Liquid phase electron-beam-induced deposition on bulk substrates using environmental scanning electron microscopy

Electrochemical Lensing for High Resolution Nanostructure Synthesis in Liquids

The advancement of liquid phase electron/ion beam induced deposition has enabled an effective direct-write approach for functional nanostructure synthesis with the possibility of three-dimensional control of morphology. For formation of a metallic solid phase, the process employs ambient temperature, beam-guided, electrochemical reduction of precursor cations, resulting in rapid formation of structures, but with challenges for retention of resolution achievable via slower electron beam approaches. The possibility of spatial control of redox pathways via the use of water-ammonia solvents has opened avenues for improved nanostructure resolution without sacrificing the growth rate. In particular, ammonia enables "electrochemical lensing" in which a tightly confined and highly reducing environment is created locally to enable high resolution, rapid beam-directed nanostructure growth. We demonstrate this unique approach to high resolution synthesis through a combination of analysis and experiment.

Direct In- and Out-of-Plane Writing of Metals on Insulators by Electron-Beam-Enabled, Confined Electrodeposition with Submicrometer Feature Size

Additive microfabrication processes based on localized electroplating enable the one-step deposition of micro-scale metal structures with outstanding performance, e.g., high electrical conductivity and mechanical strength. They are therefore evaluated as an exciting and enabling addition to the existing repertoire of microfabrication technologies. Yet, electrochemical processes are generally restricted to conductive or semiconductive substrates, precluding their application in the manufacturing of functional electric devices where direct deposition onto insulators is often required. Here, the direct, localized electrodeposition of copper on a variety of insulating substrates, namely Al2O3, glass and flexible polyethylene, is demonstrated, enabled by electron-beam-induced reduction in a highly confined liquid electrolyte reservoir. The nanometer-size of the electrolyte reservoir, fed by electrohydrodynamic ejection, enables a minimal feature size on the order of 200 nm. The fact that the transient reservoir is established and stabilized by electrohydrodynamic ejection rather than specialized liquid cells can offer greater flexibility toward deposition on arbitrary substrate geometries and materials. Installed in a low-vacuum scanning electron microscope, the setup further allows for operando, nanoscale observation and analysis of the manufacturing process.

Ligand Size and Carbon-Chain Length Study of Silver Carboxylates in Focused Electron-Beam-Induced Deposition

Gas-assisted focused electron-beam-induced deposition is a versatile tool for the direct writing of complex-shaped nanostructures with unprecedented shape fidelity and resolution. While the technique is well-established for various materials, the direct electron beam writing of silver is still in its infancy. Here, we examine and compare five different silver carboxylates, three perfluorinated: [Ag₂(µ-O₂CCF₃)₂], [Ag₂(µ-O₂CC₂F₅)₂], and [Ag₂(µ-O₂CC₃F₇)₂], and two containing branched substituents: [Ag₂(µ-O₂CCMe₂Et)₂] and [Ag₂(µ-O₂C^tBu)₂], as potential precursors for focused electron-beam-induced deposition. All of the compounds show high sensitivity to electron dissociation and efficient dissociation of Ag-O bonds. The as-deposited materials have silver contents from 42 at.% to above 70 at.% and are composed of silver nano-crystals with impurities of carbon and fluorine between them. Precursors with the shortest carbon-fluorine chain ligands yield the highest silver contents. In addition, the deposited silver content depends on the balance of electron-induced ligand co-deposition and ligand desorption. For all of the tested compounds, low electron flux was related to high silver content. Our findings demonstrate that silver carboxylates constitute a promising group of precursors for gas-assisted focused electron beam writing of high silver content materials.

Direct writing of silicon nanostructures using liquid-phase electron beam induced deposition of hydrosilanes

Solid Si (wafer) and gaseous Si (silane) are generally used as starting materials for fabricating Si devices. In this study, a liquid precursor (liquid-phase hydrosilane) for semiconducting Si, called liquid Si (liq-Si), was synthesized to establish a liquid pathway for fabricating Si. Although the liquid-to-solid Si conversion can be induced by heating at 400 °C, conversion without heating was realized herein by electron-beam (EB) irradiation. This study is the first to irradiate liq-Si with EB. Size-controllable Si nanodots, with diameters of the order of 100 nm, were directly deposited at any point by liquid-phase electron-beam-induced deposition (LP-EBID) with a beam diameter of 50 nm. This approach yielded less-contaminated deposits at the detection limit of energy-dispersive x-ray spectroscopy, as opposed to typical EBID, wherein carbon impurities up to 90% are found. The processing resolution of LP-EBID is potentially 1 nm or less. Therefore, this non-heating deposition technique realizes the direct writing of Si nanostructures and would be a powerful tool for Si nanofabrication.

Limiting regimes for electron-beam induced deposition of copper from aqueous solutions containing surfactants

Focused electron beam induced deposition of pure materials from aqueous solutions has been of interest in recent years. However, controlling the liquid film in partial vacuum is challenging. Here we modify the substrate to increase control over the liquid layer in order to conduct a parametric study of copper deposition in an environmental scanning electron microscope. We identified the transition from electron to mass-transport limited deposition as well as two additional regimes characterized by aggregated and high-aspect ratio deposits. We observe a high deposition efficiency of 1-10 copper atoms per primary electron that is consistent with a radiation chemical model of the deposition process.

Nanoscale focused electron beam induced etching of nickel using a liquid reactant

Nickel nanostructures have found widespread application as both functional components, e.g. in magnetic systems, and as part of the lithographic pattern transfer process as etch masks, EUV mask absorbers, and imprint templates. Electron-beam induced etching of nickel is highly desirable for the repair and editing of masks and templates with high resolution and without substrate damage. However, there are no known gas-phase reactants that produce volatile nickel products under e-beam irradiation. Here we report the successful local etching of nickel by a focused electron beam in an environmental scanning electron microscope using a liquid reactant, aqueous sulfuric acid. Sulfuric acid did not spontaneously etch nickel under ESEM conditions, but nickel was etched in areas exposed to the electron beam. Etching parameters such as dose, refresh time, and addition of a surfactant were investigated. The extent of the etch increases with dose before terminating at sub-micron feature sizes. The etch resolution improves with the addition of surfactant. This approach enables local nickel patterning with complete film removal but without damaging underlying layers. With further refinement, the process may enable nickel absorber repair and editing and remove a significant obstacle to the use of nickel in EUV lithography.

Focused Electron Beam-Induced Deposition and Post-Growth Purification Using the Heteroleptic Ru Complex (η3-C3H5)Ru(CO)3Br

Focused electron beam-induced deposition using the heteroleptic complex (η³-C₃H₅)Ru(CO)₃Br as a precursor resulted in deposition of material with Ru content of 23 at. %. Transmission electron microscopy images indicated a nanogranular structure of pure Ru nanocrystals, embedded into a matrix containing carbon, oxygen, and bromine. The deposits were purified by annealing in a reactive 98% N₂/2% H₂ atmosphere at 300 °C, resulting in a reduction of contaminants and an increase of the Ru content to 83 at. %. Although a significant volume loss of 79% was found, the shrinkage was observed mostly for vertical thickness (around 75%). The lateral dimensions decreased much less significantly (around 9%). Deposition results, in conjunction with previous gas-phase and condensed-phase surface studies on the electron-induced reactions of (η³-C₃H₅)Ru(CO)₃Br, provide insights into the behavior of allyl, carbonyl, and bromide ligands under identical electron beam irradiation.

Ice lithography for 3D nanofabrication

Nanotechnology and nanoscience are enabled by nanofabrication. Electron-beam lithography, which makes 2D patterns down to a few nanometers, is one of the fundamental pillars of nanofabrication. Recently, significant progress in 3D electron-beam-based nanofabrication has been made, such as the emerging ice lithography technology, in which ice thin-films are patterned by a focused electron-beam. Here, we review the history and progress of ice lithography, and focus on its applications in efficient 3D nanofabrication and additive manufacturing or nanoscale 3D printing. The finest linewidth made using frozen octane is below 5 nm, and nanostructures can be fabricated in selected areas on non-planar surfaces such as freely suspended nanotubes or nanowires. As developing custom instruments is required to advance this emerging technology, we discuss the evolution of ice lithography instruments and highlight major instrumentation advances. Finally, we present the perspectives of 3D printing of functional materials using organic ices. We believe that we barely scratched the surface of this new and exciting research area, and we hope that this review will stimulate cutting-edge and interdisciplinary research that exploits the undiscovered potentials of ice lithography for 3D photonics, electronics and 3D nanodevices for biology and medicine.

The radiation chemistry of focused electron-beam induced etching of copper in liquids

Well-controlled, focused electron-beam induced etching of copper thin films has been successfully conducted on bulk substrates in an environmental scanning electron microscope by controlling liquid-film thickness with an in situ correlative interferometry system. Knowledge of the liquid-film thickness enables a hybrid Monte Carlo/continuum model of the radiation chemistry to accurately predict the copper etch rate using only electron scattering cross-sections, radical yields, and reaction rates from previous studies. Etch rates depended strongly on the thickness of the liquid film and simulations confirmed that this was a result of increased oxidizing radical generation. Etch rates also depended strongly, but non-linearly, on electron beam current, and simulations showed that this effect arises through the dose-rate dependence of reactions of radical species.

Focused electron beam induced deposition of copper with high resolution and purity from aqueous solutions

Electron-beam induced deposition of high-purity copper nanostructures is desirable for nanoscale rapid prototyping, interconnection of chemically synthesized structures, and integrated circuit editing. However, metalorganic, gas-phase precursors for copper introduce high levels of carbon contamination. Here we demonstrate electron beam induced deposition of high-purity copper nanostructures from aqueous solutions of copper sulfate. The addition of sulfuric acid eliminates oxygen contamination from the deposit and produces a deposit with ∼95 at% copper. The addition of sodium dodecyl sulfate (SDS), Triton X-100, or polyethylene glycole (PEG) improves pattern resolution and controls deposit morphology but leads to slightly reduced purity. High resolution nested lines with a 100 nm pitch are obtained from CuSO₄-H₂SO₄-SDS-H₂O. Higher aspect ratios (∼1:1) with reduced line edge roughness and unintended deposition are obtained from CuSO₄-H₂SO₄-PEG-H₂O. Evidence for radiation-chemical deposition mechanisms was observed, including deposition efficiency as high as 1.4 primary electrons/Cu atom.

Role of Gas Molecule Complexity in Environmental Electron Microscopy and Photoelectron Yield Spectroscopy

Environmental scanning electron microscopy (ESEM) and environmental photoelectron yield spectroscopy (EPYS) enable electron imaging and spectroscopy of surfaces and interfaces in low-vacuum gaseous environments. The techniques are both appealing and limited by the range of gases that can be used to amplify electrons emitted from a sample and used to form images/spectra. However, to date only H₂O and NH₃ gases have been identified as highly favorable electron amplification media. Here we demonstrate that ethanol vapor (CH₃CH₂OH) is superior to both of these and attribute its performance to its molecular complexity and valence orbital structure. Our findings improve the present understanding of what constitutes a favorable electron amplification gas and will help expand the applicability and usefulness of the ESEM and EPYS techniques.

Directing Matter: Toward Atomic-Scale 3D Nanofabrication

Enabling memristive, neuromorphic, and quantum-based computing as well as efficient mainstream energy storage and conversion technologies requires the next generation of materials customized at the atomic scale. This requires full control of atomic arrangement and bonding in three dimensions. The last two decades witnessed substantial industrial, academic, and government research efforts directed toward this goal through various lithographies and scanning-probe-based methods. These technologies emphasize 2D surface structures, with some limited 3D capability. Recently, a range of focused electron- and ion-based methods have demonstrated compelling alternative pathways to achieving atomically precise manufacturing of 3D structures in solids, liquids, and at interfaces. Electron and ion microscopies offer a platform that can simultaneously observe dynamic and static structures at the nano- and atomic scales and also induce structural rearrangements and chemical transformation. The addition of predictive modeling or rapid image analytics and feedback enables guiding these in a controlled manner. Here, we review the recent results that used focused electron and ion beams to create free-standing nanoscale 3D structures, radiolysis, and the fabrication potential with liquid precursors, epitaxial crystallization of amorphous oxides with atomic layer precision, as well as visualization and control of individual dopant motion within a 3D crystal lattice. These works lay the foundation for approaches to directing nanoscale level architectures and offer a potential roadmap to full 3D atomic control in materials. In this paper, we lay out the gaps that currently constrain the processing range of these platforms, reflect on indirect requirements, such as the integration of large-scale data analysis with theory, and discuss future prospects of these technologies.

Focused electron beam induced etching of copper in sulfuric acid solutions

We show here that copper can be locally etched by an electron-beam induced reaction in a liquid. Aqueous sulfuric acid (H2SO4) is utilized as the etchant and all experiments are conducted in an environmental scanning electron microscope. The extent of etch increases with liquid thickness and dose, and etch resolution improves with H2SO4 concentration. This approach shows the feasibility of liquid phase etching for material selectivity and has the potential for circuit editing.

Rapid Electron Beam Writing of Topologically Complex 3D Nanostructures Using Liquid Phase Precursor

Advancement of focused electron beam-induced deposition (FEBID) as a versatile direct-write additive nanoscale fabrication technique has been inhibited by poor throughput, limited choice of precursors, and restrictions on possible 3D topologies. Here, we demonstrate FEBID using nanoelectrospray liquid precursor injection to grow carbon and pure metal nanostructures via direct decomposition and electrochemical reduction of the relevant precursors, achieving growth rates 10(5) times greater than those observed in standard gas-phase FEBID. Initiating growth at the free surface of a liquid pool enables fabrication of complex 3D carbon nanostructures with strong adhesion to the substrate. Deposition of silver microstructures at similar growth rates is also demonstrated as a promising avenue for future development of the technique.

Direct-Writing of Cu Nano-Patterns with an Electron Beam

We demonstrate direct electron beam writing of a nano-scale Cu pattern on a surface with a thin aqueous layer of CuSO4 solution. Electron beams are highly maneuverable down to nano-scales. Aqueous solutions facilitate a plentiful metal ion supply for practical industrial applications, which may require continued reliable writing of sophisticated patterns. A thin aqueous layer on a surface helps to confine the writing on the surface. For this demonstration, liquid sample holder (K-kit) for transmission electron microscope (TEM) was employed to form a sealed space in a TEM. The aqueous CuSO4 solution inside the sample holder was allowed to partially dry until a uniform thin layer was left on the surface. The electron beam thus reduced Cu ions in the solution to form the desired patterns. Furthermore, the influence of e-beam exposure time and CuSO4(aq) concentration on the Cu reduction was studied in this work. Two growth stages of Cu were shown in the plot of Cu thickness versus e-beam exposure time. The measured Cu reduction rate was found to be proportional to the CuSO4(aq) concentration.