Hyphenation of Capillary HPLC to Microcoil 1H NMR Spectroscopy for the Determination of Tocopherol Homologues

NMR-Based Chromatography Readouts: Indispensable Tools to “Translate” Analytical Features into Molecular Structures

Gaining structural information is a must to allow the unequivocal structural characterization of analytes from natural sources. In liquid state, NMR spectroscopy is almost the only possible alternative to HPLC-MS and hyphenating the effluent of an analyte separation device to the probe head of an NMR spectrometer has therefore been pursued for more than three decades. The purpose of this review article was to demonstrate that, while it is possible to use mass spectrometry and similar methods to differentiate, group, and often assign the differentiating variables to entities that can be recognized as single molecules, the structural characterization of these putative biomarkers usually requires the use of NMR spectroscopy.

Deuterated Modifiers in Sub/Supercritical Fluid Chromatography for Streamlined NMR Structure Elucidation

Isolation and chemical characterization of target components in fast-paced pharmaceutical laboratories can often be challenging, especially when dealing with mixtures of closely related, possibly unstable species. Traditionally, this process involves intense labor and manual intervention including chromatographic method development and optimization, fraction collection, and drying processes prior to NMR analyses for unambiguous structure elucidation. To circumvent these challenges, a foundational framework for the proper utilization of supercritical carbon dioxide (scCO₂) and deuterated modifiers (CD₃OD) in sub/supercritical fluid chromatography (SFC) is herein introduced. This facilitates a streamlined multicomponent isolation with minimized protic residues, further enabling immediate NMR analysis. In addition to bypassing tedious drying processes and minimizing analyte degradation, this approach (complementary to traditional reversed-phase liquid chromatography, RPLC) delivers highly efficient separations and automated fraction collection using readily available analytical/midscale SFC instrumentation. A series of diverse analytes across a wide spectrum of chemical properties (acid, basic, and neutral), combined with different stationary-phase columns in SFC are investigated using both a protic organic modifier (CH₃OH) and its deuterated counterpart (CD₃OD). The power of this framework is demonstrated with pharmaceutically relevant applications in the context of target characterization and analysis of complex multicomponent reaction mixtures from modern synthetic chemistry, demonstrating high isolation yields while reducing both the environmental footprint and manual intervention. This workflow enables unambiguous fast-paced structure elucidation on the analytical scale, providing results that are comparable to traditional, but time-consuming, RPLC purification approaches.

Trapping-Enrichment Multi-dimensional Liquid Chromatography with On-Line Deuterated Solvent Exchange for Streamlined Structure Elucidation at the Microgram Scale

At the forefront of chemistry and biology research, development timelines are fast-paced and large quantities of pure targets are rarely available. Herein, we introduce a new framework, which is built upon an automated, online trapping-enrichment multi-dimensional liquid chromatography platform (TE-Dt-mDLC) that enables: 1) highly efficient separation of complex mixtures in a first dimension (¹ D-UV); 2) automated peak trapping-enrichment and buffer removal achieved through a sequence of H₂ O and D₂ O washes using an independent pump setup; and 3) a second dimension separation (² D-UV-MS) with fully deuterated mobile phases and fraction collection to minimize protic residues for immediate NMR analysis while bypassing tedious drying processes and minimizing analyte degradation. Diverse examples of target isolation and characterization from organic synthesis and natural product chemistry laboratories are illustrated, demonstrating recoveries above 90 % using as little as a few micrograms of material.

A pure shift and spin echo based approach for high-resolution diffusion-ordered NMR spectroscopy

Diffusion-ordered NMR spectroscopy (DOSY) can be used for separating mixture components according to their individual diffusion behaviors, thus offering a powerful tool for the analysis of compound mixtures. However, conventional DOSY experiments generally encounter the problem of limited resolution in the spectral domain, particularly for applications to complex mixtures that contains crowed resonances in 1D NMR. In addition, chemical exchange effects, bringing about spurious component signals, pose another limitation for interpreting DOSY measurements. Here, a general DOSY method is proposed based on pure shift extraction and spin echo evolution to obtain high-resolution 2D DOSY spectra, along with the suppression on effects of chemical exchange and J coupling. Both theoretical analyses and experimental results suggest that the proposed method is useful for high-resolution DOSY measurements on complex mixtures that contains crowded or even overlapped NMR resonances and exchanging spin systems.

Various Dereplication Strategies Using LC-MS for Rapid Natural Product Lead Identification and Drug Discovery

Natural products are the most consistently successful source of drug leads. The rapid identification of known compounds from natural product extracts, or ‘dereplication’, is an important step in an efficiently run drug discovery program. Modern spectroscopic methods have largely revolutionized compound identification and tremendously accelerated the pace at which isolated compounds can be identified. Dereplication strategies use analytical techniques and database searching to determine the identity of an active compound at the earliest possible stage in the discovery process. This prevents wasted effort on samples with no potential for development and allows resources to be focused on the most promising lead. In the past few years, advances in technology have allowed the development of tandem analytical techniques, such as HPLC-PDA, LC-MS, LC-MS-MS, LC-NMR, and LC-NMR-MS. This review describes the principles and performance of a number of hyphenated techniques involving LC-MS that can be used for dereplication of natural products for rapid lead identification.

Hyphenation of Supercritical Fluid Chromatography and NMR with In-Line Sample Concentration

By coupling supercritical fluid chromatography (SFC) and nuclear magnetic resonance (NMR) in-line, a powerful analytical method arises that enables chemically specific analysis of a broad range of complex mixtures. However, during chromatography, the compounds are diluted in the mobile phase, in this case supercritical CO₂ (scCO₂), often resulting in concentrations that are too low to be detected by NMR spectroscopy or at least requiring excessive signal averaging. We present a hyphenated SFC-NMR setup with an integrated approach for concentrating samples in-line, which are diluted in scCO₂ during chromatography. This in-line concentration is achieved by controlled in-line expansion of the scCO₂. As a proof of concept four isomers of vitamin E (tocopherol) were isolated by SFC, concentrated in-line by expanding CO₂ from 120 to 50 bar, and finally shuttled to the NMR spectrometer fitted with a dedicated probehead for spectroscopic characterization of microfluidic samples. The abundant isomers were readily detected, supporting the viability of SFC-NMR as a powerful analytical tool.

Concepts and Methods to Access Novel Antibiotics from Actinomycetes

Actinomycetes have been proven to be an excellent source of secondary metabolites for more than half a century. Exhibiting various bioactivities, they provide valuable approved drugs in clinical use. Most microorganisms are still untapped in terms of their capacity to produce secondary metabolites, since only a small fraction can be cultured in the laboratory. Thus, improving cultivation techniques to extend the range of secondary metabolite producers accessible under laboratory conditions is an important first step in prospecting underexplored sources for the isolation of novel antibiotics. Currently uncultured actinobacteria can be made available by bioprospecting extreme or simply habitats other than soil. Furthermore, bioinformatic analysis of genomes reveals most producers to harbour many more biosynthetic gene clusters than compounds identified from any single strain, which translates into a silent biosynthetic potential of the microbial world for the production of yet unknown natural products. This review covers discovery strategies and innovative methods recently employed to access the untapped reservoir of natural products. The focus is the order of actinomycetes although most approaches are similarly applicable to other microbes. Advanced cultivation methods, genomics- and metagenomics-based approaches, as well as modern metabolomics-inspired methods are highlighted to emphasise the interplay of different disciplines to improve access to novel natural products.

Toward high-resolution NMR spectroscopy of microscopic liquid samples

A longstanding limitation of high-resolution NMR spectroscopy is the requirement for samples to have macroscopic dimensions. Commercial probes, for example, are designed for volumes of at least 5 μL, in spite of decades of work directed toward the goal of miniaturization. Progress in miniaturizing inductive detectors has been limited by a perceived need to meet two technical requirements: (1) minimal separation between the sample and the detector, which is essential for sensitivity, and (2) near-perfect magnetic-field homogeneity at the sample, which is typically needed for spectral resolution. The first of these requirements is real, but the second can be relaxed, as we demonstrate here. By using pulse sequences that yield high-resolution spectra in an inhomogeneous field, we eliminate the need for near-perfect field homogeneity and the accompanying requirement for susceptibility matching of microfabricated detector components. With this requirement removed, typical imperfections in microfabricated components can be tolerated, and detector dimensions can be matched to those of the sample, even for samples of volume ≪5 μL. Pulse sequences that are robust to field inhomogeneity thus enable small-volume detection with optimal sensitivity. We illustrate the potential of this approach to miniaturization by presenting spectra acquired with a flat-wire detector that can easily be scaled to subnanoliter volumes. In particular, we report high-resolution NMR spectroscopy of an alanine sample of volume 500 pL.

Ultrafast determination of vitamin E using LC–ESI–MS/MS for preclinical development of new nutraceutical formulations

Aim: We proposed a rapid and high quality method to determine α-tocopherol (α-T) in different biopharmaceutical samples using liquid chromatography-diode array detector on-line ESI–MS/MS. Materials & methods: A working standard solution of α-T and internal standard, phenyl-5,7-dimethyl-d6-α-tocopherol, were used for optimization and validation of the method. Levels of α-T in nanoemulsions, serum and plasma samples were evaluated. Results & conclusion: Precision (1% for retention time, 5% for peak area and 3% for relative peak area), linearity range (among 0.625–20.0 μg ml-1), LOD and LOQ, accuracy and matrix effect were studied. The validated chromatographic method is presented as valuable analytical tool for the determination of α-tocopherol in loaded drug delivery systems and in biodistribution levels in blood samples.

Analysis of mass-limited mixtures using supercritical-fluid chromatography and microcoil NMR

A protocol combining rapid and low-cost chromatography and NMR spectroscopy is demonstrated.

Mass spectrometry and NMR spectroscopy: modern high-end detectors for high resolution separation techniques--state of the art in natural product HPLC-MS, HPLC-NMR, and CE-MS hyphenations

Current natural product research is unthinkable without the use of high resolution separation techniques as high performance liquid chromatography or capillary electrophoresis (HPLC or CE respectively) combined with mass spectrometers (MS) or nuclear magnetic resonance (NMR) spectrometers. These hyphenated instrumental analysis platforms (CE-MS, HPLC-MS or HPLC-NMR) are valuable tools for natural product de novo identification, as well as the authentication, distribution, and quantification of constituents in biogenic raw materials, natural medicines and biological materials obtained from model organisms, animals and humans. Moreover, metabolic profiling and metabolic fingerprinting applications can be addressed as well as pharmacodynamic and pharmacokinetic issues. This review provides an overview of latest technological developments, discusses the assets and drawbacks of the available hyphenation techniques, and describes typical analytical workflows.

Preparation and certification of standard reference material 3278 tocopherols in edible oils

Standard Reference Material (SRM) 3278 Tocopherols in Edible Oils has been issued for use as a quality assurance tool in the measurement of tocopherols. Like other natural-matrix SRMs, this material can be used in method validation or in assignment of tocopherol values to in-house quality control materials. Because most edible oils contain one predominant tocopherol isoform, the SRM is a blend of sunflower, soy, canola, and safflower oils to provide roughly comparable chromatographic peak heights of the two main tocopherols, γ and α, with smaller amounts of δ and β. The four tocopherol isoforms were determined by three independent liquid chromatography methods with absorbance and fluorescence detection. Various chromatographic and detection modes are used for assignment of certified values because biases inherent to one method should not be present in the other, and the existence of bias can therefore be identified.

Liquid chromatography-nuclear magnetic resonance coupling as alternative to liquid chromatography-mass spectrometry hyphenations: curious option or powerful and complementary routine tool?

Combining the most powerful separation techniques, i.e. liquid chromatography (LC) or capillary electrophoresis (CE) with a information rich detection system - the mass spectrometer or the nuclear magnetic resonance (NMR) spectrometer - has been pursued for more than three decades. This compilation shall provide an overview of the advantages and limitations of the LC-NMR hyphenation in the light of its most valued application-the unequivocal analyte identification. Especially the post LC trapping of analytes with an in-line solid phase extraction (SPE) device prior to transferring the analyte of interest to the NMR spectrometer (LC-SPE-NMR) proved to be a robust installation allowing a significant cut-down of the amount of analyte needed for the generation of high quality heteronuclear NMR shift correlation data. Different available technical realizations will be discussed and typical application examples from natural product research and from industrial settings will be given.

From single to multiple microcoil flow probe NMR and related capillary techniques: a review

Nuclear magnetic resonance (NMR) spectroscopy is one of the most important and powerful instrumental analytical techniques for structural elucidation of unknown small and large (complex) isolated and synthesized compounds in organic and inorganic chemistry. X-ray crystallography, neutron scattering (neutron diffraction), and NMR spectroscopy are the only suitable methods for three-dimensional structure determination at atomic resolution. Moreover, these methods are complementary. However, by means of NMR spectroscopy, reaction dynamics and interaction processes can also be investigated. Unfortunately, this technique is very insensitive in comparison with other spectrometric (e.g., mass spectrometry) and spectroscopic (e.g., infrared spectroscopy) methods. Mainly through the development of stronger magnets and more sensitive solenoidal microcoil flow probes, this drawback has been successfully counteracted. Capillary NMR spectroscopy increases the mass-based sensitivity of the NMR spectroscopic analysis up to 100-fold compared with conventional 5-mm NMR probes, and thus can be coupled online and off-line with other microseparation and detection techniques. It offers not only higher sensitivity, but in many cases provides better quality spectra than traditional methods. Owing to the immense number of compounds (e.g., of natural product extracts and compound libraries) to be examined, single microcoil flow probe NMR spectroscopy will soon be far from being sufficiently effective as a screening method. For this reason, an inevitable trend towards coupled microseparation-multiple microcoil flow probe NMR techniques, which allow simultaneous online and off-line detection of several compounds, will occur. In this review we describe the current status and possible future developments of single and multiple microcoil capillary flow probe NMR spectroscopy and its application as a high-throughput tool for the analysis of a large number of mass-limited samples. The advantages and drawbacks of different coupled microseparation-capillary NMR spectroscopy techniques, such as capillary high-performance liquid chromatography-NMR spectroscopy, capillary electrophoresis-NMR spectroscopy, and capillary gas chromatography-NMR spectroscopy, are discussed and demonstrated by specific applications. Another subject of discussion is the progress in parallel NMR detection techniques. Furthermore, the applicability and mixing capability of tiny reactor systems, termed "microreactors" or "micromixers," implemented in NMR probes is demonstrated by carbamate- and imine-forming reactions.

Characterization of bixin by LC-MS and LC-NMR

An overview upon modern analytical techniques for the isolation, separation, and structural identification of the essential bioactive carotenoid bixin is given. Isolation from biological matrices is performed by matrix solid phase dispersion (MSPD). The extract is separated with shape-selective C(30 )columns. Structural assignment of the separated compounds is done by online LC-MS and capillary HPLC-NMR.

Comparison of reversed-phase liquid chromatography–mass spectrometry with electrospray and atmospheric pressure chemical ionization for analysis of dietary tocopherols

ESI and APCI ionization techniques in both negative and positive ion modes were evaluated for simultaneous LC-MS analysis of the four tocopherol homologues (alpha, beta, gamma and delta). The ESI and APCI ionization of tocopherols in positive ion mode was not efficient and proceeded via two competitive mechanisms, with the formation of protonated pseudo-molecular ions and molecular ions, which adversely influenced the repeatability of MS signal. Ionization in negative ion mode in both ESI and APCI was more efficient as it only produced target deprotonated pseudo-molecular ions. The APCI in negative ion mode showed larger linearity range, lower detection limits and was less sensitive to the differences in chemical structure of analytes and nature of applied solvents than negative ion ESI. Negative ion APCI was, therefore, chosen for the development of LC-MS method for simultaneous determination of the four tocopherols in foods. A baseline separation of the tocopherols was achieved on novel pentafluorophenyl silica-based column Fluophase PFP. The use of methanol-water (95:5, v/v) as a mobile phase was preferable to the use of acetonitrile-water due to considerable gain in MS signal. The limits of quantifications were 9 ng/mL for alpha-tocopherol, 8 ng/mL for beta- and gamma- and 7.5 ng/mL for delta-tocopherol when 2 microL was injected. This method was successfully applied to determination of tocopherols in sunflower oil and milk.

Application of polymer based stationary phases in high performance liquid chromatography and capillary high performance liquid chromatography hyphenated to microcoil 1H nuclear magnetic resonance spectroscopy

The increased demand for chromatographic materials that are able to achieve a fast separation of large quantities of structure analogues is a great challenge. It is known that polymer based chromatographic materials have a higher loadability, compared to silica based sorbents. Unfortunately these polymer materials cannot be used under high pressure which is necessary in order to obtain high flow rates, and hence long times are needed to perform a separation. However, by immobilizing a polymer on a mechanically stable porous silica core, this problem can be circumvented and higher flows become feasible on these materials. Especially for capillary liquid chromatography hyphenated with nuclear magnetic resonance a high loadability is of great importance in order to obtain sharp, resolved, and concentrated peaks thus resulting in a good signal to noise ratio in the NMR experiment. Therefore, a highly shape selective chromatographic sorbent was developed by covalently immobilizing a poly(ethylene-co-acrylic) acid copolymer (-CH(2)CH(2)-)(x)[CH(2)CH(CO(2)H)-](y) (x=119, y=2.4) with a mass fraction of acrylic acid of 5% as stationary phase on silica via a spacer molecule (3-glycidoxypropyltrimethoxysilane). First, the loadability of this sorbent compared to C(30) is demonstrated by the HPLC separation of two xanthophyll isomers. Subsequently, it has been successfully employed in the hyphenation of capillary HPLC with microcoil (1)H NMR spectroscopy by separating and identifying a highly concentrated solution of the tocopherol homologues.

Identification of natural products using HPLC-SPE combined with CapNMR

Two major development areas in HPLC-NMR hyphenation are postcolumn solid-phase extraction (HPLC-SPE-NMR) and capillary separations with NMR detection by means of solenoidal microcoils (CapNMR). These two techniques were combined off-line into HPLC-SPE-CapNMR, which combines the advantage of high loadability of normal-bore HPLC columns with high mass sensitivity of capillary NMR probes with an active volume of 1.5 microL. The technique was used for rapid identification of complex sesquiterpene lactones and esterified phenylpropanoids present in an essentially crude plant extract (toluene fraction of an ethanolic extract of Thapsia garganica fruits). Elution profiles of 10 x 1 mm i.d. SPE cartridges filled with poly(divinylbenzene) resin were found to be only marginally broader than those observed upon direct injection of 6-microL samples into the probe. Thus, the technique focuses analytes emerging in the HPLC elution bands of 0.5-1 mL into volumes of approximately 10 microL, compatible with the CapNMR probe. Using this technique, nine natural products (1-9) present in the plant extract in amounts varying from 0.1 to 20% were identified by means of 1D and 2D NMR spectra, supported by parallel HPLC-ESIMS measurements. Therefore, HPLC-SPE-CapNMR should be regarded as an attractive alternative to other applications of CapNMR for mixture analysis.

Hyphenation of Gas Chromatography to Microcoil 1H Nuclear Magnetic Resonance Spectroscopy

Whereas the hyphenation of gas chromatography (GC) with mass spectrometry is of great importance, little is known about the coupling to nuclear magnetic resonance spectroscopy (NMR). The investigation of this technique is an attractive proposition because of the valuable information given by NMR on molecular structure. The experiments shown here are to our knowledge the first hyphenating capillary GC to microcoil NMR. In contrast to liquids, gases have rarely been investigated by NMR, mainly due to the experimental difficulties in handling gases and the low signal-to-noise-ratio (SNR) of the NMR signal obtained at atmospheric pressure. With advances in NMR sensitivity (higher magnetic fields and solenoidal microprobes), this limitation can be largely overcome. In this paper, we describe the use of a custom-built solenoidal NMR microprobe with an active volume of 2 microL for the NMR detection of several compounds at 400 MHz, first in a mixture, and then with full coupling to capillary GC to identify them separately. The injected amounts of each analyte in the hyphenated experiments are in the range of 15-50 micromol, resulting in reasonable SNR for sample masses of 1-2 microg.

Extending the scope of NMR spectroscopy with microcoil probes

Capillary NMR (CapNMR) spectroscopy has emerged as a major breakthrough for increasing the mass-sensitivity of NMR spectroscopic analysis and enabling the combination of NMR spectroscopy with other analytical techniques. Not only is the acquisition of high-sensitivity spectra getting easier but the quality of CapNMR spectra obtained in many small-molecule applications exceeds what can be accomplished with conventional designs. This Minireview discusses current CapNMR technology and its applications for the characterization of mass-limited, small-molecule and protein samples, the rapid screening of small-molecule or protein libraries, as well as hyphenated techniques that combine CapNMR with other analytical methods.

Development of an NMR Interface Microchip "MICCS" for Direct Detection of Reaction Products and Intermediates of Micro-syntheses Using a "MICCS-NMR"

The development of an NMR interface microchip and its applications to the real-time monitoring of chemical reactions are described. The microchip device was named "MICCS" (MIcro Channeled Cell for Synthesis monitoring), and the method using it was named "MICCS-NMR". MICCS was inserted into a 5 mm Phi NMR sample tube. Thus standard solution NMR probes without any modifications can be used in MICCS-NMR measurements. A gap between MICCS and the sample tube was filled with a deuterated solvent for an NMR lock. The reaction temperature and reaction time in MICCS can be easily changed by adjusting the temperature of the NMR probe and changing the flow rates, respectively. The effectiveness of the MICCS-NMR was verified in the real-time monitoring of the Wittig reaction. Preliminary data on the direct detection of intermediates of the Grignard reaction is also reported. Besides real-time monitoring of chemical reactions, MICCS-NMR would be useful as a qualitative detection method for microchip-based synthesis.

Signal enhancement in HPLC/microcoil NMR using automated column trapping

A new HPLC NMR system is described that performs analytical separation, preconcentration, and NMR spectroscopy in rapid succession. The central component of our method is the online preconcentration sequence that improves the match between postcolumn analyte peak volume and microcoil NMR detection volume. Separated samples are collected on to a C18 guard column with a mobile phase composed of 90% D2O/10% acetonitrile-D3 and back-flushed to the NMR microcoil probe with 90% acetonitrile-D3/10% D2O. To assess the performance of our unit, we separated a standard mixture of 1 mM ibuprofen, naproxen, and phenylbutazone using a commercially available C18 analytical column. The S/N measurements from the NMR acquisitions indicated that we achieved signal enhancement factors up to 10.4 (+/-1.2)-fold. Furthermore, we observed that preconcentration factors increased as the injected amount of analyte decreased. The highest concentration enrichment of 14.7 (+/-2.2)-fold was attained injecting 100 microL of solution of 0.2 mM (approximately 4 microg) ibuprofen.

Unambiguous detection of astaxanthin and astaxanthin fatty acid esters in krill (Euphausia superba Dana)

HPLC atmospheric pressure chemical ionization (APCI)/MS, GC MS, HPLC diode array detection (DAD), and NMR were used for the identification of astaxanthin and astaxanthin fatty acid esters in krill (Euphausia superba Dana). Matrix solid phase dispersion was applied for the extraction of the carotenoids. This gentle and expeditious extraction technique for solid and viscous samples leads to distinct higher enrichment rates than the conventional liquid-liquid extraction. The chromatographic separation was achieved employing a C30 RP column that allows the separation of shape-constrained geometrical isomers. A methanol/tert-butylmethyl ether/water gradient was applied. (all-E) Astaxanthin and the geometrical isomers were identified by HPLC APCI/MS, by coelution with isomerized authentical standard, by UV spectroscopy (DAD), and three isomers were unambiguously assigned by microcoil NMR spectroscopy. In this method, microcoils are transversally aligned to the magnetic field and have an increased sensitivity compared to the conventional double-saddle Helmholtz coils, thus enabling the measurement on small samples. The carotenol fatty acid esters were saponified enzymatically with Lipase type VII from Candida rugosa. The fatty acids were detected by GC MS after transesterification, but also without previous derivatization by HPLC APCI/MS. C14:0, C16:0, C16:1, C18:1, C20:0, C20:5, and C22:6 were found in astaxanthin monoesters and in astaxanthin diesters. (all-E) Astaxanthin was identified as the main isomer in six fatty acid ester fractions by NMR. Quantitation was carried out by the method of internal standard. (13-cis) Astaxanthin (70 microg/g), 542 microg/g (all-E) astaxanthin, 36 microg/g unidentified astaxanthin isomer, 62 microg/g (9-cis) astaxanthin, and 7842 microg/g astaxanthin fatty acid esters were found.

Structure elucidation of deoxylutein II isomers by on-line capillary high performance liquid chromatography–1H nuclear magnetic resonance spectroscopy

Thermal and iodine-catalyzed photochemical (Z/E)-isomerization of deoxylutein II [(3R,6'R)-3-hydroxy-3',4'-didehydro-beta,gamma-carotene, anhydrolutein I] (2), the dehydration product of lutein [(3R,3'R,6'R)-beta,epsilon-carotene-3,3'-diol] (4), yielded multi-component mixtures of (Z)-isomers. By I(2)-catalyzed photoisomerization, (9Z)-2, (9'Z)-2, (13Z)-2, (13'Z)-2 and (15Z)-2 are generated as main products. In addition, this thermodynamic-equilibrium mixture contains traces of (9Z,9'Z)-2 and other (di-Z)-isomers in minor concentrations. Thirteen isomers are chromatographically separated and detected on-line by UV-vis and mass spectrometry. (all-E)-Deoxylutein II (2) and six of its (Z)-configured isomers are separated by capillary HPLC (acetone-d(6)/D(2)O = 85:15) and detected on-line by (1)H NMR spectroscopy in a microprobe. With the microprobe and the active detection volume of 1.5 microl, it is possible to perform structure elucidation with very small amounts available for various (Z)-isomers of deoxylutein II (2) in the isomerization mixture.

Conformational temperature dependence of a poly(ethylene-co-acrylic acid) stationary phase investigated by nuclear magnetic resonance spectroscopy and liquid chromatography

A polymer-based RP sorbent was prepared by immobilizing a poly(ethylene-co-acrylic acid) copolymer with an acid mass fraction of 5% on silica by using a 3-glycidoxypropyl linkage. 13C cross-polarization/magic angle spinning NMR spectroscopy of the sorbent, either in the dry state or suspended in the mobile phase, showed an increase in mobility at elevated temperatures. Alkyl chain segments with gauche conformations were more mobile than chain segments with trans conformations. The strength of the 13C-1H dipolar couplings in the alkyl chains was measured using the constant time dipolar and chemical shift pulse sequence, revealing less molecular motion for the trans conformation. Non-linear van't Hoff plots were observed for separations of shape-constrained solutes (such as geometric beta-carotene isomers and polycyclic aromatic hydrocarbons). At higher temperatures, the retention behavior was similar to that of monomeric C18 sorbents, whereas at ambient and lower temperatures, enhanced shape-selective properties were exhibited similar to those of polymeric C30 sorbents.

Molecularly imprinted polymers grafted to flow through poly(trimethylolpropane trimethacrylate) monoliths for capillary-based solid-phase extraction

Monolithic molecularly imprinted polymers (mMIPs) have been synthesized in a novel way using a trimethylolpropane trimethacrylate core material photo-polymerized in situ in a 100 microm I.D. UV-transparent capillary and further photo-grafted to create specific cavities in the grafted layer. This polymerization technique allows the imprints to be directly created on the surface of the material using a minimum amount of template. Three different anaesthetics of similar structures (bupivacaine, mepivacaine and S-ropivacaine) were used as model target molecules to synthesize sample enrichment media. Hence, various mMIPs have been prepared and evaluated on a micro-system against each analyte in order to test the retention properties and cross-selectivities of the materials. The retention factors were determined and compared with the non-imprinted reference column (mNIP), yielding high imprinting factors together with good selectivity factors between the three analytes. A study with a pure enantiomeric target was carried out to assess the degree of stereo-specific imprinting for injection of racemic mixtures. Finally, one column was imprinted with an equimolar mixture of all three anaesthetics to provide further comprehension of the retention mechanism and accredit the possibility of using the material as a sample enrichment entity. Scanning electron microscopy (SEM), nitrogen absorption/desorption (BET) and mercury intrusion porosimetry were used to characterize the monolith and the mMIPs properties. Nuclear magnetic resonance (NMR) has been used to assess the similarities between the mMIP and mNIP.

Cyclodextrin-modified microemulsion electrokinetic chromatography for separation of α-, γ-, δ-tocopherol and α-tocopherol acetate

Different forms of tocopherols, together with tocotrienols, are collectively named as vitamin E, and each possesses different degree of medical, biological and physiochemical significance. The main difficulty of separating different forms of tocopherols lay in their highly structural similarities and hydrophobicities. Microemulsion electrokinetic chromatography (MEEKC), claimed to attain high peak efficiency with great solubilization power, has not previously been applied to the separation of tocopherols. The effects that various parameters, such as buffer system, type and concentration of cyclodextrins, temperature, and sample matrix, have on the separation of tocopherols by MEEKC have been investigated. By using a buffer mixture of 4% (w/w) sodium dodecyl sulfate (SDS), 6.6% (w/w) 1-butanol, 0.8% (w/w) n-octane, 20% (w/w) 2-propanol, 68.6% (w/w) phosphate (25mM, pH 2.5), and 25mM heptakis(2,6-di-O-methyl)-beta-cyclodextrin (DM-beta-CD), the separation of alpha-, gamma-, and delta-tocopherol, alpha-tocopherol acetate, as well as the antioxidant butylated hydroxytoluene (BHT) at -26kV, 25 degrees C was completed within 35min. The practical potential of the present approach has been further validated by the determination of tocopherols in a vitamin E preparation, with the result of 132.63 (RSD 1.25%), 176.51 (RSD 0.29%), and 64.32mg (RSD 3.34%) per 500mg capsule for alpha-, gamma- and delta-tocopherol, respectively.

Automated microflow NMR: routine analysis of five-microliter samples

A microflow CapNMR probe double-tuned for 1H and 13C was installed on a 400-MHz NMR spectrometer and interfaced to an automated liquid handler. Individual samples dissolved in DMSO-d6 are submitted for NMR analysis in vials containing as little as 10 microL of sample. Sets of samples are submitted in a low-volume 384-well plate. Of the 10 microL of sample per well, as with vials, 5 microL is injected into the microflow NMR probe for analysis. For quality control of chemical libraries, 1D NMR spectra are acquired under full automation from 384-well plates on as many as 130 compounds within 24 h using 128 scans per spectrum and a sample-to-sample cycle time of approximately 11 min. Because of the low volume requirements and high mass sensitivity of the microflow NMR system, 30 nmol of a typical small molecule is sufficient to obtain high-quality, well-resolved, 1D proton or 2D COSY NMR spectra in approximately 6 or 20 min of data acquisition time per experiment, respectively. Implementation of pulse programs with automated solvent peak identification and suppression allow for reliable data collection, even for samples submitted in fully protonated DMSO. The automated microflow NMR system is controlled and monitored using web-based software.

Insights into cyclodextrin interactions during sample stacking using capillary isotachophoresis with on-line microcoil NMR detection

On-line capillary isotachophoresis (cITP)-NMR experiments were used to probe the interactions of the pharmaceutical compounds S-alprenolol, S-atenolol, R-propranolol, R-salbutamol and S-terbutaline with beta-cyclodextrin (beta-CD) during cITP concentration. In cITP, ionic analytes are concentrated and separated on the basis of their electrophoretic mobility. Because neutral molecules have an electrophoretic mobility of zero, they are normally not concentrated or separated in electrophoretic experiments like cITP. Most of the analytes studied were concentrated by cITP sample stacking by a factor of around 300. For analytes that formed a strong inclusion complex, beta-CD co-concentrated during cITP sample stacking. However, once the focusing process was complete, a discrete diffusional boundary formed between the cITP-focused analyte band and the leading and trailing electrolyte, which restricted diffusion into and out of the analyte band.

Nuclear magnetic resonance coupled microseparations

The increased separation efficiency afforded by reducing the size of the separation column has resulted in 'microseparations' becoming an important component in many chemical and biochemical applications. The coupling of microseparations with NMR detection is an area of increasing interest owing to the high structural information of NMR. In order to couple efficiently with the separation, the NMR detector must be reduced in size to correspond to that of the separation peak. This paper summarizes some of the approaches used in coupling NMR detection with pressure-driven and electrophoretic microseparations, the design of small NMR detectors and applications of this technology.

LC-NMR coupling technology: recent advancements and applications in natural products analysis

An overview of recent advances in nuclear magnetic resonance (NMR) coupled with separation technologies and their application in natural product analysis is given and discussed. The different modes of LC-NMR operation are described, as well as how technical improvements assist in establishing LC-NMR as an important tool in the analysis of plant-derived compounds. On-flow, stopped-flow and loop-storage procedures are mentioned, together with the new LC-SPE-NMR configuration. The implementation of mass spectrometry in LC-NMR is also useful on account of the molecular weight and fragmentation information that it provides, especially when new plant species are studied. Cryogenic technology and capillary LC-NMR are the other important recent developments. Since the plant kingdom is endless in producing potential drug candidates, development and optimization of LC-NMR techniques convert the study of natural products to a less-time-consuming task, speeding up identification.

Determination of regulatory phosphorylation sites in nanogram amounts of a synthetic fragment of ZAP-70 using microprobe NMR and on-line coupled capillary HPLC-NMR

The protein kinase ZAP-70 is involved in T-cell activation and interacts with tyrosine-phosphorylated peptide sequences known as immunoreceptor tyrosine activation motifs (ITAMs). We have studied the regulatory phosphorylation sites in the tryptic fragment containing amino acids 485-496 (ALGADDSYYTAR). The four possible peptides with phosphorylation at none, one, or both of the Y-492 and Y-493 tyrosines were specifically synthesized and analyzed by (1)H/(13)C-NMR at 600 MHz using a capillary HPLC-NMR microprobe. Unambiguous discrimination of the peptides was possible via effect of chemical shifts of phosphorylation on the aromatic tyrosine protons. With the microprobe and the detection volume of 1.5 microl, it was possible to perform structure elucidation with the very small amounts available for the various peptides. For the syringe injection, 15 microg of the analyte were used (corresponding to ca 2 mg in classical 5-mm tubes). Capillary HPLC-NMR spectra were recorded in the stopped-flow mode from less than 400 ng of each peptide, using 1D and 2D techniques ((1)H,(1)H-COSY-90, (1)H/(13)C-HSQC, and (1)H/(13)C-HMBC).

A comparison of capillary-scale LC-NMR with alternative techniques: spectroscopic and practical considerations

Experimental and practical details for the use of capillary LC (CapLC)-NMR are reported. The capillary NMR probe has high sensitivity and excellent flow characteristics and we found CapLC-NMR to be best suited to samples that are truly mass limited. CapLC-NMR relies on good capillary-scale chromatography where highly concentrated peaks with a volume closely matched to the NMR flow cell are achievable. Provided that the loading capacity of the capillary column is not limiting, the combination of high sensitivity and high solvent suppression quality makes CapLC-NMR an excellent choice. For many real samples, however, the loading is limiting and we found the combination of LC-SPE-MS-NMR with a cryoprobe enables more material to be purified for NMR analysis, while retaining sensitivity.

Effect of hydrodynamic flow on low-field spin-lattice relaxation in liquids in the nanoscopic vicinity of solid surfaces: theory and Monte Carlo simulations of model pore spaces

It is shown that slow hydrodynamic flow with velocities of a few millimeters per second reduces the spin-lattice relaxation rate of fluids confined to pores of a diamagnetic, polar, solid material. The effect is predicted by an analytical theory and Monte Carlo simulations of model pore spaces. Adsorbate molecules diffusing in the vicinity of pore surfaces can perform adsorption, desorption, and readsorption cycles, effectively leading to displacements along the surface (also termed "bulk mediated surface diffusion" or BMSD). Since the surface determines the orientation of the adsorbed molecule relative to the external magnetic field, desorption at one site and readsorption at another site of a nonplanar surface will cause molecular reorientation. This is the basis of the "reorientation mediated by translational displacements" (RMTD) relaxation mechanism. If hydrodynamic flow is superimposed on diffusion, the RMTD process will be accelerated in a sort of rotational analog to translational hydrodynamic (or Taylor-Aris) dispersion. This reveals itself by a prolongation of spin-lattice relaxation times at low frequencies. The flow-relaxation effect takes place in the vicinity of the pore surfaces on the order of nanometers. The conclusions are (i) the BMSD and RMTD relaxation mechanism of fluids in porous materials is corroborated, (ii) hydrodynamic dispersion affects molecular displacements at surfaces, and (iii) interfacial slip in the sense of a molecular hopping, i.e., a desorption-readsorption process takes place.

Hyphenation of capillary high-performance liquid chromatography to microcoil magnetic resonance spectroscopy—determination of various carotenoids in a small-sized spinach sample

The development of miniaturized hyphenated systems such as capillary high-performance liquid chromatography--and nuclear magnetic resonance spectroscopy (HPLC-NMR) remains challenging in the field of structure elucidation. In combination with a highly specific sample preparation technique, matrix solid-phase dispersion (MSPD), and a highly selective C30 reverse phase HPLC-NMR enables the identification of small amounts of natural compounds. Here, the investigation of five carotenoids in a standard solution and two carotenoids from a spinach sample demonstrate the potential of this new development. The separation of the carotenoids is performed with self-packed fused-silica capillaries with a binary solvent gradient consisting of acetone and water. The miniaturized system allows the use of fully deuterated solvents for on-line HPLC-NMR coupling. The 1H NMR spectra of the various carotenoids obtained in stopped-flow mode gave a high signal-to-noise ratio with a sample amount in the low nanogram range. All necessary parameters for structure elucidation such as multiplet structure, coupling constants and integration values can be detected unambiguously.

Microcoil nuclear magnetic resonance spectroscopy

In comparison with most analytical chemistry techniques, nuclear magnetic resonance has an intrinsically low sensitivity, and many potential applications are therefore precluded by the limited available quantity of certain types of sample. In recent years, there has been a trend, both commercial and academic, towards miniaturization of the receiver coil in order to increase the mass sensitivity of NMR measurements. These small coils have also proved very useful in coupling NMR detection with commonly used microseparation techniques. A further development enabled by small detectors is parallel data acquisition from many samples simultaneously, made possible by incorporating multiple receiver coils into a single NMR probehead. This review article summarizes recent developments and applications of "microcoil" NMR spectroscopy.

Contact-angle, ellipsometric, and spin-diffusion solid-state nuclear magnetic resonance spectroscopic investigations of copolymeric stationary phases immobilized on SiO2 surfaces

SiO2 surfaces-silica gel particles and silica wafers-were modified by covalently immobilizing three poly(ethylene-co-acrylic acid) copolymers, (-CH2CH2-)x[CH2CH/(CO2H)-]y, with different chain lengths and mass fractions of acrylic acid. 13C solid-state NMR spectroscopy on the modified silica gel particles revealed both mobile gauche and rigid trans aligned alkyl chains in the copolymers. For copolymers attached to silica wafers via a 3-aminopropyltriethoxysilane spacer molecule, ellipsometric measurements revealed a mean value of the layer thickness distribution of 6.5 and 4.3 nm, respectively, for the more acidic and the shorter copolymers with mobile alkyl chains mostly in the gauche conformation. For the longest and least acidic copolymer with more rigid trans ordered alkyl chains, however, a mean phase thickness of 10.6 nm was found. When this copolymer was immobilized via a 3-glycidoxypropyltrimethoxysilane spacer molecule we measured a mean layer thickness of 9.9 nm. A model of the surface morphology of this immobilization strategy was derived using spin-diffusion 13C NMR measurements on the corresponding modified silica. It was thereby proven that the trans and gauche-aligned alkyl chains occur in distinct domains of certain sizes on the silica surface. The surface polarity of all modified silica wafers was also investigated by measurement of contact-angle.

Development of Ultrahigh-Throughput NMR Spectroscopic Analysis Utilizing Capillary Flow NMR Technology

An ultrahigh-throughput method for acquiring 1H NMR spectra is described. By constructing a continuous flow system utilizing an HPLC pump, autosampler, and a capillary flow NMR probe, it was possible to inject samples into the NMR spectrometer every 30 s using a continuous flow rate of 30 microL/min. 1H NMR spectroscopic data were acquired continuously into a pseudo-2D data file, with a 96-well-plate completed in <50 min. Spectra in continuous flow mode were readily obtained from approximately 3.4 mug (500 MHz), while the LOD was <850 ng. There was found to be little variation in either sample broadening within the flow system or signal intensities between multiple injections. This system offers several advantages over more conventional NMR spectroscopic analyses, notably the limited solvent required, high sensitivity, high speed, and improved spectral quality as a result of reduced spectral "dead" regions resulting from residual solvent levels.

Hyphenation of Solid-Phase Extraction with Liquid Chromatography and Nuclear Magnetic Resonance: Application of HPLC-DAD-SPE-NMR to Identification of Constituents of Kanahia laniflora

The introduction of on-line solid-phase extraction (SPE) in HPLC-NMR has dramatically enhanced the sensitivity of this technique by concentration of the analytes in a small-volume NMR flow cell and by increasing the amount of the analyte by multiple peak trapping. In this study, the potential of HPLC-DAD-SPE-NMR hyphenation was demonstrated by structure determination of complex constituents of flower, leaf, root, and stem extracts of an African medicinal plant Kanahia laniflora. The technique was shown to allow acquisition of high-quality homo- and heteronuclear 2D NMR data following analytical-scale HPLC separation of extract constituents. Four flavonol glycosides [kaempferol 3-O-(6-O-alpha-l-rhamnopyranosyl)-beta-d-glucopyranoside; kaempferol 3-O-(2,6-di-O-alpha-l-rhamnopyranosyl)-beta-d-glucopyranoside; quercetin 3-O-(2,6-di-O-alpha-l-rhamnopyranosyl)-beta-d-glucopyranoside (rutin); and isorhamnetin, 3-O-(6-O-alpha-l-rhamnopyranosyl)-beta-d-glucopyranoside] and three 5alpha-cardenolides [coroglaucigenin 3-O-6-deoxy-beta-d-allopyranoside; coroglaucigenin 3-O-(4-O-beta-d-glucopyranosyl)-6-deoxy-beta-d-glucopyranoside; 3'-O-acetyl-3'-epiafroside] were identified, with complete assignments of 1H and 13C resonances based on HSQC and HMBC spectra whenever required. Confirmation of the structures was provided by HPLC-MS data. The HPLC-DAD-SPE-NMR technique therefore speeds up the dereplication of complex mixtures of natural origin significantly, by characterization of individual extract components prior to preparative isolation work.