A fluorogenic reagent, 4-mercapto-7-methylthio-2,1,3-benzoxadiazole for carboxylic acids, designed by prediction of the fluorescence intensity

Thio-conjugation of substituted benzofurazans to peptides: molecular sieves catalyze nucleophilic attack on unsaturated fused rings

An efficient procedure to selectively introduce benzofurazan moieties into peptides was developed. It employs zeolite to catalyze the S-conjugation reaction.

Synthesis of toluene-4-sulfonic acid 2-(2-thiophen-2-yl-phenanthro[9,10-d]imidazol-1-yl)-ethyl ester and its application for sensitive determination of free fatty acids in ginkgo nut and ginkgo leaf by high performance liquid chromatography with fluorescence detection

A highly sensitive HPLC-FL method to determine fatty acids was developed utilizing TSTPE as a novel fluorescent labeling reagent.

A quantitative assay for the juvenile hormones and their precursors using fluorescent tags

BACKGROUND

The juvenile hormones (JHs) are sesquiterpenoid compounds that play a central role in insect reproduction, development and behavior. The lipophilic nature of JHs and their precursors, in conjunction with their low concentration in tissues and susceptibility to degradation had made their quantification difficult. A variety of methods exist for JH quantification but few can quantify on the femtomole range. Currently applied methods are expensive and time consuming. In the present study we sought to develop a novel method for accurate detection and quantification of JHs and their precursors.

METHODS

A sensitive and robust method was developed to quantify the precursor, farnesoic acid (FA) and juvenile hormone III (JH III) in biological samples. The assay is based on the derivatization of analytes with fluorescent tags, with subsequent analysis by reverse phase high performance liquid chromatography coupled to a fluorescent detector (HPLC-FD). The carboxyl group of FA was derivatized with 4-Acetamido-7-mercapto-2,1,3-benzoxadiazole (AABD-SH). Tagging the epoxide group of JH III required a two-step reaction: the opening of the epoxide ring with sodium sulfide and derivatization with the fluorescent tag 4-(N,N-Dimethylaminosulfonyl)-7-(N-chloroformylmethyl-N-methylamino)-2,1,3-benzoxadiazole (DBD-COCl).

CONCLUSIONS

The method developed in the present study showed high sensitivity, accuracy and reproducibility. Linear responses were obtained over the range of 10-20 to 1000 fmols. Recovery efficiencies were over 90% for JH III and 98% for FA with excellent reproducibility.

SIGNIFICANCE

The proposed method is applicable when sensitive detection and accurate quantification of limited amount of sample is needed. Examples include corpora allata, hemolymph and whole body of female adult Aedes aegypti and whole body Drosophila melanogaster. A variety of additional functional groups can be targeted to add fluorescent tags to the remaining JH III precursors.

Benzofurazan sulfides for thiol imaging and quantification in live cells through fluorescence microscopy

Thiol groups play a significant role in various cellular functions. Cellular thiol concentrations can be affected by various physiological or pathological factors. A fluorescence imaging agent that can effectively and specifically image thiols in live cells through fluorescence microscopy is desirable for live cell thiol monitoring. Benzofurazan sulfides 1a-1e were synthesized and found to be thiol specific fluorogenic agents except 1d. They are not fluorescent but form strong fluorescent thiol adducts after reacting with thiols through a sulfide-thiol exchange reaction. On the other hand, they exhibit no reaction with other biologically relevant nucleophilic functional groups such as -NH(2), -OH, or -COOH revealing the specificity for the detection of thiols. Sulfide 1a was selected to confirm its ability to image cellular thiols through fluorescence microscopy. The compound was demonstrated to effectively image and quantify thiol changes in live cells through fluorescence microscopy using 430 and 520 nm as the excitation and emission wavelengths, respectively. The quantification results of total thiol in live cells obtained from fluorescence microscopy were validated by an high-pressure liquid chromatography/ultraviolet (HPLC/UV) total thiol assay method. The reagents and method will be of a great value to thiol redox-related research.

Highly sensitive and selective derivatization-LC method for biomolecules based on fluorescence interactions and fluorous separations

A fluorescence derivatization LC method is a powerful tool for the analysis with high sensitivity and selectivity of biological compounds. In this review, we introduce new types of fluorescence derivatization LC analysis methods. These are (1) detection-selective derivatization methods based on fluorescence interactions generated from fluorescently labeled analytes: excimer fluorescence derivatization and fluorescence resonance energy transfer (FRET) derivatization; (2) separation-selective derivatization methods using the fluorous separation technique: fluorous derivatization, F-trap fluorescence derivatization, and fluorous scavenging derivatization (FSD).

Experimental and theoretical studies on o-, m- and p-chlorobenzylideneaminoantipyrines

Three antipyrine derivatives of o-, m- and p-chlorobenzylideneaminoantipyrines were characterized by spectral techniques and density functional calculations. The optimized configurations are very close to the XRD values and are used as foundations to investigate the molecular properties. The spectral assignments were attempted to ascribe to the vibrational modes of the detailed substructures with the aid of theoretical calculations because of the satisfactory consistencies between the experimental and theoretical spectra for each of the studied compounds. Raman spectral ascriptions represent that the pi-conjugated moieties linked by Schiff base imines are responsible for the excellent Raman scattering activities of these compounds. The linear polarizabilities and first hyperpolarizabilities of the studied molecules indicate that the compounds are good candidates of nonlinear optical materials. The statistical thermodynamic functions and their correlations with temperatures obtained from the theoretical vibrations are similar to each other among the isomers.

Vibrational spectroscopic study of o-, m- and p-hydroxybenzylideneaminoantipyrines

Three structurally similar antipyrine derivatives of o-hydroxybenzylideneaminoantipyrine (o-HBAP), m-hydroxybenzylideneaminoantipyrine (m-HBAP) and p-hydroxybenzylideneaminoantipyrine (p-HBAP) were characterized by FT-IR, FT-Raman experimental techniques and density functional theoretical (DFT) calculations. The comparisons between the calculated and experimental results covering molecular structures, assignments of fundamental vibrational modes and thermodynamic properties were investigated. The optimized molecular geometries agree well with the corresponding experimental values by comparing with the XRD data. The comparisons and assignments of the vibrational frequencies indicate that the experimental spectra also coincide satisfactorily with those of theoretically simulated spectrograms except the hydrogen-bond coupling infrared vibrations, and compounds can be distinguished by the IR and Raman spectra due to the differences of the hydroxyl-substituted positions and molecular packing, and the strong Raman scattering activities of the compounds are tightly relative to the molecular conjugative moieties linked through the Schiff base imines. The thermodynamic functions and their correlations with temperatures were also obtained from the theoretical harmonic frequencies.

Fluorescence enhancement by hydroperoxides based on a change in the intramolecular charge transfer character of benzofurazan

Strong fluorescence signals were observed after the reaction of novel reagents with hydroperoxides.

Novel stable fluorophore, 6-methoxy-4-quinolone, with strong fluorescence in wide pH range of aqueous media, and its application as a fluorescent labeling reagent

6-Methoxy-4-quinolone (6-MOQ, 1), an oxidation product derived from 5-methoxyindole-3-acetic acid, is a novel fluorophore, which has several useful characteristics for biomedical analysis. Compound 1 has strong fluorescence with a large Stokes' shift in aqueous media, and the maximum fluorescence excitation and emission wavelengths are 243 nm and 374 nm, respectively. The molar absorptivity at the maximum excitation wavelength and fluorescence quantum yield in aqueous 10% (v/v) methanol are 32 600 L mol(-1) cm(-1) and 0.38, respectively. The fluorescence intensity of 1 is scarcely affected by changing the medium pH, showing strong fluorescence from pH 2.0 to 11.0. In addition, 1 is highly stable against light and heat, and no degradation was observed at 60 degrees C for 3 days with exposure to daylight. As a fluorescent labeling reagent, [(6-methoxy-4-oxo-1,4-dihydroquinolin-3-yl)methyl]amine (6-MOQ-NH2, 2) was synthesized, and determination of carboxylic acids was demonstrated; 50 pmol of standard propionic acid and isobutyric acid were derivatized, and the obtained S/N ratios for 10 fmol (injection amount) of these two acids were 206 and 164, respectively.

Fluorescent molecular thermometers based on polymers showing temperature-induced phase transitions and labeled with polarity-responsive benzofurazans

Poly(N-isopropylacrylamide) in aqueous solution undergoes a phase transition at approximately 32 degrees C. The fluorescence properties of benzofurazans are affected by solvent polarity. We combine these two characteristics for the first time to develop sensitive fluorescent molecular thermometers. Five fluorescent monomers having a benzofurazan skeleton were synthesized, and the copolymers of N-isopropylacrylamide (NIPAM) and a small quantity of the fluorescent monomer were obtained to investigate their fluorescence properties. With increase in temperature, the copolymers in water showed the temperature-induced phase transition at approximately 32 degrees C and the fluorescence intensities of the copolymers concurrently increased. Especially, for the copolymer of 4-N-(2-acryloyloxyethyl)-N-methylamino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole and NIPAM, the fluorescence intensity at 37 degrees C was 13.3-fold that seen at 29 degrees C. The sensitive range of temperature of these fluorescent molecular thermometers is changed by the replacement of the NIPAM units by N-isopropylmethacrylamide or N-n-propylacrylamide units in the copolymers. The basis of these fluorescent molecular thermometers is the decrease in the microenvironmental polarities near the main chains of the copolymers with increasing temperature, as confirmed from the maximum emission wavelengths of the benzofurazan units in the copolymers. The responses from the copolymers to the change in temperature are reversible and exactly repeatable during at least 10 cycles of heating and cooling.

Modulation of the Sensitive Temperature Range of Fluorescent Molecular Thermometers Based on Thermoresponsive Polymers

Fluorescent molecular thermometers based on polymers showing a temperature-induced phase transition and labeled with polarity-sensitive fluorescent benzofurazans are the most sensitive known. Here we show a simple and effective method for modulating the sensitive temperature ranges of fluorescent molecular thermometers based on such temperature-responsive polymers. 4-N-(2-acryloyloxyethyl)-N-methylamino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole was adopted as a polarity-sensitive fluorescent benzofurazan, and nine copolymers of two kinds of acrylamide derivative (N-n-propylacrylamide, N-isopropylacrylamide, and/or N-isopropylmethacrylamide) with a small amount of DBD-AE were obtained. The fluorescence intensities of these copolymers in aqueous solution sharply increased with increasing temperature over a small range (6-7 degrees C). In contrast, these fluorescent molecular thermometers differed from one another in the sensitive temperature range (between 20 and 49 degrees C). Moreover, the sensitive temperature ranges were well related to the acrylamide ratios in feed. In addition, the responses from these fluorescent molecular thermometers to the change in temperature were reversible and exactly repeatable during 10 cycles of heating and cooling (relative standard deviation of the fluorescence intensity, 0.44-1.0%).

Capillary electrophoresis with laser induced-fluorescence detection of profens derivatized with the water-soluble fluorogenic reagent 4-N-(4-N′-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole

Profens, including pranoprofen, fenoprofen, flurbiprofen, ketoprofen and ibuprofen (Ib), were derivatized by a water-soluble benzofurazan fluorescent reagent, 4-N-(4-N'-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole and then were run on capillary electrophoresis in a NH4Ac-HAc buffer of pH 3.1 containing 2.4 mM beta-cyclodextrin. At room temperature, the derivatization reaction was catalyzed by triphenyl phosphine and diphenyl disulfide in acetonitrile medium, and the derivatives fluoresce around 530 nm when excited at 488 nm. With the CE running on a 50 cm x 50 microm I.D. length fused-silica capillary of by using Ar+ laser induced-fluorescence detection, the detection limits attained were in the range of 0.16 to 0.3 fmol.

A study of the relationship between the chemical structures and the fluorescence quantum yields of coumarins, quinoxalinones and benzoxazinones for the development of sensitive fluorescent derivatization reagents

To develop new fluorescent derivatization reagents, we investigated the relationship between the chemical structures and the fluorescence quantum yields (phi(f)) of coumarins, quinoxalinones and benzoxadinones. Forty-six compounds were synthesized and their fluorescence spectra were measured in n-hexane, ethyl acetate, methanol and water. The energy levels of these compounds were calculated by combination of the semi-empirical AM1 and INDO/S (CI = all) methods. The deltaE(Tn(n,pi*), S1(pi,pi*)) (the energy gap between the Tn(n,pi*) and S1(pi,pi*) states) values were well correlated with the phi(f) values, which enables us to predict the phi(f) values from their chemical structures. Based on this relationship, 3-phenyl-7-N-piperazinoquinoxalin-2(1H)-one (PQ-Pz) and 7-(3-(S)-aminopyrrolidin-1-yl)-3-phenylquinoxalin-2-(1H)-one (PQ-APy) were developed as fluorescent derivatization reagents for carboxylic acids. The derivatives of the carboxylic acids with PQ-Pz and PQ-APy showed large phi(f) values even in polar solvents, suggesting that these reagents are suitable for the microanalysis of biologically important carboxylic acids by reversed phase HPLC.

Recent progress in derivatization methods for LC and CE analysis

The derivatization procedure with a suitable fluorescence or chemiluminescence reagent is performed for the purpose of increasing the detection sensitivity and selectivity, in high-performance liquid chromatography (HPLC) and/or capillary electrophoresis (CE). In this article, recent derivatization methods and their applications to biosamples are described. In HPLC, femto mol order of mass detection limits are obtained by derivatization. Regarding the fluorescence reagents, the use of water-soluble reagents has been effective to avoid an undesired adsorption in the process of determination of peptides. In CE, the advantages of having extremely low mass detection limits (ranging from atto to yocto mol level) and requiring only a very short analysis time (less than a few minutes) are made possible by using laser-induced fluorescence or near infra-red detections.

Analytical Chemical Studies on High-Performance Recognition and Detection of Bio-molecules in Life

In order to understand the mechanism for maintaining life of animals based on the search of dynamics of biomolecules, I have developed several sensitive and selective methods for their quantification. Using the methods of derivatization with the developed benzofurazan fluorogenic reagents (4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), ammonium 7-fluoro-2,1,3-benzoxadiazole 4-sulfonate (SBD-F) and etc.) followed by high-performance liquid chromatography (HPLC)--fluorescence detection, a certain kind of biological and clinical importance was demonstrated of chiral bio-molecules (D-amino acids, D-lactic acid and so on), peptides and proteins. The proposed method (derivatization with SBD-F, isolation of the fluorescent proteins by two-dimensional HPLC, enzymatic digestion and identification of the altered proteins by HPLC-mass spectrometry (MS)/MS with database-searching algorithm) for proteomics studies revealed the changed proteins in the islets of Langerhans of the dexamethazone-induced diabetic rats. An importance of catecholamine metabolism on the blood pressure regulation was also suggested by the method of HPLC-chemiluminescence detection of catecholamines and their 3-O-methylmetabolites. A new field of Analytical Chemistry, i.e., Bio-Analytical Chemistry, was also proposed.

Design and synthesis of a hydrophilic fluorescent derivatization reagent for carboxylic acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH2), and its application to capillary electrophoresis with laser-induced fluorescence detection

A hydrophilic fluorescent derivatization reagent for fatty acids, 4-N-(4-N-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole (NBD-PZ-NH(2)), was designed and synthesized. NBD-PZ-NH(2) possesses not only a fluorophore and a reacting group but also a positive charge group and, thus, was hydrophilic and suitable for application to capillary electrophoresis. NBD-PZ-NH(2) reacted with fatty acids in the presence of triphenylphosphine (TPP) and 2,2'-dipyridyl disulfide (DPDS) at room temperature within 10 min. The derivatives were strongly fluoresced and were positively charged at pH below 3. The derivatives of C4-C20 fatty acids were separated within 10 min in 50% acetonitrile in water containing 30 mM ammonium acetate and 1.0 M acetic acid by capillary electrophoresis with laser-induced fluorescence (CE-LIF) detection. The detection limits attained were 6.5 nM (signal-to-noise ratio of 3). It is proposed that NBD-PZ-NH(2) is a prominent derivatization reagent for fatty acids which is suitable for CE-LIF application.