrate that the designed catalyst yields 263.16 μmol g-1 h-1 for the photoreduction of CO2 to CO. Furthermore, the in situ Fourier transform infrared spectrum (FT-IR) analysis demonstrate that the specific S-ligand (S-bridge) facilitates CO2 activation, ensuring the continuous production of *COOH. The hydrothermal-assisted ionic liquid method proposed in this study offers guidance for modifying catalysts.

Dual p-n Z-scheme heterostructure boosted superior photoreduction CO2 to CO, CH4 and C2H4 in In2S3/MnO2/BiOCl photocatalyst

The creation of a Z-scheme heterojunction is a sophisticated strategy to enhance photocatalytic efficiency. In our study, we synthesized an In2S3/MnO2/BiOCl dual Z-scheme heterostructure by growing BiOCl nanoplates on the sheets of In2S3 nanoflowers, situated on the surface of MnO2 nanowires. This synthesis involved a combination of hydrothermal and solution combustion methods. Experiments and density functional theory (DFT) calculations demonstrated that the In2S3/MnO2/BiOCl composite exhibited notable photo reduction performance and photocatalytic stability. This was attributed to the pivotal roles of BiOCl and MnO2 in the composite, acting as auxiliaries to enhance the electronic structure and facilitate the adsorption/activation capacity of CO2 and H2O. The yield rates of CO, CH4, and C2H4 over In2S3/MnO2/BiOCl as the catalyst were 3.94, 5.5, and 3.64 times higher than those of pure In2S3, respectively. Photoelectrochemical analysis revealed that the dual Z-scheme heterostructure, with its oxygen vacancies and large surface area, enhanced CO2 absorption and active sites on the nanoflower/nanowire intersurfaces. Consequently, the dual Z-scheme charge transfer pathway provided efficient channels for boosting electron transfer and charge separation, resulting in high C2H4, CH4, and CO yields of formed and exihibits an promising photoreduction rate of CO2 to CO (51.2 µmol/g.h), CH4 (42.4 µmol/g.h) and C2H4 (63.2 µmol/g.h), respectively. DFT, in situ Diffuse reflectance infrared fourier transform spectroscopy, and temperature-programmed desorption tests were employed to verify the intermediates pathway. The study proposed a potential photocatalytic mechanism based on these findings.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Rich oxygen vacancies in confined heterostructured TiO2@In2S3 hybrid for boosting solar-driven CO2 reduction

Solar energy driving CO2 reduction is a potential strategy that not only mitigates the greenhouse effect caused by high CO2 level in atmosphere, but also yields carbon chemicals/fuels at the same time. Herein, a facile way to design the heterogeneous TiO2@In2S3 hollow structures possessing robust light harvesting in both ultraviolet and visible regions is proposed and exhibits a higher generation rate of 25.35 and 1.24 μmol·g-1·h-1 for photocatalytic CO2 reduction to CO and CH4, respectively. The excellent photocatalytic catalytic performance comes from i) the confined heterostructured TiO2@In2S3 possesses a suitable band structure and a broadband-light absorbing capacity for CO2 photoreduction, ii) the rich interfaces between nanosized TiO2 and In2S3 on the shell can significantly reduce the diffusion length of carriers and enhance the utilization efficiency of photogenerated electron-hole pairs, and iii) enriched surface oxygen vacancies can provide more active sites for CO2 adsorption.

Pivotal Impact Factors in Photocatalytic Reduction of CO2 to Value-Added C1 and C2 Products

Over the past decades, CO2 greenhouse emission has been considerably increased, causing global warming and climate change. Indeed, converting CO2 into valuable chemicals and fuels is a desired option to resolve issues caused by its continuous emission into the atmosphere. Nevertheless, CO2 conversion has been hampered by the ultrahigh dissociation energy of C=O bonds, which makes it thermodynamically and kinetically challenging. From this prospect, photocatalytic approaches appear promising for CO2 reduction in terms of their efficiency compared to other traditional technologies. Thus, many efforts have been made in the designing of photocatalysts with asymmetric sites and oxygen vacancies, which can break the charge distribution balance of CO2 molecule, reduce hydrogenation energy barrier and accelerate CO2 conversion into chemicals and fuels. Here, we review the recent advances in CO2 hydrogenation to C1 and C2 products utilizing photocatalysis processes. We also pin down the key factors or parameters influencing the generation of C2 products during CO2 hydrogenation. In addition, the current status of CO2 reduction is summarized, projecting the future direction for CO2 conversion by photocatalysis processes.

Engineering highly dispersed AgI nanoparticles on hierarchical In2S3 hollow nanotube to construct Z-scheme heterojunction for efficient photodegradation of insecticide imidacloprid

Increasing the exposure of active sites and improving the intrinsic activity are necessary considerations for designing a highly efficient photocatalyst. Herein, an In2S3/AgI stable Z-scheme heterojunction with highly dispersed AgI nanoparticles (NPs) is synthesized by the mild self-templated and in-situ ion exchange strategy. Impressively, the optimized In2S3/AgI-300 Z-scheme heterojunction exhibits superior photodegradation activity (0.020 min-1) for the decomposition of insecticide imidacloprid (IMD), which is extremely higher than that of pure In2S3 (0.002 min-1) and AgI (0.013 min-1). Importantly, the three-dimensional excitation-emission matrix (3D EEMs) fluorescence spectra, high-resolution mass spectrometry (HRMS), the photoelectrochemical tests, radical trapping experiment, and electron spin resonance (ESR) technique are performed to clarify the possible degradation pathway and mechanism of IMD by the In2S3/AgI-300 composite. The enhanced photocatalytic performance is attributed to the highly dispersed AgI NPs on hierarchical In2S3 hollow nanotube and the construction of In2S3/AgI Z-scheme heterojunction, which can not only increase active site exposure, but also improve its intrinsic activity, facilitating rapid charge transfer rate and excellent electron-hole pairs separation efficiency. Meanwhile, the practical application potential of the In2S3/AgI-300 composite is systematically investigated. This study opens a new insight for designing catalysts with high photocatalytic performance through a convenient approach.

Adjacent Mn site boosts photocatalytic hydrogen evolution of MnXCd1-XS solid solution through a dual-metal-site design

CdS has emerged as a possible candidate for photocatalytic hydrogen generation. However, further improvement in the performance of the Cd metal site is challenging due to limited optimization space. To solve this limitation, in this work, the Mn-Cd dual-metal photocatalyst was synthesized by a one-step solvothermal method, and the effects of different proportions of bimetals on hydrogen production activity were systematically studied. The ingenious design of the bimetallic sites enhances the carrier separation efficiency and the built-in electric field intensity, which leads to significant improvement in the photocatalytic hydrogen production performance of MCS0.19. Density functional theory (DFT) calculations confirm that the introduction of the Mn element can drive electrons through the Fermi level, resulting in enhanced conductivity of the catalyst. Meanwhile, electron channels are built between Mn and S, which speeds up the rate of electron transfer and is conducive to improving hydrogen production activity. This work provides a technical-methodological entrance to improve the photocatalytic hydrogen production performance of dual-metal S solid solutions and also promises to open a novel approach to creating high-efficiency solid solution photocatalysts.

Spatial charge separated two-dimensional/two-dimensional Cu-In2S3/CdS heterojunction for boosting photocatalytic hydrogen production

Two-dimensional (2D) beta indium sulfide (β-In2S3) shows great potential in photocatalytic hydrogen production due to its broad-spectrum response, relatively negative conduction band edge, high carrier mobility and low toxicity. However, the high charge recombination rate limits the application of In2S3. Here, we in-situ grew 2D cadmium sulfide (CdS) on the surface of In2S3 doped with copper ions (Cu2+) to construct a heterojunction photocatalyst that suppresses charge recombination. The in-situ grown method and shared sulfur composition were conducive to forming the efficient interface contact between In2S3 and CdS, promoting charge transfer and showing the high spatial charge separation rate, resulting in a hydrogen production rate of 868 µmol g-1h-1. The induced Cu2+ extended the light absorption range and stabilized the photocatalyst. By creating stable 2D/2D heterojunction photocatalysts with high charge separation efficiency, this work opens new possibilities for applying In2S3 materials in photocatalytic hydrogen production.

MOF-Derived In2O3 Microrod-Decorated MgIn2S4 Nanosheets: Z-Scheme Heterojunction for Efficient Photocatalytic Degradation of Tetracycline

The construction of Z-scheme heterostructures using matching band semiconductors is an effective strategy for producing highly efficient photocatalysts. In this study, MgIn2S4(MIS) was grown in situ on In2O3 microrods created with an In-based MOF material (In-MIL-68) as a template to successfully establish a unique MIS-In2O3 heterojunction with a well-matched Z-scheme interface charge transfer channel. Tetracycline (TC) as a typical antibiotic was chosen as the target pollutant to evaluate the photocatalytic activity. After 120 min of visible light irradiation, the MIS-In2O3-(10:1) material had the greatest photocatalytic degradation activity of tetracycline with 96.55%, which was 2.39 and 4.26 times that of MIS and In2O3, respectively. The improved photocatalytic activity is attributed to the in situ growth of MIS on In2O3, forming a Z-scheme heterojunction at the interface, which not only increases the specific surface area, exposes the abundant active site, and improves light utilization but also facilitates the migration and separation of photogenic carriers. The photocatalytic degradation products of TC were detected by liquid chromatography-mass spectrometry (LC-MS), and a preliminary degradation pathway was proposed. Radical capture experiments and ESR analysis confirmed that the main active species were holes (h+), superoxide radicals (•O2-), and superoxide and hydroxyl radicals (•OH). Finally, combined with band position analysis, this study proposes a direct Z-scheme heterojunction mechanism to improve the photocatalytic degradation of tetracycline in MIS under visible light.

Stacking Engineering of Heterojunctions in Half-Metallic Carbon Nitride for Efficient CO2 Photoreduction

Enhancing charge separation in semiconductor photocatalysts is a major challenge for efficient artificial photosynthesis. Herein, a compact heterojunction is designed by embedding half-metallic C(CN)3 (hm-CN) hydrothermally in BiOBr (BOB) as the backbone. The interface between hm-CN and BOB is seamless and formed by covalent bonding to facilitate the transmission of photoinduced electrons from BOB to hm-CN. The transient photocurrents and electrochemical impedance spectra reveal that the modified composite catalyst exhibits a larger electron transfer rate. The photocatalytic activity of hm-CN/BOB increases significantly as indicated by a CO yield that is about four times higher than that of individual components. Density-functional theory calculations verify that the heterojunction improves electron transport and decreases the reaction energy barrier, thus promoting the overall photocatalytic CO2 conversion efficiency. The half-metal nitride coupled semiconductor heterojunctions might have large potential in artificial photosynthesis and related applications.

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution

Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further improve the performance of materials, researchers have combined materials with various dimensions using a wide variety of techniques. However, research on growth mechanism of such composite materials is still lacking. In this paper, the growth mechanism of multi-dimensional heterojunction composite material is studied using quasi-two-dimensional (quasi-2D) antimonene and quasi-one-dimensional (quasi-1D) antimony sulfide as examples. These are synthesized by a simple thermal injection method. It is observed that the consequent nanorods are oriented along six-fold symmetric directions on the nanoplate, forming ordered quasi-1D/quasi-2D heterostructures. Comprehensive transmission electron microscopy (TEM) characterizations confirm the chemical information and reveal orientational relationship between Sb2S3 nanorods and the Sb nanoplate as substrate. Further density functional theory calculations indicate that interfacial binding energy is the primary deciding factor for the self-assembly of ordered structures. These details may fill the gaps in the research on multi-dimensional composite materials with ordered structures, and promote their future versatile applications.

Lattice Distortion in a Confined Structured ZnS/ZnO Heterojunction for Efficient Photocatalytic CO2 Reduction

It is a promising strategy to effectively promote "carbon neutrality" by reducing CO₂ to small energy molecules through photocatalysis technology. However, due to low light utilization and recombination of photogenerated carriers, photocatalysts usually have low activity and low selectivity for products. Herein, a hollow spherical ZnS/ZnO heterojunction with a spatial confinement effect photocatalyst was synthesized toward CO₂ photoreduction through preciously controlling the nano-/microstructure. The local lattice distortions were introduced into the surface of the hollow ZnS/ZnO microsphere, which activated lattice oxygen and provided additional active reaction sites. Furthermore, the heterojunction constructed between ZnS and ZnO interfaces facilitated the separation of photoinduced charge carriers. Combined with the natural advantage of enhanced light capture and absorption for a hollow confined structure, as a result, the systemic design in the electronic and confined structures for the photocatalyst has brought an excellent CO₂ reduction performance with a CO yield rate as high as 35.85 μmol g^-1h^-1 and durability under a 300 W Xe lamp irradiation without any sacrificial agent and cocatalyst.

Urchin-like band-matched Fe2O3@In2S3 hybrid as an efficient photocatalyst for CO2 reduction

Herein, an urchin-like Fe₂O₃@In₂S₃ hybrid composite is designed and synthesized using a facile process. The composite efficiently harvests light in both the ultraviolet and visible regions, and the unique hierarchical structure provides several advantages for photocatalytic applications: (i) a suitable band-matching structure and broadband-light absorbing capacity enable the reduction of CO₂ into hydrocarbon, (ii) the extensive network of interfacial contact between nano-sized Fe₂O₃ and In₂S₃ significantly increases the separation of charge carriers and enhances the utilization of photogenerated electron-hole pairs, and (iii) an abundance of surface oxygen vacancies provide numerous active sites for CO₂ molecule adsorption. The optimized Fe₂O₃@In₂S₃ composite generated CO from the photocatalytic reduction of CO₂ at a rate of 42.83 μmol·g^-1·h^-1, and no signs of deactivation were observed during continued testing for 32 h under 300 W Xe lamp irradiation.

Highly Efficient and Exceptionally Durable Photooxidation Properties on Co3O4/g-C3N4 Surfaces

Water pollution is a significant social issue that endangers human health. The technology for the photocatalytic degradation of organic pollutants in water can directly utilize solar energy and has a promising future. A novel Co₃O₄/g-C₃N₄ type-II heterojunction material was prepared by hydrothermal and calcination strategies and used for the economical photocatalytic degradation of rhodamine B (RhB) in water. Benefitting the development of type-II heterojunction structure, the separation and transfer of photogenerated electrons and holes in 5% Co₃O₄/g-C₃N₄ photocatalyst was accelerated, leading to a degradation rate 5.8 times higher than that of pure g-C₃N₄. The radical capturing experiments and ESR spectra indicated that the main active species are •O₂^- and h⁺. This work will provide possible routes for exploring catalysts with potential for photocatalytic applications.

Incorporating Fe, Co co-doped graphene with PDI supermolecular for promoted photocatalytic activity: A story of electron transfer

Iron-cobalt dual single-atom anchoring on nitrogen-doped graphene (Fe_xCo_y-NG) improves the efficiency of migration and separation of photo-generated carriers. In this work, the perylene diimide (PDI) is self-assembled on the Fe_xCo_y-NG to form the Fe_xCo_y-NG/PDI composites by π-π interaction, which is reported for the first time. The bisphenol A (BPA) degradation of optimized 20% Fe_0.2Co_0.8-NG/PDI are nearly 100%, and the degradation rate is 1.5 and 12.7 times that of the self-assembled PDI and commercial-grade PDI. The high degradation performance by Fe_xCo_y-NG/PDI are mainly due to: (i) regulating the proportion of Fe-Co dual active sites content, so that it can achieve the synergistic interaction to facilitate the transfer of electrons in the catalytic reaction. (ii) PDI is uniformly dispersed by adding the Fe_xCo_y-NG, which increases the specific surface area of composites to adsorb more pollutants. Free radical trapping experiments and electron spin-resonance spectroscopy characterization confirmed that the O₂^-, OH, ¹O₂ and h⁺ are the main reactive species (RSs) for BPA degradation. Under the attack of RSs, BPA completes the processes of hydroxylation, demethylation, aromatization, ring-opening, and finally complete mineralization into CO₂ and H₂O. These results revealed that Fe_0.2Co_0.8-NG/PDI photocatalysts may be efficiently applied for the remediation of phenol contaminated natural waters.

Electronic and energy level structural engineering of graphitic carbon nitride nanotubes with B and S co-doping for photocatalytic hydrogen evolution

The ideal photocatalyst used for photocatalytic water splitting requires strong light absorption, fast charge separation/transfer ability and abundant active sites. Heteroatom doping offers a promising and rational approach to optimize the photocatalytic activity. However, achieving high photocatalytic performance remains challenging if just relying on single-element doping. Herein, Boron (B) and sulfur (S) dopants are simultaneously introduced into graphitic carbon nitride (g-C₃N₄) nanotubes by supramolecular self-assembly strategy. The developed B and S co-doped g-C₃N₄ nanotubes (B,S-TCN) exhibited an outstanding photocatalytic performance in the conversion of H₂O into H₂ (9.321 mmol g^-1h^-1), and the corresponding external quantum efficiency (EQE) reached 5.3% under the irradiation of λ = 420 nm. It is well evidenced by the closely combined experimental and (density functional theory) DFT calculations: (1) the introduction of B dopants can facilitate H₂O adsorption and drive interatomic electron transfer, leading to efficient water splitting reaction. (2) S dopants can stretch the VB position to promote the oxidation ability of g-C₃N₄, which can accelerate the consumption of holes and thus inhibit the recombination with electrons. (3) the simultaneous introduction of B and S can engineer the electronic and energy level structural of g-C₃N₄ for optimizing interior charge transfer. Finally, the purpose of maximizing photocatalytic performance is achieved.

Engineering surface bromination in carbon nitride for efficient CO2 photoconversion to CH4

The direct conversion of CO₂ into reusable CH₄ fuel by solar energy can effectively solve the problems of energy crisis and carbon emissions. However, the challenge of photocatalytic CO₂ reduction to produce CH₄ is still low conversion efficiency and poor selectivity. Here, surface brominated carbon nitride (named CNBr) is fabricated for stable and efficient photocatalytic CO₂ reduction to produce CH₄ with a rate of 16.68 μmol h^-1 g^-1 (70.27 % selectivity). Br atom in CNBr can substitute the N atom in the tri-s-triazine unites, which promotes local charge separation, narrows band gap and deepens the conduction band of CNBr. Benefiting from Br as active sites, CO₂ can be enriched on the catalyst surface, and localized photogenerated electrons can activate the adsorbed CO₂ to form CH₄ through subsequent hydrogenation. Density functional theory results suggest that Br doping can effectively reduce the energy barrier of the rate-limiting step, accelerate the reaction, and induce the formation of *CHO, thereby improving the selectivity of CH₄. This work reveals that surface modification can simultaneously increase the activation site of CO₂ adsorption activation, enhance light absorption and accelerate charge, laying a solid foundation for the future design of carbon nitride based photocatalyst with high performance.

Synergistic Effect in Plasmonic CuAu Alloys as Co-Catalyst on SnIn4S8 for Boosted Solar-Driven CO2 Reduction

The photoreduction of CO2 to chemical fuels represents a promising technology to mitigate the current energy dilemma and global warming problems. Unfortunately, the original photocatalysts suffer from many side reactions and a poor CO2 conversion efficiency. The rational combination of active co-catalyst with pristine photocatalysts for promoting the adsorption and activation of CO2 is of vital importance to tackle this grand challenge. Herein, we rationally designed a SnIn4S8 nanosheet photocatalyst simultaneously equipped with CuAu alloys. The experimental results proved that the CuAu alloy can trap the electrons and enhance the separation and transport efficiency of the photogenerated carrier in the photocatalyst, alleviating the kinetical difficulty of the charge transfer process because of the preferable localized surface plasmon resonance (LSPR). Furthermore, the CuAu alloy works as the synergistic site to increase the CO2 adsorption and activation capacity. The optimized CuAu-SnIn4S8 photocatalyst exhibited a superior performance with CO generation rates of 27.87 μmol g−1 h−1 and CH4 of 7.21 μmol g−1 h−1, which are about 7.6 and 2.5 folds compared with SnIn4S8. This work highlights the critical role of alloy cocatalysts in boosting a CO2 activation and an efficient CO2 reduction, thus contributing to the development of more outstanding photocatalytic systems.