Electrochemical protein chip with arrayed immunosensors with antibodies immobilized in a plasma-polymerized film

Bipolar Clark-Type Oxygen Electrode Arrays for Imaging and Multiplexed Measurements of the Respiratory Activity of Cells

Various miniature Clark-type oxygen electrodes (COEs), which are typically used to measure dissolved oxygen (DO) concentration in cellular respiration, have been developed since the 1980s. Arrays with individually addressable electrodes that constitute the sensor were used for various applications. However, the large number of leads and contact pads required for connecting the electrodes and the external instrument complicate the electrode layout and make the operation of integrated COE arrays challenging. Here, we fabricated closed bipolar electrochemical systems comprising 6 × 8 and 4 × 4 arrays of COEs for imaging and multiplexed detection. The cathodic compartment was sealed with a hydrophobic oxygen-permeable membrane to separate the internal electrolyte solution from the sample solutions. Using the bipolar Clark-type oxygen electrode (BCOE) arrays and electrochemiluminescence (ECL), we measured the DO concentration at each cathode. The results revealed that the ECL intensity changed linearly with the DO concentration. In addition, we used ECL imaging to investigate the respiratory activity of Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) in suspensions with different cell densities. The ECL images showed that the ECL intensity changed noticeably with the bacterial density. The bacterial respiratory activity was then qualitatively analyzed based on the ECL images acquired successively over a time duration. Further, we measured the antibiotic efficacy of piperacillin, oxacillin, gentamicin, and cefmetazole against E. coli and P. aeruginosa using the BCOE. We found that the ECL intensity increased with the antibiotic concentration, thus indicating the suppression of the bacterial respiratory activity.

Bipolar Electrode Arrays for Chemical Imaging and Multiplexed Sensing

Bipolar electrodes (BPEs) with arrays of cathodic and anodic poles were developed for use in closed bipolar systems. To increase the number of BPEs in the array, the anodic and cathodic poles were connected with each other using thin leads. A further increase in the number of BPEs was achieved by forming the cathodic and anodic poles of the BPEs and the leads in different layers. A device with 9 × 10 arrays of cathodes and anodes was thus realized. When using this device to sense hydrogen peroxide (H₂O₂), the sensitivity and linear range of calibration plots could be adjusted by changing the driving voltage and the area ratio between the cathodic and anodic poles. The devices were used to image H₂O₂ and obtain time-lapse images for the diffusion and dilution of H₂O₂. Furthermore, DNA detection was demonstrated using an electroactive intercalator. The sensitivity could be improved by making the anodic poles smaller with respect to the cathodic pole and concentrating the electrochemiluminescence (ECL) in a small area. The ECL intensity changed according to the target DNA concentration in the solution.

Nanochannel-driven rapid capture of sub-nanogram level biomarkers for painless preeclampsia diagnosis

Preeclampsia (PE) is a pregnancy-specific hypertensive syndrome recognized as the leading cause of maternal and fetal morbidity and mortality worldwide. Painful blood-collection procedures or low accuracy of non-invasive approaches require faster, patient-friendly, and more sensitive diagnostic technologies. Here we report a painless, highly sensitive detection platform using nanoporous microneedles (nMNs) that enables rapid capture of biomarkers present at sub-nanogram levels. The highly porous nanostructures on the nMN surface were prepared by anodization of aluminum MN and then functionalized by immobilization of capture antibodies to detect target biomarkers based on an immunoassay method. The immuno-functionalized nMN array demonstrated rapid capture of an estrogen (E2) biomarker for PE following a 1-min incubation and exhibited a concentration-dependent change in fluorescence intensity over the E2 range of 0.5 ng mL^-1 to 1000 ng mL^-1 after treatment with fluorescence-detection antibodies. Remarkably, the nMN patch selectively detected sub-nanogram-levels of E2 in subcutaneous interstitial fluid from rats with increased diagnostic accuracy as compared with commercial immunoassay kits. This bio-functionalized nMN platform showed improved biosensing capability for multiple PE-related biomarkers, including hormones and proteins. Furthermore, this painless method demonstrated efficacy as a point-of-need diagnostic platform using portable smartphone-based fluorescence microscope to obtain fluorescence images of biomarker-captured nMN arrays.

Enhancement of Fluorescence-Based Sandwich Immunoassay Using Multilayered Microplates Modified with Plasma-Polymerized Films

A functional modification of the surface of a 96-well microplate coupled with a thin layer deposition technique is demonstrated for enhanced fluorescence-based sandwich immunoassays. The plasma polymerization technique enabling the deposition of organic thin films was employed for the modification of the well surface of a microplate. A silver layer and a plasma-polymerized film were consecutively deposited on the microplate as a metal mirror and the optical interference layer, respectively. When Cy3-labeled antibody was applied to the wells of the resulting multilayered microplate without any immobilization step, greatly enhanced fluorescence was observed compared with that obtained with the unmodified one. The same effect could be also exhibited for an immunoassay targeting antigen directly adsorbed on the multilayered microplate. Furthermore, a sandwich immunoassay for the detection of interleukin 2 (IL-2) was performed with the multilayered microplates, resulting in specific and 88-fold–enhanced fluorescence detection.

A Potentiometric Addressable Photoelectrochemical Biosensor for Sensitive Detection of Two Biomarkers

It is a great challenge to fabricate multiplex and convenient photoelectrochemical biosensors for ultrasensitive determination of biomarkers. Herein, a fascinating potentiometric addressable photoelectrochemical biosensor was reported for double biomarkers' detection by varying the applied bias in the detection process. In this biosensor, the nanocomposite of cube anatase TiO₂ mesocrystals and polyamidoamine dendrimers modified a dual disk electrode as an excellent photoelectrochemical sensing matrix. Subsequently, two important biomarkers in serum for prostate cancer, prostate-specific antigen and human interleukin-6, were immobilized onto the different disks of modified electrode via glutaraldehyde bridges. Then another two photosensitizers, graphitic-carbon-nitride-labeled and CS-AgI-labeled different antibodies, were self-assembled onto the electrode surface by a corresponding competitive immune recognition reaction. The change in photocurrent with the target antigen concentration at different critical voltages enables us to selectively and quantitatively determine targets. The results demonstrated that this potentiometric addressable photoelectrochemical biosensing strategy not only has great promise as a new point-of-care diagnostic tool for early detection of prostate cancer but also can be conveniently expanded to multiplex biosensing by simply change biomarkers. More importantly, this work provides an unambiguous operating guideline of multiplex photoelectrochemical immunoassay.

Electrochemical detection of two tumor markers based on functionalized polypyrrole microspheres as immunoprobes

(A) represents the preparation of the labels and (B) represents the immunosensor preparation and detection principle.

Ultrasensitive simultaneous detection of four biomarkers based on hybridization chain reaction and biotin-streptavidin signal amplification strategy

A sandwich-type electrochemical immunosensor based on redox probe tags identification technology for ultrasensitive simultaneous detection of four antigens was proposed. In this project, well-distributed graphene/gold (GR-Au) hybrid film was acquired through one-step codeposition in an electrode surface and served as the base substrate for immobilizing capture antibodies (Ab1). Hybridization chain reaction (HCR) and biotin/streptavidin (B/SA), combining with gold magnetic nanoparticles were applied to increase the immobilization amount of signal tags in detection antibody (Ab2) bioconjugates. To verify this strategy, four representative biomarkers, a-fetoprotein (AFP), carcinoembryonic antigen (CEA), carbohydrate antigen (CA)125 and prostate special antigen (PSA), were used as model analytes. The resulting immunosensor could simultaneously detect four antigens in single-pass differential pulse voltammetry (DPV) scan, and exhibited obviously improved senstivity compared to previous similar immunosensors, displayed good linear relationships in the ranges from 0.2 to 800 pg/mL for AFP, 0.2 to 600 pg/mL for CEA, 0.2 to 1000 pg/mL for CA125, 0.2 to 800 pg/mL for PSA and with detection limits of 62, 48, 77 and 60 fg/mL, respectively.

Ultrasensitive electrochemical immunosensors for multiplexed determination using mesoporous platinum nanoparticles as nonenzymatic labels

An ultrasensitive multiplexed immunoassay method was developed at a disposable immunosensor array using mesoporous platinum nanoparticles (M-Pt NPs) as nonenzymatic labels. M-Pt NPs were prepared by ultrasonic method and employed to label the secondary antibody (Ab2) for signal amplification. The immunosensor array was constructed by covalently immobilizing capture antibody (Ab1) on graphene modified screen printed carbon electrodes (SPECs). After the sandwich-type immunoreactions, the M-Pt-Ab2 was bound to immunosensor surface to catalyze the electro-reduction of H2O2 reaction, which produced detectable signals for readout of analytes. Using breast cancer related panel of tumor markers (CA125, CA153 and CEA) as model analytes, this method showed wide linear ranges of over 4 orders of magnitude with the detection limits of 0.002 U mL(-1), 0.001 U mL(-1) and 7.0 pg mL(-1) for CA125, CA153 and CEA, respectively. The disposable immunosensor array possessed excellent clinical value in cancer screening as well as convenient point of care diagnostics.

Microfluidic chips for immunoassays

The use of microfluidic chips for immunoassays has been extensively explored in recent years. The combination of immunoassays and microfluidics affords a promising platform for multiple, sensitive, and automatic point-of-care (POC) diagnostics. In this review, we focus on the description of recent achievements in microfluidic chips for immunoassays categorized by their detection method. Following a brief introduction to the basic principles of each detection method, we examine current microfluidic immunosensor detection systems in detail. We also highlight interesting strategies for sensitive immunosensing configurations, multiplexed analysis, and POC diagnostics in microfluidic immunosensors.

Nanoparticle-enhanced sensitivity of a nanogap-interdigitated electrode array impedimetric biosensor

Interdigitated electrode (IDE) arrays with nanometer-scale gaps have been utilized to enhance the sensitivity of affinity-based detection. The geometry of nanogap IDEs was first optimized on the basis of simulations of the electric field and current density. It was determined that the gap (G) between the electrodes was the most important geometric parameter in determining the distribution and strength of the electric field and the current density compared to the width (W) and height (H) of the IDEs. Several devices were materialized and analyzed for their sensitivity to the electrochemical environment using faradic electrochemical impedance spectroscopy (EIS) as the detection technique. Nanogap optimized IDEs were then employed as biosensors for the label-free, affinity-based detection of antitissue transglutaminase antibodies (αtTG-Abs), a biomarker for the detection of autoimmune disorder celiac sprue, triggered by ingesting gluten. The label-free biosensor assay was found to be less sensitive compared to on-chip ELISA. Gold nanoparticles (GNPs) were then employed to improve the sensitivity of the nanogap IDE-based biosensor. With GNPs, the transducer sensitivity increased by 350% over that of label-free detection. The suitability of nanogap IDEs as biosensor transducers for EIS in label-free and GNP-labeled formats was established. The immunobiosensor assay detection sensitivity with the GNPs was found comparable to ELISA.

Measurement of biomarker proteins for point-of-care early detection and monitoring of cancer

This critical review evaluates progress toward viable point-of-care protein biomarker measurements for cancer detection and diagnostics. The ability to measure panels of specific, selective cancer biomarker proteins in physicians' surgeries and clinics has the potential to revolutionize cancer detection, monitoring, and therapy. The dream envisions reliable, cheap, automated, technically undemanding devices that can analyze a patient's serum or saliva in a clinical setting, allowing on-the-spot diagnosis. Existing commercial products for protein assays are reliable in laboratory settings, but have limitations for point-of-care applications. A number of ultrasensitive immunosensors and some arrays have been developed, many based on nanotechnology. Multilabel detection coupled with high capture molecule density in immunosensors and arrays seems to be capable of detecting a wide range of protein concentrations with sensitivity ranging into the sub pg mL(-1) level. Multilabel arrays can be designed to detect both high and ultralow abundance proteins in the same sample. However, only a few of the newer ultrasensitive methods have been evaluated with real patient samples, which is key to establishing clinical sensitivity and selectivity.

Sensitive electrochemical immunosensor for matrix metalloproteinase-3 based on single-wall carbon nanotubes

A novel electrochemical immunosensor for the detection of matrix metalloproteinase-3 (MMP-3), a cancer biomarker protein, based on vertically aligned single-wall carbon nanotube (SWCNT) arrays is presented. Detection was based on a sandwich immunoassay consisting of horseradish peroxidase (14-16 labels) conjugated to a secondary antibody and/or a polymer bead loaded with multi-enzyme labels. Performance was optimized by effective minimization of non-specific binding (NSB) events using Bovine serum albumin (BSA), Tween-20 and optimization of the primary antibody and secondary antibody concentrations. Results provided a detection limit of 0.4 ng mL(-1) (7.7 pM) for the 14-16 label sensor protocol and 4 pg mL(-1) (77 fM) using a multiply enzyme labeled polymeric bead amplification strategy in 10 microL of calf serum. This immunosensor based on SWCNT arrays offers great promise for a rapid, simple, cost-effective method for clinical screening of cancer biomarkers for point-of-care diagnosis.

Designing nanomaterial-enhanced electrochemical immunosensors for cancer biomarker proteins

Detection of multiple cancer biomarker proteins in human serum and tissue at point-of-care is a viable approach for early cancer detection, but presents a major challenge to bioanalytical device development. This article reviews recent approaches developed in our laboratories combining nanoparticle decorated electrodes and multilabeled secondary antibody labeled particles to achieve high sensitivity for the detection of cancer biomarker proteins. Two nanomaterial-based sensor platforms were used: (a) upright single wall carbon nanotube forests and (b) layers of densely packed 5 nm gold nanoparticles. Both platforms feature pendant carboxylate groups for easy attachment of enzymes or antibodies by amidization. In quality performance tests, the biocatalytic responses for determination of hydrogen peroxide of AuNP layers with attached horseradish peroxidase (HRP) on electrodes gave somewhat better detection limit and sensitivity than single wall carbon nanotube (SWNT) forest platforms with HRP attached. Evaluation of these sensors as platforms for sandwich immunoassays for cancer biomarker prostate specific antigen (PSA) in serum showed that both approaches gave accurate results for human serum samples from cancer patients. The best detection limit (0.5 pg mL(-1)) and sensitivity were obtained by combining the AuNP immunosensors with binding of 1 mum diameter magnetic particles decorated with secondary antibodies and 7500 HRP labels.

Evolving 'omics' technologies for diagnostics of head and neck cancer

Squamous cell carcinoma of head and neck (SCCHN) is the sixth most common malignancy and is a major cause of cancer morbidity and mortality worldwide. As with most solid cancers, the cure rate for SCCHN is excellent if tumors are diagnosed early in the course of the disease. Early diagnosis of cancer remains difficult because of the lack of specific symptoms in early disease as well as the limited understanding of etiology and oncogenesis. Advances in proteomics and genomics contribute to the understanding of the pathophysiology of neoplasia, cancer diagnosis and anticancer drug discovery. The powerful 'omics' technologies have opened new avenues towards biomarker discovery, identification of signaling molecules associated with cell growth, cell death, cellular metabolism and early detection of cancer. Analysis of tumor-specific omics profiles provided a unique opportunity to diagnose, classify, and detect malignant disease; to better understand and define the behavior of specific tumors; and to provide direct and targeted therapy. These technologies however still require integration and standardization of techniques and validation against accepted clinical and pathologic parameters. This article provides a summary of technologies, potential clinical applications, and challenges of omics in head and neck cancer.

Disposable Reagentless Electrochemical Immunosensor Array Based on a Biopolymer/Sol-Gel Membrane for Simultaneous Measurement of Several Tumor Markers

Background: A reagentless sensor array for simultaneous multianalyte testing (SMAT) may enable accurate diagnosis and be applicable for point-of-care testing. We developed a disposable reagentless immunosensor array for simple immunoassay of panels of tumor markers.

Methods: We carried out SMAT with a direct capture format, in which colloidal gold nanoparticles with bound horseradish peroxidase (HRP)-labeled antibodies were immobilized on screen-printed carbon electrodes with biopolymer/sol-gel to trap their corresponding antigens from sample solution. Upon formation of immunocomplex, the direct electrochemical signal of the HRP decreased owing to increasing spatial blocking, and the analytes could be simultaneously determined by monitoring the signal changes.

Results: The proposed reagentless immunosensor array allowed simultaneous detection of carcinoma antigen 153, carcinoma antigen 125, carbohydrate antigen 199, and carcinoembryonic antigen in clinical serum samples in the ranges of 0.4–140 kU/L, 0.5–330 kU/L, 0.8–190 kU/L, and 0.1–44 μg/L, respectively, with detection limits of 0.2 kU/L, 0.5 kU/L, 0.3 kU/L, and 0.1 μg/L corresponding to the signals 3 SD above the mean of a zero standard. The interassay imprecision of the arrays was <9.5%, and they were stable for 35 days. The positivity detection rate of panels of tumor markers was >95.5% for 95 cases of cancer-positive sera.

Conclusions: The immunosensor array provides a SMAT with short analytical time, small sampling volume, no need for substrate, and, no between-electrode cross-talk. This method not only proved the capability of the array in point-of-care testing, but also allowed simultaneous testing of several tumor markers.