Immobilized particle arrays: coalescence of planar- and suspension-array technologies

Cell Microarray Technologies for High-Throughput Cell-Based Biosensors

Due to the recent demand for high-throughput cellular assays, a lot of efforts have been made on miniaturization of cell-based biosensors by preparing cell microarrays. Various microfabrication technologies have been used to generate cell microarrays, where cells of different phenotypes are immobilized either on a flat substrate (positional array) or on particles (solution or suspension array) to achieve multiplexed and high-throughput cell-based biosensing. After introducing the fabrication methods for preparation of the positional and suspension cell microarrays, this review discusses the applications of the cell microarray including toxicology, drug discovery and detection of toxic agents.

Facile and High-Throughput Synthesis of Functional Microparticles with Quick Response Codes

Encoded microparticles are high demand in multiplexed assays and labeling. However, the current methods for the synthesis and coding of microparticles either lack robustness and reliability, or possess limited coding capacity. Here, a massive coding of dissociated elements (MiCODE) technology based on innovation of a chemically reactive off-stoichimetry thiol-allyl photocurable polymer and standard lithography to produce a large number of quick response (QR) code microparticles is introduced. The coding process is performed by photobleaching the QR code patterns on microparticles when fluorophores are incorporated into the prepolymer formulation. The fabricated encoded microparticles can be released from a substrate without changing their features. Excess thiol functionality on the microparticle surface allows for grafting of amine groups and further DNA probes. A multiplexed assay is demonstrated using the DNA-grafted QR code microparticles. The MiCODE technology is further characterized by showing the incorporation of BODIPY-maleimide (BDP-M) and Nile Red fluorophores for coding and the use of microcontact printing for immobilizing DNA probes on microparticle surfaces. This versatile technology leverages mature lithography facilities for fabrication and thus is amenable to scale-up in the future, with potential applications in bioassays and in labeling consumer products.

Functionalized Polymer Microgel Particles Enable Customizable Production of Label-Free Sensor Arrays

Probe molecule immobilization onto surfaces is a critical step in the production of many analytical devices, including labeled and label-free microarrays. New methods to increase the density and uniformity of probe deposition have the potential to significantly enhance the ultimate limits of detection and reproducibility. Hydrogel-based materials have been employed in the past to provide a 3D protein-friendly surface for deposition of antibodies and nucleic acids. However, these methods are susceptible to variation during polymerization of the hydrogel scaffold and provide limited opportunities for tuning deposition parameters on an antibody-by-antibody basis. In this work, a versatile hydrogel nanoparticle deposition method was developed for the production of label-free microarrays and tested in the context of antibody-antigen binding. Poly(N-isopropylacrylamide) nanoparticles (PNIPAM) were conjugated to antibodies using an avidin/biotin system and deposited onto surfaces using a noncontact printing system. After drying, these gel spots formed uniform and thin layers <10 nm in height. The conjugates were characterized with dynamic light scattering, scanning electron microscopy, and atomic force microscopy. We tested this format in the context of tumor necrosis factor-alpha (TNF-α) detection via arrayed imaging reflectometry (AIR), a label-free protein microarray method. This method of probe molecule deposition should be generally useful in the production of microarrays for label-free detection.

Mass transfer in the biomolecular binding of a target against probe molecules on the surface of microbeads sequestered in wells in a microfluidic cell

Diagnostic tools which screen the binding interactions of a protein target against a display of biomolecular probes to identify molecules which bind the target are central to cell proteomic studies, and to diagnostic assays. Here, we study a microfluidic design for screening interactions in which the probe molecules are hosted on microbeads sequestered in wells arranged at the bottom of a microfluidic flow channel. Assays are undertaken by streaming an analyte solution with a fluorescently labelled target through the cell, and identifying the fluorescing beads. Numerical simulations are first constructed for the analyte flow over the microbeads in the well array, and the increase in the target concentration on the microbead surface. The binding profile is expressed as a function of the ratio of the convective to the diffusive transport rates (Peclet number or Pe), and the ratio of the kinetic to the diffusive rates (Damkohler number, Da). For any Pe, as Da becomes small enough, the transport is determined by the intrinsic kinetic binding rate. As Pe increases, a thin concentration boundary layer develops over the top surface of the microbead because of the convective flow, and target binds more rapidly. However, the relatively stagnant layers of liquid in the well provide a diffusion barrier which slows the target transport, and for any Da and Pe the transport is slower than equivalent patches of probes arranged on the channel wall. Experiments are also undertaken at high Pe, using the binding of fluorescently labelled NeutrAvidin as a target to probes of its binding partner, biotin, on the microbead surface. The binding profile is compared to the simulations to measure the kinetic rate constant, and this comparison shows that the transport in the cell is not kinetically limited because of the diffusion barriers created by the stagnant liquid layer in the well. Simulations and experiments on microbeads which are only partially recessed in the well demonstrate an increase in the mass transfer rate as more of the microbead surface intersects the flow and the diffusion limitation due to the stagnant layer of liquid surrounding the bottom part of the microbead is minimized.

A lipobead microarray assembled by particle entrapment in a microfluidic obstacle course and used for the display of cell membrane receptors

Platforms which can display cell membrane ligands and receptors as a microarray library of probes for screening against a target are essential tools in drug discovery, biomarker identification, and pathogen detection. Membrane receptors and ligands require their native bilayer environment to retain their selectivity and binding affinity, and this complicates displaying them in a microarray platform. In this study, a design is developed in which the probes are first incorporated in supported lipid bilayers formed around micron-sized particles (lipobeads), and the microbeads themselves are then arrayed on a surface by hydrodynamic capture in a microfluidic obstacle course of traps. The traps are "V" shaped open enclosures, which are arranged in a wide channel of a microfluidic device, and capture the lipobeads (slightly smaller than the channel height) as they are streamed through the course. Screening assays are undertaken directly in the device after assembly, by streaming a fluorescently labeled target through the device and detecting the bead fluorescence. Conditions are first established for which the supported bilayers on the bead surface remain intact during the capture and assay steps, using fluorescent tags in the bilayer to infer bilayer integrity. Numerical calculations of the hydrodynamic drag coefficient on the entrapped beads are presented in conjunction with the stability experiments to develop criteria for the bilayer stability as a function of the screening assay perfusion rate. Simulations of the flow streamlines are also presented to quantify the trapping efficiency of the obstacle course. Screening assays are illustrated, assaying fluorescently labeled NeutrAvidin with biotin, and labeled cholera toxin with its ganglioside binding ligand, GM1. Sequential capturing of sets of lipobeads (one at a time, and with each set bearing a different probe), followed by indexing the bead positions after each set is entrapped, allows for the construction of an indexed array of multiple probes without the need for particle encoding and is illustrated using the NeutrAvidin-biotin pair. Finally, the lipobead platform is used for quantitatively measuring the kinetic rate constants for the binding of a probe (biotin) to a target (NeutrAvidin).

A highly versatile microscope imaging technology platform for the multiplex real-time detection of biomolecules and autoimmune antibodies

The analysis of different biomolecules is of prime importance for life science research and medical diagnostics. Due to the discovery of new molecules and new emerging bioanalytical problems, there is an ongoing demand for a technology platform that provides a broad range of assays with a user-friendly flexibility and rapid adaptability to new applications. Here we describe a highly versatile microscopy platform, VideoScan, for the rapid and simultaneous analysis of various assay formats based on fluorescence microscopic detection. The technological design is equally suitable for assays in solution, microbead-based assays and cell pattern recognition. The multiplex real-time capability for tracking of changes under dynamic heating conditions makes it a useful tool for PCR applications and nucleic acid hybridization, enabling kinetic data acquisition impossible to obtain by other technologies using endpoint detection. The paper discusses the technological principle of the platform regarding data acquisition and processing. Microbead-based and solution applications for the detection of diverse biomolecules, including antigens, antibodies, peptides, oligonucleotides and amplicons in small reaction volumes, are presented together with a high-content detection of autoimmune antibodies using a HEp-2 cell assay. Its adaptiveness and versatility gives VideoScan a competitive edge over other bioanalytical technologies.

Hydrogel droplet microarrays with trapped antibody-functionalized beads for multiplexed protein analysis

Antibody microarrays are a powerful tool for rapid, multiplexed profiling of proteins. 3D microarray substrates have been developed to improve binding capacity, assay sensitivity, and mass transport, however, they often rely on photopolymers which are difficult to manufacture and have a small pore size that limits mass transport and demands long incubation time. Here, we present a novel 3D antibody microarray format based on the entrapment of antibody-coated microbeads within alginate droplets that were spotted onto a glass slide using an inkjet. Owing to the low concentration of alginate used, the gels were highly porous to proteins, and together with the 3D architecture helped enhance mass transport during the assays. The spotting parameters were optimized for the attachment of the alginate to the substrate. Beads with 0.2 µm, 0.5 µm and 1 µm diameter were tested and 1 µm beads were selected based on their superior retention within the hydrogel. The beads were found to be distributed within the entire volume of the gel droplet using confocal microscopy. The assay time and the concentration of beads in the gels were investigated for maximal binding signal using one-step immunoassays. As a proof of concept, six proteins including cytokines (TNFα, IL-8 and MIP/CCL4), breast cancer biomarkers (CEA and HER2) and one cancer-related protein (ENG) were profiled in multiplex using sandwich assays down to pg mL(-1) concentrations with 1 h incubation without agitation in both buffer solutions and 10% serum. These results illustrate the potential of beads-in-gel microarrays for highly sensitive and multiplexed protein analysis.

Microarrays made easy: biofunctionalized hydrogel channels for rapid protein microarray production

We present a simple, inexpensive, and sensitive technique for producing multiple copies of a hydrogel-based protein microarray. An agarose block containing 25 biofunctionalized channels is sliced perpendicularly to produce many identical biochips. Each microarray consists of 500 μm spots, which contain protein-coated microparticles physically trapped in porous SeaPrep agarose. Proteins diffuse readily through SeaPrep agarose, while the larger microparticles are immobilized in the hydrogel matrix. Without major assay optimization, the limit of detection is 12 pM for a sandwich assay detecting human IgG. These highly flexible, multiplexed arrays can be produced rapidly without any special instrumentation and are compatible with standard fluorescence-based read-out.

Multilayers of hydrogels loaded with microparticles: a fast and simple approach for microarray manufacturing

We present a novel and simple approach towards the creation of arrays of biomolecules for the multiplexed detection of biological interactions. Microarrays were obtained by cutting stacked layers of biofunctionalized polystyrene particle layers embedded in a permeable agarose matrix. Microparticles were therefore the vehicles for biorecognition. The three-dimensional constructs were obtained by consecutive dipping steps in a pre-gel solution. Our strategy enables the rapid manufacturing of a large number of array copies in a flexible manner and without any specialized instrumentation. Model binding assays for the detection of rabbit and mouse IgG were performed as a proof of concept using a fluorescence microscope for read-out. The limits of detection were in the low picomolar range for the sandwich assay while 1 IgG out of 50,000 background proteins could be detected in a reverse phase assay. Thus, without any assay optimization, sensitivities comparable to the ones usually observed for standard fluorescence-based assays were achieved with the particle/hydrogel array.

Protein Microarrays for the Detection of Biothreats

Although protein microarrays have proven to be an important tool in proteomics research, the technology is emerging as useful for public health and defense applications. Recent progress in the measurement and characterization of biothreat agents is reviewed in this chapter. Details concerning validation of various protein microarray formats, from contact-printed sandwich assays to supported lipid bilayers, are presented. The reviewed technologies have important implications for in vitro characterization of toxin–ligand interactions, serotyping of bacteria, screening of potential biothreat inhibitors, and as core components of biosensors, among others, research and engineering applications.

Microstructured layers of spherical biofunctional core-shell nanoparticles provide enlarged reactive surfaces for protein microarrays

Nanostructured core-shell particles with tailor-made affinity surfaces were used to generate microstructured affinity surfaces by microspotting the particles to form densely packed amorphous nanoparticle layers. These layers provided a large reactive surface for the specific binding of protein ligands from aqueous solution. Biofunctional core-shell particles were synthesized for this purpose that consisted of a silica core with a diameter of 100 nm and an organic shell a few nm thick. The nanoparticle core was prepared by sol-gel chemistry and the shell formed in suspension by organosilane chemistry. The shell provided amino groups or carbonyl groups at its outer surface for subsequent covalent immobilization of streptavidin, rabbit IgG antibodies or goat IgG antibodies. AlexaFluor 647-conjugated and biotinylated cytochrome C and CyDye-labeled anti-rabbit IgG and anti-goat IgG were probed as model analytes. The core-shell nanoparticles were spotted using a pin-ring micro-arrayer onto microscope glass slides that were coated with a polycation monolayer by dip-coating prior to nanoparticle deposition. Amorphous particle layers of well-defined thicknesses in the range of 100 nm to 2 microm were obtained by printing aqueous particle suspensions containing 5-500 mg/mL (0.5-50 wt%) of silica particles. The specific affinity of the plotted nanoparticulate capture surface was demonstrated by binding Cy3-labeled donkey anti-rabbit IgG and Cy5-labeled mouse anti-goat IgG to immobilized rabbit IgG and goat IgG particles. The signal intensity per spot increased for any given analyte concentration when the amount of particles per spot was augmented. This was attributed to the increasing integration of receptor molecules per surface footprint, which shifted the binding equilibrium towards the formation of the receptor-ligand complex. Additionally, the locally-increased supply of receptor molecules at the nanoparticulate microchip surface resulted in a wide dynamic range of 4 fM-20 nM (covering six orders of magnitude).

Fabrication and characterization of 3D hydrogel microarrays to measure antigenicity and antibody functionality for biosensor applications

We report the fabrication, characterization and evaluation of three-dimensional (3D) hydrogel thin films used to measure protein binding (antigenicity) and antibody functionality in a microarray format. Protein antigenicity was evaluated using the protein toxin, staphylococcal enterotoxin B (SEB), as a model on highly crosslinked hydrogel thin films of polyacrylamide and on two-dimensional (2D) glass surfaces. Covalent crosslinking conditions were optimized and quantified. Interrogation of the modified 3D hydrogel was measured both by direct coupling of a Cy5-labeled SEB molecule and Cy5-anti-SEB antibody binding to immobilized unlabeled SEB. Antibody functionality experiments were conducted using three chemically modified surfaces (highly crosslinked polyacrylamide hydrogels, commercially available hydrogels and 2D glass surfaces). Cy3-labeled anti-mouse IgG (capture antibody) was microarrayed onto the hydrogel surfaces and interrogated with the corresponding Cy5-labeled mouse IgG (antigen). Five different concentrations of Cy5-labeled mouse IgG were applied to each microarrayed surface and the fluorescence quantified by scanning laser confocal microscopy. Experimental results showed fluorescence intensities 3-10-fold higher for the 3D films compared to analogous 2D surfaces with attomole level sensitivity measured in direct capture immunoassays. However, 2D surfaces reported equal or greater sensitivity on a per-molecule basis. Reported also are the immobilization efficiencies, inter-and intra-slide variability and detection limits.

Quantitative protein profiling using antibody arrays

Traditional approaches to microarrays rely on direct binding assays where the extent of hybridisation and the signal detected are a measure of the analyte concentration in the experimental sample. This approach, directly imported from the nucleic acid field, may fail if applied to antibody-antigen interactions due to the shortage of characterised antibodies, the significant heterogeneity of antibody affinities, their dependence on the extent of protein modification during labelling and the inherent antibody cross-reactivity. These problems can potentially limit the multiplexing capabilities of protein affinity assays and in many cases rule out quantitative protein profiling using antibody microarrays. A number of approaches aimed at achieving quantitative protein profiling in a multiplex format have been reported recently. Of those reported, the three most promising routes include signal amplification, multicolour detection and competitive displacement approaches to multiplex affinity assays. One in particular, competitive displacement, also overcomes the problems associated with quantitation of affinity interactions and provides the most generic approach to highly parallel affinity assays, including antibody arrays.

Surface attachment of nanoparticles using oligonucleotides

Colloidal polymer particles are widely used in a variety of applications ranging from chromatography to surface modified bioreactors in protein arrays. In the present study, surface attachment of polystyrene particles to a polystyrene substrate has been performed using oligonucleotide hybridization. Thiolated complementary oligomers of cytosine and guanine have been covalently coupled to a pyridyl disulphide (PDS) modified polyethyleneglycol tether, forming part of a triblock copolymer which is adsorbed to the polystyrene surfaces via hydrophobic polypropylene oxide center blocks. The ability to withstand shear forces was studied using a laminar flow cell and the uptake of oligomers on the particles was quantified using two complementary techniques: UV-spectroscopy and sedimentation field flow fractionation. The possibility to tether particles in a flow cell suitable for practical use in e.g. a FIA-system is demonstrated.