Molecularly imprinted fluorescent-shift receptors prepared with 2-(trifluoromethyl)acrylic acid

Fluorination effects on non-covalent binding forces: A rotational study on the 2-(trifluoromethyl)acrylic acid-water complex

This study explores the effects of the -CF3 group on non-covalent interactions through a comprehensive rotational investigation of the 2-(trifluoromethyl)acrylic acid-water complex. Employing Fourier transform microwave spectroscopy complemented by quantum chemical calculations, two isomers, i.e., s-cis and s-trans structures, have been observed in the pulsed jet. Based on relative intensity measurements, the s-cis to the s-trans population ratio was experimentally estimated to be ∼ 1:1.2. Subsequently, a comparison of the non-covalent interactions was carried out between the three similar complexes, acrylic acid-water, methacrylic acid-water, and 2-(trifluoromethyl)acrylic acid-water, offering quantitative insights into fluorination affecting the strength of the formed hydrogen bonds important, e.g., in molecular recognition.

Factors Affecting Preparation of Molecularly Imprinted Polymer and Methods on Finding Template-Monomer Interaction as the Key of Selective Properties of the Materials

Molecular imprinting is a technique for creating artificial recognition sites on polymer matrices that complement the template in terms of size, shape, and spatial arrangement of functional groups. The main advantage of Molecularly Imprinted Polymers (MIP) as the polymer for use with a molecular imprinting technique is that they have high selectivity and affinity for the target molecules used in the molding process. The components of a Molecularly Imprinted Polymer are template, functional monomer, cross-linker, solvent, and initiator. Many things determine the success of a Molecularly Imprinted Polymer, but the Molecularly Imprinted Polymer component and the interaction between template-monomers are the most critical factors. This review will discuss how to find the interaction between template and monomer in Molecularly Imprinted Polymer before polymerization and after polymerization and choose the suitable component for MIP development. Computer simulation, UV-Vis spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Proton-Nuclear Magnetic Resonance (¹H-NMR) are generally used to determine the type and strength of intermolecular interaction on pre-polymerization stage. In turn, Suspended State Saturation Transfer Difference High Resolution/Magic Angle Spinning (STD HR/MAS) NMR, Raman Spectroscopy, and Surface-Enhanced Raman Scattering (SERS) and Fluorescence Spectroscopy are used to detect chemical interaction after polymerization. Hydrogen bonding is the type of interaction that is becoming a focus to find on all methods as this interaction strongly contributes to the affinity of molecularly imprinted polymers (MIPs).

Molecularly imprinted fluorescent chemosensor synthesized using quinoline-modified-β-cyclodextrin as monomer for spermidine recognition

Preparation of imprinted fluorescent chemosensor using quinoline-modified-β-cyclodextrin as monomer for spermidine recognition.

A disposable evanescent wave fiber optic sensor coated with a molecularly imprinted polymer as a selective fluorescence probe

We have developed a disposable evanescent wave fiber optic sensor by coating a molecularly imprinted polymer (MIP) containing a fluorescent signaling group on a 4-cm long polystyrene optical waveguide. The MIP is composed of a naphthalimide-based fluorescent monomer, which shows fluorescence enhancement upon binding with carboxyl-containing molecules. The herbicide 2,4-dichlorophenoxyacetic acid and the mycotoxin citrinin were used as model analytes. The coating of the MIP was either performed ex-situ, by dip-coating the fiber with MIP particles synthesized beforehand, or in-situ by evanescent-wave photopolymerization on the fiber. The sensing element was interrogated with a fiber-coupled spectrofluorimeter. The fiber optic sensor detects targets in the low nM range and exhibits specific and selective recognition over structural analogs and non-related carboxyl-containing molecules. This technology can be extended to other carboxyl-containing analytes, and to a broader spectrum of targets using different fluorescent monomers.

Preparation and evaluation of a molecularly imprinted polymer for the selective recognition of testosterone--application to molecularly imprinted sorbent assays

Biomimetic testosterone receptors were synthesized via molecular imprinting for use as antibody mimics in immunoassays. As evaluated by radioligand binding assays, imprinted polymers prepared in acetonitrile were very specific for testosterone because the nonimprinted control polymers bound virtually no radiolabeled testosterone. The polymers present an appreciable affinity, with association constants of K(a) = 3.3 x 10(7) M(- 1) (high-affinity binding sites). The binding characteristics of the polymers were also evaluated in aqueous environment to study their viabilities as alternatives to antibodies in molecularly imprinted sorbent assays. Compared with the testosterone-specific antibodies present in commercial kits, our molecularly imprinted polymers are somewhat less sensitive but show a high selectivity.

Imprinted polymers for chiral resolution of (+/-)-ephedrine. Part 3: NMR predictions and HPLC results with alternative functional monomers

The monomers trifluoromethacrylic acid (TFMAA), 2-hydroxyethylmethacrylate (HEMA) and itaconic acid (IA) have been compared for the molecular imprinting of (-)-ephedrine. Data from NMR titrations were fitted using the program HypNMR to obtain association constants for monomer-template (M-T) complexes of different stoichiometries. These were used to predict the speciation in imprinting mixtures with porogen and cross-linker, and molecularly imprinted polymers (MIPs) were fabricated and their ability to bind (-)-ephedrine and its enantiomer were assessed by high performance liquid chromatography (HPLC). TFMAA and IA interact more strongly with ephedrine than does MAA, yet MIPs made with each of these monomers perform worse. With TFMAA, covalent monomer-template adducts and TFMAA oligomers, present in the polymerisation mixture, may detract from the MIP recognition properties. With IA, the relative flexibility of the monomer may be an issue. HEMA interacts more weakly with ephedrine, and HEMA-based MIPs exhibit much worse retention, and poorer recognition, than those based on MAA. It may be useful to use a higher ratio of M : T in the case of HEMA because the monomer interacts with the cross-linker EDMA.

Molecularly imprinted polymers in clinical diagnostics—Future potential and existing problems

The last five years have witnessed a fast progress in the area of molecularly imprinted polymers (MIPs). These have included the development of rational protocols for polymer design (combinatorial and computational), the development of MIPs compatible for use in aqueous environment and the development of various procedures for the integration of MIPs with sensors. The substantial improvements in the performance of imprinted polymers have also been accompanied by a growing number of MIP publications related to solving practical problems associated with their use, e.g. in environmental and clinical analysis. This paper furnishes a detailed analysis of recent achievements in MIPs design and applications related to healthcare, made by our group as well as others worldwide.

Molecularly-imprinted polymeric logic gates selective for predetermined chemical input species

Selective AND and OR logic gates were fabricated by molecular imprinting with simultaneous use of two kinds of template species, with the resultant binding behaviour (AND or OR) of the imprinted polymers governed by intermolecular interactions between the two template species.

Use of fluorescence shift and fluorescence anisotropy to evaluate the re-binding of template to (S)-propranolol imprinted polymers

The binding of (R)- and (S)-propranolol to an (S)-propranolol imprinted polymer in organic and aqueous solutions has been studied using fluorescence. The amount of propranolol that binds can be measured by separating non-bound propranolol from the polymer by centrifugation, and measuring the fluorescence intensity. However, this work demonstrates that other measurements can indicate how much propranolol has bound without the need to separate bound and non-bound analyte. In toluene + 0.5% AcOH, and in aqueous buffer (25 mM citrate pH 6 + 0.5% Triton X100) the fluorescence anisotropy increases as the fraction of analyte bound to the polymer increases. In aqueous buffer, binding to the polymer is also accompanied by a change in the relative intensities of fluorescence at 322 nm and at 352 nm. These non-separation techniques have been used to show that the imprinted polymer binds more (S)-propranolol than a non-imprinted polymer, and at least in organic solvent, shows selectivity for (S)- over (R)-propranolol.

Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003

Over 1450 references to original papers, reviews and monographs have herein been collected to document the development of molecular imprinting science and technology from the serendipitous discovery of Polyakov in 1931 to recent attempts to implement and understand the principles underlying the technique and its use in a range of application areas. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by papers dealing with fundamental aspects of molecular imprinting and the development of novel polymer formats. Thereafter, literature describing attempts to apply these polymeric materials to a range of application areas is presented.

Optical interrogation of molecularly imprinted polymers and development of MIP sensors: a review

This article reviews the progress and developments achieved in the past five years (2000-2005) in the application of optical analytical techniques to the evaluation of molecularly imprinted polymer (MIP) characteristics. The MIP binding efficiency, recognition processes and selectivity have been intensively studied by optical means due to the general high sensitivity and simplicity of the utilisation of optical techniques. In addition, recent progress in the covalent linkage of MIPs to optical transducers has allowed for the realisation of highly efficient and robust optical MIP-based molecular recognition sensors. The review provides insight into the various approaches to the optical interrogation of MIPs, and is organised according to the type of optical technique employed (fluorescence, UV/Vis and infrared spectroscopy, surface plasmon resonance, chemiluminescence, refractive interference spectroscopy and Raman scattering) and the detailed strategies applied. The review also covers the recent progress achieved in the area of optical sensors based on MIPs.

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.