An evaluation of a four-channel multiplexed electrospray tandem mass spectrometry for higher throughput quantitative analysis

High-Throughput Mass Spectrometry Screening for Inhibitors of Phosphatidylserine Decarboxylase

A high-throughput mass spectrometry assay to measure the catalytic activity of phosphatidylserine decarboxylase (PISD) is described. PISD converts phosphatidylserine to phosphatidylethanolamine during lipid synthesis. Traditional methods of measuring PISD activity are low throughput and unsuitable for the high-throughput screening of large compound libraries. The high-throughput mass spectrometry assay directly measures phosphatidylserine and phosphatidylethanolamine using the RapidFire™ platform at a rate of 1 sample every 7.5 s. The assay is robust, with an average Z′ value of 0.79 from a screen of 9920 compounds. Of 60 compounds selected for confirmation, 54 are active in dose-response studies. The application of high-throughput mass spectrometry permitted a high-quality screen to be performed for an otherwise intractable target. ( Journal of Biomolecular Screening 2007:628-634)

A multichannel rotating electrospray ionization mass spectrometry (MRESI): instrumentation and plume interactions

A multichannel rotating electrospray ionization (MRESI) mass spectrometry method is described. Plume interactions are also systematically studied.

Parallel supercritical fluid chromatography/mass spectrometry system for high-throughput enantioselective optimization and separation

An automated parallel four-column supercritical fluid chromatography (SFC)/MS system to perform high-throughput enantioselective chromatographic method development and optimization is described in this paper. The initial screening was performed in parallel on four chiral SFC columns over several buffer conditions. Optimization of the separation of enantiomers was achieved on a single chiral column. The screening and optimization were accomplished in a fully automated, user-independent manner. Incorporation of column control valves in front of each chiral column allowed the system to switch from parallel four-column screening mode to single-column optimization mode. To facilitate the process, a custom software program, we termed, intelligent parallel optimization for chiral SFC separation (IPOCSS), was developed in-house. The custom software monitored each of the runs in real-time, processed each data set, and by incorporating user-defined criteria (e.g., resolution of the two enantiomer chromatographic peaks), selected the next set of experiments and automatically optimized the enantioseparation. This new approach, combining parallel SFC/MS screening and intelligent software-controlled method optimization, has resulted in a streamlined, high-throughput tool for enantioselective method development, which has been applied successfully to enantioseparations in support of drug discovery.

Multiplex multidimensional nanoLC-MS system for targeted proteomic analyses

The present work describes a dual-column and dual-sprayer LC-MS system for high-throughput proteomic analyses. This system consists of two precolumns for sample desalting and two analytical columns. Each column is terminated by a nanoelectrospray emitter mounted on a robotic arm enabling their sequential positioning in front of the sampling cone of the mass spectrometer. The effluent from each emitter is recorded in separate acquisition channels without detectable crosstalk. Gradient elution to both nanoLC columns is delivered by a single HPLC system via a flow splitter. The reproducibility of retention time and peak intensity of the present multiplex system were comparable to those obtainable using a single emitter configuration. Replicate injections of complex tryptic digests (n = 10) indicated that this system provided good reproducibility of retention time and peak intensity on both columns with RSD values of less than 0.9 and 18.6%, respectively. The application of this system is demonstrated for the monitoring of protein expression changes in U937 human monocyte cells with and without phorbol ester administration. Furthermore, we also demonstrated the use of this multiplex system in a 2-D LC configuration to increase sample loading and throughput for the analysis of biomarker samples of higher complexity. Variations in peptide abundance down to two-fold change were identified across salt fractions for spiked tryptic digests present at a level of 50 fmol in 1.5 microg of plasma samples.

Enhanced Characterization of Complex Proteomic Samples Using LC−MALDI MS/MS: Exclusion of Redundant Peptides from MS/MS Analysis in Replicate Runs

Due to the complexity of proteome samples, only a portion of peptides and thus proteins can be identified in a single LC-MS/MS analysis in current shotgun proteomics methodologies. It has been shown that replicate runs can be used to improve the comprehensiveness of the proteome analysis; however, high-intensity peptides tend to be analyzed repeatedly in different runs, thus reducing the chance of identifying low-intensity peptides. In contrast to commonly used online ESI-MS, offline MALDI decouples the separation from MS acquisition, thus allowing in-depth selection for specific precursor ions. Accordingly, we extended a strategy for offline LC-MALDI MS/MS analysis using a precursor ion exclusion list consisting of all identified peptides in preceding runs. The exclusion list eliminated redundant MS/MS acquisitions in subsequent runs, thus reducing MALDI sample depletion and allowing identification of a larger number of peptide identifications in the cumulative dataset. In the analysis of the digest of an Escherichia coli lysate, the exclusion list strategy resulted in a 25% increase in the number of unique peptide identifications in the second run, in contrast to simply pooling MS/MS data from two replicate runs. To reduce the increased LC analysis time for repeat runs, a four-column multiplexed LC system was developed to carry out separation simultaneously. The multiplexed LC-MALDI MS provides a high-throughput platform to utilize the exclusion list strategy in proteome analysis.

Desorption Electrospray Ionization Mass Spectrometry for High-Throughput Analysis of Pharmaceutical Samples in the Ambient Environment

Desorption electrospray ionization (DESI) allows mass spectrometry to be used for on-line high-throughput monitoring of pharmaceutical samples in the ambient environment, without prior sample preparation. Positive and negative ion DESI are used to characterize the active ingredients in pharmaceutical samples formulated as tablets, ointments, and liquids. Compounds of a wide variety of chemical types are detected in these complex matrices. The effects on analytical performance of operating parameters, including the electrospray high voltage, heated capillary temperature, solvent infusion rate, and solvent composition, are evaluated and optimized. In addition to experiments in which a simple solvent is sprayed onto the solid analyte samples, reactive desorption is performed by adding reagents to the solvent spray to generate particularly stable or characteristic ions with the analytes of interest. A variable-speed moving belt was built for high-throughput sampling and used to provide rapid qualitative and semiquantitative information on drug constituents in tablets. Sampling rates as high as 3 samples/s are achieved in the ambient environment. Relative standard deviations of the relative ion abundances for major components in the mass spectra are in the range of 2-8%. Impurities and components present at levels as low as approximately 0.1% are identified and carryover effects are minimized in high-throughput on-line analysis of pharmaceutical samples.

Quantitation in capillary electrophoresis-mass spectrometry

CE-MS has evolved into a strong alternative to LC-MS. Most of CE-MS applications deal with characterization and identification. However, quantitative aspects have gained importance in, e.g., pharmaceutical and biotechnological applications. Here we summarize and evaluate various methodological aspects in order to achieve sensitive and reproducible results. Similar to LC-MS, aspects of matrix influence on the electrospray process need to be carefully addressed when quantitative results are intended by CE-MS. Due to a more complicated coupling special emphasis needs to be put on the CE-MS interface. Generally linearity over more than three orders of magnitude can be achieved by CE-ESI-MS. Furthermore, a literature survey has been performed in order to give an overview over quantitative measurements performed by CE-MS. The precision can be doubled when changing from a structural related to an isotopically labeled internal standard. Thus a level of precision better than 5% RSD can be achieved.

Description and Validation of a Four-Channel Staggered LC−MS/MS System for High-Throughput in Vitro Screens

A parallel four-channel LC-MS/MS system for quantitative high-throughput in vitro screens is described. The system comprises four pumps, a four-valve autosampler equipped with a nine-port stream selector valve, and a triple quadrupole mass spectrometer. Staggered injections across the sample list are performed by four injector valves onto separate columns in such a manner that the chromatographic window of interest is always eluting from one of the columns into the mass spectrometer. To demonstrate the applicability of the system, three different compounds (verapamil, propanolol, dextromethorphan) were analyzed. The results showed that the sample throughput could be increased more than three times in comparison with a conventional single-column LC-MS/MS system. Validation results for the three compounds showed an accuracy of 85.0-108%, a precision (given as relative standard deviation) of 2.60-10.7%, and a carryover of less than 0.1%.

High throughput screening via mass spectrometry: a case study using acetylcholinesterase

Mass spectrometry-based screening can be applied to a wide range of targets, including those intractable targets that use substrates such as lipids, fatty acids, phospholipids, steroids, prostaglandins, and other compounds not generally amenable to conventional screening techniques. The major limitation to this approach is throughput, making HTS via mass spectrometry impractical. We present a mass spectrometry-based technique and hardware for lead discovery applications. Mass spectrometry enables the design of label-free assays using biologically native substrates for a wide range of enzymatic targets. This system can be used for the direct quantification of analytes in complex reaction mixtures with typical throughputs of 4-5 s per sample. A mass spectrometry-based assay was developed to identify inhibitors of acetylcholinesterase, an enzyme with clinical importance in Alzheimer's disease. The system was used to screen a small chemical library. Several potent inhibitors were identified, and the IC(50) values of the inhibitors were determined.

Use of a five-channel multiplexed electrospray quadrupole time-of-flight hybrid mass spectrometer for metabolite identification

Metabolism data provided with reduced cycle time has become of increasing importance for the early evaluation of DMPK properties of drugs in discovery. In this regard, quadrupole time-of-flight hybrid mass spectrometers (Q-TOF) can provide very reliable metabolite identification via accurate mass measurement of ions and the consequent access to the elemental composition of the metabolite. However, due to their cost, they are often used for drug metabolism studies on later stage drug candidates or to address challenging metabolism questions. A new prototype, consisting of a five-channel multiplexed electrospray ionization (ESI) source on a Q-TOF with one channel used for lock-mass compound infusion, was evaluated for metabolite identification. The goal was to increase the sample throughput of a single ESI-MS system by a factor of 4, while maintaining efficient metabolite separation in high-performance liquid chromatography (HPLC) as well as adequate sensitivity and mass accuracy, and ultimately improve the speed and quality of metabolism studies supporting drug discovery. The analytical performance of the system was assessed by evaluating the sensitivity and mass accuracy (using real in vitro and in vivo samples), inter-channel differences in retention times, MS/UV response, and cross-talk among channels. The sensitivity using the multiplexed ESI source was on average 2-fold lower than with single ESI, correlating well with previous literature data. The mass accuracy was comparable to that obtained using single ESI in both MS and MS/MS modes, making the metabolite identification process using the multiplexed ESI source as reliable as with single ESI. Compound-dependent differences in ionization efficiencies were observed among channels, and were minimized by analyzing related samples on the same channel. Finally, the level of cross-talk among channels was acceptable (around 0.3%) and comparable to levels previously published for quantitative applications using multiplexed ESI. The paper also focuses on the advantages and disadvantages of this new approach compared to other approaches in the literature in the field of metabolite identification.

Multidimensional separations in the pharmaceutical arena

The introduction of novel, powerful and rapid multidimensional separation and characterization methods has produced revolutionary global changes at the genome, proteome and metabolome level, bringing about a radical transition in our views of living systems, at the molecular level. The age of proteomics and metabolomics demands high-resolution multidimensional separation techniques. Multidimensional gas and liquid chromatography techniques, in addition to capillary and microchip electrophoresis methods, offer increased resolution and sensitivity, while also affording adequate throughput and reproducibility to meet the demands of the modern pharmaceutical industry. Coupled with MS, these techniques provide not only separation but also reliable identification of the sample components. The resolving power of these methods has proved to be superior over individual one-dimensional approaches, enabling the comprehensive separation of complex biological mixtures, with excellent resolution and reproducibility. High capacity computer systems that are capable of rigorous qualitative and quantitative analysis of the separation profiles allow the establishment and mining of large databases. Examples of various modern multidimensional separation techniques, and their integration with MS, are reviewed, here, with respect to pharmaceutical analysis.

Automatic mass spectrometry method development for drug discovery: application in metabolic stability assays

High-throughput metabolic screening has been requested routinely to keep pace with high-throughput organic synthesis. Liquid chromatography/tandem mass spectrometry (LC/MS/MS) with a fast gradient has become the method of choice for the task due to its sensitivity and selectivity. We have developed an automated system that consists of a robotic system for in vitro incubation and a commercially available software package for automatic MS/MS method development. A short, generic LC gradient and MS conditions that are applicable to most compounds have been developed to minimize the method development time and data analysis. This system has been used to support a number of in vitro screening assays in early drug discovery phase including microsomal stability and protein binding.

Integrated high capacity solid phase extraction-MS/MS system for pharmaceutical profiling in drug discovery

A method is described for use in analysis of samples from pharmaceutical profiling of early drug discovery compounds. The method consists of a high capacity autosampler which injects samples into one of two solid phase extraction columns operated in parallel for alternating trapping, washing and elution into a tandem quadrupole mass spectrometer operated in multiple reaction monitoring (MRM) MS/MS mode. A primary method, which is useful for 80-90% of compounds, and a secondary method, which is useful for a majority of the remaining compounds, are described. No analytical HPLC column is used and the analysis rate is approximately 50 samples/h. Specificity is obtained using MRM analysis. Application of the method for high capacity analysis of metabolic stability samples is described.

Performance of an ultra-low elution-volume 96-well plate: drug discovery and development applications

Recently, sample preparation has been considered to be the major cause of bottlenecks during high-throughput analysis. With the assistance of robotic liquid handlers and the 96-well plate format, more samples can be prepared for subsequent liquid chromatography/tandem mass spectrometry (LC/MS/MS) analysis. Protein precipitation is still widely used despite potential loss of sensitivity or variable results due to ion suppression. The use of solid-phase extraction (SPE) clearly gives superior results but may not be as cost effective as protein precipitation due to the labor and material costs associated with the process. Here, a novel 96-well SPE plate is described that was designed to minimize the elution volume required for quantitative elution of analytes. The plate is packed with 2 mg of a high-capacity SPE sorbent that allows loading of up to 750 microL of plasma, while the novel design permits elution with as little as 25 microL. Therefore, the plate offers up to a 15-fold increase in sample concentration. The evaporation and reconstitution step that is typically required in SPE is avoided due to the concentrating ability of the plate. Examples of applications in drug discovery/development are shown and results are compared to protein precipitation. Excellent sensitivity and linearity are demonstrated.

Higher-throughput screening for Caco-2 permeability utilizing a multiple sprayer liquid chromatography/tandem mass spectrometry system

In the current drug discovery environment, higher-throughput analytical assays have become essential to keep pace with the screening demands for drug metabolism and pharmacokinetics (DMPK) attributes. This has been dictated by advances primarily in chemical procedures, notably combinatorial and parallel syntheses, which has resulted in many-fold increases in the number of compounds requiring DMPK evaluation. Because of its speed and specificity, liquid chromatography/tandem mass spectrometry (LC/MS/MS) has become the dominant technology for sample analysis in the DMPK screening assays. For higher-throughput assays, analytical speed as well as other factors such as method development, data processing, quality control, and report generation, must be optimized. The four-way multiplexed electrospray interface (MUX), which allows for the analysis of four LC eluents simultaneously, has been adopted to maximize the rate of sample introduction into the mass spectrometer. Generic fast-gradient HPLC methods that are suitable for approximately 80% of the new chemical entities encountered have been developed. In-house-written software programs have been used to streamline information flow within the system, and for quality control by automatically identifying analytical anomalies. By integrating these components together with automated method development and data processing, a system capable of screening 100 compounds per week for Caco-2 permeability has been established.