Accounting for variability among individual pigs in deterministic growth models

Feeding Strategies to Reduce Nutrient Losses and Improve the Sustainability of Growing Pigs

The efficiency of pig production using nutrients has increased over the years. Still, better efficiency of nutrient utilization can be achieved by feeding pigs with diets adjusted to their estimated requirements. An increase in nutrient efficiency of utilization represents economic gains while maximizing environmental performance. The objective of this paper is to review the impact of different methods of diet formulation that provide farm animals with the amount of nutrients to satisfy their needs while minimizing nutrient excretion and greenhouse gas emissions. Diet formulation is one tool that can help to maximize nitrogen and energy utilization by decreasing crude protein content in diets. The use of local feedstuff and non-human-edible products (e.g., canola meal) associated with synthetic amino acid inclusion in the diet are valuable techniques to reduce carbon footprint. Precision feeding and nutrition is another powerful tool that allows not only daily tailoring of diets for maximal nutrient efficiency of utilization but also to reduce costs and improve nitrogen efficiency of utilization. In this review, we simulated through mathematical models the nitrogen and energy efficiency of utilization resulting from crude protein reduction in the diet. An 8% crude protein reduction in the diet can increase nitrogen efficiency of utilization by 54% while costing 11% less than a control diet without synthetic amino acids. The same reduction in crude protein represented a major improvement in available energy due to the decrease of energetic losses linked to protein deamination. Urinary and hindgut fermentation energy losses were 24% lower for pigs fed with low-protein diets when compared to control diets. In terms of modern feeding techniques and strategies, precision feeding and nutrition can decrease nitrogen excretion by 30% when compared to group phase feeding. The benefits of feeding pigs with low-protein diets and precision feeding techniques are additive and might result in a 61% nitrogen efficiency of utilization. There is room for improvement in the way nutrient requirements are estimated in pigs. Improving the understanding of the variation of nutrient utilization among pigs can contribute to further environmental gains.

Precision livestock farming: real-time estimation of daily protein deposition in growing-finishing pigs

Precision feeding using real-time models to estimate daily tailored diets can potentially increase nutrient utilization efficiency. However, to improve the estimation of amino acid requirements for growing-finishing pigs, it is necessary to accurately estimate the real-time body protein (BP) mass. The aim of this study was to predict individual BP over time in order to obtain individual daily protein content of the gain (i.e., protein deposition/daily gain, PD/DG) to be integrated into a real-time model used for precision feeding. Two databases were used in this study: one for the development of the equations for the model and the other for model evaluation. For the equations, data from 79 barrows (25 to 144 kg BW) were used to estimate the parameters for a Gompertz function and a mixed linear-quadratic regression. Individual BP predictions obtained by dual X-ray absorptiometry were regressed as a function of BW. Individual pig BP estimates were obtained by linear-quadratic regression using the MIXED procedure of SAS, considering pig measurements repeated in time. Individual Gompertz curves were obtained using the NLMIXED procedure of SAS. Both procedures generate an average or a general model, which was assessed for accuracy with the database used to generate the equations. Coefficients of concordance and determination were both 0.99, and the RMSE was 0.21 kg for the linear-quadratic regression. The Gompertz curve coefficients of concordance and determination were both 0.99, and the RMSE was 0.36 kg. In sequence, the linear-quadratic regression and Gompertz curve were evaluated in an independent data set (488 observations; 21 to 126 kg BW). The linear-quadratic regression to predict BP mass was accurate (mean absolute percentage error (MAPE) = 2.5%; bias = 0.03); the Gompertz model performed worse (MAPE = 3.9%; bias = 0.04) than the linear-quadratic regression. When using the derivative of these equations to predict PD/DG, the linear-quadratic regression was more accurate (MAPE = 4.8%, bias = 0.17%) compared to the Gompertz (MAPE = 10.6%, bias = -0.99%) mainly due to the linear decrease in PD/DG in the observed data. Further analysis using individual pig data showed that the goodness of fit of PD/DG curve depends on the individual shape of the growth curve, with either the Gompertz or the linear-quadratic regression being more accurate for specific individuals. Therefore, both approaches are provided to allow end users to select the model that best fits their needs. The proposed update of the empirical component of the original model, using either linear-quadratic regression or the Gompertz function, is able to predict BP in real-time with good accuracy.

Effects of interactions between feeding practices, animal health and farm infrastructure on technical, economic and environmental performances of a pig-fattening unit

European pig production faces economic and environmental challenges. Modelling can help farmers simulate and understand how changes in their management practices affect the efficiency of their production system. We developed an individual-based model of a pig-fattening unit that considers individual variability in performance among pigs, farmers' feeding practices and animal management and estimates environmental impacts (using life cycle assessment) and economic results of the unit. We previously demonstrated that this model provides reliable estimates of farm performance for different combinations of management practices, pig types and building characteristics. The objectives of this study were to quantify how interactions between feeding practices and animal management influence fattening unit results in healthy or impaired health conditions using the model. A virtual experiment was designed to evaluate effects of interactions between feeding practices, health status of the pig herd and infrastructure constraints on the technical performance, economic results and environmental impacts of the unit. The virtual experiment consisted of 96 scenarios, which combined chosen values of 6 input parameters of the model: batch interval (35 days and 7 days), use or non-use of a buffer room to manage the lightest pigs, feed rationing (ad libitum and restricted) and sequence plans (two-phase (2P), daily-phase (DP)), scale at which the feeding plan is applied (i.e. room, pen and individual) and health status of the pig herd (i.e. healthy v. impaired). Variance analysis was used to test effects of the factors in these 96 scenarios, and multivariate data analyses were used to classify the scenarios. Healthy populations obtained on average higher economic results (e.g. gross margin of 11.20 v. 1.50 €/pig) and lower environmental impacts (e.g. 2.24 v. 2.38 kg CO2-eq/kg pig live weight gain) than the population with impaired health. With 35 days batch interval and DP feeding, populations with impaired health reached gross margin similar to healthy populations with 2P ad libitum feeding and 7 days batch interval. Restricted, DP and individual feeding plans improved the economic and environmental performances of the unit for both health statuses. This study highlighted that health status of the pig herd is the main factor that affects technical, economic and environmental performances of a pig-fattening unit, and that adequate feeding strategies and animal management can compensate, to some extent, the effects of impaired health on environmental impacts but not on gross margin.

Lipid Deposition and Metabolism in Local and Modern Pig Breeds: A Review

Modern pig breeds, which have been genetically improved to achieve fast growth and a lean meat deposition, differ from local pig breeds with respect to fat deposition, fat specific metabolic characteristics and various other properties. The present review aimed to elucidate the mechanisms underlying the differences between fatty local and modern lean pig breeds in adipose tissue deposition and lipid metabolism, taking into consideration morphological, cellular, biochemical, transcriptomic and proteomic perspectives. Compared to modern breeds, local pig breeds accumulate larger amounts of fat, which generally contains more monounsaturated and saturated fatty acids; they exhibit a higher adipocyte size and higher activity of lipogenic enzymes. Studies using transcriptomic and proteomic approaches highlighted several processes like immune response, fatty-acid turn-over, oxidoreductase activity, mitochondrial function, etc. which differ between local and modern pig breeds.

Modelling Nutritional Requirements of Growing Pigs from Local Breeds Using InraPorc

Models such as InraPorc enable the growth of pigs to be simulated and their nutrient requirements to be determined. However, so far, these models have not been applied to local breeds. We used InraPorc to determine the nutrient requirements of growing pigs from local breeds (H2020 European Union project TREASURE). Data on feed composition, allowance and intake, and body weight (BW) were obtained from literature reports or experiments conducted within the project. Data were used in InraPorc to calibrate 16 growth and intake profiles from nine breeds (Alentejana, Basque, Bísara, Apulo Calabrese, Cinta Senese, Iberian, Krškopolje pig, Mangalitsa, and Moravka), with one to three profiles per breed depending on the experimental conditions or data source. On the 40-100 kg BW range, mean protein deposition (PDm) was low for all breeds (below 116 g/d vs. over 130 g/d in conventional breeds). The age of pigs at 40 kg BW (110 to 206 days) denoted different types of feeding management in addition to genetic differences. The PDm and the lysine requirements were the highest in breeds with the highest average daily gain. In all breeds, a small proportion of total body energy retention was dedicated to protein, with the greatest proportion of energy retention in the form of lipids. Despite some methodological limitations, this study provides initial insights into the nutrient requirements of some local breeds.

Modelling interactions between farmer practices and fattening pig performances with an individual-based model

European pig production continues to encounter economic and environmental challenges. To address these issues, methods have been developed to assess performances of pig production systems. Recent studies indicate that considering variability in performances among pigs improves the accuracy and reliability of results compared with modelling an average animal. Our objective was to develop a pig fattening unit model able to (i) simulate individual pig performances, including their variability in interaction with farmers' practices and management, and (ii) assess their effects on technical, economic and environmental performances. Farmer practices included in the model were chosen from a typology generated from on-farm surveys focused on batch management, pig allocation to pens, pig feeding practices, practices of shipping to the slaughterhouse, and management of the remaining pigs. Pigs are represented using an individual-based model adapted from the InraPorc® model. To illustrate the model's abilities, four scenarios were simulated that combine two feed rationing plans (ad libitum, restricted to 2.5 kg/day) and two feed sequence plans (two-phase, 10-phase). Analysis of variance was performed on the simulated technical, economic and environmental indicators (calculated via Life Cycle Assessment). The feed rationing plan and feed sequence plan significantly affected all indicators except for the premium per pig, for which the feed sequence plan did not have a significant effect. The 'restricted 10-phase' scenario maximised gross margin of the fattening unit (14.2 €/pig) and minimised environmental impacts per kg of pig produced. In contrast, the 'ad libitum two-phase' scenario generated the lowest margin (8.20 €/pig) and the highest environmental impacts. The model appears to be a promising tool to assess effects of farmers' practices, pig characteristics and farm infrastructure on technical, economic and environmental performances of the fattening unit, and to investigate the potential of improvement. However, further work is needed, based on virtual experiments, in order to evaluate the effects of a larger diversity of practices.

Effect of feeding strategy on environmental impacts of pig fattening in different contexts of production: evaluation through life cycle assessment

Life cycle assessment (LCA) has been used in many studies to evaluate the effect of feeding strategy on the environmental impact of pig production. However, because most studies have been conducted in European conditions, the question of possible interactions with the context of production is still under debate. The objective of this study was to evaluate these effects in 2 contrasted geographic contexts of production, South America (Brazil) and Europe (France). The LCA considered the process of pig fattening, including production and transport of feed ingredients and feed, raising of fattening pigs, and manure storage, transport, and spreading. Impacts were calculated at the farm gate, and the functional unit considered was 1 kg of BW gain over the fattening period. The performances of pigs were simulated for each scenario using the InraPorc population model (2,000 pigs per scenario considering between-animal variability). The LCA calculations were performed for each pig according to its own performance and excretion, and the results were subjected to variance analysis. The results indicate that for some impacts there are clear interactions between the effects of the feeding program, the origin of soybean, and the location of production. For climate change, interest in phase feeding and incorporation of crystalline AA (CAA) is limited and even counterproductive in Brazil with soybeans from the South (without deforestation), whereas they appear to be efficient strategies with soybeans from the Center West (with deforestation), especially in France. Rather similar effects, as those for climate change, were observed for cumulative energy demand. Conversely, potential eutrophication and acidification impacts were reduced by phase feeding and CAA addition in a rather similar way in all situations. Individual daily feeding, the only strategy that took into account between-animal variability, was the most effective approach for reducing the life cycle impact of pig fattening in all situations, whereas the potential of phase feeding programs and CAA was dependent on soybean origin and the geographical context of pig production, in contrast with previous results.

Genetic modeling of feed intake

With the development of automatic self-feeders and electronic identification, automated, repeated measurements of individual feed intake (FI) and BW are becoming available in more species. Consequently, genetic models for longitudinal data need to be applied to study FI or related traits. To handle this type of data, several flexible mixed-model approaches exist such as character process (CPr), structured antedependence (SAD), or random regression (RR) models. The objective of this study was to compare how these different approaches estimate both the covariance structure between successive measurements of FI and genetic parameters and their ability to predict future performances in 3 species (rabbits, ducks, and pigs). Results were consistent between species. It was found that the SAD and CPr models fit the data better than the RR models. Estimations of genetic and phenotypic correlation matrices were quite consistent between SAD and CPr models, whereas correlations estimated with the RR model were not. Structured antedependence and CPr models provided, as expected and in accordance with previous studies, a decrease of the correlations with the time interval between measurements. The changes in heritability with time showed the same trend for the SAD and RR models but not for the CPr model. Our results show that, in comparison with the CPr model, the SAD and RR models have the advantage of providing stable predictions of future phenotypes 1 wk forward whatever the number of observations used to estimate the parameters. Therefore, to study repeated measurements of FI, the SAD approach seems to be very appropriate in terms of genetic selection and real-time managements of animals.

Phenotypic and genetic relationships between growth and feed intake curves and feed efficiency and amino acid requirements in the growing pig

Improvement of feed efficiency in pigs has been achieved essentially by increasing lean growth rate, which resulted in lower feed intake (FI). The objective was to evaluate the impact of strategies for improving feed efficiency on the dynamics of FI and growth in growing pigs to revisit nutrient recommendations and strategies for feed efficiency improvement. In 2010, three BWs, at 35±2, 63±9 and 107±7 kg, and daily FI during this period were recorded in three French test stations on 379 Large White and 327 French Landrace from maternal pig populations and 215 Large White from a sire population. Individual growth and FI model parameters were obtained with the InraPorc® software and individual nutrient requirements were computed. The model parameters were explored according to feed efficiency as measured by residual feed intake (RFI) or feed conversion ratio (FCR). Animals were separated in groups of better feed efficiency (RFI- or FCR-), medium feed efficiency and poor feed efficiency. Second, genetic relationships between feed efficiency and model parameters were estimated. Despite similar average daily gains (ADG) during the test for all RFI groups, RFI- pigs had a lower initial growth rate and a higher final growth rate compared with other pigs. The same initial growth rate was found for all FCR groups, but FCR- pigs had significantly higher final growth rates than other pigs, resulting in significantly different ADG. Dynamic of FI also differed between RFI or FCR groups. The calculated digestible lysine requirements, expressed in g/MJ net energy (NE), showed the same trends for RFI or FCR groups: the average requirements for the 25% most efficient animals were 13% higher than that of the 25% least efficient animals during the whole test, reaching 0.90 to 0.95 g/MJ NE at the beginning of the test, which is slightly greater than usual feed recommendations for growing pigs. Model parameters were moderately heritable (0.30±0.13 to 0.56±0.13), except for the precocity of growth (0.06±0.08). The parameter representing the quantity of feed at 50 kg BW showed a relatively high genetic correlation with RFI (0.49±0.14), and average protein deposition between 35 and 110 kg had the highest correlation with FCR (-0.76±0.08). Thus, growth and FI dynamics may be envisaged as breeding tools to improve feed efficiency. Furthermore, improvement of feed efficiency should be envisaged jointly with new feeding strategies.

The impact of feeding growing-finishing pigs with daily tailored diets using precision feeding techniques on animal performance, nutrient utilization, and body and carcass composition

The impact of moving from conventional to precision feeding systems in growing-finishing pig operations on animal performance, nutrient utilization, and body and carcass composition was studied. Fifteen animals per treatment for a total of 60 pigs of 41.2 (SE = 0.5) kg of BW were used in a performance trial (84 d) with 4 treatments: a 3-phase (3P) feeding program obtained by blending fixed proportions of feeds A (high nutrient density) and B (low nutrient density); a 3-phase commercial (COM) feeding program; and 2 daily-phase feeding programs in which the blended proportions of feeds A and B were adjusted daily to meet the estimated nutritional requirements of the group (multiphase-group feeding, MPG) or of each pig individually (multiphase-individual feeding, MPI). Daily feed intake was recorded each day and pigs were weighed weekly during the trial. Body composition was assessed at the beginning of the trial and every 28 d by dual-energy X-ray densitometry. Nitrogen and phosphorus excretion was estimated as the difference between retention and intake. Organ, carcass, and primal cut measurements were taken after slaughter. The COM feeding program reduced (P < 0.05) ADFI and improved G:F rate in relation to other treatments. The MPG and MPI programs showed values for ADFI, ADG, G:F, final BW, and nitrogen and phosphorus retention that were similar to those obtained for the 3P feeding program. However, compared with the 3P treatment, the MPI feeding program reduced the standardized ileal digestible lysine intake by 27%, the estimated nitrogen excretion by 22%, and the estimated phosphorus excretion by 27% (P < 0.05). Organs, carcass, and primal cut weights did not differ among treatments. Feeding growing-finishing pigs with daily tailored diets using precision feeding techniques is an effective approach to reduce nutrient excretion without compromising pig performance or carcass composition.