Novel method for visualizing water transport through phase-separated polymer films

Convolutional neural networks for segmentation of FIB-SEM nanotomography data from porous polymer films for controlled drug release

Phase-separated polymer films are commonly used as coatings around pharmaceutical oral dosage forms (tablets or pellets) to facilitate controlled drug release. A typical choice is to use ethyl cellulose and hydroxypropyl cellulose (EC/HPC) polymer blends. When an EC/HPC film is in contact with water, the leaching out of the water-soluble HPC phase produces an EC film with a porous network through which the drug is transported. The drug release can be tailored by controlling the structure of this porous network. Imaging and characterization of such EC porous films facilitates understanding of how to control and tailor film formation and ultimately drug release. Combined focused ion beam and scanning electron microscope (FIB-SEM) tomography is a well-established technique for high-resolution imaging, and suitable for this application. However, for segmenting image data, in this case to correctly identify the porous network, FIB-SEM is a challenging technique to work with. In this work, we implement convolutional neural networks for segmentation of FIB-SEM image data. The data are acquired from three EC porous films where the HPC phases have been leached out. The three data sets have varying porosities in a range of interest for controlled drug release applications. We demonstrate very good agreement with manual segmentations. In particular, we demonstrate an improvement in comparison to previous work on the same data sets that utilized a random forest classifier trained on Gaussian scale-space features. Finally, we facilitate further development of FIB-SEM segmentation methods by making the data and software used open access.

New Characterization Measures of Pore Shape and Connectivity Applied to Coatings used for Controlled Drug Release

Pore geometry characterization-methods are important tools for understanding how pore structure influences properties such as transport through a porous material. Bottlenecks can have a large influence on transport and related properties. However, existing methods only catch certain types of bottleneck effects caused by variations in pore size. We here introduce a new measure, geodesic channel strength, which captures a different type of bottleneck effect caused by many paths coinciding in the same pore. We further develop new variants of pore size measures and propose a new way of visualizing 3-D characterization results using layered images. The new measures together with existing measures were used to characterize and visualize properties of 3-D FIB-SEM images of three leached ethyl-cellulose/hydroxypropyl-cellulose films. All films were shown to be anisotropic, and the strongest anisotropy was found in the film with lowest porosity. This film had very tortuous paths and strong geodesic channel-bottlenecks, while the paths through the other two films were relatively straight with well-connected pore networks. The geodesic channel strength was shown to give important new visual and quantitative insights about connectivity, and the new pore size measures provided useful information about anisotropies and inhomogeneities in the pore structures. The methods have been implemented in the freely available software MIST.

Three-dimensional reconstruction of porous polymer films from FIB-SEM nanotomography data using random forests

Combined focused ion beam and scanning electron microscope (FIB-SEM) tomography is a well-established technique for high resolution imaging and reconstruction of the microstructure of a wide range of materials. Segmentation of FIB-SEM data is complicated due to a number of factors; the most prominent is that for porous materials, the scanning electron microscope image slices contain information not only from the planar cross-section of the material but also from underlying, exposed subsurface pores. In this work, we develop a segmentation method for FIB-SEM data from ethyl cellulose porous films made from ethyl cellulose and hydroxypropyl cellulose (EC/HPC) polymer blends. These materials are used for coating pharmaceutical oral dosage forms (tablets or pellets) to control drug release. We study three samples of ethyl cellulose and hydroxypropyl cellulose with different volume fractions where the hydroxypropyl cellulose phase has been leached out, resulting in a porous material. The data are segmented using scale-space features and a random forest classifier. We demonstrate good agreement with manual segmentations. The method enables quantitative characterization and subsequent optimization of material structure for controlled release applications. Although the methodology is demonstrated on porous polymer films, it is applicable to other soft porous materials imaged by FIB-SEM. We make the data and software used publicly available to facilitate further development of FIB-SEM segmentation methods. LAY DESCRIPTION: For imaging of very fine structures in materials, the resolution limits of, e.g. X-ray computed tomography quickly become a bottleneck. Scanning electron microscopy (SEM) provides a way out, but it is essentially a two-dimensional imaging technique. One manner in which to extend it to three dimensions is to use a focused ion beam (FIB) combined with a scanning electron microscopy and acquire tomography data. In FIB-SEM tomography, ions are used to perform serial sectioning and the electron beam is used to image the cross section surface. This is a well-established method for a wide range of materials. However, image analysis of FIB-SEM data is complicated for a variety of reasons, in particular for porous media. In this work, we analyse FIB-SEM data from ethyl cellulose porous films made from ethyl cellulose and hydroxypropyl cellulose (EC/HPC) polymer blends. These films are used as coatings for controlled drug release. The aim is to perform image segmentation, i.e. to identify which parts of the image data constitute the pores and the solid, respectively. Manual segmentation, i.e. when a trained operator manually identifies areas constituting pores and solid, is too time-consuming to do in full for our very large data sets. However, by performing manual segmentation on a set of small, random regions of the data, we can train a machine learning algorithm to perform automatic segmentation on the entire data sets. The method yields good agreement with the manual segmentations and yields porosities of the entire data sets in very good agreement with expected values. The method facilitates understanding and quantitative characterization of the geometrical structure of the materials, and ultimately understanding of how to tailor the drug release.

Real time MRI to elucidate the functionality of coating films intended for modified release

Polymer films based on mixtures of ethyl cellulose (EC) and hydroxypropyl cellulose (HPC) have been widely used to coat pellets and tablets to modify the release profile of drugs. For three different EC/HPC films we used ¹H and ¹⁹F MRI in combination with a designed release cell to monitor the drug, polymer and water in 5 dimensional (5D) datasets; three spatial, one diffusion or relaxation and a temporal dimension, in real time. We observed that the water inflow through the films correlated with the initiation of the dissolution of the drug in the tablet beneath the film. Leaching of the pore forming HPC further accelerated water penetration and resulted in a drug release onset after a hydrostatic pressure was generated below the film indicated by positional changes of the film. For the more permeable film, both water ingress and drug egress showed a large variability of release over the film surface indicating the heterogeneity of the system. Furthermore, the ¹H diffusion dataset revealed the formation of a gel layer of HPC at the film surface. We conclude that the setup presented provides a significant level of details, which are not achieved with traditional methods.