Mass Distribution Measurement of Water-Insoluble Polymers by Charge-Reduced Electrospray Mobility Analysis

Online Bipolar Dual Spray for the Charge State Reduction and Characterization of Complex Synthetic Polymers

Charge reduction mass spectrometry (CR/MS) hyphenated to liquid chromatography (LC) couples liquid-phase compound separation and mass spectral decompression to resolve and characterize multicomponent systems. LC/CR/MS has proven to be effective for complex mixture analysis, particularly synthetic polymers. A newer charge manipulation approach called bipolar dual spray has previously been demonstrated to reduce the observed charge state distribution of ammoniated polyethene glycol. In this approach, two electrospray emitters, in close proximity and of opposite polarity, fuse droplets from their electrospray plumes, which allows the subsequent chemistry. In this work, we investigate the ability of bipolar dual spray to reduce the charge of synthetic polyols, thereby simplifying complex mixture analysis and generating new compositional information only available through the coupling of charge reduction with LC/MS analysis. This work also represents the first demonstration of online charge reduction via dual spray. Polyethylene glycol (PEG) 7.2K subjected to LC/MS with dual spray reduced the average charge state from 8.2+ to 4.4+. LC/MS with dual spray was also applied to the characterization of an end-group-modified PEG 10K (i.e., aminated) containing several reaction impurities. This approach allowed for the identification of low-level starting material, tosylated PEG, and PEG mono(amine), where both LC/MS and direct infusion dual spray did not detect the impurities. Overall, the results demonstrated that bipolar dual spray can be incorporated into an LC/MS analysis and affords the ability to reduce the charge state distribution of PEG cations, decompress the m/z axis, lower spectra complexity, and enable/simplify data interpretation.

The charge reduction rate for multiply charged polymer ions via ion-ion recombination at atmospheric pressure

The charge reduction of multiply charged macromolecular ions via recombination with small ions in the gas phase is commonly employed to modulate the charge on macromolecules prior to mass spectrometric and mobility analyses. We employ a recently developed continuum-Molecular Dynamics (MD) calculation approach to determine the recombination rate coefficient of multiply charged (1 to 7 excess positive charged) polyethylene glycol ions (mass of 4600 Da) with smaller singly charged anions, modeled as NO₂^- ions. The continuum-MD approach accounts explicitly for the influence of the background gas on the recombination process, accounts explicitly for ion translational, vibrational, and rotational motion, and enables recombination rate coefficient calculation in nitrogen near atmospheric pressure, wherein neither low pressure nor high pressure recombination theories are strictly applicable. Continuum-MD simulations yield recombination rate coefficients near 3.9 × 10^-14 m³ s^-1 for singly charged ions, increasing to 3.0 × 10^-11 m³ s^-1 for the +7 ion. Pre-existing collision rate coefficient expressions for rigid ions are found to be within a factor of 2-5 of calculations for all charge states, but their use requires knowledge of an appropriate collision distance, which is not well-defined for flexible polymer ions. Continuum-MD-inferred rate coefficients are incorporated into a model of charge reduction, and the charge state distribution versus anion concentration determined with it is compared to charge reduction measurements made via atmospheric pressure differential mobility analysis. Good agreement is observed between simulations and experiments; although results are extremely sensitive to the recombination rate coefficients, experimental results are bound by models utilizing rates within a factor of 2 (0.5-2.0×) of the continuum-MD rates.

Microdroplet Fusion Chemistry for Charge State Reduction of Synthetic Polymers via Bipolar Dual Spray with Anionic Reagents

Microdroplet fusion chemistry is an emerging area of analyte manipulation that utilizes the ion source region of a mass spectrometer to covalently derivatize or manipulate the charge state distribution. This technique utilizes two electrospray emitters in close proximity, where the droplets from each electrospray plume fuse and undergo the subsequent chemistry. In this study, microdroplet fusion chemistry via bipolar dual spray has demonstrated the ability to reduce the average charge state of polyethylene glycol (PEG) cations using anionic reagents. Bipolar dual spray was implemented on a commercial mass spectrometer with limited hardware modifications to the ion source. Reagents including ammonium hydroxide, formic acid, and lithium chloride showed dramatic shifts in the average charge state of PEG 3.8 K cations (e.g., 5.0+ to 2.5+) along with the emergence of newly detected charge states. An organic base, tributylamine, had no effect on the charge state distribution of PEG 3.8 K cations. These results were consistent with an ion-pairing mechanism, where reagent anions destabilized ammonium cation interactions with PEG 3.8 K upon droplet fusion from the negative and positive emitters. Additional bipolar dual spray experiments with PEG 12.6 K demonstrated the ability to transform uninterpretable mass information into distinct charge states ranging from [M+8NH₄]⁺ to [M+3NH₄]⁺. Overall, this study provides insight into the nature of dual spray chemistry and will aid future experimental design in microdroplet covalent chemistry.

Gas molecule scattering & ion mobility measurements for organic macro-ions in He versus N2 environments

A pending issue in linking ion mobility measurements to ion structures is that the collisional cross section (CCS, the measured structural parameter in ion mobility spectrometry) of an ion is strongly dependent upon the manner in which gas molecules effectively impinge on and are reemitted from ion surfaces (when modeling ions as fixed structures). To directly examine the gas molecule impingement and reemission processes and their influence, we measured the CCSs of positively charged ions of room temperature ionic liquids 1-ethyl-3-methylimidazolium dicyanamide (EMIM-N(CN)2) and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM-BF4) in N2 using a differential mobility analyzer-mass spectrometer (DMA-MS) and in He using a drift tube mobility spectrometer-mass spectrometer (DT-MS). Cluster ions, generated via electrosprays, took the form (AB)N(A)z, spanning up to z = 20 and with masses greater than 100 kDa. As confirmed by molecular dynamics simulations, at the measurement temperature (∼300 K), such cluster ions took on globular conformations in the gas phase. Based upon their attained charge levels, in neither He nor N2 did the ion-induced dipole potential significantly influence gas molecule-ion collisions. Therefore, differences in the CCSs measured for ions in the two different gases could be primarily attributed to differences in gas molecule behavior upon collision with ions. Overwhelmingly, by comparison of predicted CCSs with selected input impingement-reemission laws to measurements, we find that in N2, gas molecules collide with ions diffusely--they are reemitted at random angles relative to the gas molecule incoming angle--and inelastically. Meanwhile, in He, gas molecules collide specularly and elastically and are emitted from ion surfaces at determined angles. The results can be rationalized on the basis of the momentum transferred per collision; in the case of He, individual gas molecule collisions minimally perturb the atoms within a cluster ion (internal motion), while in the case of N2, individual gas molecules have sufficiently large momentum to alter the internal motion in organic ions.

Nanomaterial size distribution analysis via liquid nebulization coupled with ion mobility spectrometry (LN-IMS)

Ion mobility spectrometry is used for nanomaterial size distribution measurement without the need of electrospray based aerosolization.

The collision cross sections of iodide salt cluster ions in air via differential mobility analysis-mass spectrometry

To date, most collision cross section (CCS) predictions have invoked gas molecule impingement-reemission rules in which specular and elastic scattering of spherical gas molecules from rigid polyatomic surfaces are assumed. Although such predictions have been shown to agree well with CCSs measured in helium bath gas, a number of studies reveal that these predictions do not agree with CCSs for ions in diatomic gases, namely, air and molecular nitrogen. To further examine the validity of specular-elastic versus diffuse-inelastic scattering models, we measured the CCSs of positively charged metal iodide cluster ions of the form [MI]n[M(+)]z, where M = Na, K, Rb, or Cs, n = 1 - 25, and z = 1 - 2. Measurements were made in air via differential mobility analysis mass spectrometry (DMA-MS). The CCSs measured are compared with specular-elastic as well as diffuse-inelastic scattering model predictions with candidate ion structures determined from density functional theory. It is found that predictions from diffuse-inelastic collision models agree well (within 5%) with measurements from sodium iodide cluster ions, while specular-elastic collision model predictions are in better agreement with cesium iodide cluster ion measurements. The agreement with diffuse-inelastic and specular-elastic predictions decreases and increases, respectively, with increasing cation mass. However, even when diffuse-inelastic cluster ion predictions disagree with measurements, the disagreement is of a near-constant factor for all ions, indicating that a simple linear rescaling collapses predictions to measurements. Conversely, rescaling cannot be used to collapse specular-elastic predictions to measurements; hence, although the precise impingement reemission rules remain ambiguous, they are not specular-elastic.

Physical analysis of virus particles using electrospray differential mobility analysis

This review critically examines an emerging tool to measure viral clearance from biomanufacturing streams, monitor assembly of viruses and virus-like particles, rapidly identify viruses from biological milieu, assay virus neutralization, and prepare bionanoconjugates for bacterial detection. Electrospray differential mobility analysis (ES-DMA) is a tool of choice to simultaneously determine viral size and concentration because it provides full multimodal size distributions with subnanometer precision from individual capsid proteins to intact viral particles. The review contrasts ES-DMA to similar tools and highlights expected growth areas including at-line process sensing as a process analytical technology (PAT), bioseparating as a distinct unit operation, monitoring viral reactions, and interrogating virus-host protein interactions.

Flow interface for charge-reduced electrospray of nanoparticle solutions

A charge reduction (CR) interface for electrospray ionization that permits simultaneous analysis of nanoparticle solutions by multiple detection methods was characterized. In the direct infusion configuration, a constant flow of analyte solution undergoes electrospray ionization (ESI). The charged aerosol is sampled directly into the atmospheric pressure inlet of a quadrupole time-of-flight mass spectrometer and into a CR device followed by a differential mobility analyzer (DMA) and condensation particle counter (CPC). In the plug injection configuration, analyte solution is injected into a liquid chromatograph. The effluent is split to an evaporative light scattering detector (ELSD) and the ESI interface. The charged aerosol is then sampled through the CR device directly into the CPC. Performance characteristics of the two configurations were studied with sucrose and protein solutions. When a liquid flow rate in the low microliter per minute range was used, the reconstructed droplet size distribution from the ESI interface had an average diameter of 184 nm with a geometric standard deviation of 1.4. For the first configuration, the linear working range was wider for ESI-MS than the CR device-DMA-CPC. For the second configuration, the detection efficiency, defined as the fraction of molecules flowing through the ESI interface that are ultimately detected by the CPC, was on the order of 10(-6). Simultaneous measurements with the ELSD and CPC were consistent with analyte molecular size and may provide a means of estimating the size of unknown particles.

The potential of differential mobility analysis coupled to MS for the study of very large singly and multiply charged proteins and protein complexes in the gas phase

As previously demonstrated by the technique of gas-phase electrophoretic mobility molecular analyzer (GEMMA) introduced by Kaufman and colleagues, differential mobility analysis (DMA) of charge-reduced electrospray ions in the gas phase is a useful complement to MS for studying large proteins and their weakly bound complexes. Several limitations of GEMMA, the solutions for which have the potential to greatly improve its performance, are discussed here, including DMA resolution and transmission. A quantitative theory of charge reduction kinetics for dried multiply charged globular proteins at atmospheric pressures is also presented, showing that the charge reduction time must be carefully chosen to maximize a singly charged ion signal, while avoiding survival of contaminating multiply charged species. Because charge reduction limits the range of masses analyzable by MS, we also consider the potential of a parallel-plate DMA coupled in series to an MS for DMA-MS studies without charge reduction.

Aerosol size standards in the nanometer size range

A technique for generating charged aerosols of polystyrene (pSty) with narrow size distributions has been developed. It is based on electrospraying commercial narrow mass standards of pSty dissolved in l-methyl-2-pyrrolidone (NMP) seeded with the newly synthesized salt dimethyl ammonium formate. This salt imparts a much larger electrical conductivity than previously known NMP electrolytes, leading to higher quality sprays with greatly reduced attachment of impurities. Controlling the solute concentration enables forming polystyrene particles containing from one up to more than ten single polystyrene molecules, whereby 4 mass standards with molecular weights from 9200 up to 96,000 g/mol yield particles covering densely the diameter range from 3 to 11 nm. Combined mobility and mass measurement with a differential mobility analyzer and a mass spectrometer in tandem are carried out with a pSty sample 9200 amu in molecular weight. They fix directly the mass versus mobility relation near 9200 amu, and indirectly for the other standards and their clusters. The apparent particle density resulting from mobility versus mass data agrees with the bulk density of the polymer, indicating that the particles are dense and spherical. Although these standards have been studied only in gaseous suspension, their injection in liquids such as water where pSty is insoluble should keep them spherical.