Electrogenerated Chemiluminescence from Tris(2,2‘-bipyridyl)ruthenium(II) Immobilized in Titania−Perfluorosulfonated Ionomer Composite Films

Electrogenerated Chemiluminescence Coupled with Molecularly Imprinted Polymer for Sensitive and Selective Detection of N,N-Dimethyltryptamine

A simple and efficient approach that combined electrogenerated chemiluminescence (ECL) and molecularly imprinted polymers (MIPs) for selective and sensitive detection of the hallucinogenic drug N,N-dimethyltryptamine (DMT) was developed. ECL, one of the most sensitive analytical techniques for ultratrace analyte detection, offers the advantage of light-free spectroscopic analysis initiated by electrochemistry. MIPs, on the other hand, provide specific binding sites, allowing the target analyte to become selectively imprinted within the polymer matrix. In this study, an ECL coupled-MIP sensor was fabricated using para-aminobenzoic acid (p-ABA) as the monomer and DMT as the template molecule. The MIP was electropolymerized onto a glassy carbon electrode coated with a Nafion film entrapping [Ru(bpy)3]2+ species. Following elution, the imprinted sites were reoccupied by DMT, generating ECL signals in a phosphate buffered solution during anodic potential scanning. The ECL-MIP sensor demonstrated a wide dynamic range for DMT detection, from 0.5 to 300 μM, with an estimated detection limit of 0.5-1.0 μM (S/N = 3). The sensor's reproducibility, stability, and selectivity were also evaluated. Finally, density functional theory was employed to investigate the structure-property relationship of the p-ABA-DMT interaction. This work demonstrated the potential of ECL coupled with MIP technology for identifying structurally related molecules, achieving enhanced selectivity with a simple and cost-effective design.

Tris(2,2'-bipyridyl)ruthenium (II) complex as a universal reagent for the fabrication of heterogeneous electrochemiluminescence platforms and its recent analytical applications

In recent years, electrochemiluminescence (ECL) has received enormous attention and has emerged as one of the most successful tools in the field of analytical science. Compared with homogeneous ECL, the heterogeneous (or solid-state) ECL has enhanced the rate of the electron transfer kinetics and offers rapid response time, which is highly beneficial in point-of-care and clinical applications. In ECL, the luminophore is the key element, which dictates the overall performance of the ECL-based sensors in various analytical applications. Tris(2,2'-bipyridyl)ruthenium (II) complex, Ru(bpy)32+, is a coordination compound, which is the gold-standard luminophore in ECL. It has played a key role in translating ECL from a "laboratory curiosity" to a commercial analytical instrument for diagnosis. The aim of the present review is to provide the principles of ECL and classical reaction mechanisms-particularly involving the heterogeneous Ru(bpy)32+/co-reactant ECL systems, as well as the fabrication methods and its importance over solution-phase Ru(bpy)32+ ECL. Then, we discussed the emerging technology in solid-state Ru(bpy)32+ ECL-sensing platforms and their recent potential analytical applications such as in immunoassay sensors, DNA sensors, aptasensors, bio-imaging, latent fingerprint detection, point-of-care testing, and detection of non-biomolecules. Finally, we also briefly cover the recent advances in solid-state Ru(bpy)32+ ECL coupled with the hyphenated techniques.

One-Step Fabrication of Highly Sensitive Tris(2,2'-bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence Sensor Based on Graphene-Titania-Nafion Composite Film

A highly sensitive tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) electrogenerated chemiluminescence (ECL) sensor based on a graphene-titania-Nafion composite film has been prepared in a simple one-step manner. In the present work, a highly concentrated 0.1 M Ru(bpy)₃²⁺ solution was mixed with an as-prepared graphene-titania-Nafion composite solution (1:20, v/v), and then a small aliquot (2 µL) of the resulting mixture solution was cast on a glassy carbon electrode surface. This one-step process for the construction of an ECL sensor shortens the fabrication time and leads to reproducible ECL signals. Due to the synergistic effect of conductive graphene and mesoporous sol-gel derived titania-Nafion composite, the present ECL sensor leads to a highly sensitive detection of tripropylamine from 1.0 × 10⁻⁸ M to 2.0 × 10⁻³ M with a detection limit of 0.8 nM (S/N = 3), which is lower in comparison to that of the ECL sensor based on the corresponding ECL sensor based on the titania-Nafion composite containing carbon nanotube. The present ECL sensor also shows a good response for nicotinamide adenine dinucleotide hydrogen (NADH) from 1.0 × 10⁻⁶ M to 1.0 × 10⁻³ M with a detection limit of 0.4 µM (S/N = 3). Thus, the present ECL sensor can offer potential benefits in the development of dehydrogenase-based biosensors.

Research Progress on Catalytic Water Splitting Based on Polyoxometalate/Semiconductor Composites

In recent years, due to the impact of global warming, environmental pollution, and the energy crisis, international attention and demand for clean energy are increasing. Hydrogen energy is recognized as one of the clean energy sources. Water is considered as the largest potential supplier of hydrogen energy. However, artificial catalytic water splitting for hydrogen and oxygen evolution has not been widely used due to its high energy consumption and high cost during catalytic cracking. Therefore, the exploitation of photocatalysts, electrocatalysts, and photo-electrocatalysts for rapid, cost effective, and reliable water splitting is essentially needed. Polyoxometalates (POMs) are regarded as the potential candidates for water splitting catalysis. In addition to their excellent catalytic properties and reversibly redox activities, POMs can also modify semiconductors to overcome their shortcomings, and improve photoelectric conversion efficiency and photocatalytic activity, which has attracted more and more attention in the field of photoelectric water splitting catalysis. In this review, we summarize the latest applications of POMs and semiconductor composites in the field of photo-electrocatalysis (PEC) for hydrogen and oxygen evolution by catalytic water splitting in recent years and take the latest applications of POMs and semiconductor composites in photocatalysis for water splitting. In the conclusion section, the challenges and strategies of photocatalytic and PEC water-splitting by POMs and semiconductor composites are discussed.

Electrogenerated chemiluminescence aptasensor for lysozyme based on copolymer nanospheres encapsulated black phosphorus quantum dots

Black phosphorus quantum dots (BPQDs) can react with Ru(bpy)₃²⁺ to generate strong anodic electrogenerated chemiluminescence (ECL). However, the instability and the lack of functional groups on BPQDs limit its further application in the fabrication of ECL biosensor. In the present work, uniform BPQDs-styrene-acrylamide (St-AAm) nanospheres (BSAN) are synthesized by encapsulating BPQDs into St-AAm copolymer nanospheres. Sufficient amount of BPQDs can be embedded into nanospheres, and react with Ru(bpy)₃²⁺ to generate strong anodic ECL which is comparable to that of pure BPQDs. Amino group of polymer endows BPQDs the ability to connect with DNA, and can be used to fabricate ECL aptasensor for the sensitive detection of lysozyme. The proposed aptasensor shows high sensitivity, good selectivity and stability for the detection of lysozyme in the range of 0.1-100 pg mL^-1 with a detection limit of 0.029 pg mL^-1 (3σ). The proposed method reveals the promising ECL sensing application of BP nanomaterials in the detection of various proteins.

Electrogenerated chemiluminescence of Ru(bpy)32+at a black phosphorus quantum dot modified electrode and its sensing application

Strong anodic electrogenerated chemiluminescence (ECL) of Ru(bpy)₃²⁺can be obtained under neutral conditions at a black phosphorus quantum dot (BPQD) modified electrode due to the catalytic effect of BPQDs. Dopamine exhibits an apparent inhibiting effect on the ECL signal, and as a result, can be sensitively detected.

Immobilised Electrocatalysts: Nafion Particles Doped with Ruthenium(II) Tris(2,2'-bipyridyl)

Nafion particles doped with ruthenium(II) tris(2,2'-bipyridyl) are synthesized by using a re-precipitation method. Characterization including SEM sizing and quantification of Ru(bpy)₃²⁺ in the Nafion particles using UV/Vis spectroscopy was conducted. The synthesized Ru-Nafion particles were investigated electrochemically at both ensemble and single particle levels. Voltammetry of the drop-cast Ru-Nafion particles evidences the successful incorporation of Ru(bpy)₃²⁺ into the Nafion particle but only a small fraction of the incorporated Ru(bpy)₃²⁺ was detected due at least in part to the formation of the likely agglomerated and irregular "mat" associated with the dropcast technique. In contrast, nano-impact experiments provided a quantitative determination of the amount of Ru(bpy)₃²⁺ in single Ru-Nafion particles. Finally, oxidation of solution-phase oxalate mediated by Ru(bpy)₃²⁺ within individual Nafion particles was observed, showing the electrocatalytic properties of the Ru-Nafion particles.

Electrogenerated Chemiluminescence Resonance Energy Transfer between Ru(bpy)3(2+) Electrogenerated Chemiluminescence and Gold Nanoparticles/Graphene Oxide Nanocomposites with Graphene Oxide as Coreactant and Its Sensing Application

In the present work, strong anodic electrogenerated chemiluminescence (ECL) of Ru(bpy)3(2+) was observed at a graphene oxide modified glassy carbon electrode (GO/GCE) in the absence of coreactants. The electrocatalytical effect of GO on the oxidation of Ru(bpy)3(2+) suggested that GO itself can act as the coreactant of Ru(bpy)3(2+) ECL, which can be used to fabricate the ECL biosensor. Thiol group terminated adenosine triphosphate (ATP) aptamer was immobilized on the GO film via DNA hybridization. When gold nanoparticles/graphene oxide (AuNPs/GO) nanocomposites were modified on the aptamer through the S-Au bond to form a sandwich-like structure, the ECL resonance energy transfer (ECL-RET) could occur between Ru(bpy)3(2+) and AuNPs/GO nanocomposites, resulting in an apparent decrease of ECL signal. After the ECL sensor was incubated in ATP solution, the AuNPs/GO nanocomposites were released from the electrode due to the specific interaction between aptamer and ATP, leading to the increased ECL signal. On the basis of these results, an ECL aptasensor was fabricated and could be used in the sensitive and selective detection of ATP in the range of 0.02-200 pM with a detection limit of 6.7 fM (S/N = 3). The proposed ECL aptasensor can be applied in the detection of ATP in real samples with satisfactory results.

Graphene-Ruthenium(II) complex composites for sensitive ECL immunosensors

Non-covalent modification method has been proven as an effective strategy for enhancing the chemical properties of graphene while the structure and electronic properties of graphene can be retained. This work describes a novel strategy to fabricate a solid-state electrochemiluminescent (ECL) immunosensor based on ruthenium(II) complex/3,4,9,10-perylenetetracarboxylic acid (PTCA)/graphene nanocomposites (Ru-PTCA/G) for sensitive detection of α-fetoprotein (AFP). It is found that immobilization of PTCA and reduction of GO can be simultaneously achieved in one-pot synthesis method under alkaline condition and moderate temperature, forming PTCA/G nanocomposites. Further covalent attachment of ruthenium(II) complex to the PTCA assembled on graphene sheets produces the functional Ru-PTCA/G nanocomposites which show good electrochemical activity and ca. 21 times higher luminescence quantum efficiency than the adsorbed derivative ruthenium(II) complex. The Ru-PTCA/G nanocomposites based solid-state ECL sensor exhibits high stability toward the determination of tripropylamine (TPA) coreactant. In addition, a new ECL immunosensor based on steric hindrance effect is fabricated by cross-linking α-fetoprotein antibody (anti-AFP) with chitosan covered on Ru-PTCA/G composites modified electrode for detection of cancer biomarker AFP. This ECL immunosensor shows an extremely sensitive response to AFP in a linear range of 5 pg·mL(-1) -10 ng·mL(-1) with a detection limit of 0.2 pg·mL(-1) . The present approach is effective for various molecules immobilization and may become a promising technique for biomolecular detection.

Electrogenerated chemiluminescence detector based on Ru(bpy)3(2+) immobilized in cation exchange resin for high-performance liquid chromatography: An approach to stable detection

In this work, an electrogenerated chemiluminescence (ECL) detector with improved stability was developed for high-performance liquid chromatography (HPLC) detection of hydrochlorothiazide (HCTZ). The detector was prepared by packing cation exchanged resin particles in a glass tube, followed by inserting Pt wires (working electrode) in this tube and sealing. The leakage of Ru(bpy)3(2+) from the resin was compensated by adding a small amount of Ru(bpy)3(2+) in the mobile phase. Factors affected the performance of the proposed ECL detector were investigated. Under the optimal conditions, the ECL intensity has a linear relationship with the concentration of HCTZ in the range of 5.0 × 10(-8) g mL(-1)-2.5 × 10(-5) g mL(-1) and the detection limit was 2.0 × 10(-8) g mL(-1) (S/N=3). Application of the detector to the analysis of HCTZ in human serum proved feasible.

Sol-gel Approaches for Elaboration of Polyol Dehydrogenase-Based Bioelectrodes

This review describes the input of sol-gel chemistry to the immobilization of polyol dehydrogenases on electrodes, for applications in bioelectrocatalysis. The polyol dehydrogenases are described and their application for biosensing, biofuel cell and electrosynthesis are briefly discussed. The immobilization of proteins via sol-gel approaches is described, including a discussion on the difficulty to maintain the activity of proteins in a silica matrix and the strategies developed to offer a proper environment to the proteins by developing optimal organic-inorganic hybrid materials. Finally, the co-immobilization of the NAD + co-factor and of mediators for the elaboration of reagentless devices is presented, based on published and original data. All-in-all, sol-gel approaches appear to be a very promising for development of original electrochemical applications involving dehydrogenases in near future.

Dual-channel cathodic electrochemiluminescence of luminol induced by injection of hot electrons on a niobate semiconductor modified electrode

In this paper, a new niobate semiconductor photocatalyst Sr(0.4)H(1.2)Nb(2)O(6)·H(2)O (HSN) nanoparticle was applied to investigate the cathodic electrochemiluminescent (ECL) behavior of luminol for the first time. The results presented here demonstrated that there were two ECL peaks of luminol at the cathodic potential attributed to immobilization of HSN on the electrode surface. It is implied that HSN can be electrically excited and injected electrons into aqueous electrolytes from this electrode under a quite low potential that only excites luminol. A mechanism for this luminol-ECL system on HSN/GCE has been proposed. Additionally, this HSN/GCE has lots of advantages, such as high stability, good anti-interference ability, simple instrumentation, rapid procedure and ultrasensitive ECL response. It is envisioned that this HSN/GCE has further applications in biosensors.