An alternative procedure to screen mixture combinatorial libraries for selectors for chiral chromatography

The Reciprocal Principle of Selectand-Selector-Systems in Supramolecular Chromatography †

In selective chromatography and electromigration methods, supramolecular recognition of selectands and selectors is due to the fast and reversible formation of association complexes governed by thermodynamics. Whereas the selectand molecules to be separated are always present in the mobile phase, the selector employed for the separation of the selectands is either part of the stationary phase or is added to the mobile phase. By the reciprocal principle, the roles of selector and selectand can be reversed. In this contribution in honor of Professor Stig Allenmark, the evolution of the reciprocal principle in chromatography is reviewed and its advantages and limitations are outlined. Various reciprocal scenarios, including library approaches, are discussed in efforts to optimize selectivity in separation science.

Recent developments in the HPLC enantiomeric separation using chiral selectors identified by a combinatorial strategy

Two kinds of chiral stationary phases (CSPs) can be distinguished: (i) the "conventional" CSPs for which the selectivity is not pre-determined and (ii) the CSPs which are characterized by a predictable elution order, depending on the target enantiomer used for the selection of the chiral selector. At the present time, three general methodologies have been described to create chiral selectors specifically designed against the racemate to resolve: the molecular imprinting technology, the production of antibodies and the combinatorial approach. The latter methodology involves two categories of procedures to develop CSPs: an approach from a small library of low-molecular weight selectors and an approach from a very large library of single-stranded oligonucleotides (DNA and RNA aptamers). In this review, the recent advances in the HPLC applications of the chiral selectors identified through these two combinatorial procedures are addressed.

Chiral Templating of Surfaces: Adsorption of (S)-2-Methylbutanoic Acid on Pt(111) Single-Crystal Surfaces

The adsorption and thermal chemistry of (S)-(+)-2-methylbutanoic acid ((S)-2MBA) on Pt(111) single-crystal surfaces was characterized by using temperature programmed desorption (TPD) and reflection-adsorption infrared (RAIRS) spectroscopies. Particular emphasis was placed on the characterization of the chiral superstructures formed upon the deposition of the submonolayer coverages of enantiopure (S)-2-methylbutanoate species that are produced by thermal dehydrogenation of the (S)-2MBA. The enantioselectivity of the empty platinum sites left open on those structures were identified by their difference in behavior toward the adsorption of the two enantiomers of propylene oxide. It was found that a significant enhancement in adsorption is possible on surfaces with the same chirality of the probe molecule, specifically that the uptake of (S)-propylene oxide is larger than that of (R)-propylene oxide on (S)-2-methylbutanoate adsorbed layers. This contrasts with the lack of enantioselectivity previously reported for the same adsorbate on Pd(111). Detectable differences in adsorption energetics of (R)- vs (S)-propylene oxide on the (S)-2-methylbutanoate/Pt(111) overlayers were measured but deemed not to be the controlling factor in the enantioselectivity reported in this system.

A screening method for chiral selectors that does not require covalent attachment

A high-throughput screening protocol is proposed for chiral selector discovery. It is modeled after the protocol for biological screening of candidate drugs from chemical libraries. The procedure works based on target distribution between an aqueous phase and an organic phase. The target may be a racemate or separate enantiomers. Screening for noncovalent intermolecular association between target and candidate selectors is carried out by partitioning experiments in the presence and absence of the candidate chiral selectors in the organic phase (plasticized poly(vinyl chloride)). The partition ratio measurement uses 96-well plates for high throughput. The feasibility of this approach is validated by working with a known target/chiral selector pair, N-(3,5-dinitrobenzoyl)-alpha-phenylglycine and 2,2,2-trifluoro-1-(9-anthryl)ethanol. The validated protocol is applied to a small library of 12 cyclopropyl dipeptide isosteres. Eight bind the racemic target, econazole. Among them, one has measurable chiral selectivity. The advantage of the method is that it does not require the covalent attachment of either the analyte or the selector, and the required amount of the potential chiral selector is about 100 mug.

Tertiary Amine Appended Derivatives of N-(3,5-Dinitrobenzoyl)leucine as Chiral Selectors for Enantiomer Assays by Electrospray Ionization Mass Spectrometry

Derivatives of the chiral selector N-(3,5-dinitrobenzoyl)leucine were prepared and used as chiral selectors for enantiomer discrimination in single-stage electrospray ionization mass spectrometric experiments. The chiral selectors were designed to remove the ionization site from the sites required for effective chiral recognition. Addition of a chiral analyte to a solution of the two pseudoenantiomeric chiral selectors, which differ in absolute stereochemistry and the length of the tether connecting the tertiary amine site used for ionization via protonation and the rest of the chiral selector, affords selector-analyte complexes in the electrospray ionization mass spectrum where the ratio of these complexes is dependent on the enantiomeric composition of the analyte. The relationship between the ratio of the selector-analyte complexes in the electrospray ionization mass spectrum and the enantiomeric composition of the analyte can be used to relate the extent of enantioselectivity that is being observed and for quantitative enantiomeric composition determinations. Investigations into the scope and limitations of this method, plus a comparison to the enantioselectivities observed by chiral HPLC using a N-(3,5-dinitrobenzoyl)leucine-derived chiral stationary phase, is presented.

Determination of enantiomeric composition by negative-ion electrospray ionization-mass spectrometry using deprotonatedN-(3,5-dinitrobenzoyl)amino acids as chiral selectors

The ability to use mixtures of deprotonated N-(3,5-dinitrobenzoyl)amino acids as chiral selectors for the determination of enantiomeric composition by electrospray ionization-mass spectrometry is demonstrated. For each experiment, two N-(3,5-dinitrobenzoyl)amino acids were chosen such that each would have opposite selectivity for the enantiomers of the analyte. Electrospray ionization-mass spectrometry, monitored in the negative ion mode, of solutions containing the two N-(3,5-dinitrobenzoyl)amino acids, sodium hydroxide, and the analyte, in a one-to-one mixture of methanol and water, afford peaks in the mass spectrum that correspond to the deprotonated 1:1 analyte-selector complexes. The ratio of the intensities of the complexes in the mass spectrum can be related to the enantiomeric composition of the analyte. Additionally, the sense and extent of chiral recognition is consistent with chromatographic observations, using chiral stationary phases derived from N-(3,5-dinitrobenzoyl)amino acids. Each analysis of enantiomeric composition requires less than 10 s to complete, indicating that this method has great potential for the development of fast-/high-throughput chiral analyses.

Efficient resolution of racemic 1,1′-bi-2-naphthol with chiral selectors identified from a small library

Efficient resolution of racemic 1,1'-bi-2-naphthol, a well-studied analyte in chiral separation, was achieved using selectors developed from a small library. Separation factors (up to 7.2) obtained are significantly higher than the ones reported previously for this analyte. The library consists of 121 members and it does not contain the pi deficient 3,5-dinitrobenzoyl (Dnb) group. These highly efficient stationary phases may lead to the practical large-scale chromatographic resolution of enantiomers of 1,1'-bi-2-naphthol, which are widely used as chiral auxiliaries and ligands in asymmetric synthesis.

Enantiorecognition on solid chiral selectors using microbatch technology: an example of limitation in case of strong association in the racemate

When they were independently tested, the enantiomers of N,N'-bis(salicylidene)-trans-1,2-cyclohexanediamine showed a large difference in adsorption on new chiral selectors using microbatch technology. Surprisingly, when these enantiomers were applied on the same supports as a racemic mixture, no discrimination was observed even though suitable adsorption existed. When a mixture enriched in one enantiomer (scalemic mixture) was applied, the resulting supernatant contained the racemic form and the enantiomer in excess was adsorbed on the support together with a part of racemate. This behavior, which militates in favor of a strong heterochiral dimer formation in the racemate, was revealed using microbatch technology but remained hidden on classical column chromatography on chiral support. Molecular dynamics calculations corroborate this hypothesis, showing a favorite binding mode of the heterochiral dimer, which is stabilized by various inter- and intramolecular interactions. Our findings may be considered as a new limitation of microbatch technology, but they may have some inference in case of chiral amplification using the N,N'-bis(salicylidene)-trans-1,2-cyclohexanediamine enantiomers as chiral ligands.

Chiral recognition: design and preparation of chiral stationary phases using selectors derived from ugi multicomponent condensation reactions and a combinatorial approach

Combinatorial approaches together with high-throughput screening have been used to develop highly selective stationary phases for chiral recognition. Libraries of potential chiral selectors have been prepared by the Ugi multicomponent condensation reactions and screened for their enantioselectivity using the reciprocal approach involving a chiral stationary phase with immobilized model target compound N-(3,5-dinitrobenzoyl)-alpha-l-leucine. The best candidates were identified from the library of phenyl amides of 2-oxo-azetidineacetic acid derivatives. This screening also enabled specification of the functionalities of the selector desired to achieve the highest level of chiral recognition. The substituents of the phenyl ring adjacent to the chiral center of the selector candidates exhibited the most profound effect on the chiral recognition. The best candidate was then synthesized on a larger scale, resolved into single enantiomers using preparative enantioselective HPLC, and attached to porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) beads via an ester linkage to afford the desired stationary phase. Selectivities alpha as high as 3.2 were found for the separation of a variety of amino acid derivatives.