Evaluation of milk compositional variables on coagulation properties using partial least squares

Spectroscopic technologies and data fusion: Applications for the dairy industry

Increasing consumer awareness, scale of manufacture, and demand to ensure safety, quality and sustainability have accelerated the need for rapid, reliable, and accurate analytical techniques for food products. Spectroscopy, coupled with Artificial Intelligence-enabled sensors and chemometric techniques, has led to the fusion of data sources for dairy analytical applications. This article provides an overview of the current spectroscopic technologies used in the dairy industry, with an introduction to data fusion and the associated methodologies used in spectroscopy-based data fusion. The relevance of data fusion in the dairy industry is considered, focusing on its potential to improve predictions for processing traits by chemometric techniques, such as principal component analysis (PCA), partial least squares regression (PLS), and other machine learning algorithms.

The mineral profile affects the coagulation pattern and cheese-making efficiency of bovine milk

Natural variations in milk minerals, their relationships, and their associations with the coagulation process and cheese-making traits present an opportunity for the differentiation of milk destined for high-quality natural products, such as traditional specialties or Protected Designation of Origin (PDO) cheeses. The aim of this study was to quantify the effects of the native contents of Ca, P, Na, K, and Mg on 18 traits describing traditional milk coagulation properties (MCP), curd firming over time (CF_t) equation parameters, cheese yield (CY) measures, and nutrient recoveries in the curd (REC) using models that either included or omitted the simultaneous effects of milk fat and casein contents. The results showed that, by including milk fat and casein and the minerals in the statistical model, we were able to determine the specific effects of each mineral on coagulation and cheese-making efficiency. In general, about two-thirds of the apparent effects of the minerals on MCP and the CF_t equation parameters are actually mediated by their association with milk composition, especially casein content, whereas only one-third of the effects are direct and independent of milk composition. In the case of cheese-making traits, the effects of the minerals were mediated only negligibly by their association with milk composition. High Ca content had a positive effect on the coagulation pattern and cheese-making traits, favoring water retention in the curd in particular. Phosphorus positively affected the cheese-making traits in that it was associated with an increase in CY in terms of curd solids, and in all the nutrient recovery traits. However, a very high P content in milk was associated with lower fat recovery in the curd. The variation in the Na content in milk only mildly affected coagulation, whereas with regard to cheese-making, protein recovery was negatively associated with high concentrations of this mineral. Potassium seemed not to be actively involved in coagulation and the cheese-making process. Magnesium content tended to slow coagulation and reduce CY measures. Further studies on the relationships of minerals with casein and protein fractions could deepen our knowledge of the role of all minerals in coagulation and the cheese-making process.

Relationships between cheese-processing conditions and curd and cheese properties to improve the yield of Idiazabal cheese made in small artisan dairies: A multivariate approach

Very diverse cutting and cooking intensity processes are currently used in small artisan dairies to manufacture Idiazabal cheese. The combination of the technical settings used during cheese manufacturing is known to affect cheese composition and yield, as well as whey losses. However, the information regarding the effect on microstructure and texture of cheese is scarce, especially in commercial productions. Therefore, the effect of moderate- and high-intensity cutting and cooking processes on whey losses, curd-grain characteristics, microstructure and cheese properties, and yield were analyzed. Three trials were monitored in each of 2 different small dairies during the cheesemaking of Idiazabal cheese, which is a semihard cheese made from raw sheep milk. The role and know-how of the cheesemakers are crucial in these productions because they determine the cutting point and handle semi-automatic vats. The 2 dairies studied used the following settings: dairy A used moderate-intensity cutting and cooking conditions, and dairy B used high-intensity cutting and cooking settings. Multiple relationships between cheese-processing conditions and curd, whey, and cheese properties as well as yield were obtained from a partial least square regression analysis. An increased amount of fat and casein losses were generated due to a combination of an excessively firm gel at cutting point together with high-intensity cutting and cooking processes. The microstructural analysis revealed that the porosity of the protein matrix of curd grains after cooking and cheese after pressing was the main feature affected, developing a less porous structure with a more intense process. Moderate-intensity cutting and cooking processes were associated with a higher cheese yield, regardless of the longer pressing process applied. No significant differences were observed in cheese composition. After 1 mo of ripening, however, the cheese was more brittle and adhesive when the high-intensity cutting and cooking process was applied. This could be associated with the composition, characteristics, and size distribution of curd grains due to differences in the compaction degree during pressing. These results could help to modify specific conditions used in cheesemaking, especially improving the process in those small dairies where the role of the cheesemaker is crucial.

Effect of Sheep's Milk Composition on Strength and Syneresis of Rennet-Induced Milk Gel During Lactation

This study investigates the effects of raw sheep’s milk composition on the strength and syneresis of obtained gels throughout the lactation. Casein, fat and total solids content, as well as ionic calcium mass fraction significantly (p<0.05) increased during lactation. As lactation progressed, milk formed firmer gel with higher syneresis ability. Increasing casein to fat ratio in sheep’s milk significantly increased (p<0.05) gel strength and syneresis. On the other hand, gel strength and syneresis were significantly reduced as a result of increased fat content in sheep’s milk. Ionic calcium mass fraction affected gel strength but not syneresis. Neither gel strength nor syneresis were affected by casein and urea content or by somatic cell count in sheep’s milk. Correlation coefficients between milk components and gel strength, as well as syneresis, were significant (p<0.01, p<0.05) but never higher than 0.35.

Genetic relationships of lactose and freezing point with minerals and coagulation traits predicted from milk mid-infrared spectra in Holstein cows

The aim of the present study was to assess the relationships of lactose percentage (LP), lactose yield (LY), and freezing point (FRP) with minerals and coagulation properties predicted from mid-infrared spectra in bovine milk. To achieve this purpose, we analyzed 54,263 test-day records of 4,297 Holstein cows to compute (co)variance components with a linear repeatability animal model. Parity, stage of lactation, season of calving, and herd-test-date were included as fixed effects in the model, and additive genetic animal, within- and across-lactation permanent environment, and residual were included as random effects. Lactose percentage was more heritable (0.405 ± 0.027) than LY (0.121 ± 0.021) and FRP (0.132 ± 0.014). Heritabilities (± standard error) of predicted milk minerals varied from 0.375 ± 0.027 for Na to 0.531 ± 0.028 for P, and those of milk coagulation properties ranged from 0.348 ± 0.052 for rennet coagulation time to 0.430 ± 0.026 for curd firming time. Lactose percentage showed favorable (negative) genetic correlations with milk somatic cell score (SCS) and FRP, and it was almost uncorrelated with casein-related minerals (Ca and P) and coagulation properties. Moreover, LP was strongly correlated with Na (-0.783 ± 0.022), a mineral known to increase in the presence of intramammary infection (IMI) and high somatic cell count. Indeed, Na is the main osmotic replacer of lactose in mastitic milk when the blood-milk barrier is altered during IMI. Being strongly associated with milk yield, LY did not favorably correlate with coagulation properties, likely because of the negative correlation of this trait with protein and casein percentages. Milk FRP presented moderate and null genetic associations with Na and SCS, respectively. Results of the present study suggest that the moderate heritability of LP and its genetic correlations with IMI-related traits (Na and SCS) could be exploited for genetic selection against mastitis. Moreover, selection for LP would not impair milk coagulation characteristics or Ca and P content, which are important for cheesemaking.

Pathway-based genome-wide association analysis of milk coagulation properties, curd firmness, cheese yield, and curd nutrient recovery in dairy cattle

It is becoming common to complement genome-wide association studies (GWAS) with gene-set enrichment analysis to deepen the understanding of the biological pathways affecting quantitative traits. Our objective was to conduct a gene ontology and pathway-based analysis to identify possible biological mechanisms involved in the regulation of bovine milk technological traits: coagulation properties, curd firmness modeling, individual cheese yield (CY), and milk nutrient recovery into the curd (REC) or whey loss traits. Results from 2 previous GWAS studies using 1,011 cows genotyped for 50k single nucleotide polymorphisms were used. Overall, the phenotypes analyzed consisted of 3 traditional milk coagulation property measures [RCT: rennet coagulation time defined as the time (min) from addition of enzyme to the beginning of coagulation; k₂₀: the interval (min) from RCT to the time at which a curd firmness of 20 mm is attained; a₃₀: a measure of the extent of curd firmness (mm) 30 min after coagulant addition], 6 curd firmness modeling traits [RCT_eq: RCT estimated through the CF equation (min); CF_P: potential asymptotic curd firmness (mm); k_CF: curd-firming rate constant (% × min^-1); k_SR: syneresis rate constant (% × min^-1); CF_max: maximum curd firmness (mm); and t_max: time to CF_max (min)], 3 individual CY-related traits expressing the weight of fresh curd (%CY_CURD), curd solids (%CY_SOLIDS), and curd moisture (%CY_WATER) as a percentage of weight of milk processed and 4 milk nutrient and energy recoveries in the curd (REC_FAT, REC_PROTEIN, REC_SOLIDS, and REC_ENERGY calculated as the % ratio between the nutrient in curd and the corresponding nutrient in processed milk), milk pH, and protein percentage. Each trait was analyzed separately. In total, 13,269 annotated genes were used in the analysis. The Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway databases were queried for enrichment analyses. Overall, 21 Gene Ontology and 17 Kyoto Encyclopedia of Genes and Genomes categories were significantly associated (false discovery rate at 5%) with 7 traits (RCT, RCT_eq, k_CF, %CY_SOLIDS, REC_FAT, REC_SOLIDS, and REC_ENERGY), with some being in common between traits. The significantly enriched categories included calcium signaling pathway, salivary secretion, metabolic pathways, carbohydrate digestion and absorption, the tight junction and the phosphatidylinositol pathways, as well as pathways related to the bovine mammary gland health status, and contained a total of 150 genes spanning all chromosomes but 9, 20, and 27. This study provided new insights into the regulation of bovine milk coagulation and cheese ability that were not captured by the GWAS.