Industrial hygiene chemistry: keeping pace with rapid change in the workplace

Multiplexed paper analytical device for quantification of metals using distance-based detection

Exposure to metal-containing aerosols has been linked with adverse health outcomes for almost every organ in the human body. Commercially available techniques for quantifying particulate metals are time-intensive, laborious, and expensive; often sample analysis exceeds $100. We report a simple technique, based upon a distance-based detection motif, for quantifying metal concentrations of Ni, Cu, and Fe in airborne particulate matter using microfluidic paper-based analytical devices. Paper substrates are used to create sensors that are self-contained, self-timing, and require only a drop of sample for operation. Unlike other colorimetric approaches in paper microfluidics that rely on optical instrumentation for analysis, with distance-based detection, analyte is quantified visually based on the distance of a colorimetric reaction, similar to reading temperature on a thermometer. To demonstrate the effectiveness of this approach, Ni, Cu, and Fe were measured individually in single-channel devices; detection limits as low as 0.1, 0.1, and 0.05 μg were reported for Ni, Cu, and Fe. Multiplexed analysis of all three metals was achieved with detection limits of 1, 5, and 1 μg for Ni, Cu, and Fe. We also extended the dynamic range for multi-analyte detection by printing concentration gradients of colorimetric reagents using an off-the-shelf inkjet printer. Analyte selectivity was demonstrated for common interferences. To demonstrate utility of the method, Ni, Cu, and Fe were measured from samples of certified welding fume; levels measured with paper sensors matched known values determined gravimetrically.

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.

Adaptation and evaluation of a personal electronic nose for selective multivapor analysis

The evaluation of a commercial, belt-mountable "electronic nose" modified for the rapid recognition and quantification of individual solvent vapors and simple vapor mixtures at low ppm concentrations is described. Marketed under the name VaporLab this direct-reading instrument was designed for qualitative determinations of the presence or absence of selected individual vapors and was adapted in this study for quantitative determinations of vapors and vapor-mixture components. Vapor samples are concentrated on a small adsorbent bed and then thermally desorbed for analysis by an array of four polymer-coated surface acoustic wave sensors. Tests were performed with 13 organic solvent vapors individually and in selected binary, ternary, and quaternary mixtures at concentrations ranging from 0.1 to 12 times the respective American Conference of Governmental Industrial Hygienists' (ACGIH) threshold limit value (TLV). Pattern recognition analyses yielded a library of response patterns to which subsequent actual and virtual (i.e., Monte-Carlo simulated) samples were compared to assess performance. Limits of detection >0.025 x TLV are achieved (based on the most sensitive sensors) for 0.25 L of preconcentrated air samples collected over a 2-min period. Individual vapors from different functional group classes can be recognized, quantified, and discriminated from other vapors with little error, and discrimination of the components of binary mixtures is possible where the component vapor response patterns are sufficiently different. Within-class individual vapor and binary-mixture discriminations are more difficult and most ternary and higher-order mixtures could not be analyzed with acceptable accuracy. Changes in ambient humidity have no effect on responses and changes in temperature lead to well-behaved and compensable changes in responses. Tests of fluctuating concentrations demonstrate the capability for accurately tracking short-term variations in exposure. Overall, results suggest that this instrument could serve effectively as a personal exposure monitor in previously characterized occupational environments with proper revisions in design.

Developments in electrochemical sensors for occupational and environmental health applications

This paper provides an overview of recent advances in electrochemical sensors for industrial hygiene monitoring applications. Currently available instrument technologies as well as new devices under development are both exemplified. Progress in ruggedization and miniaturization of electroanalytical devices has led to significant improvements for on-site monitoring applications, e.g. in harsh environments and in biological monitoring. Sensor arrays and modified electrodes offer considerable promise for improved electrochemical sensing, i.e. through multi-species detection and enhanced selectivity. On-site electroanalytical detection and measurement in the field may become more widely used for applications in occupational health monitoring.

Subnanoliter volume wall-jet cells combined with interdigitated microarray electrode and enzyme modified planar microelectrode

Miniaturized wall-jet type flow cells with an active volume of 0.042-15 nL were fabricated for use as highly sensitive electrochemical detectors for capillary electrophoresis/electrochemical detection and small on-line enzyme sensors. The cells consisted of three glass plates and a fused-silica capillary. Two of the plates had microfabricated flow channels and guide trenches for the capillary and working, reference, and counter electrodes. The other plate had a film electrode. When an interdigitated microarray electrode (total area, 66 microm x 64 microm; bandwidth and gap, 2 microm) was installed in the flow cell, the redox cycling enhanced the current at flow rates of less than 100 nL/min even though there were only eight pairs of microbands. A sharp dopamine peak enhanced by the redox cycling was observed when the cell was used for capillary electrophoresis. A square film electrode modified with glutamate oxidase and Os-poly(vinylpyridine) containing HRP was also installed in the flow cell and used to measure neurotransmitter release from cultured nerve cells. When the flow rate was relatively high, the response time of the modified electrode was comparable to that of a cylindrical carbon fiber electrode (33 microm o.d.) modified with the same enzyme and mediator. We observed a transient cathodic current response assigned to the glutamate release with the electrode in the flow cell in a suction mode measurement when we stimulated cultured nerve cells electrically with a dual microelectrode.