Capillary electrochromatography analysis of hormonal cyclic and linear peptides

New capillary coatings in open tubular CEC as models for biological membranes

Novel stationary phases in open tubular CEC were investigated. The coating procedure was fast and simple. The coating material contained membrane suspension of different neuronal cell lines. The performance and stability of three cell lines: human neuroblastoma SH-SY5Y, murine microglia Bv-2 and human glioma U87-MG cells were studied. The coating solution was expected to contain both membrane proteins and membrane lipids. The presence of membrane proteins was tested by Western blotting and the presence of phospholipids by the analysis of phosphorus content. The stability of the coating was estimated by monitoring the mobility of EOF over successive runs. The effects of pH, storage time and temperature on the coating stability were also studied. The results showed that the cell membrane-based coating was stable over pH range of 6.5-8.5. Coatings derived from different cells yielded similar stability and EOF mobility. Capillary coated with a membrane solution was stable over 3-day period. The same coating solution could be used for 3 weeks.

Capillary electrochromatography and on-line concentration

Capillary electrochromatography (CEC) is a micro-separation technique that combines the advantages of capillary zone electrophoresis with those of high-performance liquid chromatography. Accordingly, it has attracted extensive attention over the last decade. Among the stationary phases for CEC, monolithic stationary phase has been regarded as the most suitable stationary phase for CEC because of its simple preparation, the elimination of frits, and its excellent performance. In this chapter, procedures for preparing CEC monolithic columns with an improved configuration, in which there are stationary phases at both sides of detection window and no stationary phase at detection window, are presented. The separation of acidic and basic compounds on such monolithic columns is used as an example to demonstrate CEC separation protocol. Additionally, an on-line concentration technique in CEC is presented. As a result of the coexistence of stationary phase and electric field in a CEC column, it is possible to employ chromatographic zone sharpening and field-amplified sample stacking effects simultaneously to improve CEC detection sensitivity.

Investigation of the ion-exchange properties of methacrylate-based mixed-mode monolithic stationary phases employed as stationary phases in capillary electrochromatography

The potential of methacrylate-based mixed-mode monolithic stationary phases bearing sulfonic acid groups for the separation of positively charged analytes (alkylanilines, amino acids, and peptides) by capillary electrochromatography (CEC) is investigated. The retention mechanism of protonated alkylanilines as positively charged model solutes on these negatively charged mixed-mode stationary phases is investigated by studying the influence of mobile phase and stationary phase parameters on the corrected retention factor which was calculated by taking the electrophoretic mobility of the solutes into consideration. It is shown that both solvophobic and ion-exchange interactions contribute to the retention of these analytes. The dependence of the corrected retention factor on (1) the concentration of the counter ion ammonium and (2) the number of methylene groups in the alkyl chain of the model analytes investigated shows clearly that a one-site model (solvophobic and ion-exchange interactions take place simultaneously at a single type of site) has to be taken to describe the retention behaviour observed. Comparison of the CEC separation of these charged analytes with electrophoretic mobilities determined by open-tubular capillary electrophoresis shows that mainly chromatographic interactions (solvophobic and ion-exchange interactions) are responsible for the selectivity observed in CEC, while the electrophoretic migration of these analytes plays only a minor role.

Capillary electrochromatography of proteins and peptides

This review summarizes applications of CEC for the analysis of proteins and peptides. This "hybrid" technique is useful for the analysis of a broad spectrum of proteins and peptides and is a complementary approach to liquid chromatographic and capillary electrophoretic analysis. All modes of CEC are described--granular packed columns, monolithic stationary phases as well as open-tubular CEC. Attention is also paid to pressurized CEC and the chip-based platform.

Theory and practical understanding of the migration behavior of proteins and peptides in CE and related techniques

CEC is defined as an analytical method, where the analytes are separated on a chromatographic column in the presence of an applied voltage. The separation of charged analytes in CEC is complex, since chromatographic interaction, electroosmosis and electrophoresis contribute to the experimentally observed behavior. The putative contribution of effects such as surface electrodiffusion has been suggested. A sound theoretical treatment incorporating all effects is currently not available. The question of whether the different effects contribute in an independent or an interdependent manner is still under discussion. In this contribution, the state-of-the-art in the theoretical description of the individual contributions as well as models for the retention behavior and in particular possible dimensionless 'retention factors' is discussed, together with the experimental database for the separation of charged analytes, in particular proteins and peptides, by CEC and related techniques.

CEC separation of insect oostatic peptides using a strong-cation-exchange stationary phase

The separation of several insect oostatic peptides (IOPs) was achieved by using CEC with a strong-cation-exchange (SCX) stationary phase in the fused-silica capillary column of 75 microm id. The effect of organic modifier, ionic strength, buffer pH, applied voltage, and temperature on peptides' resolution was evaluated. Baseline separation of the studied IOPs was achieved using a mobile phase containing 100 mM pH 2.3 sodium phosphate buffer/water/ACN (10:20:70 v/v/v). In order to reduce the analysis time, experiments were performed in the short side mode where the stationary phase was packed for 7 cm only. The selection of the experimental parameters strongly influenced the retention time, resolution, and retention factor. An acidic pH was selected in order to positively charge the analyzed peptides, the pI's of which are about 3 in water buffer solutions. A good selectivity and resolution was achieved at pH <2.8; at higher pH the three parameters decreased due to reduced or even zero charge of peptides. The increase in the ionic strength of the buffer present in the mobile phase caused a decrease in retention factor for all the studied compounds due to the decreased interaction between analytes and stationary phase. Raising the ACN concentration in the mobile phase in the range 40-80% v/v caused an increase in both retention factor, retention time, and resolution due to the hydrophilic interactions of IOPs with free silanols and sulfonic groups of the stationary phase.

Chromatographic behaviour of peptides on a mixed-mode stationary phase with an embedded charged group by capillary electrochromatography and high-performance liquid chromatography

Retention behaviour of biological peptides was investigated on a stationary phase bearing an embedded quaternary ammonium group in a C21 alkyl chain by both high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC). In HPLC experiments, variation of acetonitrile (ACN) content in the mobile phase showed that peptides are mainly separated by RP mechanism. The weak or negative retention factors observed as compared to C18 silica stationary phase suggested the involvement of an electrostatic repulsion phenomenon in acidic conditions. Comparison of HPLC and CEC studies indicated that (i) ion-exclusion phenomenon is more pronounced in HPLC and (ii) higher ACN percentage in mobile phase induce for some peptides an increase of retention in CEC, pointing out the existence of mechanisms of retention other than partitioning mainly involved in chromatographic process. This comparative study demonstrated the critical role of electric field on peptide retention in CEC and supports the solvatation model of hydrolytic pillow proposed by Szumski and Buszewski for CEC using mixed mode stationary phase in CEC.

Selection of two reliable parameters to evaluate the impact of the mobile-phase composition on capillary electrochromatography performance with monolithic and particle-packed capillary columns

Different models have been described in the literature to evaluate the total porosity of CEC columns: gravimetric, flow as well as conductivity-based methods. In this study, these models have been compared for two kinds of CEC columns: two mixed-mode silica particle stationary phases and different monolithic columns (acrylate or polystyrene divinylbenzene-based). The total porosities measured from the conductivity-based methods were lower than the total column porosities obtained by gravimetric or flow methods for all the investigated columns while the wide distribution of observed values shows that conductivity-based methods discriminate columns more efficiently with very different properties. We propose a conductivity-based method taking into account the actual length proposed by Horvath, to evaluate what we call an "actual electrokinetic" porosity (AEP). This parameter, based on electrokinetic theory only, affords the most consistent evaluation of porosity under experimental CEC conditions for the packed- and acrylate-based monolithic columns. To illustrate the potential of AEP and actual EOF for the estimation of the performances of a CEC system (stationary and mobile phases) we studied the influence of the mobile-phase composition on these parameters for CEC separations with an ammonium embedded packed stationary phase. The AEP and the actual electroosmotic mobility should allow a better understanding of the perfusive EOF and stationary-phase wettability. For neutral compounds (substituted phenols), AEP evaluation allowed us to predict the mobile-phase conditions able to enhance the efficiency while both AEP and actual EOF had to be considered in the case of peptide analysis.

Use of mixed-mode sorbents for the electrochromatographic separation of thrombin receptor antagonistic peptides

In this study, the thrombin receptor antagonistic peptide TRAP-1 and its alanine-scan analogues, TRAP 2-6, have been employed as probes to characterise the performance of C18/SCX mixed-mode capillary electrochromatographic (CEC) columns. It was found that the resolution of this group of peptides could only be achieved in a narrow pH range with phosphate-based running electrolytes. The influence of the running electrolyte composition, e.g. the buffer choice, the ionic strength, the pH and the organic solvent content, on the electroosmotic flow (EOF) of these mixed-mode CEC columns was investigated. In addition, the retention mechanism for this group of peptide probes in the electrochromatographic process was studied by examining the effect of varying the running electrolyte composition. As a result, it can be concluded that the electrochromatographic separation of this set of peptides was mediated by a combination of electrophoretic migration and chromatographic retention involving both hydrophobic as well as ion exchange interactions. By modulating the running electrolyte composition, the hydrophobic or ion exchange components of the interaction process could be made to dominate the chromatographic retention of the peptides. Based on this strategy, a high-resolution separation of six closely related synthetic peptides was demonstrated with this mixed-mode CEC system.

Preparation and characterization of alkylated polymethacrylate monolithic columns for micro-HPLC of proteins

Protein separations were carried out by micro-high performance liquid chromatography (micro-HPLC) with surface alkylated monolithic columns, which were prepared by in situ copolymerization of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) in the presence of dodecanol and toluene as porogens. First, glycidyl groups at the surface of the porous monolith were hydrolyzed with sulfuric acid. The hydroxyl groups thus formed were then reacted with n-alkyl chloride to form alkylated stationary phase. Separation performance for proteins on columns with C18 and C8 stationary phases was compared. The results showed that a poly(GMA-EGDMA) support derivatized with octadecyl moieties could achieve much better resolution than one with octyl groups. A protein mixture was separated with the octadecylated poly-(GMA-EGDMA) monolithic column, and the effluent peaks were collected and analyzed by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS). The physical properties of the monolithic columns such as column morphology, surface area, mesopore size distribution, and column permeability were further characterized by scanning electron microscopy (SEM), multipoint BET nitrogen adsorption/desorption, and Darcy's law, respectively.

Retention behaviour of peptides in capillary electrochromatography using an embedded ammonium in dodecacyl stationary phase

The potential of a silica stationary phase bearing an embedded cationic quaternary amine in dodecacyl chain, to separate peptides by capillary electrochromatography (CEC) has been evaluated. The ability of this stationary phase, to generate a consistent anodic electroosmotic flow was first evaluated. This flow was found to be independent of pH over a wide range (2-12), of the acetonitrile percentage in the electrolyte. The stability of the stationary phase evaluated through the electroosmotic flow variations was demonstrated at extreme pH values (2.5 and 9.1). A careful examination of the influence of mobile phase conditions (acetonitrile percentage, salt concentration and nature of buffer) on the electrochromatographic retention and electrophoretic migration behaviour of different standard peptides was carried out. In acidic conditions, the electrokinetic contribution appears to be predominant compared to the chromatographic one. Several types of chromatographic interactions, reversed-phase partitioning and anion exchange, were involved in the CEC of peptides, whereas repulsive electrostatic interaction could be considered as negligible. This stationary phase affords different selectivity compared to that observed on a C18 stationary phase. Finally, the method was applied to the peptide mapping of beta-lactoglobulin and human growth hormone under unpressurized and isocratic elution.

Capillary electrochromatography of peptides and proteins

This review surveys the accomplishments in the separation of peptides and proteins by capillary electrochromatography (CEC) over the last decade. A significant number of research articles have been published on this topic since the last review. Peptide and proteins separations have been carried out in all three formats of CEC, i.e., packed bed, continuous bed and open-tubular (OT) format. In addition to electrophoresis, different chromatographic modes have been successfully exploited with the most prevalent being reversed-phase mode followed by ion-exchange. Although many researchers continue to use model proteins and peptides primarily to evaluate the performance of novel stationary phases some researchers have also applied CEC to the analysis of real-life samples. The potential of CEC to yield complementary information and sometimes a superior separation with respect to established techniques, i.e., microbore HPLC and capillary electrophoresis has been demonstrated. Instrumental modifications in order to facilitate coupling of CEC to mass spectrometry have further upgraded the value of CEC for proteomic analysis. Capillaries are still the separation vehicle of choice for most researchers yet the microfluidic platform is gaining momentum, propelled particularly by its potential for multitasking, e.g., performing different chromatographic modes in series.

Comparison of a three-peptide separation by capillary electrochromatography, voltage-assisted liquid chromatography and nano-high-performance liquid chromatography

A mixture of three peptides was separated by capillary electrochromatography (CEC), nano-HPLC and voltage-assisted LC. In the latter case the charged analytes migrate through a neutral stationary phase driven by electrophoresis while their interaction with the stationary phase provides the basis for a chromatographic separation. The stationary phases used were poly(glycidyl methacrylate-co-ethylene dimethacrylate)-based monoliths that could be used directly as neutral "C1"-type columns for voltage-assisted LC and nano-HPLC, while their application in CEC became possible after derivatization of the epoxy groups with ionogenic N-ethylbutylamine functions. The separation of the peptide mixture was possible in all three modes. Highest plate numbers and resolutions were obtained under voltage-assisted conditions. The elution order showed dependencies on the charge density but also on the hydrophobicity of the peptides and was different in the three investigated chromatographic modes. The effect of changes in the ionic strength and the organic solvent content of the mobile phase on the resolution and the migration behavior of the peptides was investigated and showed the expected behavior. Voltage-assisted LC is suggested as an alternative to CEC for the separation of charged analytes by electrochromatography.

Electrochromatographic retention studies on a flavin-binding RNA aptamer sorbent

Aptamers are oligonucleotides that are isolated and amplified on the basis of their recognition of a target molecule. In this study, an RNA aptamer isolated and amplified on the basis of its affinity for flavin mononucleotide (FMN) was covalently bound to the inner walls of fused-silica capillaries. This aptamer recognizes the flavin moiety of both FMN and flavin adenine dinucleotide (FAD). When an attempt was made to evaluate these capillaries according to existing theory, the theory proved to be insufficient. We describe a new method to evaluate capillaries for use in open-tubular capillary electrochromatography (OTCEC) of charged analytes, which combines OTCEC and flow-counterbalanced capillary electrophoresis. This method enabled us to extract k' and evaluate k(CEC) values for these capillaries, and the dependence of these values on Mg(2+) concentration was explored. The k' values for these capillaries ranged from 0.0951 to 0.2530 and from 0.0255 to 0.1118 for FMN and FAD, respectively.

Capillary electrochromatography with monolithic stationary phases

This article, which is closely related to part II, is concerned with the evaluation of the retentive properties of cationic stearyl-acrylate monoliths (i.e. cationic C17 monoliths) over a wide range of elution conditions with various uncharged and charged solutes including proteins. The retention parameters for charged solutes including the retention factor k* observed under capillary electrochromatography conditions and the velocity factor k(ep)*, which reflects the electrophoretic process, were measured for weak, moderate and strong basic compounds. These retention parameters allowed the assessment of the respective contributions from electrophoretic and partitioning separation mechanisms. The cationic C17 monoliths exhibited sufficient hydrophobic interactions with relatively weak basic solutes. Moderate and strong bases showed migration behaviors dominated by their relatively strong electrophoretic mobility with marginal chromatographic partitioning. At low pH, the cationic C17 monoliths allowed the separation of proteins with minimum electrostatic interactions between proteins and the cationic sites on the surface of the stationary phase. The utility of the cationic C17 monoliths was demonstrated in the rapid and efficient separation of two crude extracts of membrane proteins, namely galactosyl transferase and cytochrome c reductase. Short capillary columns (8.5 cm effective length) of the cationic C17 monoliths allowed rapid and efficient separations of neutral and charged pesticides and metabolites, phenylthiohydrantoin amino acids and proteins at the time scale of seconds at relatively high flow velocity.

On the nature of the forces controlling selectivity in the high performance capillary electrochromatographic separation of peptides

In this minireview, the nature of the forces controlling selectivity in the high performance capillary electrochromatographic (HP-CEC) separation of peptides has been examined. For uncharged and charged peptides, a synergistic interplay occurs in HP-CEC systems between adsorptive/partitioning events and electrokinetically driven motion. Moreover, at high field strengths, both bulk electrophoretic migration and surface electrodiffusion occur. Thus, the migration behavior of peptides in different HP-CEC systems can be rationalized in terms of the combined consequences of these various processes. Moreover, in HP-CEC, the buffer electrolyte interacts with both the peptide analytes and the sorbent as bulk phenomena. These buffer-mediated processes control the solvational characteristics, ionization status and conformational behavior of the peptides as well as regulate the double-layer properties of the sorbent, and the ion flux and electro-osmotic flow characteristics of the HP-CEC system per se. These buffer electrolyte effects mediate mutual interactions between the peptide and the sorbent, irrespective of whether the interaction occurs at the surface of microparticles packed into a capillary, at the surface of a contiguous monolithic structure formed or inserted within the capillary or at the walls of the capillary as is the case with open tubular HP-CEC. Diverse molecular and submolecular forces thus coalesce to provide the basis for the different experimental modes under which HP-CEC can be carried out. As a consequence of this interplay, experimental parameters governing the separation of peptides in HP-CEC can be varied over a wide range of conditions, ensuring numerous options for enhanced selectivity, speed, and resolution of peptides. The focus of the peptide separation examples presented in this minireview has been deliberately restricted to the use of HP-CEC capillaries packed with n-alkyl-bonded silicas or mixed-mode strong ion exchange sorbents, although other types of sorbent chemistries can be employed. From these examples, several conclusions have been drawn related to the use of HP-CEC in the peptide sciences. These observations confirm that variation of a specific parameter, such as the pH or the content of the organic solvent modifier in the buffer electrolyte, simultaneously influences all other physicochemical aspects of the specific HP-CEC separation. Peptide selectivity in HP-CEC thus cannot be fine-tuned solely through the use of single parameter optimization methods. In this context, HP-CEC differs significantly from the analogous reverse phase high performance liquid chromatography (RP-HPLC) procedures with peptides. Rather, more sophisticated multiparameter optimization procedures, involving knowledge of (a) the field strength polarity, (b) its contour and flux characteristics, (c) effects of buffer electrolyte composition and pH, (e) the influence of the temperature, and (f) the impact of the sorbent characteristics, are required if the full capabilities offered by HP-CEC procedures are to be exploited. In this minireview, the HP-CEC migration behavior of several different sets of synthetic peptides has been examined, and general guidelines elaborated from these fundamental considerations to facilitate the interpretation and modulation of peptide selectivity in HP-CEC.

Investigation of mixed-mode monolithic stationary phases for the analysis of charged amino acids and peptides by capillary electrochromatography

The potential of N,N-dimethylacrylamide-piperazine diacrylamide-based monolithic stationary phases bearing sulfonic acid groups for electroosmotic flow generation is investigated for the separation of positively charged amino acids and peptides. The capillary columns were used under electrochromatographic but also under purely chromatographic (nano-HPLC) conditions and the separations interpreted as the result of possible chromatographic and electrophoretic contributions. The stationary phases were found to be mechanically stable up to pressures of 190 bar and chemically stable towards a wide variety of organic and hydro-organic mobile phases. In order to investigate the retention mechanism, the salt concentration and the organic solvent content of the (hydro-)organic mobile phase were varied in a systematic manner, taking three aromatic amino acids (phenylalanine, tryptophan, histidine) as model analytes. The respective contributions of electrostatic and hydrophobic and/or hydrophilic interactions were further investigated by varying the charge density and the hydrophobicity of the standard stationary phase. The former was done by varying the amount of charged monomer (vinylsulfonic acid) added during synthesis, the latter by (partially) replacing the interactive monomer (N,N-dimethylacrylamide) by other more hydrophobic monomers. A mixed mode retention mechanism based primarily on electrostatic interactions modified in addition by "hydrophilic" ones seems most suited to interpret the behavior of the amino acids, which stands in contradistinction to the previously investigated case of the behavior of neutral analytes on similar stationary phases. Finally the separation of small peptides was investigated. While the separation of Gly-Phe and Gly-Val was not possible, the separation of Phe-Gly-Phe-Gly and Gly-Phe but also of the closely related Gly-His and Gly-Gly-His could be achieved.

The CEC behaviour of several synthetic peptides related to the activin betaA-betaD subunits

The resolution of several structurally related synthetic peptides, derived from the loop 3 region of the activin betaA-betaD subunits, has been studied using capillary electrochromatography (CEC) with Hypersil n-octadecylsilica as the sorbent. The results confirm that the CEC migration of these peptides can be varied in a charge-state-specific manner as the properties of the background electrolyte, such as pH, salt concentration and content of organic modifier, or temperature are systematically changed. Acidic peptides followed similar trends in retention behaviour, which was distinctly different to that shown by more basic peptides. The CEC separation of these peptides with the Hypersil n-octadecyl-silica involved distinguishable contributions from both electrophoretic mobility and chromatographic retention. Temperature effects were reflected as variations in both the electro-osmotic flow and the electrophoretic mobility of the peptides. When the separation forces acting on the peptides were synergistic with the electro-osmotic flow, as, for example, with the positively charged peptides at a particular pH and buffer electrolyte composition, their retention coefficient, kappacec, decreased with increasing capillary temperature, whereas when the separation forces worked in opposite directions, as for example with negatively charged peptides, their kappacec values increased slightly with increasing temperature. Moreover, when the content of organic modifier, acetonitrile, was sufficiently high, e.g. > 40% (v/v) and nonpolar interactions with the Hypersil n-octadecyl-silica sorbent were suppressed, mixtures of both the basic and acidic synthetic peptides could be baseline resolved under isocratic conditions by exploiting the mutual processes of electrophoretic mobility and electrostatic interaction. A linear relationship between the ln kappacec values and the volume fractions, psi, of the organic modifier over a limited range of psi-values, was established for the negatively charged peptides under these isocratic conditions. These findings thus provide useful guidelines in a more general context for the resolution and analysis of structurally related synthetic peptides using CEC methods.

The separation of biomolecules using capillary electrochromatography

The unique properties of capillary electrochromatography such as high performance, high selectivity, minimum consumption of both reagents and samples, and good compatibility with mass spectrometry make this technique an attractive one for the analysis of biomolecules including peptides, proteins, carbohydrates, nucleosides and nucleotides. Irreversible adsorption between the biomolecules and the charged packing surface leads to a lack of reproducibility and serious peak tailing, so various approaches have been taken to overcome this and to improve the technique for future challenges.

Peptide analysis by rapid, orthogonal technologies with high separation selectivities and sensitivities

This article examines the current status of peptide analysis by orthogonal micro-/nano-separation strategies, with emphasis on the complementary use of high performance capillary liquid chromatography (micro-HPLC), capillary zonal electrophoresis (HPCZE), open tubular capillary electrochromatography (ot -CEC) and packed capillary electrochromatography (p -CEC). The ability to interface these techniques with mass spectroscopic (MS) procedures has enabled substantial progress to be made in the analysis of very small quantities of peptides, as well as proteins and other bio-macromolecules. As a consequence, the staged application of these high resolution techniques as part of the standardisation of biological products via robust, sensitive protocols is rapidly becoming a reality. Recent conceptual and theoretical advances have also allowed improved levels of prediction and optimisation of these procedures. Since significant differences in selectivity can be achieved with micro-HPLC, HPCZE and HPCEC respectively, collectively these sophisticated techniques provide unprecedented opportunities for the rapid, orthogonal and sensitive separation of complex mixtures of peptides and proteins. Several advantages of using these technologies in tandem are highlighted.