NMR detection with multiple solenoidal microcoils for continuous-flow capillary electrophoresis

Multiplexing experiments in NMR and multi-nuclear MRI

Multiplexing NMR experiments by direct detection of multiple free induction decays (FIDs) in a single experiment offers a dramatic increase in the spectral information content and often yields significant improvement in sensitivity per unit time. Experiments with multi-FID detection have been designed with both homonuclear and multinuclear acquisition, and the advent of multiple receivers on commercial spectrometers opens up new possibilities for recording spectra from different nuclear species in parallel. Here we provide an extensive overview of such techniques, designed for applications in liquid- and solid-state NMR as well as in hyperpolarized samples. A brief overview of multinuclear MRI is also provided, to stimulate cross fertilization of ideas between the two areas of research (NMR and MRI). It is shown how such techniques enable the design of experiments that allow structure elucidation of small molecules from a single measurement. Likewise, in biomolecular NMR experiments multi-FID detection allows complete resonance assignment in proteins. Probes with multiple RF microcoils routed to multiple NMR receivers provide an alternative way of increasing the throughput of modern NMR systems, effectively reducing the cost of NMR analysis and increasing the information content at the same time. Solid-state NMR experiments have also benefited immensely from both parallel and sequential multi-FID detection in a variety of multi-dimensional pulse schemes. We are confident that multi-FID detection will become an essential component of future NMR methodologies, effectively increasing the sensitivity and information content of NMR measurements.

Integrated impedance sensing of liquid sample plug flow enables automated high throughput NMR spectroscopy

A novel approach for automated high throughput NMR spectroscopy with improved mass-sensitivity is accomplished by integrating microfluidic technologies and micro-NMR resonators. A flow system is utilized to transport a sample of interest from outside the NMR magnet through the NMR detector, circumventing the relatively vast dead volume in the supplying tube by loading a series of individual sample plugs separated by an immiscible fluid. This dual-phase flow demands a real-time robust sensing system to track the sample position and velocities and synchronize the NMR acquisition. In this contribution, we describe an NMR probe head that possesses a microfluidic system featuring: (i) a micro saddle coil for NMR spectroscopy and (ii) a pair of interdigitated capacitive sensors flanking the NMR detector for continuous position and velocity monitoring of the plugs with respect to the NMR detector. The system was successfully tested for automating flow-based measurement in a 500 MHz NMR system, enabling high resolution spectroscopy and NMR sensitivity of 2.18 nmol s^1/2 with the flow sensors in operation. The flow sensors featured sensitivity to an absolute difference of 0.2 in relative permittivity, enabling distinction between most common solvents. It was demonstrated that a fully automated NMR measurement of nine individual 120 μL samples could be done within 3.6 min or effectively 15.3 s per sample.

Taking compact NMR to monitoring real reactions in large-scale chemical industries-General considerations and learnings from a lab-scale test case

The considerations for use of compact nuclear magnetic resonance in a large-scale industrial environment clearly differ from those in academic and educational settings and even from those in smaller companies. In the first part of this article, these differences will be discussed along with the additional requirements that need to be fulfilled for successful applicability in different use cases. In the second part of the article, outcomes from different research activities aiming to fulfill these requirements will be presented with a focus on an online reaction-monitoring study on a lab-scale nucleophilic chlorination reaction.

Assessing 2D electrophoretic mobility spectroscopy (2D MOSY) for analytical applications

Electrophoretic displacement of charged entity phase modulates the spectrum acquired in electrophoretic NMR experiments, and this modulation can be presented via 2D FT as 2D mobility spectroscopy (MOSY) spectra. We compare in various mixed solutions the chemical selectivity provided by 2D MOSY spectra with that provided by 2D diffusion-ordered spectroscopy (DOSY) spectra and demonstrate, under the conditions explored, a superior performance of the former method. 2D MOSY compares also favourably with closely related LC-NMR methods. The shape of 2D MOSY spectra in complex mixtures is strongly modulated by the pH of the sample, a feature that has potential for areas such as in drug discovery and metabolomics. Copyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.

In vivo online magnetic resonance quantification of absolute metabolite concentrations in microdialysate

In order to study metabolic processes in animal models of diseases and in patients, microdialysis probes have evolved as powerful tools that are minimally invasive. However, analyses of microdialysate, performed remotely, do not provide real-time monitoring of microdialysate composition. Microdialysate solutions can theoretically be analyzed online inside a preclicinal or clinical MRI scanner using MRS techniques. Due to low NMR sensitivity, acquisitions of real-time NMR spectra on very small solution volumes (μL) with low metabolite concentrations (mM range) represent a major issue. To address this challenge we introduce the approach of combining a microdialysis probe with a custom-built magnetic resonance microprobe that allows for online metabolic analysis (¹H and ¹³C) with high sensitivity under continuous flow conditions. This system is mounted inside an MRI scanner and allows performing simultaneously MRI experiments and rapid MRS metabolic analysis of the microdialysate. The feasibility of this approach is demonstrated by analyzing extracellular brain cancer cells (glioma) in vitro and brain metabolites in an animal model in vivo. We expect that our approach is readily translatable into clinical settings and can be used for a better and precise understanding of diseases linked to metabolic dysfunction.

From single to multiple microcoil flow probe NMR and related capillary techniques: a review

Nuclear magnetic resonance (NMR) spectroscopy is one of the most important and powerful instrumental analytical techniques for structural elucidation of unknown small and large (complex) isolated and synthesized compounds in organic and inorganic chemistry. X-ray crystallography, neutron scattering (neutron diffraction), and NMR spectroscopy are the only suitable methods for three-dimensional structure determination at atomic resolution. Moreover, these methods are complementary. However, by means of NMR spectroscopy, reaction dynamics and interaction processes can also be investigated. Unfortunately, this technique is very insensitive in comparison with other spectrometric (e.g., mass spectrometry) and spectroscopic (e.g., infrared spectroscopy) methods. Mainly through the development of stronger magnets and more sensitive solenoidal microcoil flow probes, this drawback has been successfully counteracted. Capillary NMR spectroscopy increases the mass-based sensitivity of the NMR spectroscopic analysis up to 100-fold compared with conventional 5-mm NMR probes, and thus can be coupled online and off-line with other microseparation and detection techniques. It offers not only higher sensitivity, but in many cases provides better quality spectra than traditional methods. Owing to the immense number of compounds (e.g., of natural product extracts and compound libraries) to be examined, single microcoil flow probe NMR spectroscopy will soon be far from being sufficiently effective as a screening method. For this reason, an inevitable trend towards coupled microseparation-multiple microcoil flow probe NMR techniques, which allow simultaneous online and off-line detection of several compounds, will occur. In this review we describe the current status and possible future developments of single and multiple microcoil capillary flow probe NMR spectroscopy and its application as a high-throughput tool for the analysis of a large number of mass-limited samples. The advantages and drawbacks of different coupled microseparation-capillary NMR spectroscopy techniques, such as capillary high-performance liquid chromatography-NMR spectroscopy, capillary electrophoresis-NMR spectroscopy, and capillary gas chromatography-NMR spectroscopy, are discussed and demonstrated by specific applications. Another subject of discussion is the progress in parallel NMR detection techniques. Furthermore, the applicability and mixing capability of tiny reactor systems, termed "microreactors" or "micromixers," implemented in NMR probes is demonstrated by carbamate- and imine-forming reactions.

Multiplexed NMR: an automated CapNMR dual-sample probe

A new generation of microscale, nuclear magnetic resonance (CapNMR) probe technology employs two independent detection elements to accommodate two samples simultaneously. Each detection element in the dual-sample CapNMR probe (DSP) delivers the same spectral resolution and S/N as in a CapNMR probe configured to accommodate one sample at a time. A high degree of electrical isolation allows the DSP to be used in a variety of data acquisition modes. Both samples are shimmed simultaneously to achieve high spectral resolution for simultaneous data acquisition, or alternatively, a flowcell-specific shim set is readily called via spectrometer subroutines to enable acquisition from one sample while the other is being loaded. An automation system accommodates loading of two samples via dual injection ports on an autosampler and two completely independent flowpaths leading to dedicated flowcells in the DSP probe.

Small-volume nuclear magnetic resonance spectroscopy

Nuclear magnetic resonance (NMR) spectroscopy is one of the most information-rich analytical techniques available. However, it is also inherently insensitive, and this drawback precludes the application of NMR spectroscopy to mass- and volume-limited samples. We review a particular approach to increase the sensitivity of NMR experiments, namely the use of miniaturized coils. When the size of the coil is reduced, the sample volume can be brought down to the nanoliter range. We compare the main coil geometries (solenoidal, planar, and microslot/stripline) and discuss their applications to the analysis of mass-limited samples. We also provide an overview of the hyphenation of microcoil NMR spectroscopy to separation techniques and of the integration with lab-on-a-chip devices and microreactors.

Single echo acquisition MRI using RF encoding

Encoding of spatial information in magnetic resonance imaging is conventionally accomplished by using magnetic field gradients. During gradient encoding, the position in k-space is determined by a time-integral of the gradient field, resulting in a limitation in imaging speed due to either gradient power or secondary effects such as peripheral nerve stimulation. Partial encoding of spatial information through the sensitivity patterns of an array of coils, known as parallel imaging, is widely used to accelerate the imaging, and is complementary to gradient encoding. This paper describes the one-dimensional limit of parallel imaging in which all spatial localization in one dimension is performed through encoding by the radiofrequency (RF) coil. Using a one-dimensional array of long and narrow parallel elements to localize the image information in one direction, an entire image is obtained from a single line of k-space, avoiding rapid or repeated manipulation of gradients. The technique, called single echo acquisition (SEA) imaging, is described, along with the need for a phase compensation gradient pulse to counteract the phase variation contained in the RF coil pattern which would otherwise cause signal cancellation in each imaging voxel. Image reconstruction and resolution enhancement methods compatible with the speed of the technique are discussed. MR movies at frame rates of 125 frames per second are demonstrated, illustrating the ability to monitor the evolution of transverse magnetization to steady state during an MR experiment as well as demonstrating the ability to image rapid motion. Because this technique, like all RF encoding approaches, relies on the inherent spatially varying pattern of the coil and is not a time-integral, it should enable new applications for MRI that were previously inaccessible due to speed constraints, and should be of interest as an approach to extending the limits of detection in MR imaging.

Design and construction of a versatile dual volume heteronuclear double resonance microcoil NMR probe

Improved NMR detection of mass limited samples can be obtained by taking advantage of the mass sensitivity of microcoil NMR, while throughput issues can be addressed using multiple, parallel sample detection coils. We present the design and construction of a double resonance 300-MHz dual volume microcoil NMR probe with thermally etched 440-nL detection volumes and fused silica transfer lines for high-throughput stopped-flow or flow-through sample analysis. Two orthogonal solenoidal detection coils and the novel use of shielded inductors allowed the construction of a probe with negligible radio-frequency cross talk. The probe was resonated at (1)H-(2)D (upper coil) and (1)H-(13)C (lower coil) frequencies such that it could perform 1D and 2D experiments with active locking frequency. The coils exhibited line widths of 0.8-1.1 Hz with good mass sensitivity for both (1)H and (13)C NMR detection. (13)C-directly detected (2)D HETCOR spectra of 5% v/v (13)C labeled acetic acid were obtained in less than 5 min. Demonstration of the probe characteristics as well as applications of the versatile two-coil double resonance probe are discussed.

Progress in visualizing turbulent flow using single-echo acquisition imaging

MRI of flow remains a challenging problem despite significant improvements in imaging speeds. For periodic flow the acquisition can be gated, synchronizing data acquisition with the flow. However, this method fails to work if the flow is sufficiently fast that turbulence occurs, or when it is sufficiently fast that blurring occurs during the excitation of the spins or the acquisition of the signal. This paper describes recent progress in employing a very fast MR imaging technique, Single Echo Acquisition Imaging (SEA-MRI) and spin-tagging to visualize very rapid and turbulent flow patterns. Demonstrations are done on a separating channel phantom with input flow rates ranging from zero to over 100 cm/sec. Spin-tagging enables a "texture" to be placed on the spins, enabling clear visualization of the complex flow patterns, and in some cases measurement of the flow velocity.

Development of a dual cell, flow-injection sample holder, and NMR probe for comparative ligand-binding studies

NMR based ligand screening is becoming increasingly important for the very early stages of drug discovery. We have proposed a method that makes highly efficient use of a single sample of a scarce target, or one with poor or limited solubility, to screen an entire compound library. This comparative method is based on immobilizing the target for the screening procedure. In order to support the method, a dual cell, flow injection probe with a single receiver coil has been constructed. The flow injection probe has been mated to a single high performance pump and sample handling system to enable the automated analysis of large numbers of compound mixes for binding to the target. The probe, having an 8 mm 1H/2H dual tuned coil and triple axis gradients, is easily shimmed and yields NMR spectra of comparable quality to a standard 5 mm high-resolution probe. The lineshape in the presence of a solid support is identical to that in glass NMR tubes in a 5 mm probe. Control spectra of each cell are identical and well separated, while ligand binding in a complex mixture can be readily detected in 20-30 min, thus paving the way for use of the probe for actual drug discovery efforts.

Spectral unraveling by space-selective Hadamard spectroscopy

Spectral unraveling by space-selective Hadamard spectroscopy (SUSHY) enables recording of NMR spectra of multiple samples loaded in multiple sample tubes in a modified spinner turbine and a regular 5mm liquids NMR probe equipped with a tri-axis pulsed field gradient coil. The individual spectrum from each sample is extracted by adding and subtracting data that are simultaneously obtained from all the tubes based on the principles of spatially resolved Hadamard spectroscopy. The well-known Hadamard spectroscopy has been applied for spatial selection and the method utilizes standard configuration of NMR instrument hardware. The SUSHY method can be easily incorporated in multi-dimensional multi-tube NMR experiments. This method combines the excitation multiplexing, natural advantage of FTNMR, and sample multiplexing and offers high-throughput by reducing the total experimental time by up to a factor of four in a 4-tube mode.

Comparison of the performance of round and rectangular wire in small solenoids for high-field NMR

This paper considers the effects of conductor geometry on the performance of small solenoidal coils for high-field NMR. First, a simple analytical model is presented for investigating the effects of conductor geometry on the current distribution in such coils. The model was used to derive optimum parameters for coils constructed from wire with either rectangular or circular cross-sections as a function of the length-to-diameter ratio. Second, a commercial software package utilizing full three-dimensional finite-element solutions to Maxwell's equations was used to confirm the basic findings of the simple analytical model, and also to compare simulated S/N estimations with experimental NMR spectra acquired with 2.5 mm and 1.0 mm-diameter solenoid coils: reasonable agreement was found. Third, as a demonstration of the usefulness of such coils for mass-limited samples, multidimensional experiments were performed at 750 MHz on approximately 4.7 nmol (41 microg) of PF1061, a protein from Pyrococcus furiosus.

Insights into cyclodextrin interactions during sample stacking using capillary isotachophoresis with on-line microcoil NMR detection

On-line capillary isotachophoresis (cITP)-NMR experiments were used to probe the interactions of the pharmaceutical compounds S-alprenolol, S-atenolol, R-propranolol, R-salbutamol and S-terbutaline with beta-cyclodextrin (beta-CD) during cITP concentration. In cITP, ionic analytes are concentrated and separated on the basis of their electrophoretic mobility. Because neutral molecules have an electrophoretic mobility of zero, they are normally not concentrated or separated in electrophoretic experiments like cITP. Most of the analytes studied were concentrated by cITP sample stacking by a factor of around 300. For analytes that formed a strong inclusion complex, beta-CD co-concentrated during cITP sample stacking. However, once the focusing process was complete, a discrete diffusional boundary formed between the cITP-focused analyte band and the leading and trailing electrolyte, which restricted diffusion into and out of the analyte band.

Nuclear magnetic resonance coupled microseparations

The increased separation efficiency afforded by reducing the size of the separation column has resulted in 'microseparations' becoming an important component in many chemical and biochemical applications. The coupling of microseparations with NMR detection is an area of increasing interest owing to the high structural information of NMR. In order to couple efficiently with the separation, the NMR detector must be reduced in size to correspond to that of the separation peak. This paper summarizes some of the approaches used in coupling NMR detection with pressure-driven and electrophoretic microseparations, the design of small NMR detectors and applications of this technology.

Microcoil nuclear magnetic resonance spectroscopy

In comparison with most analytical chemistry techniques, nuclear magnetic resonance has an intrinsically low sensitivity, and many potential applications are therefore precluded by the limited available quantity of certain types of sample. In recent years, there has been a trend, both commercial and academic, towards miniaturization of the receiver coil in order to increase the mass sensitivity of NMR measurements. These small coils have also proved very useful in coupling NMR detection with commonly used microseparation techniques. A further development enabled by small detectors is parallel data acquisition from many samples simultaneously, made possible by incorporating multiple receiver coils into a single NMR probehead. This review article summarizes recent developments and applications of "microcoil" NMR spectroscopy.

Reduced data acquisition time in multi-dimensional NMR spectroscopy using multiple-coil probes

A new hardware-based approach is presented to reduce data acquisition times in multi-dimensional NMR spectroscopy using a multiple-coil probe. Using a four-coil setup, two-dimensional COSY and TOCSY spectra were acquired in one-quarter the time of conventional spectra by simultaneous acquisition of different effective t1 evolution times for each coil. Data processing consists of simple phase-shifting and intensity normalization of the individual data sets, and results in spectra almost identical to those acquired in a conventional manner. This method can potentially be integrated with other new data acquisition and processing schemes for further increases in data acquisition speed.

Hyphenation of capillary separations with nuclear magnetic resonance spectroscopy

The hyphenation of small-volume separations to information-rich detection offers the promise of unmatched analytical information on the components of complex mixtures. Nuclear magnetic resonance (NMR) spectroscopy provides information about molecular structure, although sensitivity remains an issue for on-line NMR detection. This is especially true when hyphenating NMR to capillary separations as the observation time and analyte mass are decreased to the point where reduced information is obtained from the eluting analytes. Because of these limitations, advances in instrumental performance have a large impact on the overall performance of a separation-NMR system. Instrumental aspects and the capabilities of cLC-NMR, CEC-NMR and CE-NMR are reviewed, and applications that have used this technology highlighted. Recent trends towards small volume capillary scale separations are emphasized, as is the recent success of capillary-isotachophoresis (cITP)-NMR.